PSA-LIN-MIB

All MIBs › PSA-LIN-MIB

Category: Server Hardware Monitoring

Description: Defines NEC ESMPRO ServerAgents Linux platform base OID structure for server hardware monitoring on Linux systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is PSA-LIN-MIB?

This NEC ESMPRO ServerAgent MIB defines the Linux-platform branch of NEC's server management OID tree, exposing hardware and OS-level status for NEC servers running Linux. It covers general categories such as CPU inventory, memory/swap sizing, and network-interface identity — combining hardware inventory with basic OS resource data. It is used to monitor the hardware and software status of a Linux-based NEC server: the number of logical CPUs and per-CPU details (linLogicalCpuEntry), total memory and swap size (linLgMemSize/linLgMemSwapSize), and each network interface's MAC/IP address (linNetworkInterfaceEntry), giving an administrator a way to detect a downed NIC, unexpected memory/swap configuration, or CPU count mismatch after hardware changes. It functions as the Linux-specific base structure underneath NEC's broader ESMPRO ServerAgent MIB family, which includes companion trap MIBs (e.g., PSA-LinIntelixgbeTrap-MIB) layered for specific drivers on the same platform. It is deployed on NEC Express5800/SIGMABLADE servers running Linux with the ESMPRO ServerAgent installed, in data centers that want SNMP-based hardware inventory and basic resource visibility for Linux hosts. Engineers can download the PSA-LIN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in PSA-LIN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu PRIMEQUEST server partition running Linux (ESMPRO ServerAgent CPU/memory/NIC inventory)

Monitoring Examples

An admin polls linLogcalCpuTable/linLogicalCpuEntry (keyed by linLgCpuNumber) alongside linNumOfLogicalCpus to confirm the expected CPU count is visible to the OS, and checks linLgMemSize/linLgMemSwapSize to verify memory and swap allocation match provisioning. Walking linNetworkInterfaceTable/linNetworkInterfaceEntry (linNIIndex, linNIMACAddress, linNIIPAddress) reveals whether a network interface has lost its IP binding or shows an unexpected MAC address, which would indicate a NIC or configuration fault.

What Can Be Monitored

logical CPU count/inventory
memory size
swap size
network interface MAC address
network interface IP address

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises
mgmt

From RFC1213-MIB

DisplayString
PhysAddress
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
fujitsu	1.3.6.1.4.1.211
iaServer	1.3.6.1.4.1.211.1.31
linHardwareResourceEntry	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1		not-accessible
linHardwareResourceInfo	1.3.6.1.4.1.211.1.31.1.2.100.2.5
linHardwareResourceTable	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1		not-accessible
STR linHWRAdapterName	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.9	DisplayString	read-only	Adapter name id of the device.
INT linHWRBusNumber	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.3	INTEGER	read-only	Bus number of the device.
INT linHWRBusType	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.1	INTEGER	read-only	Bus type of the device. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci
OCT linHWRClass	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.11	OCTET STRING	read-only	Device classification; according to the PCI classification scheme. Byte Contents 0 BaseClass 1 SubClass 2 ProgIf
INT linHWRDeviceNumber	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.4	INTEGER	read-only	Device number of the device.
INT linHWRFunction	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.5	INTEGER	read-only	Function number of the device.
STR linHWRIoPort	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.8	DisplayString	read-only	I/O port area used the device.
INT linHWRIRQ	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.7	INTEGER	read-only	Interrupt number used the device.
STR linHWRMemArea	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.6	DisplayString	read-only	Memory area used the device.
INT linHWRSegment	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.2	INTEGER	read-only	Segment number of the device.
STR linHWRVendor	1.3.6.1.4.1.211.1.31.1.2.100.2.5.1.1.10	DisplayString	read-only	Vendor id of the device.
linIPv6NetworkInterfaceEntry	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1		not-accessible
linIPv6NetworkInterfaceTable	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3		not-accessible	Table with IPv6 network interface information.
INT linIPv6NIBusNumber	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.13	INTEGER	read-only	Bus number of the IPv6 network interface.
INT linIPv6NIBusType	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.11	INTEGER	read-only	Bus type of the IPv6 network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci
INT linIPv6NIDADStatus	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.9	INTEGER	read-only	IPv6 network interface DAD Status. Refer to the following definitions; value contents 0 The IP address is the preferred address. 4 The IP address is the optimistic address. 32 The IP address has been deprecated. 64 The DAD state is tentative.
INT linIPv6NIDeviceNumber	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.14	INTEGER	read-only	Device number of the IPv6 network interface.
INT linIPv6NIFunction	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.15	INTEGER	read-only	Function number of the IPv6 network interface.
INT linIPv6NIIndex	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.1	INTEGER	read-only	IPv6 Network inteface identification number.
STR linIPv6NIInterfaceName	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.5	DisplayString	read-only	IPv6 Network interface name.(e.g.eth0).
OCT linIPv6NIIPAddress	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.3	OCTET STRING	read-only	IPv6 address of the network interface. This object returns IPv6 address of 16 bytes binary data.
STR linIPv6NIIPAddress2	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.4	DisplayString	read-only	IPv6 address of the network interface. This object returns IPv6 address of text string format
CTR linIPv6NIIpPacketsIn	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.17	Counter	read-only
CTR linIPv6NIIpPacketsOut	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.18	Counter	read-only
INT linIPv6NILinkStatus	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.19	INTEGER	read-only	The current link state of the IPv6 interface. If 0; link status is unknown.
PHY linIPv6NIMACAddress	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.2	PhysAddress	read-only	The interface address of the physical layer of the IPv6 network.
INT linIPv6NINetworkType	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.10	INTEGER	read-only	IPv6 network interface type. The network type definition are assigned by the IANA.
STR linIPv6NIPhysicalID	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.20	DisplayString	read-only	Identification name of IPv6 network interface cand.
INT linIPv6NIPrefix	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.7	INTEGER	read-only	IPv6 network interface prefix
INT linIPv6NIScope	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.8	INTEGER	read-only	IPv6 network interface scope. Refer to the following definitions; value contents 0 global 16 loopback 32 link 64 site
INT linIPv6NISegment	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.12	INTEGER	read-only	Segment number of the IPv6 network interface.
INT linIPv6NISpeed	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.6	INTEGER	read-only	IPv6 Network speed.(unit:Mbit/s)
INT linIPv6NIStatus	1.3.6.1.4.1.211.1.31.1.2.100.2.4.3.1.16	INTEGER	read-only	The current operational state of the IPv6 interface. The testing(3) state indicates that no operational packets can be passed.
INT linLgCpuNumber	1.3.6.1.4.1.211.1.31.1.2.100.2.1.1.1.1	INTEGER	read-only	Logical identification number that OS allots to the CPU.(index: 0based)
INT linLgMemSize	1.3.6.1.4.1.211.1.31.1.2.100.2.2.1	INTEGER	read-only	Memory size of the partition.(unit:Mbyte)
INT linLgMemSwapSize	1.3.6.1.4.1.211.1.31.1.2.100.2.2.2	INTEGER	read-only	Swap size of the partition.(unit:Mbyte)
linLogcalCpuTable	1.3.6.1.4.1.211.1.31.1.2.100.2.1.1		not-accessible	Table with logical CPU information
linLogicalCpuEntry	1.3.6.1.4.1.211.1.31.1.2.100.2.1.1.1		not-accessible
linLogicalCpuInfo	1.3.6.1.4.1.211.1.31.1.2.100.2.1
linLogicalMemoryInfo	1.3.6.1.4.1.211.1.31.1.2.100.2.2
linNetworkInfo	1.3.6.1.4.1.211.1.31.1.2.100.2.4
linNetworkInterfaceEntry	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1		not-accessible
linNetworkInterfaceTable	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1		not-accessible	Table with network interface information.
INT linNIBusNumber	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.10	INTEGER	read-only	Bus number of the network interface.
INT linNIBusType	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.8	INTEGER	read-only	Bus type of the network interface. Refer to the following definitions; value contens 0 other 1 isa 2 eisa 3 pci
INT linNIDeviceNumber	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.11	INTEGER	read-only	Device number of the network interface.
INT linNIFunction	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.12	INTEGER	read-only	Function number of the network interface.
INT linNIIndex	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.1	INTEGER	read-only	Network inteface identification number.
STR linNIInterfaceName	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.4	DisplayString	read-only	Network interface name.(e.g.eth0).
OCT linNIIPAddress	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.3	OCTET STRING	read-only	IP address of the network interface.
STR linNIIPAddress2	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.18	DisplayString	read-only	IP address of the network interface. Please use this object instead of 'linNIIPAddress'.
CTR linNIIpPacketsIn	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.14	Counter	read-only
CTR linNIIpPacketsOut	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.15	Counter	read-only
INT linNILinkStatus	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.16	INTEGER	read-only	The current link state of the interface. If 0; link status is unknown.
PHY linNIMACAddress	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.2	PhysAddress	read-only	The interface address of the physical layer of the network.
INT linNINetworkType	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.7	INTEGER	read-only	Network interface type. The network type definition are assigned by the IANA.
STR linNIPhysicalID	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.17	DisplayString	read-only	Identification name of Network Interface cand.
INT linNISegment	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.9	INTEGER	read-only	Segment number of the network interface.
INT linNISpeed	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.5	INTEGER	read-only	Network speed.(unit:Mbit/s)
INT linNIStatus	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.13	INTEGER	read-only	The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
OCT linNISubNetMask	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.6	OCTET STRING	read-only	Subnet address of the network interface.
STR linNISubNetMask2	1.3.6.1.4.1.211.1.31.1.2.100.2.4.1.1.19	DisplayString	read-only	Subnet address of the network interface. Please use this object instead of 'linNISubNetMask'.
INT linNumOfLogicalCpus	1.3.6.1.4.1.211.1.31.1.2.100.2.1.6	INTEGER	read-only	Number of effective logical CPUs in the partition.
linOperatingSystemInfo	1.3.6.1.4.1.211.1.31.1.2.100.2.6
INT linOSAverageUsageRate	1.3.6.1.4.1.211.1.31.1.2.100.2.6.6	INTEGER	read-only	The average system usage rate over all processors since startup.(unit:%)
INT linOSLoginCurrentValue	1.3.6.1.4.1.211.1.31.1.2.100.2.6.5	INTEGER	read-only	Number of current login users to the partition.
STR linOSName	1.3.6.1.4.1.211.1.31.1.2.100.2.6.1	DisplayString	read-only	Operating system name that running on the partition.
INT linOSRunlevel	1.3.6.1.4.1.211.1.31.1.2.100.2.6.7	INTEGER	read-only	The current runlevel of the partition.
CTR linOSRunTime	1.3.6.1.4.1.211.1.31.1.2.100.2.6.3	Counter	read-only	Current partition up time.(unit:sec)
STR linOSSystemTime	1.3.6.1.4.1.211.1.31.1.2.100.2.6.4	DisplayString	read-only	Current date and time as visible string.
STR linOSVersion	1.3.6.1.4.1.211.1.31.1.2.100.2.6.2	DisplayString	read-only	Operating system version that running on the partition.
linRoutingEntry	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1		not-accessible
linRoutingTable	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2		not-accessible	Table with routing information
OCT linRTDestination	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.3	OCTET STRING	read-only	The destination IP address of this route.
STR linRTDestination2	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.7	DisplayString	read-only	The destination IP address of this route. Please use this object instead of 'linRTDestination'.
INT linRTIndex	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.1	INTEGER	read-only	Routing identification number.
STR linRTInterfaceName	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.2	DisplayString	read-only	Network interface name.(e.g.eth0).
OCT linRTNextHop	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.4	OCTET STRING	read-only	The IP address of the next hop of this route.
STR linRTNextHop2	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.8	DisplayString	read-only	The IP address of the next hop of this route. Please use this object instead of 'linRTNextHop'.
OCT linRTRouteMask	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.6	OCTET STRING	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the linRTDestination field.
STR linRTRouteMask2	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.9	DisplayString	read-only	Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the linRTDestination2 field. Please use this object instead of 'linRTRouteMask'.
OCT linRTRouteType	1.3.6.1.4.1.211.1.31.1.2.100.2.4.2.1.5	OCTET STRING	read-only	The type of route. Refer to the following definition. Byte field Contents 0x0001 route unable 0x0002 destination is a gateway 0x0004 host entry (net otherwise) 0x0008 reinstate route after tmout 0x0010 created dyn. (by redirect) 0x0020 modified dyn. (by redirect) 0x0040 specific MTU for this route 0x0080 per route window clamping 0x0100 Initial round trip time 0x0200 Reject route 0x0400 this route isn't cached
logicalComponentForLinux	1.3.6.1.4.1.211.1.31.1.2.100.2
logicalComponentForWindows	1.3.6.1.4.1.211.1.31.1.2.100.3
monitoringFunction	1.3.6.1.4.1.211.1.31.1.2.100.4
otherFunction	1.3.6.1.4.1.211.1.31.1.2.100.7
partition	1.3.6.1.4.1.211.1.31.1.2
partitionCommon	1.3.6.1.4.1.211.1.31.1.2.100
physicalComponent	1.3.6.1.4.1.211.1.31.1.2.100.1
primequest	1.3.6.1.4.1.211.1.31.1
products	1.3.6.1.4.1.211.1
pxFunction	1.3.6.1.4.1.211.1.31.1.2.100.8
statusFunction	1.3.6.1.4.1.211.1.31.1.2.100.6
thresholdFunction	1.3.6.1.4.1.211.1.31.1.2.100.5

RFC description

A proprietary MIB for managing and monitoring packet stream analyzer or linux-based appliance statistics through SNMP, providing visibility into network packet analysis and system performance metrics.

Start monitoring Fujitsu PRIMEQUEST server partition running Linux (ESMPRO ServerAgent CPU/memory/NIC inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download PSA-LIN-MIB

What Is PSA-LIN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description