CALIX-EOAM-EXT-MIB

All MIBs › CALIX-EOAM-EXT-MIB

Organization: CALIX, Inc

Last Updated: 2011-01-24

Category: DSL and Broadband, Vendor: Calix

Description: Provides Ethernet OAM (802.3ah) extensions for link monitoring and fault management on Calix broadband access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CALIX-EOAM-EXT-MIB?

CALIX-EOAM-EXT-MIB is a Calix proprietary MIB extending IEEE 802.3ah Link OAM (EFM) and IEEE 802.1ag/ITU-T Y.1731 Service OAM (CFM) support on Calix access equipment. Its Maintenance-Entity-Group (MEG) table records identifier, name, level, CCM interval, VLAN ID, auto-discovery enable/timeout, CCI interworking, ID-permission mode, and row status, a MIP (Maintenance Intermediate Point) table records identifier, ifIndex, admin state, MAC address, and a reset-statistics action, and a MIP-statistics table reports loopback message/reply counts by direction. As a configuration/protocol-status MIB it lets an administrator confirm CFM MEG level and CCM interval match the carrier's OAM hierarchy. It is deployed on Calix carrier access equipment. Engineers can download the CALIX-EOAM-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CALIX-EOAM-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Calix carrier access equipment

Monitoring Examples

An administrator checks calixSoamExtMegLevel and MegCcmInterval to confirm CFM maintenance-domain settings match the carrier's OAM hierarchy on a Calix access platform.

What Can Be Monitored

CFM MEG/MIP configuration and loopback statistics

Imported Objects

From IEEE8021-CFM-MIB

Dot1agCfmCcmInterval
Dot1agCfmIdPermission
Dot1agCfmMDLevel
Dot1agCfmMepId
Dot1agCfmMepIdOrZero
Dot1agCfmMpDirection
Dot1agCfmPbbComponentIdentifier
dot1agCfmLtrReceiveOrder	OBJECT-TYPE
dot1agCfmLtrSeqNumber	OBJECT-TYPE
dot1agCfmMaComponentId	OBJECT-TYPE
dot1agCfmMaIndex	OBJECT-TYPE
dot1agCfmMaMepListIdentifier	OBJECT-TYPE
dot1agCfmMdIndex	OBJECT-TYPE
dot1agCfmMepDbRMepIdentifier	OBJECT-TYPE
dot1agCfmMepIdentifier	OBJECT-TYPE

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From LLDP-MIB

LldpChassisId
LldpChassisIdSubtype
LldpPortId
LldpPortIdSubtype

From Q-BRIDGE-MIB

VlanId
VlanIdOrNone

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TAddress
TDomain
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using calixSoamExtMipStatsLbmIn OID:

Select a Calix carrier access equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type calixSoamExtMipStatsLbmIn into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of LBMs received by this MIP. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
calixEoamExtConfig	1.3.6.1.4.1.6321.1.99.1
calixEoamExtMIB	1.3.6.1.4.1.6321.1.99			A MIB module that extends the support of Ethernet OAM standards. Extensions are made to IEEE 802.3ah MIB for Link OAM or EFM (Ethernet First Mile) functionality, IEEE 802.1ag MIB for Service OAM or CFM (Connection Fault Management) functionality, including ITU-T Y.1731 entities. This version is compatible with Interport SOAM release 3.0.
CAL calixLoamExtCfgAdminState	1.3.6.1.4.1.6321.1.99.1.11.1.2	CalixEoamEnableType	read-write	State of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
calixLoamExtCfgEntry	1.3.6.1.4.1.6321.1.99.1.11.1		not-accessible	General Link OAM Configuration Table.
U32 calixLoamExtCfgIndex	1.3.6.1.4.1.6321.1.99.1.11.1.1	Unsigned32	read-create	Index of auto instantiated configuration MIB. Must be 1.
calixLoamExtCfgTable	1.3.6.1.4.1.6321.1.99.1.11		not-accessible	This table contains settings for enabling/disabling the Link OAM feature.
CAL calixRfc2544CfgAdminState	1.3.6.1.4.1.6321.1.99.1.12.1.2	CalixEoamEnableType	read-create	Administrative state of the RFC 2544 Reflector.
calixRfc2544CfgEntry	1.3.6.1.4.1.6321.1.99.1.12.1		not-accessible	Only one port can be in RFC 2544 Reflector Mode at any given time.
NUM calixRfc2544CfgIfIndex	1.3.6.1.4.1.6321.1.99.1.12.1.3	InterfaceIndex	read-write	This attributes specifies the interface index for the port in RFC 2544 Reflector Mode.
U32 calixRfc2544CfgIndex	1.3.6.1.4.1.6321.1.99.1.12.1.1	Unsigned32	read-create	Index of auto instantiated RFC 2544 configuration MIB. Must be 1.
MAC calixRfc2544CfgMacAddress	1.3.6.1.4.1.6321.1.99.1.12.1.5	MacAddress	read-write	Destination MAC address of frames to reflect.
calixRfc2544CfgTable	1.3.6.1.4.1.6321.1.99.1.12		not-accessible	This table places a port in RFC2544 Reflector Mode.
VLA calixRfc2544CfgVlanId	1.3.6.1.4.1.6321.1.99.1.12.1.4	VlanId	read-write	VLAN ID of Service.
CAL calixSoamExtCfgAdminState	1.3.6.1.4.1.6321.1.99.1.10.1.2	CalixEoamEnableType	read-create	State of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
CAL calixSoamExtCfgCcmOptTlvIfStatus	1.3.6.1.4.1.6321.1.99.1.10.1.10	CalixEoamEnableType	read-create	Enable to include Interface Status TLV in CCM messages.
CAL calixSoamExtCfgCcmOptTlvPortStatus	1.3.6.1.4.1.6321.1.99.1.10.1.9	CalixEoamEnableType	read-create	Enable to include Port Status TLV in CCM messages.
CAL calixSoamExtCfgCcmOptTlvSenderId	1.3.6.1.4.1.6321.1.99.1.10.1.8	CalixEoamEnableType	read-create	Enable to include sender ID TLV in CCM messages.
LLD calixSoamExtCfgChassisId	1.3.6.1.4.1.6321.1.99.1.10.1.5	LldpChassisId	read-create	Chassis ID.
LLD calixSoamExtCfgChassisIdSubtype	1.3.6.1.4.1.6321.1.99.1.10.1.4	LldpChassisIdSubtype	read-create	Chassis ID Subtype.
CAL calixSoamExtCfgDmmOptTlvData	1.3.6.1.4.1.6321.1.99.1.10.1.15	CalixEoamEnableType	read-create	Enable to include Data TLV in DMM messages.
calixSoamExtCfgEntry	1.3.6.1.4.1.6321.1.99.1.10.1		not-accessible	General Service OAM Configuration Table.
U32 calixSoamExtCfgIndex	1.3.6.1.4.1.6321.1.99.1.10.1.1	Unsigned32	read-create	Index of auto instantited configuration MIB. Must be 1.
CAL calixSoamExtCfgLbmOptTlvData	1.3.6.1.4.1.6321.1.99.1.10.1.14	CalixEoamEnableType	read-create	Enable to include Data TLV in LBM messages.
CAL calixSoamExtCfgLbmOptTlvIfStatus	1.3.6.1.4.1.6321.1.99.1.10.1.13	CalixEoamEnableType	read-create	Enable to include Interface Status TLV in LBM messages.
CAL calixSoamExtCfgLbmOptTlvSenderId	1.3.6.1.4.1.6321.1.99.1.10.1.12	CalixEoamEnableType	read-create	Enable to include Sender ID TLV in LBM messages.
CAL calixSoamExtCfgLtmOptTlvSenderId	1.3.6.1.4.1.6321.1.99.1.10.1.11	CalixEoamEnableType	read-create	Enable to include Sender ID TLV in LTM messages.
ADR calixSoamExtCfgManAddress	1.3.6.1.4.1.6321.1.99.1.10.1.7	TAddress	read-create	Management Address.
TDO calixSoamExtCfgManAddressDomain	1.3.6.1.4.1.6321.1.99.1.10.1.6	TDomain	read-create	Management Domain.
DOT calixSoamExtCfgPermission	1.3.6.1.4.1.6321.1.99.1.10.1.3	Dot1agCfmIdPermission	read-create	Default permission level determining which optional TLVs to include.
calixSoamExtCfgTable	1.3.6.1.4.1.6321.1.99.1.10		not-accessible	This table contains Unicast Loopback protocol results for corresponding MEP.
CAL calixSoamExtMegAutoDiscovery	1.3.6.1.4.1.6321.1.99.1.1.1.6	CalixEoamEnableType	read-create	Specifies if MEP autodiscovery feature is enabled or not for this particular MEG.
U32 calixSoamExtMegAutoDiscoveryTimeout	1.3.6.1.4.1.6321.1.99.1.1.1.7	Unsigned32	read-create	The timeout value for removal of peer MEPs added through autodetection if no CCM frames are received from that peer MEP.
CAL calixSoamExtMegCciInterworking	1.3.6.1.4.1.6321.1.99.1.1.1.8	CalixEoamEnableType	read-create	Specifies if IEEE 802.1ag compatibility mode is enabled on this MEG.
NUM calixSoamExtMegCcmInterval	1.3.6.1.4.1.6321.1.99.1.1.1.4	Dot1agCfmCcmInterval	read-create	Interval between CCM transmissions to be used by all MEPs in the MEG.
calixSoamExtMegEntry	1.3.6.1.4.1.6321.1.99.1.1.1		not-accessible	The ITU-T Y.1731 MEG entry.
U32 calixSoamExtMegIdentifier	1.3.6.1.4.1.6321.1.99.1.1.1.1	Unsigned32	not-accessible	Index of the MEG entry in the MEG table. There is a common indexing space shared between MAs (IEEE 802.1ag) and MEGs(ITU-T Y.1731).
DOT calixSoamExtMegIdPermission	1.3.6.1.4.1.6321.1.99.1.1.1.9	Dot1agCfmIdPermission	read-create	Enumerated value indicating what, if anything, is to be included in the Sender ID TLV transmitted by MPs configured in this MEG. The value sendIdDefer is not allowed.
DOT calixSoamExtMegLevel	1.3.6.1.4.1.6321.1.99.1.1.1.3	Dot1agCfmMDLevel	read-create	Level for the MEG.
OCT calixSoamExtMegName	1.3.6.1.4.1.6321.1.99.1.1.1.2	OCTET STRING	read-create	Textual name of the MEG.
ROW calixSoamExtMegRowStatus	1.3.6.1.4.1.6321.1.99.1.1.1.10	RowStatus	read-create	The status of the row. This field should be used to create or remove a MEG from the system.
calixSoamExtMegTable	1.3.6.1.4.1.6321.1.99.1.1		not-accessible	This table contains all ITU-T Y.1731 MEG entries in the system.
U32 calixSoamExtMegVid	1.3.6.1.4.1.6321.1.99.1.1.1.5	Unsigned32	read-create	The Primary VLAN ID with which the MEG is associated, or 0 if the MEG is not attached to any VID. If the MEG is associated with more than one VID, the dot1agCfmVlanTable lists them.
CAL calixSoamExtMepDmExtActive	1.3.6.1.4.1.6321.1.99.1.4.1.1	CalixEoamEnableType	read-create	Use to enable delay measurement.
U32 calixSoamExtMepDmExtAvgRoundTripDelay	1.3.6.1.4.1.6321.1.99.1.4.1.15	Unsigned32	read-only	The average round trip delay for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtAvgRoundTripDelayVariation	1.3.6.1.4.1.6321.1.99.1.4.1.18	Unsigned32	read-only	The average round trip delay variation for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtAvgRoundTripProcessingDelay	1.3.6.1.4.1.6321.1.99.1.4.1.21	Unsigned32	read-only	The average processing delay for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtAvgRtdThrClr	1.3.6.1.4.1.6321.1.99.1.4.1.10	Unsigned32	read-create	The average round trip delay threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepDmExtAvgRtdThrSet	1.3.6.1.4.1.6321.1.99.1.4.1.9	Unsigned32	read-create	The average round trip delay threshold upon which an alarm is to be raised.
U32 calixSoamExtMepDmExtAvgRtdVarThrClr	1.3.6.1.4.1.6321.1.99.1.4.1.14	Unsigned32	read-create	The average round trip delay variation threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepDmExtAvgRtdVarThrSet	1.3.6.1.4.1.6321.1.99.1.4.1.13	Unsigned32	read-create	The average round trip delay variation threshold upon which an alarm is to be raised.
U32 calixSoamExtMepDmExtClassOfService	1.3.6.1.4.1.6321.1.99.1.4.1.5	Unsigned32	read-create	Specifies the class of service for which the DMM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
U32 calixSoamExtMepDmExtDataLength	1.3.6.1.4.1.6321.1.99.1.4.1.24	Unsigned32	read-create	Length of data TLV in delay measurement frame.
U32 calixSoamExtMepDmExtDataPattern	1.3.6.1.4.1.6321.1.99.1.4.1.25	Unsigned32	read-create	Data pattern copied into data TLV.
T/F calixSoamExtMepDmExtDestIsMepId	1.3.6.1.4.1.6321.1.99.1.4.1.4	TruthValue	read-create	True indicates that MEP ID of the target MEP is used for DM transmission. False indicates that unicast destination MAC address of the target MEP is used for DM transmission.
MAC calixSoamExtMepDmExtDestMacAddress	1.3.6.1.4.1.6321.1.99.1.4.1.2	MacAddress	read-create	The Target MAC Address field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepDmExtDestIsMepId is 'False'.
DOT calixSoamExtMepDmExtDestMepId	1.3.6.1.4.1.6321.1.99.1.4.1.3	Dot1agCfmMepIdOrZero	read-create	The MEP ID of remote MEP to which the DM is to be sent. This address will be used if the value of the column calixSoamExtMepDmExtDestIsMepId is 'True'.
INT calixSoamExtMepDmExtDmPeriod	1.3.6.1.4.1.6321.1.99.1.4.1.6	INTEGER	read-create	Specifies the delay between two consecutive DM messages.
calixSoamExtMepDmExtEntry	1.3.6.1.4.1.6321.1.99.1.4.1		not-accessible	MEP Extension (DM and DVM) table for a given MEP object.
U32 calixSoamExtMepDmExtMaxRoundTripDelay	1.3.6.1.4.1.6321.1.99.1.4.1.17	Unsigned32	read-only	The maximum round trip delay for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtMaxRoundTripDelayVariation	1.3.6.1.4.1.6321.1.99.1.4.1.20	Unsigned32	read-only	The maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtMaxRoundTripProcessingDelay	1.3.6.1.4.1.6321.1.99.1.4.1.23	Unsigned32	read-only	The maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtMaxRtdThrClr	1.3.6.1.4.1.6321.1.99.1.4.1.8	Unsigned32	read-create	The maximum round trip delay threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepDmExtMaxRtdThrSet	1.3.6.1.4.1.6321.1.99.1.4.1.7	Unsigned32	read-create	The maximum round trip delay threshold upon which an alarm is to be raised.
U32 calixSoamExtMepDmExtMaxRtdVarThrClr	1.3.6.1.4.1.6321.1.99.1.4.1.12	Unsigned32	read-create	The maximum round trip delay variation threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepDmExtMaxRtdVarThrSet	1.3.6.1.4.1.6321.1.99.1.4.1.11	Unsigned32	read-create	The maximum round trip delay variation threshold upon which an alarm is to be raised.
U32 calixSoamExtMepDmExtMinRoundTripDelay	1.3.6.1.4.1.6321.1.99.1.4.1.16	Unsigned32	read-only	The minimum round trip delay for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtMinRoundTripDelayVariation	1.3.6.1.4.1.6321.1.99.1.4.1.19	Unsigned32	read-only	The minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
U32 calixSoamExtMepDmExtMinRoundTripProcessingDelay	1.3.6.1.4.1.6321.1.99.1.4.1.22	Unsigned32	read-only	The minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
calixSoamExtMepDmExtTable	1.3.6.1.4.1.6321.1.99.1.4		not-accessible	This table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support Delay Measurement and Delay Variation Measurment functionality.
CAL calixSoamExtMepLmExtActive	1.3.6.1.4.1.6321.1.99.1.5.1.1	CalixEoamEnableType	read-create	Use to enable frame delay measurement.
U32 calixSoamExtMepLmExtAvgFarEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.25	Unsigned32	read-only	Average frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
U32 calixSoamExtMepLmExtAvgFarEndLossThrClr	1.3.6.1.4.1.6321.1.99.1.5.1.15	Unsigned32	read-create	The average far end loss threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepLmExtAvgFarEndLossThrSet	1.3.6.1.4.1.6321.1.99.1.5.1.14	Unsigned32	read-create	The average far end loss threshold upon which an alarm is to be raised.
U32 calixSoamExtMepLmExtAvgNearEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.20	Unsigned32	read-only	Average frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
U32 calixSoamExtMepLmExtAvgNearEndLossThrClr	1.3.6.1.4.1.6321.1.99.1.5.1.11	Unsigned32	read-create	The average near end frame loss threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepLmExtAvgNearEndLossThrSet	1.3.6.1.4.1.6321.1.99.1.5.1.10	Unsigned32	read-create	The average near end frame loss threshold upon which an alarm is to be raised.
U32 calixSoamExtMepLmExtClassOfService	1.3.6.1.4.1.6321.1.99.1.5.1.6	Unsigned32	read-create	Specifies the class of service for which the FLM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
T/F calixSoamExtMepLmExtDestIsMepId	1.3.6.1.4.1.6321.1.99.1.5.1.4	TruthValue	read-create	True indicates that MEPID is used for FLM transmission. False indicates that unicast destination MAC address is used for FLM transmission.
MAC calixSoamExtMepLmExtDestMacAddress	1.3.6.1.4.1.6321.1.99.1.5.1.2	MacAddress	read-create	The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepLmExtDestIsMepId is 'False'.
DOT calixSoamExtMepLmExtDestMepId	1.3.6.1.4.1.6321.1.99.1.5.1.3	Dot1agCfmMepIdOrZero	read-create	The MEP ID of remote MEP to which the FLM is to be sent. This address will be used if the value of the column calixSoamExtMepLmExtDestIsMepId is 'True'.
calixSoamExtMepLmExtEntry	1.3.6.1.4.1.6321.1.99.1.5.1		not-accessible	MEP Extension (FLM) table for a given MEP object
U32 calixSoamExtMepLmExtFarEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.22	Unsigned32	read-only	Frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
C32 calixSoamExtMepLmExtFarEndLostPkts	1.3.6.1.4.1.6321.1.99.1.5.1.21	Counter32	read-only	Number of frames lost at the far end.
INT calixSoamExtMepLmExtLmPeriod	1.3.6.1.4.1.6321.1.99.1.5.1.7	INTEGER	read-create	Specifies the delay between two consecutive FLM messages
CAL calixSoamExtMepLmExtLmType	1.3.6.1.4.1.6321.1.99.1.5.1.5	CalixSoamLmType	read-create	Specifies the type of Frame Loss Measurement: Single or Dual.
U32 calixSoamExtMepLmExtMaxFarEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.23	Unsigned32	read-only	Maximum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
U32 calixSoamExtMepLmExtMaxFarEndLossThrClr	1.3.6.1.4.1.6321.1.99.1.5.1.13	Unsigned32	read-create	The maximum far end loss threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepLmExtMaxFarEndLossThrSet	1.3.6.1.4.1.6321.1.99.1.5.1.12	Unsigned32	read-create	The maximum far end loss threshold upon which an alarm is to be raised.
U32 calixSoamExtMepLmExtMaxNearEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.18	Unsigned32	read-only	Maximum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
U32 calixSoamExtMepLmExtMaxNearEndLossThrClr	1.3.6.1.4.1.6321.1.99.1.5.1.9	Unsigned32	read-create	The maximum near end frame loss threshold upon which an alarm is to be cleared.
U32 calixSoamExtMepLmExtMaxNearEndLossThrSet	1.3.6.1.4.1.6321.1.99.1.5.1.8	Unsigned32	read-create	The maximum near end frame loss threshold upon which an alarm is to be raised.
U32 calixSoamExtMepLmExtMinFarEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.24	Unsigned32	read-only	Minimum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
U32 calixSoamExtMepLmExtMinNearEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.19	Unsigned32	read-only	Minimum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
U32 calixSoamExtMepLmExtNearEndLossRatio	1.3.6.1.4.1.6321.1.99.1.5.1.17	Unsigned32	read-only	Frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
C32 calixSoamExtMepLmExtNearEndLostPkts	1.3.6.1.4.1.6321.1.99.1.5.1.16	Counter32	read-only	Number of frames lost at the near end.
calixSoamExtMepLmExtTable	1.3.6.1.4.1.6321.1.99.1.5		not-accessible	This table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support FLM on demand functionality.
calixSoamExtMepMcastLoopbackResultsEntry	1.3.6.1.4.1.6321.1.99.1.7.1		not-accessible	Each MEP can have only one active Multicast Loopback Request at a given time. This table presents the results of the last request indexed by the reply order.
U32 calixSoamExtMepMcastLoopbackResultsIndex	1.3.6.1.4.1.6321.1.99.1.7.1.1	Unsigned32	not-accessible	Specifies the index of the multicast loopback result.
MAC calixSoamExtMepMcastLoopbackResultsMacAddress	1.3.6.1.4.1.6321.1.99.1.7.1.2	MacAddress	read-only	MAC address for the received reply.
calixSoamExtMepMcastLoopbackResultsTable	1.3.6.1.4.1.6321.1.99.1.7		not-accessible	This table is used to read the results of a multicast loopback request for a given MEP.
calixSoamExtMepMcastLoopbackSessionEntry	1.3.6.1.4.1.6321.1.99.1.6.1		not-accessible	Each MEP can have only one active Multicast Loopback Request at a given time.
U32 calixSoamExtMepMcastLoopbackSessionReplies	1.3.6.1.4.1.6321.1.99.1.6.1.2	Unsigned32	read-only	Indicates the number of replies received for this multicast loopback session.
INT calixSoamExtMepMcastLoopbackSessionStatus	1.3.6.1.4.1.6321.1.99.1.6.1.1	INTEGER	read-create	Specifies the status of the Multicast Loopback request for the particular ITU-T Y.1731 MEP. In order to activate a new session, write 'activate' in this variable.
calixSoamExtMepMcastLoopbackSessionTable	1.3.6.1.4.1.6321.1.99.1.6		not-accessible	This table is used to initiate a multicast loopback request for a given MEP.
C32 calixSoamExtMepStatsExtCcmInvalidIfStatus	1.3.6.1.4.1.6321.1.99.1.8.1.5	Counter32	read-only	The total number of CCMs with invalid Interface Status TLV received from all remote MEPs.
C32 calixSoamExtMepStatsExtCcmInvalidPortStatus	1.3.6.1.4.1.6321.1.99.1.8.1.4	Counter32	read-only	The total number of CCMs with invalid Port Status TLV received from all remote MEPs.
C32 calixSoamExtMepStatsExtCcmInvalidSenderId	1.3.6.1.4.1.6321.1.99.1.8.1.3	Counter32	read-only	The total number of CCMs with invalid Sender ID TLV received from all remote MEPs.
C32 calixSoamExtMepStatsExtCcmRdiReceived	1.3.6.1.4.1.6321.1.99.1.8.1.6	Counter32	read-only	The total number of CCMs with RDI bit set received from all remote MEPs.
C32 calixSoamExtMepStatsExtCcmRdiSent	1.3.6.1.4.1.6321.1.99.1.8.1.1	Counter32	read-only	The total number of sent CCMs with RDI bit set.
C32 calixSoamExtMepStatsExtCcmReceived	1.3.6.1.4.1.6321.1.99.1.8.1.2	Counter32	read-only	The total number of CCMs received from all remote MEPs.
C32 calixSoamExtMepStatsExtDmmReceived	1.3.6.1.4.1.6321.1.99.1.8.1.20	Counter32	read-only	The total number of DMM messages received.
C32 calixSoamExtMepStatsExtDmmSent	1.3.6.1.4.1.6321.1.99.1.8.1.21	Counter32	read-only	The total number of DMM messages sent.
C32 calixSoamExtMepStatsExtDmrReceived	1.3.6.1.4.1.6321.1.99.1.8.1.22	Counter32	read-only	The total number of DMR messages received.
C32 calixSoamExtMepStatsExtDmrSent	1.3.6.1.4.1.6321.1.99.1.8.1.23	Counter32	read-only	The total number of DMR messages sent.
calixSoamExtMepStatsExtEntry	1.3.6.1.4.1.6321.1.99.1.8.1		not-accessible	Extended counters and attributes for MEP configuration.
C32 calixSoamExtMepStatsExtLbmInvalidSenderId	1.3.6.1.4.1.6321.1.99.1.8.1.9	Counter32	read-only	The total number of LBM messages received with a bad sender ID.
C32 calixSoamExtMepStatsExtLbmReceived	1.3.6.1.4.1.6321.1.99.1.8.1.7	Counter32	read-only	The total number of LBM messages received.
C32 calixSoamExtMepStatsExtLbmSent	1.3.6.1.4.1.6321.1.99.1.8.1.8	Counter32	read-only	The total number of LBM messages sent.
C32 calixSoamExtMepStatsExtLbrInvalidSenderId	1.3.6.1.4.1.6321.1.99.1.8.1.10	Counter32	read-only	The total number of LBR messages received with a bad sender ID.
C32 calixSoamExtMepStatsExtLmmReceived	1.3.6.1.4.1.6321.1.99.1.8.1.16	Counter32	read-only	The total number of LMM messages received.
C32 calixSoamExtMepStatsExtLmmSent	1.3.6.1.4.1.6321.1.99.1.8.1.17	Counter32	read-only	The total number of LMM messages sent.
C32 calixSoamExtMepStatsExtLmrReceived	1.3.6.1.4.1.6321.1.99.1.8.1.18	Counter32	read-only	The total number of LMR messages received.
C32 calixSoamExtMepStatsExtLmrSent	1.3.6.1.4.1.6321.1.99.1.8.1.19	Counter32	read-only	The total number of LMR messages sent.
C32 calixSoamExtMepStatsExtLtmReceived	1.3.6.1.4.1.6321.1.99.1.8.1.11	Counter32	read-only	The total number of LTM messages received.
C32 calixSoamExtMepStatsExtLtmSent	1.3.6.1.4.1.6321.1.99.1.8.1.12	Counter32	read-only	The total number of LTM messages sent.
C32 calixSoamExtMepStatsExtLtrInvalidMac	1.3.6.1.4.1.6321.1.99.1.8.1.13	Counter32	read-only	The total number of LTR messages received with a bad MAC address.
C32 calixSoamExtMepStatsExtLtrReceived	1.3.6.1.4.1.6321.1.99.1.8.1.14	Counter32	read-only	The total number of LTR messages received.
C32 calixSoamExtMepStatsExtLtrSent	1.3.6.1.4.1.6321.1.99.1.8.1.15	Counter32	read-only	The total number of LTR messages sent.
T/F calixSoamExtMepStatsExtResetStat	1.3.6.1.4.1.6321.1.99.1.8.1.24	TruthValue	read-create	True indicates MEP statistics should be cleared.
calixSoamExtMepStatsExtTable	1.3.6.1.4.1.6321.1.99.1.8		not-accessible	This table contains extensions of the dot1agCfmMepTable for MEP Statistics.
MAC calixSoamExtMepUcastLoopbackResultsDestMacAddress	1.3.6.1.4.1.6321.1.99.1.9.1.2	MacAddress	read-only	The MAC Address of destination MP.
calixSoamExtMepUcastLoopbackResultsEntry	1.3.6.1.4.1.6321.1.99.1.9.1		not-accessible	Unicast Loopback result for corresponding MEP.
U32 calixSoamExtMepUcastLoopbackResultsLbmFirstSeqNumber	1.3.6.1.4.1.6321.1.99.1.9.1.1	Unsigned32	read-only	The Loopback Transaction Identifier of the first LBM sent. This value can be obtained from dot1agCfmMepTransmitLbmSeqNumber of dot1agCfmMepTable table after Loopback transmitting.
C32 calixSoamExtMepUcastLoopbackResultsLbmOut	1.3.6.1.4.1.6321.1.99.1.9.1.4	Counter32	read-only	Loopback Messages sent.
C32 calixSoamExtMepUcastLoopbackResultsLbrIn	1.3.6.1.4.1.6321.1.99.1.9.1.5	Counter32	read-only	Loopback replies received.
INT calixSoamExtMepUcastLoopbackResultsStatus	1.3.6.1.4.1.6321.1.99.1.9.1.3	INTEGER	read-only	Specifies the state of the current Loopback request.
calixSoamExtMepUcastLoopbackResultsTable	1.3.6.1.4.1.6321.1.99.1.9		not-accessible	This table contains Unicast Loopback protocol results for corresponding MEP.
CAL calixSoamExtMipAdminState	1.3.6.1.4.1.6321.1.99.1.2.1.4	CalixEoamEnableType	read-create	Administrative state of the MIP.
calixSoamExtMipEntry	1.3.6.1.4.1.6321.1.99.1.2.1		not-accessible	Each MIP in the system shall have an entry in this table.
U32 calixSoamExtMipIdentifier	1.3.6.1.4.1.6321.1.99.1.2.1.1	Unsigned32	not-accessible	Unique numerical identifier for the MIP.
NUM calixSoamExtMipIfIndex	1.3.6.1.4.1.6321.1.99.1.2.1.3	InterfaceIndex	read-create	This attributes specifies the interface index for the port on which the MIP is attached.
MAC calixSoamExtMipMacAddress	1.3.6.1.4.1.6321.1.99.1.2.1.5	MacAddress	read-only	MAC address of the MIP.
T/F calixSoamExtMipResetStat	1.3.6.1.4.1.6321.1.99.1.2.1.6	TruthValue	read-create	True indicates MIPs statistics should be cleared.
ROW calixSoamExtMipRowStatus	1.3.6.1.4.1.6321.1.99.1.2.1.7	RowStatus	read-create	The status of the row. This attribute is used to create and delete a MIP in the system.
DOT calixSoamExtMipStatsDirection	1.3.6.1.4.1.6321.1.99.1.3.1.1	Dot1agCfmMpDirection	read-create	The direction in which the MHF faces for statistics.
C32 calixSoamExtMipStatsDiscards	1.3.6.1.4.1.6321.1.99.1.3.1.8	Counter32	read-only	The total number of discarded OAM frames.
calixSoamExtMipStatsEntry	1.3.6.1.4.1.6321.1.99.1.3.1		not-accessible	Stats for a MIP entity.
C32 calixSoamExtMipStatsLbmInEx	1.3.6.1.4.1.6321.1.99.1.3.1.2	Counter32	read-only	The number of LBMs received by this MIP.
C32 calixSoamExtMipStatsLbmInvalidSenderId	1.3.6.1.4.1.6321.1.99.1.3.1.7	Counter32	read-only	The total number of received LBM with a bad Sender ID.
C32 calixSoamExtMipStatsLbrOut	1.3.6.1.4.1.6321.1.99.1.3.1.3	Counter32	read-only	The number of LBRs sent by this MIP.
C32 calixSoamExtMipStatsLtmForwarded	1.3.6.1.4.1.6321.1.99.1.3.1.5	Counter32	read-only	The number of LTM messages forwarded by MIP.
C32 calixSoamExtMipStatsLtmIn	1.3.6.1.4.1.6321.1.99.1.3.1.4	Counter32	read-only	The number of LTMs received by this MIP.
C32 calixSoamExtMipStatsLtrOut	1.3.6.1.4.1.6321.1.99.1.3.1.6	Counter32	read-only	The number of LTR responses sent by this MIP.
T/F calixSoamExtMipStatsResetStat	1.3.6.1.4.1.6321.1.99.1.3.1.9	TruthValue	read-create	True indicates MEP statistics should be cleared.
calixSoamExtMipStatsTable	1.3.6.1.4.1.6321.1.99.1.3		not-accessible	This table contains Stats for all MIPs configured in the system.
calixSoamExtMipTable	1.3.6.1.4.1.6321.1.99.1.2		not-accessible	This table contains all MIPs configured in the system.

RFC description

Calix vendor-private MIB extending Ethernet OAM (EOAM) functionality; adds vendor-specific diagnostics and performance management.

Start monitoring Calix carrier access equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CALIX-EOAM-EXT-MIB