All MIBs › PDN-MPE-HEALTH-AND-STATUS-MIB
Category: DSL and Broadband, Environmental Monitoring
Description: Reports health and operational status for the Paradyne Multi-Port Ethernet module, including power and temperature sensors.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is PDN-MPE-HEALTH-AND-STATUS-MIB?
PDN-MPE-HEALTH-AND-STATUS-MIB is a Paradyne (PDN) proprietary module dedicated to hardware health monitoring of the Multi-Port Ethernet (MPE) module, a card or unit within Paradyne's telecom/data networking equipment. Its data is squarely hardware health and diagnostics: a device health-and-status table alongside self-test results, plus notification traps for status changes. This module exists explicitly for monitoring device hardware status, exposing self-test pass/fail outcomes and general health indicators (implicitly including things like power and temperature sensor status per the vendor description) so operators can detect a failing MPE module before it causes a service outage. It appears to be a self-contained enterprise MIB without strong dependency on other standard MIBs beyond generic SNMPv2 trap conventions. It is typically deployed in telecom or WAN access environments where Paradyne MPE modules provide Ethernet interfaces within larger multiplexer or access equipment chassis. Engineers can download the PDN-MPE-HEALTH-AND-STATUS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in PDN-MPE-HEALTH-AND-STATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Paradyne Multi-Port Ethernet (MPE) module
Monitoring Examples
An administrator polls mpeDevHealthAndStatusTable/mpeDevHealthAndStatusEntry to check the overall health state of each MPE module and reads mpeDevSelfTestResults to confirm the module passed its internal diagnostic self-test at boot or on demand. A self-test failure or a degraded health status entry, especially when paired with a trap from mpeDevHealthAndStatusMIBTraps, would indicate a failing Ethernet module requiring replacement before it disrupts customer traffic.
What Can Be Monitored
- device health/status
- self-test results
- health status change traps
Imported Objects
From ENTITY-MIB
| entPhysicalIndex | OBJECT-TYPE |
From PDN-HEADER-MIB
| mpe-devHealth |
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From SNMPv2-TC
| DisplayString |
OIDs
RFC description
Paradyne vendor-private MIB for enterprise health and status monitoring on MPE (multi-port edge) devices.
Start monitoring Paradyne Multi-Port Ethernet (MPE) module (hardware health/self-test) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.