EFFICIENT-MIB

All MIBs › EFFICIENT-MIB

Category: DSL and Broadband, Domain: DSL/xPON

Description: Efficient Networks MIB for managing Efficient Networks DSL modems and access equipment including line status and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EFFICIENT-MIB?

EFFICIENT-MIB is an Efficient Networks (DSL/broadband CPE vendor, later part of Siemens/GlobespanVirata) proprietary MIB (enterprise OID 763) for the IAD8600 integrated access device. Its objects cover a read-only community string, up to four trap-destination addresses, PPP authentication username/password, a clear-counters action, modem part number/config-part-number/build number, three-part firmware version, a reboot action, bridge-mode flag, NVRAM version, MAC address, LAN IP address/mask, ADSL trained path/mode, and an ATM VCL table (VPI). As a configuration/status MIB it lets an administrator confirm firmware version and ADSL trained-mode on an IAD8600 unit. It is deployed on the Efficient Networks IAD8600 integrated access device. Engineers can download the EFFICIENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EFFICIENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Efficient Networks IAD8600 integrated access device

Monitoring Examples

An administrator checks adslTrainedMode and adslTrainedPath to confirm an IAD8600's DSL line synchronized in the expected mode after installation.

What Can Be Monitored

ADSL trained mode/path
firmware version

Imported Objects

From BRIDGE-MIB

MacAddress

From RFC1155-SMI

IpAddress
OBJECT-TYPE
enterprises

From SNMPv2-SMI

Gauge32

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using atmVcl2RxRate OID:

Select an Efficient Networks IAD8600 integrated access device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type atmVcl2RxRate into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the receive rate. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline (in bps), since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
adsl	1.3.6.1.4.1.763.3.2
STR adslTrainedMode	1.3.6.1.4.1.763.3.2.2	DisplayString	read-only	None, Multi, ANSI, DMT, G.lite
STR adslTrainedPath	1.3.6.1.4.1.763.3.2.1	DisplayString	read-only	Undefined, No channel, Fast, Interleaved, Fast or Interleaved, Fast and Interleaved
atm	1.3.6.1.4.1.763.3.3
atmVcl2_Table	1.3.6.1.4.1.763.3.3.1		not-accessible	An extension to the atmVclTable.
INT atmVcl2PCR	1.3.6.1.4.1.763.3.3.1.1.10	INTEGER	read-write	Peak Cell Rate.
INT atmVcl2Protocol	1.3.6.1.4.1.763.3.3.1.1.3	INTEGER	read-only	Indicates the VCL encapsulated protocol type.
G32 atmVcl2RxErrs	1.3.6.1.4.1.763.3.3.1.1.9	Gauge32	read-only	Receive Errors.
G32 atmVcl2RxPDUs	1.3.6.1.4.1.763.3.3.1.1.7	Gauge32	read-only	Received PDUs.
G32 atmVcl2RxRateEx	1.3.6.1.4.1.763.3.3.1.1.4	Gauge32	read-only	Receive rate.
INT atmVcl2RxSdu	1.3.6.1.4.1.763.3.3.1.1.12	INTEGER	read-only	Rx SDU Size.
INT atmVcl2SCR	1.3.6.1.4.1.763.3.3.1.1.11	INTEGER	read-only	Sustained Cell Rate.
G32 atmVcl2TxErrs	1.3.6.1.4.1.763.3.3.1.1.8	Gauge32	read-only	Transmit Errors.
G32 atmVcl2TxPDUs	1.3.6.1.4.1.763.3.3.1.1.6	Gauge32	read-only	Transmitted PDUs.
G32 atmVcl2TxRate	1.3.6.1.4.1.763.3.3.1.1.5	Gauge32	read-only	Transmit rate.
INT atmVcl2TxSdu	1.3.6.1.4.1.763.3.3.1.1.13	INTEGER	read-only	Tx SDU Size.
INT atmVcl2Vci	1.3.6.1.4.1.763.3.3.1.1.2	INTEGER	not-accessible	The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.
INT atmVcl2Vpi	1.3.6.1.4.1.763.3.3.1.1.1	INTEGER	not-accessible	The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.
atmVclEntry2	1.3.6.1.4.1.763.3.3.1.1		not-accessible	An entry in the extension VCL Table.
atu_C	1.3.6.1.4.1.763.1.5010.2.2
atu_R	1.3.6.1.4.1.763.1.5010.2.1
bridge	1.3.6.1.4.1.763.1.5010.1
efficient	1.3.6.1.4.1.763
INT filtIndex	1.3.6.1.4.1.763.3.5.3.24.1.1	INTEGER	not-accessible	Filter Number Index.
iad8600	1.3.6.1.4.1.763.1.8600
iad8600Data	1.3.6.1.4.1.763.2.2.3
iad8600DataPppAuth	1.3.6.1.4.1.763.2.2.3.1
STR iad8600DataPppAuthPassword	1.3.6.1.4.1.763.2.2.3.1.2	DisplayString	read-write	PPP Authenication password.
STR iad8600DataPppAuthUsername	1.3.6.1.4.1.763.2.2.3.1.1	DisplayString	read-write	PPP Authentication username.
iad8600Info	1.3.6.1.4.1.763.2.2.1
iad8600System	1.3.6.1.4.1.763.2.2.5
iad8600SystemCommunity	1.3.6.1.4.1.763.2.2.5.1
STR iad8600SystemGetCommunityString	1.3.6.1.4.1.763.2.2.5.1.1	DisplayString	read-write	Community string for read only view of mib objects.
iad8600SystemTrapDest	1.3.6.1.4.1.763.2.2.5.2
IP iad8600SystemTrapDestAddr1	1.3.6.1.4.1.763.2.2.5.2.1	IpAddress	read-write	IP address of the First Network Management entity that traps will be sent to.
IP iad8600SystemTrapDestAddr2	1.3.6.1.4.1.763.2.2.5.2.2	IpAddress	read-write	IP address of the Second Network Management entity that traps will be sent to.
IP iad8600SystemTrapDestAddr3	1.3.6.1.4.1.763.2.2.5.2.3	IpAddress	read-write	IP address of the Third Network Management entity that traps will be sent to.
IP iad8600SystemTrapDestAddr4	1.3.6.1.4.1.763.2.2.5.2.4	IpAddress	read-write	IP address of the Fourth Network Management entity that traps will be sent to.
iad8600Voice	1.3.6.1.4.1.763.2.2.2
iad8600Wan	1.3.6.1.4.1.763.2.2.4
mib_extensions	1.3.6.1.4.1.763.2
mibIad8600	1.3.6.1.4.1.763.2.2
mibRouter5660	1.3.6.1.4.1.763.2.1
modem	1.3.6.1.4.1.763.3.1
modem5010	1.3.6.1.4.1.763.1.5010
modem5621	1.3.6.1.4.1.763.1.5621
STR modemBuildNumber	1.3.6.1.4.1.763.3.1.4	DisplayString	read-only	Build number
INT modemClearCounters	1.3.6.1.4.1.763.3.1.1	INTEGER	read-write	Clear counters.
STR modemConfigPartNumber	1.3.6.1.4.1.763.3.1.3	DisplayString	read-only	Configuration part number
STR modemFirmwareVersion1	1.3.6.1.4.1.763.3.1.5	DisplayString	read-only	First Firmware version entry
STR modemFirmwareVersion2	1.3.6.1.4.1.763.3.1.6	DisplayString	read-only	Second Firmware version entry
STR modemFirmwareVersion3	1.3.6.1.4.1.763.3.1.7	DisplayString	read-only	Third Firmware version entry
INT modemIsBridge	1.3.6.1.4.1.763.3.1.9	INTEGER	read-only	Is modem a bridge 1 - bridge 2 - rtr 3 - brtr.
IP modemLANIpAddress	1.3.6.1.4.1.763.3.1.12	IpAddress	read-write	LAN IP address.
IP modemLANMask	1.3.6.1.4.1.763.3.1.13	IpAddress	read-write	LAN Subnet mask.
MAC modemMacAddress	1.3.6.1.4.1.763.3.1.11	MacAddress	read-only	LAN MAC address.
OCT modemNVRAMVersion	1.3.6.1.4.1.763.3.1.10	OCTET STRING	read-only	NVRAM version.
STR modemPartNumber	1.3.6.1.4.1.763.3.1.2	DisplayString	read-only	Part number
INT modemReboot	1.3.6.1.4.1.763.3.1.8	INTEGER	write-only	Reboot the modem. 0 - save the nvram 1 - reboot the modem
nvatm	1.3.6.1.4.1.763.3.5.2
INT nvatmVccAalType	1.3.6.1.4.1.763.3.5.2.1.1.4	INTEGER	read-write	An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL is in use. The type of AAL used on this VCC.
INT nvatmVccEncType	1.3.6.1.4.1.763.3.5.2.1.1.5	INTEGER	read-write	Encapsulation type.
nvatmVccEntry	1.3.6.1.4.1.763.3.5.2.1.1		not-accessible	NVRAM configuration for ATM.
nvatmVccPoeEntry	1.3.6.1.4.1.763.3.5.2.2.1		not-accessible	NVRAM configuration for ATM.
nvatmVccPoeTable	1.3.6.1.4.1.763.3.5.2.2		not-accessible	A list of PPPoe related configs.
nvatmVccTable	1.3.6.1.4.1.763.3.5.2.1		not-accessible	A list of PPP related parameters.
INT nvatmVccVci	1.3.6.1.4.1.763.3.5.2.1.1.3	INTEGER	read-write	The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.
INT nvatmVccVpi	1.3.6.1.4.1.763.3.5.2.1.1.2	INTEGER	read-write	The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.
nvram	1.3.6.1.4.1.763.3.5
nvsntp	1.3.6.1.4.1.763.3.5.4
STR nvSntpBackupServer	1.3.6.1.4.1.763.3.5.4.2	DisplayString	read-write	SNTP backup server
STR nvSntpPrimaryServer	1.3.6.1.4.1.763.3.5.4.1	DisplayString	read-write	SNTP primary server
INT nvSntpTimezone	1.3.6.1.4.1.763.3.5.4.3	INTEGER	read-write	Timezone plus or minus hours from UTC
nvsys	1.3.6.1.4.1.763.3.5.1
nvwlan	1.3.6.1.4.1.763.3.5.3
INT nvwlanChannel	1.3.6.1.4.1.763.3.5.3.2	INTEGER	read-write	Channel number
INT nvwlanDisabled	1.3.6.1.4.1.763.3.5.3.21	INTEGER	read-write	Disable the wlan interface
INT nvwlanDisableSsidBroadcast	1.3.6.1.4.1.763.3.5.3.20	INTEGER	read-write	Disable the SSID broadcast
INT nvwlanEnableFilters	1.3.6.1.4.1.763.3.5.3.18	INTEGER	read-write	Enable filtering
nvwlanFiltEntry	1.3.6.1.4.1.763.3.5.3.24.1		not-accessible	NVRAM configuration for ATM.
INT nvwlanFilterIsDeny	1.3.6.1.4.1.763.3.5.3.19	INTEGER	read-write	Filter type
MAC nvwlanFiltMac	1.3.6.1.4.1.763.3.5.3.24.1.3	MacAddress	read-write	Filter MAC address
nvwlanFiltTable	1.3.6.1.4.1.763.3.5.3.24		not-accessible	A list of PPP related parameters.
STR nvwlanFiltUsername	1.3.6.1.4.1.763.3.5.3.24.1.2	DisplayString	read-write	Filter Usernames.
INT nvwlanFragmentation	1.3.6.1.4.1.763.3.5.3.16	INTEGER	read-write	Fragmentation threshold
INT nvwlanInitialSetup	1.3.6.1.4.1.763.3.5.3.23	INTEGER	read-write	Initial Setup - I have no idea what this is
OCT nvwlanK128	1.3.6.1.4.1.763.3.5.3.10	OCTET STRING	read-write	128 bit encryption key
OCT nvwlanK64_1	1.3.6.1.4.1.763.3.5.3.6	OCTET STRING	read-write	64 bit encryption key 1
OCT nvwlanK64_2	1.3.6.1.4.1.763.3.5.3.7	OCTET STRING	read-write	64 bit encryption key 2
OCT nvwlanK64_3	1.3.6.1.4.1.763.3.5.3.8	OCTET STRING	read-write	64 bit encryption key 3
OCT nvwlanK64_4	1.3.6.1.4.1.763.3.5.3.9	OCTET STRING	read-write	64 bit encryption key 4
INT nvwlanKey	1.3.6.1.4.1.763.3.5.3.5	INTEGER	read-write	Encryption Key to use
INT nvwlanLocale	1.3.6.1.4.1.763.3.5.3.17	INTEGER	read-write	Locale descriptor
MAC nvwlanMacAddress	1.3.6.1.4.1.763.3.5.3.1	MacAddress	read-write	Mac address for the Wireless LAN card
INT nvwlanRate	1.3.6.1.4.1.763.3.5.3.14	INTEGER	read-write	Data Rate
INT nvwlanRts	1.3.6.1.4.1.763.3.5.3.15	INTEGER	read-write	rts-cts-threshold
INT nvwlanSecurity	1.3.6.1.4.1.763.3.5.3.4	INTEGER	read-write	Type of security employed 0 - off 1 - w64 2 - w128 3 - wpa.
INT nvwlanSharedKeyAuth	1.3.6.1.4.1.763.3.5.3.22	INTEGER	read-write	Shared Key Authorization
OCT nvwlanSsid	1.3.6.1.4.1.763.3.5.3.3	OCTET STRING	read-write	SSID
INT nvwlanWpaAlgorithm	1.3.6.1.4.1.763.3.5.3.11	INTEGER	read-write	WPA algorithm 0 - tkip 1 - aes.
OCT nvwlanWpaKey	1.3.6.1.4.1.763.3.5.3.12	OCTET STRING	read-write	wpa key
INT nvwlanWpaRenewal	1.3.6.1.4.1.763.3.5.3.13	INTEGER	read-write	WPA key renewal time
INT poeIndex	1.3.6.1.4.1.763.3.5.2.2.1.2	INTEGER	not-accessible
ppp	1.3.6.1.4.1.763.3.4
STR pppAUTHOldState	1.3.6.1.4.1.763.3.4.3.1.6	DisplayString	read-only	prior state of AUTH.
STR pppAUTHState	1.3.6.1.4.1.763.3.4.3.1.3	DisplayString	read-only	Current state of AUTH.
INT pppConnect	1.3.6.1.4.1.763.3.4.1	INTEGER	write-only	WAN connect.
INT pppDisconnect	1.3.6.1.4.1.763.3.4.2	INTEGER	write-only	WAN disconnect.
pppEntry	1.3.6.1.4.1.763.3.4.3.1		not-accessible	An interface entry containing PPP states.
STR pppIPCPOldState	1.3.6.1.4.1.763.3.4.3.1.5	DisplayString	read-only	Prior state of IPCP.
STR pppIPCPState	1.3.6.1.4.1.763.3.4.3.1.2	DisplayString	read-only	Current state of IPCP.
STR pppLCPOldState	1.3.6.1.4.1.763.3.4.3.1.4	DisplayString	read-only	Prior state of LCP.
STR pppLCPState	1.3.6.1.4.1.763.3.4.3.1.1	DisplayString	read-only	Current state of LCP.
pppoe	1.3.6.1.4.1.763.3.4.4
STR pppoeAccessConcentratorName	1.3.6.1.4.1.763.3.4.4.1.1.1	DisplayString	read-only	Name of the attached access concentrator.
pppoeEntry	1.3.6.1.4.1.763.3.4.4.1.1		not-accessible	An interface entry containing negotiated PPPoE parameters.
STR pppoeServiceName	1.3.6.1.4.1.763.3.4.4.1.1.2	DisplayString	read-only	Name of the connected service.
pppoeTable	1.3.6.1.4.1.763.3.4.4.1		not-accessible	A list of PPPoE related parameters.
pppTable	1.3.6.1.4.1.763.3.4.3		not-accessible	A list of PPP related parameters.
STR pppUsrPassword	1.3.6.1.4.1.763.3.5.2.2.1.4	DisplayString	read-write	Password for the pppoe session.
STR pppUsrUsername	1.3.6.1.4.1.763.3.5.2.2.1.3	DisplayString	read-write	Username for the pppoe session.
product	1.3.6.1.4.1.763.1
router	1.3.6.1.4.1.763.1.5010.2
INT vccIndex	1.3.6.1.4.1.763.3.5.2.1.1.1	INTEGER	not-accessible
INT vccIndex2	1.3.6.1.4.1.763.3.5.2.2.1.1	INTEGER	not-accessible
xMIB	1.3.6.1.4.1.763.3

RFC description

EfficientIP SOLIDserver monitoring MIB for exposing SOLIDserver monitoring data and infrastructure metrics to SNMP management applications.

Start monitoring Efficient Networks IAD8600 integrated access device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EFFICIENT-MIB