OMNI-gx2litePS-MIB

All MIBs › OMNI-gx2litePS-MIB

Category: Cable/DOCSIS

Description: Manages the Cisco/Scientific-Atlanta GX2 Lite power supply module in HFC optical node deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2litePS-MIB?

OMNI-gx2litePS-MIB is a proprietary Scientific-Atlanta/Cisco MIB for the power supply module of the GX2 Lite optical node, a device used at the hybrid fiber-coax (HFC) boundary in cable broadband networks. It focuses narrowly on the electrical/environmental health of that power supply module rather than broad networking data. As such it is squarely a hardware-status MIB: the kind of parameters it exposes are power supply operational/alarm state, output voltage, and temperature readings for the node's power plant. No module description or object list was available in the source to confirm exact object names, so specifics beyond this general profile cannot be verified. It fits into the OMNI enterprise MIB family Scientific-Atlanta used across its optical node product line, deployed at outside-plant HFC nodes in cable operator access networks. Engineers can download the OMNI-gx2litePS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2litePS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (GX2 Lite optical node power supply module)

Monitoring Examples

No sample objects were provided for this module, so a concrete polling scenario referencing real object names cannot be constructed; based on the short description, monitoring would center on the GX2 Lite power supply's status and alarm indicators rather than any traffic or performance counters.

What Can Be Monitored

power supply operational status
power supply alarm/fault state
output voltage
temperature

Imported Objects

From GX2HFC-MIB

gx2Liteps

OBJECT-IDENTITY

From NLS-BBNIDENT-MIB

gi	OBJECT-IDENTITY
motproxies	OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks

From RFC1213-MIB

DisplayString
sysUpTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF trapLitepsConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.23.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapLitepsConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.23.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapLitepsFanCurrent1	1.3.6.1.4.1.1166.6.1.2.23.0.3			This trap is issued when Fan 1 is in an alarm condition.
NTF trapLitepsFanCurrent2	1.3.6.1.4.1.1166.6.1.2.23.0.4			This trap is issued when Fan 2 is in an alarm condition.
NTF trapLiteps12Volt	1.3.6.1.4.1.1166.6.1.2.23.0.5			This trap is issued when the 12 Volts is in an alarm condition.
NTF trapLiteps5Volt	1.3.6.1.4.1.1166.6.1.2.23.0.6			This trap is issued when the 5.1 Volts is in an alarm condition.
NTF trapLiteps3Volt	1.3.6.1.4.1.1166.6.1.2.23.0.7			This trap is issued when the 3.7 Volts is in an alarm condition.
gx2LitepsDescriptor	1.3.6.1.4.1.1166.6.1.2.23.1
gx2LitepsAnalogTable	1.3.6.1.4.1.1166.6.1.2.23.2		not-accessible	This table contains gx2Liteps specific parameters with nominal and current values.
gx2LitepsAnalogEntry	1.3.6.1.4.1.1166.6.1.2.23.2.1		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
INT gx2LitepsAnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.23.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR litepslabel12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.2	DisplayString	read-only	The value of this object provides the label of the 12 Volt Analog parameter.
STR litepsuom12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.3	DisplayString	read-only	The value of this object provides the unit of measure of the 12 Volt Analog parameter.
FLO litepsmajorHigh12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.4	Float	read-only	The value of this object provides the Major High alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsmajorLow12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.5	Float	read-only	The value of this object provides the Major Low alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsminorHigh12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.6	Float	read-only	The value of this object provides the Minor High alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsminorLow12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.7	Float	read-only	The value of this object provides the Minor Low alarm value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepscurrentValue12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.8	Float	read-only	The value of this object provides the Current value of the 12 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
INT litepsstateFlag12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.9	INTEGER	read-only	The value of this object provides the state of the 12 Volt Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable)
FLO litepsminValue12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.10	Float	read-only	The value of this object provides the minimum value the 12 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsmaxValue12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.11	Float	read-only	The value of this object provides the maximum value the 12 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
INT litepsalarmState12Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the 12 Volt Analog parameter.
STR litepslabel5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.13	DisplayString	read-only	The value of this object provides the label of the Attenuator Setting Analog parameter.
STR litepsuom5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the 5 Volt Analog parameter.
FLO litepsmajorHigh5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.15	Float	read-only	The value of this object provides the Major High alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsmajorLow5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.16	Float	read-only	The value of this object provides the Major Low alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsminorHigh5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.17	Float	read-only	The value of this object provides the Minor High alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsminorLow5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.18	Float	read-only	The value of this object provides the Minor Low alarm value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepscurrentValue5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.19	Float	read-only	The value of this object provides the Current value of the 5 Volt Analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
INT litepsstateFlag5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.20	INTEGER	read-only	The value of this object provides the state of the 5 Volt Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO litepsminValue5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.21	Float	read-only	The value of this object provides the minimum value the 5 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsmaxValue5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.22	Float	read-only	The value of this object provides the maximum value the 5 Volt Analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
INT litepsalarmState5Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the 5 Volt Analog parameter.
STR litepslabel3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.24	DisplayString	read-only	The value of this object provides the label of the 3 Anode Volt Analog parameter.
STR litepsuom3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.25	DisplayString	read-only	The value of this object provides the Unit of Measure of the 3.7V anode voltage analog parameter.
FLO litepsmajorHigh3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.26	Float	read-only	The value of this object provides the Major High alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsmajorLow3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.27	Float	read-only	The value of this object provides the Major Low alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsminorHigh3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.28	Float	read-only	The value of this object provides the Minor High alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsminorLow3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.29	Float	read-only	The value of this object provides the Minor Low alarm value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepscurrentValue3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.30	Float	read-only	The value of this object provides the Current value of the 3.7V anode voltage analog parameter. This value is a floating point number that is represented as an IEEE 32 Bit number.
INT litepsstateFlag3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.31	INTEGER	read-only	The value of this object provides the state of the 3 Volt Analog parameter. (0-Hidden 1-Read-Only, 2-Updateable).
FLO litepsminValue3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.32	Float	read-only	The value of this object provides the minimum value that the 3.7V anode voltage analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
FLO litepsmaxValue3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.33	Float	read-only	The value of this object provides the maximum value that the 3.7V anode voltage analog parameter can achieve. This value is a floating point number that is represented as an IEEE 32 Bit number.
INT litepsalarmState3Volt	1.3.6.1.4.1.1166.6.1.2.23.2.1.34	INTEGER	read-only	The value of this object provides the curent alarm state of the 3.7V anode voltage analog parameter.
gx2LitepsStatusTable	1.3.6.1.4.1.1166.6.1.2.23.3		not-accessible	This table contains gx2Liteps specific parameters with nominal and current values.
gx2LitepsStatusEntry	1.3.6.1.4.1.1166.6.1.2.23.3.2		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
INT gx2LitepsStatusTableIndex	1.3.6.1.4.1.1166.6.1.2.23.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
STR litepslabelFan1Status	1.3.6.1.4.1.1166.6.1.2.23.3.2.2	DisplayString	read-only	The value of this object provides the label of the Fan 1 Status parameter.
INT litepsvalueFan1Status	1.3.6.1.4.1.1166.6.1.2.23.3.2.3	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT litepsstateflagFan1Status	1.3.6.1.4.1.1166.6.1.2.23.3.2.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).
STR litepslabelFan2Status	1.3.6.1.4.1.1166.6.1.2.23.3.2.5	DisplayString	read-only	The value of this object provides the label of the Fan 2 Status parameter.
INT litepsvalueFan2Status	1.3.6.1.4.1.1166.6.1.2.23.3.2.6	INTEGER	read-only	The value of this object provides the current state of the parameter (0-Ok, 1-Undetermined 2-Warning, 3-Minor, 4-Major, 5-Critical).
INT litepsstateflagFan2Status	1.3.6.1.4.1.1166.6.1.2.23.3.2.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (0-Hidden 1-Read-Only, 2-Updateable).

RFC description

OMNI GX2 Lite Power Supply device management for HFC network elements.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 Lite optical node power supply module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2litePS-MIB

What Is OMNI-gx2litePS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description