| OID symbolic | OID numeric | Type | Access | Description |
|---|
| pbcKodiakMG10Mib | 1.3.6.1.4.1.5987.1.1.3 | | | MIB Module for the Kodiak M-G10 CMTS. |
| pbcKodiakMG10Cmts | 1.3.6.1.4.1.5987.3.1 | | | |
| pbcG10SystemEnvMon | 1.3.6.1.4.1.5987.3.1.1 | | | |
| sytemEnvMonObjects | 1.3.6.1.4.1.5987.3.1.1.1 | | | |
| systemEnvMonPowerSupply | 1.3.6.1.4.1.5987.3.1.1.1.1 | | | |
| I32 systemEnvMonPowerSupplyEntityIndex | 1.3.6.1.4.1.5987.3.1.1.1.1.1 | Integer32 | read-write | entPhysicalIndex of this card's entry in the Entity MIB's
(RFC2737) entPhysicalTable or '0', if none. |
| INT systemEnvMonPowerSupplyStatus | 1.3.6.1.4.1.5987.3.1.1.1.1.2 | INTEGER | read-write | Description. |
| systemEnvMonTemperature | 1.3.6.1.4.1.5987.3.1.1.1.3 | | | |
| I32 systemEnvMonAmbientTemperatureHighThreshold | 1.3.6.1.4.1.5987.3.1.1.1.3.1 | Integer32 | read-write | If the ambient temperature exceeds this value, a warning notification
will be generated. The user may use this feature to be alerted to
problems with the HVAC at the installed location. |
| I32 systemEnvMonAmbientTemperatureLowThreshold | 1.3.6.1.4.1.5987.3.1.1.1.3.2 | Integer32 | read-write | If the ambient temperature falls below this value, a warning
notification will be generated. The user may use this feature
to be alerted to problems with the HVAC at the installed location. |
| U32 systemEnvMonAmbientTermperatureNumEntries | 1.3.6.1.4.1.5987.3.1.1.1.3.3 | Unsigned32 | read-only | Number of entries in the temperature
monitoring status table. |
| systemEnvMonAmbientTemperatureTable | 1.3.6.1.4.1.5987.3.1.1.1.3.4 | | not-accessible | Table of temperature status maintained
by the system/chassis environment monitor. |
| systemEnvMonAmbientTemperatureEntry | 1.3.6.1.4.1.5987.3.1.1.1.3.4.1 | | not-accessible | An entry in the temperature status table representing the status
of ambient temperature monitoring on one module (card). The index
is the same as that used in the pbcCardTable. |
| I32 systemEnvMonAmbientTemperature | 1.3.6.1.4.1.5987.3.1.1.1.3.4.1.1 | Integer32 | read-only | Current temperature at the monitoring point for this module (card). |
| U32 systemEnvMonFanTrayStatusNumEntries | 1.3.6.1.4.1.5987.3.1.1.1.5 | Unsigned32 | read-only | Number of entries in the fan status
monitoring table. |
| systemEnvMonFanTrayStatusTable | 1.3.6.1.4.1.5987.3.1.1.1.6 | | not-accessible | Table of fan status maintained by the system
environment monitor. |
| systemEnvMonFanTrayStatusEntry | 1.3.6.1.4.1.5987.3.1.1.1.6.1 | | not-accessible | An entry in the temperature status table
representing the status of one monitoring
point. |
| U32 systemEnvMonFanTrayStatusIndex | 1.3.6.1.4.1.5987.3.1.1.1.6.1.1 | Unsigned32 | read-only | Chassis-assigned ndex number of this fan tray. |
| U32 systemEnvMonFanTrayStatusEntityIndex | 1.3.6.1.4.1.5987.3.1.1.1.6.1.2 | Unsigned32 | read-only | entPhysicalIndex of this fan tray's entry in the Entity MIB's
(RFC2737) entPhysicalTable or '0', if none. |
| I32 systemEnvMonFanStatusNumEntries | 1.3.6.1.4.1.5987.3.1.1.1.7 | Integer32 | read-only | Number of fan entries in the fan status table. |
| systemEnvMonFanStatusTable | 1.3.6.1.4.1.5987.3.1.1.1.8 | | not-accessible | Table with individual fan speeds for the fans in each tray. |
| systemEnvMonFanStatusEntry | 1.3.6.1.4.1.5987.3.1.1.1.8.1 | | not-accessible | Fan speed and thresholds for one fan. |
| U32 systemEnvMonFanStatusIndex | 1.3.6.1.4.1.5987.3.1.1.1.8.1.1 | Unsigned32 | read-only | Description. |
| I32 systemEnvMonFanStatusSpeed | 1.3.6.1.4.1.5987.3.1.1.1.8.1.2 | Integer32 | read-only | Current speed of the fan. |
| pbcG10SystemConformance | 1.3.6.1.4.1.5987.3.1.2 | | | |
| pbcG10SystemGroups | 1.3.6.1.4.1.5987.3.1.2.1 | | | |
| pbcSystemEnvMonGroup | 1.3.6.1.4.1.5987.3.1.2.1.1 | | | Objects associated with system environment monitoring. |
| pbcG10RedundancyGroup | 1.3.6.1.4.1.5987.3.1.2.1.2 | | | Objects associated with DM, NIC and CCM Module Redundancy. |
| pbcG10SystemCompliance | 1.3.6.1.4.1.5987.3.1.2.3 | | | |
| pbcG10SystemBasicCompliance | 1.3.6.1.4.1.5987.3.1.2.3.1 | | | Group support required for basic G10 level compliance. |
| pbcG10RedundancyCompliance | 1.3.6.1.4.1.5987.3.1.2.3.2 | | | Group support required for G10 Redundancy compliance. |
| pbcG10DMRedundancy | 1.3.6.1.4.1.5987.3.1.3 | | | |
| pbcG10CmtsDMRGroupTable | 1.3.6.1.4.1.5987.3.1.3.1 | | not-accessible | Table Containing the status of various DOCSIS Module Redunduncy Groups.
If ths are no DM Reundandancy Groups present on the G10 CMTS, this table
is empty. |
| pbcG10CmtsDMRGroupEntry | 1.3.6.1.4.1.5987.3.1.3.1.1 | | not-accessible | An entry describing the status of various DOCSIS Module Redundancy
Groups. |
| U32 pbcG10CmtsDMRGroupIndex | 1.3.6.1.4.1.5987.3.1.3.1.1.1 | Unsigned32 | accessible-for-notify | An Unique identifier that identifies a DOCSIS Module Redundancy Group.
Its value is the same as the slot number that contains the Standby
DOCSIS Module within the Redundancy Group. All entries with the same
value of pbcG10CmtsDMRGroupIndex belong to the same DM Redundancy Group. |
| U32 pbcG10CmtsDMRGroupSlotNbr | 1.3.6.1.4.1.5987.3.1.3.1.1.2 | Unsigned32 | accessible-for-notify | The slot number of the corresponding DOCSIS Module. |
| U32 pbcG10CmtsDMRGroupDmCardIndex | 1.3.6.1.4.1.5987.3.1.3.1.1.3 | Unsigned32 | read-only | The index in the pbcCardTable for the corresponding DOCSIS Module.
If the DOCSIS Module is not present in the system, this value is
reported as 0. |
| U32 pbcG10CmtsDMRGroupImCardIndex | 1.3.6.1.4.1.5987.3.1.3.1.1.4 | Unsigned32 | read-only | The index in the pbcCardTable for the corresponding Real I/O Module.
The corresponding Rear I/O Module MUST always be present in the
system, or else this entry will not even exist in this table. |
| INT pbcG10CmtsDMRGroupRole | 1.3.6.1.4.1.5987.3.1.3.1.1.5 | INTEGER | read-only | The role of this DOCSIS Module in the Redundancy Group.
The active (1) role corresponds to a DOCSIS Module where the
external R/F connections terminate and is normally serving
the subscribers. The standby (2) role corresponds to a DOCSIS
Module that is in a standby mode, and to which the R/F from an
active module can be directed in the event of a failure of an
active module within the redundancy group. The excluded (3)
role implies that the corresponding DOCSIS Module has been instructed
by the operator to be excluded from being a member of the
Redundancy Group. |
| INT pbcG10CmtsDMRGroupStatus | 1.3.6.1.4.1.5987.3.1.3.1.1.6 | INTEGER | read-only | Defines the operational status of the corresponding DOCSIS Module card.
The notPresent (1) status implies that the DOCSIS Module has been
removed from the system, or was never present in the system.
The offline (2) status implies that an operator has shutdown the
card either through the CLI, or through the pbcCardTable.
The online (3) status means that an active DOCSIS Module is
functioning normally; or for a standby card it implies that the DOCSIS
Module is functioning normally and is ready to cover an active module
in the event of a failure.
The failed (4) status implies that a failure had been detected
previously.
The covering (5) status applies only to a standby module and implies
that it is covering for a failed module |
| U32 pbcG10CmtsDMRGroupAlias | 1.3.6.1.4.1.5987.3.1.3.1.1.7 | Unsigned32 | read-only | For a module in the standby role, this object has a value of 0 if it
is not covering any active modules, else it identifies the slot
number of the DOCSIS Module that it is covering. For a module in an
active role, this object has a value of 0 if it has not failed, or is
not being covered by a standby in case of failure, else it identifies
the slot number of the standby DOCSIS Module that is covering this
module |
| INT pbcG10CmtsDMRGroupAction | 1.3.6.1.4.1.5987.3.1.3.1.1.8 | INTEGER | read-only | This object allows the operator to take certain actions on the
corresponding DOCSIS Module.
Action none (1) has no effect on the DOCSIS Module.
The exclude (2) action excludes the module as a member of the
Redundancy Group. When an active module has been excluded from a
Redundancy Group, it can no longer be covered by a standby in
the event of a failure. Action exclude (2) cannot be applied on a
standby module.
The include (3) action nullifies the effect of a previous exclude (2)
action. If no exclude (2) action had been taken before for this
DOCSIS Module, the include (3) action has no effect.
The switchIn (4) action schedules an active module to switch to
standby module, or a standby module to switch back to the active
module it is covering within the time-period specified by
pbcG10CmtsDMRGroupSwitchIn object. For more details, refer to the
description of that object.
The switchAt (5) action schedules an active module to switch to
standby module, or a standby module to switch back to the active
module it is covering at a date and time specified by
pbcG10CmtsDMRGroupSwitchAt object. For more details, refer to
the description of that object.
When read back, this object always returns the value none(1) |
| U32 pbcG10CmtsDMRGroupSwitchIn | 1.3.6.1.4.1.5987.3.1.3.1.1.9 | Unsigned32 | read-write | When read, this object specifies the time in seconds relative to the
current time when a switchover is scheduled for this module, or 0 if
no switchover has been scheduled. For an active module, the switchover
implies a forced fail-over to the standby module, and for a standby
module the switchover implies handing control back to the active module
it is covering, if any.
When written to in conjunction with a value of switchIn (4) for the
object pbcG10CmtsDMRGroupAction, it specifies a time in seconds in
which a switchover MUST take place. A value of 0 implies that switchover
be started immediately. |
| DAT pbcG10CmtsDMRGroupSwitchAt | 1.3.6.1.4.1.5987.3.1.3.1.1.10 | DateAndTime | read-write | When read, this object specifies the time when a switchover is scheduled
for this module, or an NULL (Hex String 00 00 00 00 00 00 00 00) value
if no switchover has been scheduled. For an active module, the
switchover implies a forced fail-over to the standby module, and for a
standby module the switchover implies handing control back to the active
module it is covering, if any.
When written to in conjunction with a value of switchAt (4) for the
object pbcG10CmtsDMRGroupAction, it specifies a date and time on which
a switchover MUST take place. A value of NULL
(Hex String 00 00 00 00 00 00 00 00) implies that switchover be started
immediately |
| INT pbcG10CmtsDMRGroupFreeze | 1.3.6.1.4.1.5987.3.1.3.2 | INTEGER | read-write | Writing freeze (1) would disallow all the Redundancy configuration
changes. To be able to make configuration changes, this value has
to be nofreeze (2). |
| pbcG10CmtsCCMRedundancy | 1.3.6.1.4.1.5987.3.1.4 | | | |
| pbcG10CmtsCCMRedundancyObject | 1.3.6.1.4.1.5987.3.1.4.1 | | | |
| U32 pbcG10CmtsCCMPrimarySlot | 1.3.6.1.4.1.5987.3.1.4.1.1 | Unsigned32 | read-only | Identifies the slot number of the CCM Module that is currently in the
primary role. |
| INT pbcG10CmtsCCMAction | 1.3.6.1.4.1.5987.3.1.4.1.2 | INTEGER | read-write | This object allows the operator to take certain actions on the CCM
Module.
Action none (1) has no effect on the CCM Module.
The switchIn (2) action schedules the primary CCM to switch to standby
or standby CCM to primary within the time-period specified by
pbcG10CmtsCcmSwitchIn object. For more details, refer to the description
of that object.
The switchAt (3) action schedules the primary CCM to switch to standby
or standby CCM to primary at a date and time specified by
pbcG10CmtsCcmSwitchAt object. For more details, refer to the description
of that object.
When read back, this object always returns the value none (1). |
| U32 pbcG10CmtsCCMSwitchIn | 1.3.6.1.4.1.5987.3.1.4.1.3 | Unsigned32 | read-write | When read, this object specifies the time in seconds relative to the
current time when a switchover is scheduled for the currently active
CCM module, or 0 if no switchover has been scheduled.
When written to in conjunction with a value of switchIn (2) for the
object pbcG10CmtsCCMAction, it specifies a time in seconds in which
a switchover MUST take place. A value of 0 implies that switchover be
started immediately. |
| DAT pbcG10CmtsCCMSwitchAt | 1.3.6.1.4.1.5987.3.1.4.1.4 | DateAndTime | read-write | When read, this object specifies the time when a switchover is scheduled
for the currently active CCM module, or an NULL
(Hex String 00 00 00 00 00 00 00 00) value if no switchover has been
scheduled.
When written to in conjunction with a value of switchAt (3) for the
object pbcG10CmtsCcmAction, it specifies a date and time at which a
switchover MUST take place. A value of NULL
(Hex String 00 00 00 00 00 00 00 00) implies that switchover be started
immediately. |
| pbcG10CmtsNICRedundancy | 1.3.6.1.4.1.5987.3.1.5 | | | |
| pbcG10CmtsNICRedundancyObject | 1.3.6.1.4.1.5987.3.1.5.1 | | | |
| INT pbcG10CmtsNICRedundancyEnable | 1.3.6.1.4.1.5987.3.1.5.1.1 | INTEGER | read-write | Enable/Disable NIC Redundancy for the whole system. |
| pbcG10CmtsNicDmConnectivityTable | 1.3.6.1.4.1.5987.3.1.5.1.2 | | not-accessible | Table containing information about connectivity between DOCSIS and NIC
modules. For every DOCSIS Module in the system there is two entries in
this table (One for oddCableInterface and the other for
evenCableInterface). |
| pbcG10CmtsNicDmConnectivityEntry | 1.3.6.1.4.1.5987.3.1.5.1.2.1 | | not-accessible | An entry describing the status of connectivity between DOCSIS Modules
and NIC modules. |
| U32 pbcG10CmtsNicDmConnectivityDmIndex | 1.3.6.1.4.1.5987.3.1.5.1.2.1.1 | Unsigned32 | not-accessible | A unique identifier that identifies a DOCSIS Module. |
| INT pbcG10CmtsNicDmConnectivityCableInterfaceIndex | 1.3.6.1.4.1.5987.3.1.5.1.2.1.2 | INTEGER | not-accessible | Cable Connectivity mode index to differentiate between Odd and Even
cable interfaces in the DOCSIS Module.
1. oddCableInterfaces (1) meaning all odd numbered cable interfaces in
the DOCSIS Modules are connected to the NIC modules specified by the
pbcCmtsDmConnectTo.
2. evenCableInterfaces (2) meaning all even numbered cable interfaces in
the DOCSIS Modulesare connected to the NIC modules specified by the
pbcCmtsDmConnectTo. |
| U32 pbcG10CmtsNicDmConnectivityDmCardSlotNumber | 1.3.6.1.4.1.5987.3.1.5.1.2.1.3 | Unsigned32 | read-write | Slot Number where the DOCSIS Modules resides in the chassis. |
| INT pbcG10CmtsNicDmConnectivityConnectTo | 1.3.6.1.4.1.5987.3.1.5.1.2.1.4 | INTEGER | read-write | The DOCSIS Module connects to the NIC module in slot 5 if
pbcG10CmtsNicDmConnectivityConnectTo is nic5 (1),
or NIC module in slot 9 if pbcG10CmtsNicDmConnectivityConnectTo is
nic9 (2).
or RJ45 Port-a if pbcG10CmtsNicDmConnectivityConnectTo is rj45a (3).
or RJ45 Port-b if pbcG10CmtsNicDmConnectivityConnectTo is rj45b (4). |
