OMNI-gx2RFA1000-MIB

All MIBs › OMNI-gx2RFA1000-MIB

Category: Cable/DOCSIS

Description: Manages the Cisco/Scientific-Atlanta GX2 RFA1000 RF amplifier module in HFC optical node deployments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OMNI-gx2RFA1000-MIB?

OMNI-gx2RFA1000-MIB is a vendor MIB for the Cisco/Scientific-Atlanta GX2 RFA1000 RF amplifier module deployed in HFC optical nodes to boost the RF signal within the coax distribution network. It exposes module configuration and status objects such as gain/attenuation settings and amplifier operating state within the GX2 chassis management model. Its main monitoring value is hardware health of the amplifier itself, allowing operators to detect an amplifier module that has failed, dropped offline, or drifted out of its configured gain range, which directly affects downstream signal quality to subscribers. It belongs to the same OMNI-gx2 module family as the laser, RF switch, and attenuator MIBs, sharing a common chassis/slot management approach. It is typically deployed in HFC optical node cabinets as part of a cable operator's outside-plant equipment. Engineers can download the OMNI-gx2RFA1000-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OMNI-gx2RFA1000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

General Instrument OmniStar GX2 HFC headend/optical node (GX2 RFA1000 RF amplifier module)

Monitoring Examples

No sample object names were provided for this module; in practice an operator would poll the amplifier's per-module status and gain-level objects within the GX2 chassis tree. An amplifier module reporting a fault status or an unexpected gain deviation would reveal an RFA1000 hardware problem degrading RF signal levels downstream to subscribers. It is typically monitored alongside sibling OMNI-gx2 module MIBs covering the rest of the same optical node chassis.

What Can Be Monitored

amplifier module operational status
gain/attenuation level
module fault condition

Imported Objects

From GX2HFC-MIB

gx2Rfa1000

OBJECT-IDENTITY

From NLSBBN-TRAPS-MIB

trapChangedObjectId	OBJECT-TYPE
trapChangedValueDisplayString	OBJECT-TYPE
trapChangedValueInteger	OBJECT-TYPE
trapIdentifier	OBJECT-TYPE
trapNETrapLastTrapTimeStamp	OBJECT-TYPE
trapNetworkElemAdminState	OBJECT-TYPE
trapNetworkElemAlarmStatus	OBJECT-TYPE
trapNetworkElemAvailStatus	OBJECT-TYPE
trapNetworkElemModelNumber	OBJECT-TYPE
trapNetworkElemOperState	OBJECT-TYPE
trapNetworkElemSerialNum	OBJECT-TYPE
trapPerceivedSeverity	OBJECT-TYPE
trapText	OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
gx2Rfa1000AnalogEntry	1.3.6.1.4.1.1166.6.1.2.22.2.1		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
gx2Rfa1000AnalogTable	1.3.6.1.4.1.1166.6.1.2.22.2		not-accessible	This table contains gx2Rfa1000 specific parameters with nominal and current values.
gx2Rfa1000Descriptor	1.3.6.1.4.1.1166.6.1.2.22.1
gx2Rfa1000DigitalEntry	1.3.6.1.4.1.1166.6.1.2.22.3.2		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
gx2Rfa1000DigitalTable	1.3.6.1.4.1.1166.6.1.2.22.3		not-accessible	This table contains gx2Rfa1000 specific parameters with nominal and current values.
gx2Rfa1000FactoryEntry	1.3.6.1.4.1.1166.6.1.2.22.5.4		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
gx2Rfa1000FactoryTable	1.3.6.1.4.1.1166.6.1.2.22.5		not-accessible	This table contains gx2Rfa1000 specific parameters with nominal and current values.
INT gx2Rfa1000HoldTimeData	1.3.6.1.4.1.1166.6.1.2.22.6.5.3	INTEGER	read-write	The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
gx2Rfa1000HoldTimeEntry	1.3.6.1.4.1.1166.6.1.2.22.6.5		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
INT gx2Rfa1000HoldTimeSpecIndex	1.3.6.1.4.1.1166.6.1.2.22.6.5.2	INTEGER	read-only	The value of this object identifies the index of the alarm object to be modified.
gx2Rfa1000HoldTimeTable	1.3.6.1.4.1.1166.6.1.2.22.6		not-accessible	This table contains gx2Rfa1000 specific parameters with nominal and current values.
INT gx2Rfa1000HoldTimeTableIndex	1.3.6.1.4.1.1166.6.1.2.22.6.5.1	INTEGER	read-only	The value of this object is the index of the data object.
gx2Rfa1000StatusEntry	1.3.6.1.4.1.1166.6.1.2.22.4.3		not-accessible	This list contains digital product class and the associated RF channel parameters and descriptions.
gx2Rfa1000StatusTable	1.3.6.1.4.1.1166.6.1.2.22.4		not-accessible	This table contains gx2Rfa1000 specific parameters with nominal and current values.
INT rfaalarmState12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.34	INTEGER	read-only	The value of this object provides the curent alarm state of the 12v Current Analog parameter.
INT rfaalarmStateFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.23	INTEGER	read-only	The value of this object provides the curent alarm state of the Fan Current Analog parameter.
INT rfaalarmStateModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.12	INTEGER	read-only	The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
INT rfabank0CRC	1.3.6.1.4.1.1166.6.1.2.22.5.4.4	INTEGER	read-only	This object provides the CRC code of bank 0.
INT rfabank1CRC	1.3.6.1.4.1.1166.6.1.2.22.5.4.5	INTEGER	read-only	This object provides the CRC code of bank 1.
INT rfabootControlByte	1.3.6.1.4.1.1166.6.1.2.22.5.4.2	INTEGER	read-only	The value of this object indicates which bank the firmware is currently being boot from.
INT rfabootStatusByte	1.3.6.1.4.1.1166.6.1.2.22.5.4.3	INTEGER	read-only	This object indicates the status of the last boot
INT rfacalculateCRC	1.3.6.1.4.1.1166.6.1.2.22.5.4.8	INTEGER	read-only	This object indicates which of the Emnums will have the CRC calculated.
FLO rfacurrentValue12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.30	Float	read-only	The value of this object provides the Current value of the 12 Volt Current Analog parameter.
FLO rfacurrentValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.19	Float	read-only	The value of this object provides the Current value of the Fan Current Analog parameter.
FLO rfacurrentValueModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.8	Float	read-only	The value of this object provides the Current value of the Module Temperature Analog parameter.
STR rfaenumAttnSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.7	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 0.
STR rfaenumFactoryDefault	1.3.6.1.4.1.1166.6.1.2.22.3.2.11	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
STR rfaenumSlopeSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.3	DisplayString	read-only	The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 0.
INT rfafactoryCRC	1.3.6.1.4.1.1166.6.1.2.22.5.4.7	INTEGER	read-only	This object provides the CRC code for the Factory data.
INT rfaflashPrgCntA	1.3.6.1.4.1.1166.6.1.2.22.5.4.10	INTEGER	read-only	This object provides the number of times the flash has been programmed on side A.
INT rfaflashPrgCntB	1.3.6.1.4.1.1166.6.1.2.22.5.4.11	INTEGER	read-only	This object provides the number of times the flash has been programmed on side B.
STR rfafwRev0	1.3.6.1.4.1.1166.6.1.2.22.5.4.12	DisplayString	read-only	This object provides the Revision of the firmware stores in bank 0.
STR rfafwRev1	1.3.6.1.4.1.1166.6.1.2.22.5.4.13	DisplayString	read-only	This object provides the Revision of the firmware stores in bank 1.
INT rfagx2Rfa1000AnalogTableIndex	1.3.6.1.4.1.1166.6.1.2.22.2.1.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT rfagx2Rfa1000DigitalTableIndex	1.3.6.1.4.1.1166.6.1.2.22.3.2.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT rfagx2Rfa1000FactoryTableIndex	1.3.6.1.4.1.1166.6.1.2.22.5.4.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT rfagx2Rfa1000StatusTableIndex	1.3.6.1.4.1.1166.6.1.2.22.4.3.1	INTEGER	read-only	The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
INT rfahourMeter	1.3.6.1.4.1.1166.6.1.2.22.5.4.9	INTEGER	read-only	This object provides the hour meter reading of the module.
STR rfalabel12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.24	DisplayString	read-only	The value of this object provides the label of the 12v Current Analog parameter.
STR rfalabelAlarmDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.11	DisplayString	read-only	The value of this object provides the label of the Alarm Data CRC Status parameter.
STR rfalabelAttnCalDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.17	DisplayString	read-only	The value of this object provides the label of the Factor Cal Setting CRC Status parameter.
STR rfalabelAttnSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.6	DisplayString	read-only	The value of this object provides the label of the RX1000's AttnSetting Digital parameter.
STR rfalabelBoot	1.3.6.1.4.1.1166.6.1.2.22.4.3.2	DisplayString	read-only	The value of this object provides the label of the Boot Status Status parameter.
STR rfalabelFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.8	DisplayString	read-only	The value of this object provides the label of the Factory Data CRC Status parameter.
STR rfalabelFactoryDefault	1.3.6.1.4.1.1166.6.1.2.22.3.2.10	DisplayString	read-only	The value of this object provides the label of the Factory Default Reset Digital parameter.
STR rfalabelFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.13	DisplayString	read-only	The value of this object provides the label of the Fan Current Analog parameter.
STR rfalabelFlash	1.3.6.1.4.1.1166.6.1.2.22.4.3.5	DisplayString	read-only	The value of this object provides the label of the Flash Status Status parameter.
STR rfalabelModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.2	DisplayString	read-only	The value of this object provides the label of the Module Temperature Analog parameter.
STR rfalabelSlopeCalDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.14	DisplayString	read-only	The value of this object provides the label of the Calibration Data CRC Status parameter.
STR rfalabelSlopeSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.2	DisplayString	read-only	The value of this object provides the label of the RX1000's AttnSetting Digital parameter.
FLO rfamajorHigh12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.26	Float	read-only	The value of this object provides the Major High alarm value of the 12 Volt Current Analog parameter.
FLO rfamajorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.15	Float	read-only	The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
FLO rfamajorHighModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.4	Float	read-only	The value of this object provides the Major High alarm value of the Module Temperature Analog parameter. This value is a floating point number that is represented as an IEEE 32 bit number.
FLO rfamajorLow12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.27	Float	read-only	The value of this object provides the Major Low alarm value of the 12 Volt Current Analog parameter.
FLO rfamajorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.16	Float	read-only	The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
FLO rfamajorLowModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.5	Float	read-only	The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
FLO rfamaxValue12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.33	Float	read-only	The value of this object provides the maximum value of the 12 Volt Current Analog parameter.
FLO rfamaxValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.22	Float	read-only	The value of this object provides the maximum value of the Fan Current Analog parameter.
FLO rfamaxValueModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.11	Float	read-only	The value of this object provides the maximum value of the Module Temperature Analog parameter.
FLO rfaminorHigh12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.28	Float	read-only	The value of this object provides the Minor High alarm value of the 12 Volt Current Analog parameter.
FLO rfaminorHighFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.17	Float	read-only	The value of this object provides the Minor High alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence
FLO rfaminorHighModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.6	Float	read-only	The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
FLO rfaminorLow12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.29	Float	read-only	The value of this object provides the Minor Low alarm value of the 12 Volt Current Analog parameter.
FLO rfaminorLowFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.18	Float	read-only	The value of this object provides the Minor Low alarm value of the Fan Current Analog parameter. This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . This object is kept here for persistence
FLO rfaminorLowModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.7	Float	read-only	The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
FLO rfaminValue12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.32	Float	read-only	The value of this object provides the minimum value of the 12 Volt Current Analog parameter.
FLO rfaminValueFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.21	Float	read-only	The value of this object provides the minimum value of the Fan Current Analog parameter.
FLO rfaminValueModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.10	Float	read-only	The value of this object provides the minimum value of the Module Temperature Analog parameter.
INT rfaprgEEPROMByte	1.3.6.1.4.1.1166.6.1.2.22.5.4.6	INTEGER	read-only	This object indicates if the EEPROM has been programmed
INT rfastateFlag12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.31	INTEGER	read-only	The value of this object provides the state of the 12v Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateflagAlarmDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateflagAttnCalDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.19	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateFlagAttnSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.9	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateflagBoot	1.3.6.1.4.1.1166.6.1.2.22.4.3.4	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateflagFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.10	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateFlagFactoryDefault	1.3.6.1.4.1.1166.6.1.2.22.3.2.13	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateFlagFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.20	INTEGER	read-only	The value of this object provides the state of the Fan Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateflagFlash	1.3.6.1.4.1.1166.6.1.2.22.4.3.7	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateFlagModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.9	INTEGER	read-only	The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateflagSlopeCalDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.16	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
INT rfastateFlagSlopeSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.5	INTEGER	read-only	The value of this object provides the state of the the parameter. (1-hidden 2-read-only, 3-updateable).
STR rfauom12Volt	1.3.6.1.4.1.1166.6.1.2.22.2.1.25	DisplayString	read-only	The value of this object provides the Unit of Measure of the 12v Current Analog parameter. The unit of measure for this parameter is mA
STR rfauomFanCurrent	1.3.6.1.4.1.1166.6.1.2.22.2.1.14	DisplayString	read-only	The value of this object provides the Unit of Measure of the Fan Current Analog parameter. The unit of measure for this parameter is mA
STR rfauomModTemp	1.3.6.1.4.1.1166.6.1.2.22.2.1.3	DisplayString	read-only	The value of this object provides the Unit of Measure of the Module Temperature Analog parameter. The unit of measure for this parameter is Degrees C
INT rfavalueAlarmDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.12	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT rfavalueAttnCalDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.18	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT rfavalueAttnSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.8	INTEGER	read-write	The value of this object is the current value of the parameter. It is an integer value from 1to 21 Each increment represents 1/4 dB of attenuation from 0 to 5 dB. Where 1 = 0db and 21 = 5db
INT rfavalueBoot	1.3.6.1.4.1.1166.6.1.2.22.4.3.3	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT rfavalueFactoryDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.9	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT rfavalueFactoryDefault	1.3.6.1.4.1.1166.6.1.2.22.3.2.12	INTEGER	read-write	The value of this object is the current value of the parameter.This parameter will always read off(1)
INT rfavalueFlash	1.3.6.1.4.1.1166.6.1.2.22.4.3.6	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT rfavalueSlopeCalDataCRC	1.3.6.1.4.1.1166.6.1.2.22.4.3.15	INTEGER	read-only	The value of this object provides the current state of the parameter (1-ok, 2-undetermined 3-warning, 4-minor, 5-major, 6-critical).
INT rfavalueSlopeSetting	1.3.6.1.4.1.1166.6.1.2.22.3.2.4	INTEGER	read-write	The value of this object is the current value of the parameter. It is an integer value from 1 to 7. Each increment represents 1/2 dB of slope from 1 to 4 dB. Where 1 = 1db and 7 = 4db
NTF trapRFA1000AlarmDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.9			This trap is issued when the RFA1000 Module detects an error calculating the alarm limit CRC.
NTF trapRFA1000AttnCalDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.12			This trap is issued when the RFA1000 Module detects an Attenuation Calibration Data CRC alarm.
NTF trapRFA1000Boot0Alarm	1.3.6.1.4.1.1166.6.1.2.22.0.6			This trap is issued when the RFA1000 Module's Bank 0 Boot sequence has detected an error.
NTF trapRFA1000Boot1Alarm	1.3.6.1.4.1.1166.6.1.2.22.0.7			This trap is issued when the RFA1000 Module's Bank 1 Boot sequence has detected an error.
NTF trapRFA1000ConfigChangeDisplayString	1.3.6.1.4.1.1166.6.1.2.22.0.2			This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapRFA1000ConfigChangeInteger	1.3.6.1.4.1.1166.6.1.2.22.0.1			This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
NTF trapRFA1000FactoryDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.10			This trap is issued when the RFA1000 Module detects an error calculating the Factory data CRC.
NTF trapRFA1000FanCurrentAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.4			This trap is issued when the RFA1000 Module's Fan Currrent parameter goes out of range.
NTF trapRFA1000FlashAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.8			This trap is issued when the RFA1000 Module's boot or flash programming sequence has detected a Flash error.
NTF trapRFA1000ModuleTemperatureAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.3			This trap is issued when the RFA1000 Module's Temperature goes out of range.
NTF trapRFA1000Plus12CurrentAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.5			This trap is issued when the RFA1000 Module's positive 12 volt current parameter goes out of range.
NTF trapRFA1000ResetFacDefault	1.3.6.1.4.1.1166.6.1.2.22.0.13			This trap is issued when the RFA1000 resets to factory defaults
NTF trapRFA1000SlopeCalDataCRCAlarm	1.3.6.1.4.1.1166.6.1.2.22.0.11			This trap is issued when the RFA1000 Module detects an error calculating the Slope Calibration data CRC.

RFC description

Management of OMNISTAR RF Amplifier modules in HFC network environments.

Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RFA1000 RF amplifier module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OMNI-gx2RFA1000-MIB

What Is OMNI-gx2RFA1000-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description