All MIBs › OMNI-gx2RFA1000-MIB › gx2Rfa1000HoldTimeData
gx2Rfa1000HoldTimeData
Module: OMNI-gx2RFA1000-MIB
OID (symbolic): OMNI-gx2RFA1000-MIB::gx2Rfa1000HoldTimeData
OID (numeric): 1.3.6.1.4.1.1166.6.1.2.22.6.5.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of this object provides access to the hold timers used to suppress nose on analog objects. This object is a 32 bit object. Validation data is entered into bytes zero and one of the object. Bytes three and four are used to entering the hold time for the specified alarm object. The Hold timer data ranges from 0 to 1300 seconds. The index of this object corresponds to the alarm object to be modified. Alarm Hold timers correspond to the index of this object as follows: Index 1 = xxx, index 2 = xxxx, Index 3 = xxxx, The hold time is represented in seconds.
What is gx2Rfa1000HoldTimeData?
Sets the hold (debounce) time, in seconds from 0 to 1300, used to suppress noise on the alarm identified by this row's index before an alarm condition is reported. An admin raises this on a module that's throwing nuisance alarms from brief, transient readings, so only a sustained out-of-range condition actually triggers an alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.22.6.5.3 snmpwalk -v2c -c public <target> OMNI-gx2RFA1000-MIB::gx2Rfa1000HoldTimeData
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1166.6.1.2.22.6.5.3.1 snmpget -v2c -c public <target> OMNI-gx2RFA1000-MIB::gx2Rfa1000HoldTimeData.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1166.6.1.2.22.6.5.3.1 i <value>
Start monitoring General Instrument OmniStar GX2 HFC headend/optical node (GX2 RFA1000 RF amplifier module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OMNI-gx2RFA1000-MIB::gx2Rfa1000HoldTimeData OID value, configure state conditions and alerts, and monitor any General Instrument OmniStar GX2 HFC headend/optical node (GX2 RFA1000 RF amplifier module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1166 | gi | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6 | motproxies | BCS-IDENT-MIB |
| 1.3.6.1.4.1.1166.6.1 | hfc | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2 | hfcDevices | GX2HFC-MIB |
| 1.3.6.1.4.1.1166.6.1.2.22 | gx2Rfa1000 | GX2HFC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1166.6.1.2.22.6 | gx2Rfa1000HoldTimeTable | OMNI-gx2RFA1000-MIB |
| 1.3.6.1.4.1.1166.6.1.2.22.6.5 | gx2Rfa1000HoldTimeEntry | OMNI-gx2RFA1000-MIB |
| 1.3.6.1.4.1.1166.6.1.2.22.6.5.3 | gx2Rfa1000HoldTimeData | OMNI-gx2RFA1000-MIB |