OCCAM-ENTITY-MIB

All MIBs › OCCAM-ENTITY-MIB

Organization: Occam Networks

Last Updated: 2009--0-9-

Category: DSL and Broadband Access

Description: Manages physical and logical entity inventory including cards and modules for Occam Networks DSL broadband platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OCCAM-ENTITY-MIB?

OCCAM-ENTITY-MIB is Occam Networks' implementation of an entity-style inventory MIB, used to represent the multiple logical/physical entities (chassis, cards, ports) managed by a single SNMP agent on Occam's DSL/broadband access platforms. Following the pattern of the standard IETF ENTITY-MIB, it models a hierarchy of physical entities with descriptive and inventory attributes such as entity class, name, and containment relationships. Its monitoring value is primarily around hardware inventory and presence/status - confirming which cards, modules, and ports are physically present and how they map to logical entities - which is foundational for correlating other performance/fault data to specific hardware slots. It closely mirrors and depends on the structure of the standard IETF ENTITY-MIB (RFC 4133) even though it is implemented as a private module. It is typically deployed on Occam Networks broadband access/DSLAM platforms where operators need to enumerate installed line cards and modules via SNMP. Engineers can download the OCCAM-ENTITY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OCCAM-ENTITY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Occam Networks DSL/broadband access platform (DSLAM)

Monitoring Examples

No sample object names were provided for this module in this batch, so a concrete OID-level monitoring scenario cannot be given honestly; in general, an entity-style MIB like this would be polled for its physical-entity table (analogous to entPhysicalTable in the standard Entity MIB) to enumerate installed cards/modules and detect insertions or removals, but the specific Occam object names are not available here.

Imported Objects

From OCCAM-REG-MODULE

occamGenericHardwareModules

OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
enterprises
mib-2

From SNMPv2-TC

AutonomousType
DateAndTime
MacAddress
PhysAddress
RowPointer
TAddress
TDomain
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
mgmt	1.3.6.1.2
entityMIB	1.3.6.1.4.1.6066.2.1.3.1			The MIB module for representing multiple logical entities supported by a single SNMP agent.
entityMIBObjects	1.3.6.1.4.1.6066.2.1.3.1.1
STR entityCompanyName	1.3.6.1.4.1.6066.2.1.3.1.1.1	SnmpAdminString	read-only	The name of the Company which built the product. In our case it is Occam Networks Inc.
MAC entityMacAddress	1.3.6.1.4.1.6066.2.1.3.1.1.2	MacAddress	read-only	This object contains the MAC Address of an ethernet interface. For other physical entities it is an octet string of length 0
STR entityBoardName	1.3.6.1.4.1.6066.2.1.3.1.1.3	SnmpAdminString	read-only	The textual name of the Board.
STR entityBoardAssembly	1.3.6.1.4.1.6066.2.1.3.1.1.4	SnmpAdminString	read-only	An in-house classification of the board.
STR entityBoardType	1.3.6.1.4.1.6066.2.1.3.1.1.5	SnmpAdminString	read-only	The type of board that is present.
STR entitySerialNum	1.3.6.1.4.1.6066.2.1.3.1.1.6	SnmpAdminString	read-only	The vendor-specific serial number string for the physical entity.
STR entityHardwareRev	1.3.6.1.4.1.6066.2.1.3.1.1.7	SnmpAdminString	read-only	The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation- specific manner. If no specific hardware revision string is associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
STR entityFirmwareRev	1.3.6.1.4.1.6066.2.1.3.1.1.8	SnmpAdminString	read-only	The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation- specific manner. If no specific firmware programs are associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
STR entitySoftwareRev	1.3.6.1.4.1.6066.2.1.3.1.1.9	SnmpAdminString	read-only	The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format, in an implementation- specific manner. If no specific software programs are associated with the physical component, or this information is unknown to the agent, then this object will contain a zero-length string.
STR entityMfgDate	1.3.6.1.4.1.6066.2.1.3.1.1.10	SnmpAdminString	read-only	The date when this physical component was manufactured. The preferred value is the manufacturer date printed on the component itself(if present). If the manufacturer date associated with the physical component is unknown to the agent, then this object will contain a zero-length string.
entityPortTable	1.3.6.1.4.1.6066.2.1.3.1.1.11		not-accessible	This table contains one row per port entity.
entityPortEntry	1.3.6.1.4.1.6066.2.1.3.1.1.11.1		not-accessible	Information about a particular port.
PHY entityPortShelfIndex	1.3.6.1.4.1.6066.2.1.3.1.1.11.1.1	PhysicalIndex	read-only	The shelf number which contains the slot that contains this port.
PHY entityPortSlotIndex	1.3.6.1.4.1.6066.2.1.3.1.1.11.1.2	PhysicalIndex	read-only	The slot number associated with this port.
PHY entityPortIndex	1.3.6.1.4.1.6066.2.1.3.1.1.11.1.3	PhysicalIndex	read-only	The number of the port in the slot specified by entitySlotIndex, and the shelf specified by entityShelfIndex.
STR entityPortName	1.3.6.1.4.1.6066.2.1.3.1.1.11.1.4	SnmpAdminString	read-only	The textual name of the port. The value of this object should be the name as assigned by the local device and should be suitable for usein commands entered at the device's console.
STR entitySoftwareRevExt	1.3.6.1.4.1.6066.2.1.3.1.1.13	SnmpAdminString	read-only	The Occam software revision extension in 'TagTagrev_SuffixSuffixrev' format (i.e. R3_P1). In this example the Tag is R, the Tagrev is 3, the Suffix is P, and the Suffixrev is 1.
STR entityOntSlotId	1.3.6.1.4.1.6066.2.1.3.1.1.14	SnmpAdminString	read-only	The slot identifier configured on this entity, intended for within a daisy chained application. This object is applicable to active ONTs.
entityMIBTraps	1.3.6.1.4.1.6066.2.1.3.1.2
entityMIBConformance	1.3.6.1.4.1.6066.2.1.3.1.3
entityMIBGroups	1.3.6.1.4.1.6066.2.1.3.1.3.1
entityMIBObjGroups	1.3.6.1.4.1.6066.2.1.3.1.3.1.1
entityPhysicalGroup	1.3.6.1.4.1.6066.2.1.3.1.3.1.1.1			The collection of objects which are used to represent the physical system for which a single agent provides management information.
entityMIBEventGroups	1.3.6.1.4.1.6066.2.1.3.1.3.1.2
entityMIBCompliances	1.3.6.1.4.1.6066.2.1.3.1.3.2
entityCompliance	1.3.6.1.4.1.6066.2.1.3.1.3.2.1			The compliance statement for SNMP entities which implement the Entity MIB.

RFC description

Manages physical and logical entities for Occam Networks devices supporting multiple entities per SNMP agent.

Start monitoring Occam Networks DSL/broadband access platform (DSLAM) (entity/card inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OCCAM-ENTITY-MIB

What Is OCCAM-ENTITY-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description