Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB :: mscAcUseridCustomerIdentifier

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB › mscAcUseridCustomerIdentifier

mscAcUseridCustomerIdentifier

Module: Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB::mscAcUseridCustomerIdentifier

OID (numeric): 1.3.6.1.4.1.562.36.2.1.18.2.10.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute indicates the Customer Identifier (CID) assigned to the userid. The CID is used in Customer Network Management (CNM). A CNM operator may only send commands to components provisioned with the same CID as the operator. A CNM operator will only receive event data, such as alarms, which is generated by components provisioned with the same CID as the operator. The special CID of 0 is reserved for the network owner, known as the Netman. The Passport CID attribute is compatible with DPN-100 Netman and Basic CIDs.

What is mscAcUseridCustomerIdentifier?

The Customer Identifier (CID) assigned to this userid for Customer Network Management; an operator can only command, and only receives alarms from, components provisioned with the same CID, with CID 0 reserved for the network owner (Netman).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.18.2.10.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB::mscAcUseridCustomerIdentifier

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.18.2.10.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB::mscAcUseridCustomerIdentifier.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.18.2.10.1.2.1 i <value>

Start monitoring Nortel/Bay Networks MscPassport switch (management interface ports) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-MgmtInterfacesMIB::mscAcUseridCustomerIdentifier OID value, configure state conditions and alerts, and monitor any Nortel/Bay Networks MscPassport switch (management interface ports) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.18mscAcNortel-MsCarrier-MscPassport-MgmtInterfacesMIB
1.3.6.1.4.1.562.36.2.1.18.2mscAcUseridNortel-MsCarrier-MscPassport-MgmtInterfacesMIB
1.3.6.1.4.1.562.36.2.1.18.2.10mscAcUseridProvTableNortel-MsCarrier-MscPassport-MgmtInterfacesMIB
1.3.6.1.4.1.562.36.2.1.18.2.10.1mscAcUseridProvEntryNortel-MsCarrier-MscPassport-MgmtInterfacesMIB
1.3.6.1.4.1.562.36.2.1.18.2.10.1.2mscAcUseridCustomerIdentifierNortel-MsCarrier-MscPassport-MgmtInterfacesMIB