All MIBs › Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB
Category: Diagnostics & Testing, Frame Relay, Nortel MsCarrier MscPassport
Description: Defines SNMP objects for Frame Relay trace receiver and diagnostic capture on Nortel MsCarrier MscPassport switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB?
This is a vendor-specific MIB from Nortel for its MainStreet Carrier / Passport (MscPassport) multiservice switching platform, defining objects for a Frame Relay trace receiver used to capture diagnostic traces of Frame Relay traffic. It exposes row-status-controlled tables for configuring trace receiver instances and their associated DNA (data network address) components, using standard RowStatus/StorageType conventions for dynamic creation and deletion of trace sessions. Its monitoring role is largely configuration/diagnostic in nature rather than continuous hardware telemetry: administrators create and check mscTraceRcvrFrRowStatusTable entries to confirm a trace capture session is active, storage type is set appropriately (volatile vs. nonvolatile), and the correct component/DNA is being traced, which is used to diagnose Frame Relay circuit problems on demand. It depends on Nortel's broader MscPassport Frame Relay and trace-receiver MIB family and the standard SNMPv2 RowStatus textual convention. It is deployed on Nortel Passport/MscPassport multiservice switches in carrier Frame Relay networks for on-demand traffic tracing during troubleshooting. Engineers can download the Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-MsCarrier-MscPassport-FrTraceRcvrMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel MainStreet Carrier / Passport (MscPassport) multiservice switch
Monitoring Examples
A technician creates an entry in mscTraceRcvrFrRowStatusTable/mscTraceRcvrFrRowStatusEntry, setting mscTraceRcvrFrRowStatus to active and mscTraceRcvrFrComponentName to the Frame Relay component being diagnosed, using mscTraceRcvrFrIndex to identify the trace session and mscTraceRcvrFrStorageType to control whether it persists across reboots. The companion mscTraceRcvrFrDnaRowStatusTable (mscTraceRcvrFrDnaRowStatusEntry, mscTraceRcvrFrDnaComponentName) associates a specific DNA/circuit with the trace, letting the operator isolate captured traffic to one Frame Relay path while diagnosing intermittent packet loss.
What Can Be Monitored
- trace receiver session status (row status)
- trace receiver storage type (volatile/nonvolatile)
- traced Frame Relay component/DNA association
- trace session index/identity
This MIB depends on
Related MIBs
Imported Objects
From Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB
| DisplayString | |
| Integer32 | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-MsCarrier-MscPassport-TextualConventionsMIB
| AsciiString | |
| DigitString | |
| EnterpriseDateAndTime | |
| Hex | |
| HexString | |
| NonReplicated |
From Nortel-MsCarrier-MscPassport-TraceBaseMIB
| mscTraceIndex | OBJECT-TYPE |
| mscTraceRcvr | OBJECT-IDENTITY |
| mscTraceRcvrIndex | OBJECT-TYPE |
| mscTraceSession | OBJECT-IDENTITY |
| mscTraceSessionIndex | OBJECT-TYPE |
From Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
| mscPassportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mscTraceRcvrFr | 1.3.6.1.4.1.562.36.2.1.106.2.3 | |||
| mscTraceRcvrFrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.1 | not-accessible | This entry controls the addition and deletion of mscTraceRcvrFr components. | |
| mscTraceRcvrFrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1 | not-accessible | A single entry in the table represents a single mscTraceRcvrFr component. | |
| ROW mscTraceRcvrFrRowStatus | 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscTraceRcvrFr components. These components can be added and deleted. |
| STR mscTraceRcvrFrComponentName | 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscTraceRcvrFrStorageType | 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTraceRcvrFr tables. |
| NON mscTraceRcvrFrIndex | 1.3.6.1.4.1.562.36.2.1.106.2.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscTraceRcvrFr tables. |
| mscTraceRcvrFrDna | 1.3.6.1.4.1.562.36.2.1.106.2.3.2 | |||
| mscTraceRcvrFrDnaRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1 | not-accessible | This entry controls the addition and deletion of mscTraceRcvrFrDna components. | |
| mscTraceRcvrFrDnaRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1 | not-accessible | A single entry in the table represents a single mscTraceRcvrFrDna component. | |
| ROW mscTraceRcvrFrDnaRowStatus | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTraceRcvrFrDna components. These components cannot be added nor deleted. |
| STR mscTraceRcvrFrDnaComponentName | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscTraceRcvrFrDnaStorageType | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTraceRcvrFrDna tables. |
| NON mscTraceRcvrFrDnaIndex | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscTraceRcvrFrDna tables. |
| mscTraceRcvrFrDnaCug | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2 | |||
| mscTraceRcvrFrDnaCugRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1 | not-accessible | This entry controls the addition and deletion of mscTraceRcvrFrDnaCug components. | |
| mscTraceRcvrFrDnaCugRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1 | not-accessible | A single entry in the table represents a single mscTraceRcvrFrDnaCug component. | |
| ROW mscTraceRcvrFrDnaCugRowStatus | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of mscTraceRcvrFrDnaCug components. These components can be added and deleted. |
| STR mscTraceRcvrFrDnaCugComponentName | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscTraceRcvrFrDnaCugStorageType | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTraceRcvrFrDnaCug tables. |
| I32 mscTraceRcvrFrDnaCugIndex | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the mscTraceRcvrFrDnaCug tables. |
| mscTraceRcvrFrDnaCugCugOptionsTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10 | not-accessible | Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group. | |
| mscTraceRcvrFrDnaCugCugOptionsEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1 | not-accessible | An entry in the mscTraceRcvrFrDnaCugCugOptionsTable. | |
| INT mscTraceRcvrFrDnaCugType | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.1 | INTEGER | read-write | This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries. |
| STR mscTraceRcvrFrDnaCugDnic | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.2 | DigitString | read-write | This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T. |
| U32 mscTraceRcvrFrDnaCugInterlockCode | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.3 | Unsigned32 | read-write | This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode. |
| INT mscTraceRcvrFrDnaCugPreferential | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.4 | INTEGER | read-only | This attribute specifies that this Cug is to be used on all outgoing calls to the Frame Relay trace receiver. |
| INT mscTraceRcvrFrDnaCugOutCalls | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.5 | INTEGER | read-only | This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug. |
| INT mscTraceRcvrFrDnaCugIncCalls | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.6 | INTEGER | read-only | This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug. |
| INT mscTraceRcvrFrDnaCugPrivileged | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.2.10.1.7 | INTEGER | read-only | This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug. |
| mscTraceRcvrFrDnaAddressTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10 | not-accessible | This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits. | |
| mscTraceRcvrFrDnaAddressEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10.1 | not-accessible | An entry in the mscTraceRcvrFrDnaAddressTable. | |
| INT mscTraceRcvrFrDnaNumberingPlanIndicator | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10.1.1 | INTEGER | read-write | This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan. |
| STR mscTraceRcvrFrDnaDataNetworkAddress | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.10.1.2 | DigitString | read-write | The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits. |
| mscTraceRcvrFrDnaOutgoingOptionsTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11 | not-accessible | This group defines the call options for outgoing calls. | |
| mscTraceRcvrFrDnaOutgoingOptionsEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1 | not-accessible | An entry in the mscTraceRcvrFrDnaOutgoingOptionsTable. | |
| INT mscTraceRcvrFrDnaOutCalls | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.1 | INTEGER | read-only | This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component. |
| INT mscTraceRcvrFrDnaOutDefaultPriority | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.7 | INTEGER | read-write | If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority. |
| INT mscTraceRcvrFrDnaOutIntl | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.8 | INTEGER | read-only | This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed. |
| INT mscTraceRcvrFrDnaOutDefaultPathReliability | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.14 | INTEGER | read-only | This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication. |
| INT mscTraceRcvrFrDnaOutPathReliabilityOverRide | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.15 | INTEGER | read-only | This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end. |
| INT mscTraceRcvrFrDnaOutPathReliabilitySignal | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.16 | INTEGER | read-only | This attribute specifies that reliability routing signaling is not used. |
| INT mscTraceRcvrFrDnaOutAccess | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.11.1.17 | INTEGER | read-write | This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature. |
| mscTraceRcvrFrDnaIncomingOptionsTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.12 | not-accessible | This group defines the call options for incoming calls. | |
| mscTraceRcvrFrDnaIncomingOptionsEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.12.1 | not-accessible | An entry in the mscTraceRcvrFrDnaIncomingOptionsTable. | |
| INT mscTraceRcvrFrDnaIncCalls | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.12.1.1 | INTEGER | read-only | This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna. |
| mscTraceRcvrFrDnaCallOptionsTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13 | not-accessible | The CallOptions group defines additional options for calls which are not specific to the direction of the call. | |
| mscTraceRcvrFrDnaCallOptionsEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1 | not-accessible | An entry in the mscTraceRcvrFrDnaCallOptionsTable. | |
| OCT mscTraceRcvrFrDnaPacketSizes | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.2 | OCTET STRING | read-only | This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8) |
| INT mscTraceRcvrFrDnaDefaultRecvFrmNetworkPacketSize | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.3 | INTEGER | read-only | This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna. |
| INT mscTraceRcvrFrDnaDefaultSendToNetworkPacketSize | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.4 | INTEGER | read-only | This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna. |
| INT mscTraceRcvrFrDnaCugFormat | 1.3.6.1.4.1.562.36.2.1.106.2.3.2.13.1.10 | INTEGER | read-only | This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long. |
| mscTraceRcvrFrDc | 1.3.6.1.4.1.562.36.2.1.106.2.3.3 | |||
| mscTraceRcvrFrDcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1 | not-accessible | This entry controls the addition and deletion of mscTraceRcvrFrDc components. | |
| mscTraceRcvrFrDcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1 | not-accessible | A single entry in the table represents a single mscTraceRcvrFrDc component. | |
| ROW mscTraceRcvrFrDcRowStatus | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTraceRcvrFrDc components. These components cannot be added nor deleted. |
| STR mscTraceRcvrFrDcComponentName | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscTraceRcvrFrDcStorageType | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTraceRcvrFrDc tables. |
| NON mscTraceRcvrFrDcIndex | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscTraceRcvrFrDc tables. |
| mscTraceRcvrFrDcOptionsTable | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10 | not-accessible | The Options group defines attributes associated with the SVC direct call. | |
| mscTraceRcvrFrDcOptionsEntry | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1 | not-accessible | An entry in the mscTraceRcvrFrDcOptionsTable. | |
| INT mscTraceRcvrFrDcRemoteNpi | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.3 | INTEGER | read-write | This attribute indicates the numbering plan used for the remoteDna. |
| STR mscTraceRcvrFrDcRemoteDna | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.4 | DigitString | read-write | This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the Frame Relay trace receiver which will receive the trace data. |
| INT mscTraceRcvrFrDcType | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.6 | INTEGER | read-only | This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection. |
| STR mscTraceRcvrFrDcUserData | 1.3.6.1.4.1.562.36.2.1.106.2.3.3.10.1.8 | HexString | read-write | This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE. |
| mscTraceSessionFr | 1.3.6.1.4.1.562.36.2.1.106.3.3 | |||
| mscTraceSessionFrRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.3.3.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTraceSessionFr components. | |
| mscTraceSessionFrRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1 | not-accessible | A single entry in the table represents a single mscTraceSessionFr component. | |
| ROW mscTraceSessionFrRowStatus | 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTraceSessionFr components. These components cannot be added nor deleted. |
| STR mscTraceSessionFrComponentName | 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscTraceSessionFrStorageType | 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTraceSessionFr tables. |
| NON mscTraceSessionFrIndex | 1.3.6.1.4.1.562.36.2.1.106.3.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscTraceSessionFr tables. |
| mscTraceSessionFrVc | 1.3.6.1.4.1.562.36.2.1.106.3.3.2 | |||
| mscTraceSessionFrVcRowStatusTable | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mscTraceSessionFrVc components. | |
| mscTraceSessionFrVcRowStatusEntry | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1 | not-accessible | A single entry in the table represents a single mscTraceSessionFrVc component. | |
| ROW mscTraceSessionFrVcRowStatus | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of mscTraceSessionFrVc components. These components cannot be added nor deleted. |
| STR mscTraceSessionFrVcComponentName | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO mscTraceSessionFrVcStorageType | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the mscTraceSessionFrVc tables. |
| NON mscTraceSessionFrVcIndex | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the mscTraceSessionFrVc tables. |
| mscTraceSessionFrVcCadTable | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application. | |
| mscTraceSessionFrVcCadEntry | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1 | not-accessible | An entry in the mscTraceSessionFrVcCadTable. | |
| INT mscTraceSessionFrVcType | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.1 | INTEGER | read-only | This attribute displays the type of call, pvc,svc,spvc or frf10spvc. |
| INT mscTraceSessionFrVcState | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.2 | INTEGER | read-only | This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4. |
| INT mscTraceSessionFrVcPreviousState | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.3 | INTEGER | read-only | This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing. |
| U32 mscTraceSessionFrVcDiagnosticCode | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.4 | Unsigned32 | read-only | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| U32 mscTraceSessionFrVcPreviousDiagnosticCode | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.5 | Unsigned32 | read-only | This attribute displays the internal substate of call control. It is used to further refine state of call processing. |
| INT mscTraceSessionFrVcCalledNpi | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.6 | INTEGER | read-only | This attribute displays the Numbering Plan Indicator (NPI) of the called end. |
| STR mscTraceSessionFrVcCalledDna | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.7 | DigitString | read-only | This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection. |
| U32 mscTraceSessionFrVcCalledLcn | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.8 | Unsigned32 | read-only | This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information. |
| INT mscTraceSessionFrVcCallingNpi | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.9 | INTEGER | read-only | This attribute displays the Numbering Plan Indicator (NPI) of the calling end. |
| STR mscTraceSessionFrVcCallingDna | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.10 | DigitString | read-only | This attribute displays the Data Network Address (Dna) of the calling end. |
| U32 mscTraceSessionFrVcCallingLcn | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.11 | Unsigned32 | read-only | This attribute displays the Logical Channel Number of the calling end. |
| INT mscTraceSessionFrVcAccountingEnabled | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.12 | INTEGER | read-only | This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options. |
| INT mscTraceSessionFrVcFastSelectCall | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.13 | INTEGER | read-only | This attribute displays that this is a fast select call. |
| INT mscTraceSessionFrVcPathReliability | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.19 | INTEGER | read-only | This attribute displays the path reliability. |
| INT mscTraceSessionFrVcAccountingEnd | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.20 | INTEGER | read-only | This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record. |
| INT mscTraceSessionFrVcPriority | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.21 | INTEGER | read-only | This attribute displays whether the call is a normal or a high priority call. |
| U32 mscTraceSessionFrVcSegmentSize | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.22 | Unsigned32 | read-only | This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received. |
| U32 mscTraceSessionFrVcMaxSubnetPktSize | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.27 | Unsigned32 | read-only | This attribute indicates the maximum packet size allowed on the Vc. |
| INT mscTraceSessionFrVcRcosToNetwork | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.28 | INTEGER | read-only | This attribute indicates the routing metric routing class of service to the network. |
| INT mscTraceSessionFrVcRcosFromNetwork | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.29 | INTEGER | read-only | This attribute displays the routing metric Routing Class of Service from the Network. |
| INT mscTraceSessionFrVcEmissionPriorityToNetwork | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.30 | INTEGER | read-only | This attribute displays the network internal emission priotity to the network. |
| INT mscTraceSessionFrVcEmissionPriorityFromNetwork | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.31 | INTEGER | read-only | This attribute displays the network internal emission priotity from the network. |
| STR mscTraceSessionFrVcDataPath | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.10.1.32 | AsciiString | read-only | This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed. |
| mscTraceSessionFrVcIntdTable | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued. | |
| mscTraceSessionFrVcIntdEntry | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1 | not-accessible | An entry in the mscTraceSessionFrVcIntdTable. | |
| HEX mscTraceSessionFrVcCallReferenceNumber | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.1 | Hex | read-only | This attribute is obsolete. It is replaced by the callReferenceNumber attribute to display the call reference number in decimal. The SNMP reference for the callReferenceNumber attribute is callReferenceNumberDecimal. |
| U32 mscTraceSessionFrVcElapsedTimeTillNow | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.2 | Unsigned32 | read-only | This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started. |
| U32 mscTraceSessionFrVcSegmentsRx | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.3 | Unsigned32 | read-only | This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state. |
| U32 mscTraceSessionFrVcSegmentsSent | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.4 | Unsigned32 | read-only | This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet. |
| ENT mscTraceSessionFrVcStartTime | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.5 | EnterpriseDateAndTime | read-only | This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes. |
| U32 mscTraceSessionFrVcCallReferenceNumberDecimal | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.11.1.7 | Unsigned32 | read-only | This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call. |
| mscTraceSessionFrVcFrdTable | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers | |
| mscTraceSessionFrVcFrdEntry | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1 | not-accessible | An entry in the mscTraceSessionFrVcFrdTable. | |
| U32 mscTraceSessionFrVcFrmCongestedToSubnet | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.2 | Unsigned32 | read-only | This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size. |
| U32 mscTraceSessionFrVcCannotForwardToSubnet | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.3 | Unsigned32 | read-only | This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well. |
| U32 mscTraceSessionFrVcNotDataXferToSubnet | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.4 | Unsigned32 | read-only | This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure. |
| U32 mscTraceSessionFrVcOutOfRangeFrmFromSubnet | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.5 | Unsigned32 | read-only | This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late. |
| U32 mscTraceSessionFrVcCombErrorsFromSubnet | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.6 | Unsigned32 | read-only | This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc |
| U32 mscTraceSessionFrVcDuplicatesFromSubnet | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.7 | Unsigned32 | read-only | This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased. |
| U32 mscTraceSessionFrVcNotDataXferFromSubnet | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.8 | Unsigned32 | read-only | This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery. |
| U32 mscTraceSessionFrVcFrmLossTimeouts | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.9 | Unsigned32 | read-only | This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet. |
| U32 mscTraceSessionFrVcOoSeqByteCntExceeded | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.10 | Unsigned32 | read-only | This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count. |
| U32 mscTraceSessionFrVcPeakOoSeqPktCount | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.11 | Unsigned32 | read-only | This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc. |
| U32 mscTraceSessionFrVcPeakOoSeqFrmForwarded | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.12 | Unsigned32 | read-only | This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue. |
| U32 mscTraceSessionFrVcSendSequenceNumber | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.13 | Unsigned32 | read-only | This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame. |
| U32 mscTraceSessionFrVcPktRetryTimeouts | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.15 | Unsigned32 | read-only | This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet. |
| U32 mscTraceSessionFrVcPeakRetryQueueSize | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.16 | Unsigned32 | read-only | This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets. |
| U32 mscTraceSessionFrVcSubnetRecoveries | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.17 | Unsigned32 | read-only | This attribute displays the number of successful Vc recovery attempts. |
| U32 mscTraceSessionFrVcOoSeqPktCntExceeded | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.19 | Unsigned32 | read-only | This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count. |
| U32 mscTraceSessionFrVcPeakOoSeqByteCount | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.12.1.20 | Unsigned32 | read-only | This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc. |
| mscTraceSessionFrVcDmepTable | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.417 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint. | |
| mscTraceSessionFrVcDmepEntry | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.417.1 | not-accessible | An entry in the mscTraceSessionFrVcDmepTable. | |
| NUM mscTraceSessionFrVcDmepValue | 1.3.6.1.4.1.562.36.2.1.106.3.3.2.417.1.1 | RowPointer | read-only | This variable represents both the value and the index for the mscTraceSessionFrVcDmepTable. |
| frTraceRcvrMIB | 1.3.6.1.4.1.562.36.2.2.139 | |||
| frTraceRcvrGroup | 1.3.6.1.4.1.562.36.2.2.139.1 | |||
| frTraceRcvrGroupCA | 1.3.6.1.4.1.562.36.2.2.139.1.1 | |||
| frTraceRcvrGroupCA02 | 1.3.6.1.4.1.562.36.2.2.139.1.1.3 | |||
| frTraceRcvrGroupCA02A | 1.3.6.1.4.1.562.36.2.2.139.1.1.3.2 | |||
| frTraceRcvrCapabilities | 1.3.6.1.4.1.562.36.2.2.139.3 | |||
| frTraceRcvrCapabilitiesCA | 1.3.6.1.4.1.562.36.2.2.139.3.1 | |||
| frTraceRcvrCapabilitiesCA02 | 1.3.6.1.4.1.562.36.2.2.139.3.1.3 | |||
| frTraceRcvrCapabilitiesCA02A | 1.3.6.1.4.1.562.36.2.2.139.3.1.3.2 |
RFC description
Manages Frame Relay trace receiver components for Nortel MsCarrier MscPassport network trace data collection.
Start monitoring Nortel MainStreet Carrier / Passport (MscPassport) multiservice switch (Frame Relay trace receiver) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.