Nortel-Magellan-Passport-TdmaIwfMIB

All MIBs › Nortel-Magellan-Passport-TdmaIwfMIB

Category: Circuit Emulation / TDM, Nortel Magellan Passport

Description: Provides SNMP objects for TDMA interworking function configuration and status on Nortel Magellan Passport mobile carrier interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-Magellan-Passport-TdmaIwfMIB?

Nortel-Magellan-Passport-TdmaIwfMIB is a Nortel Networks MIB for the Magellan Passport wide-area switching platform, providing SNMP-managed objects for configuring and monitoring the TDMA (Time Division Multiple Access) Interworking Function used to interconnect TDMA mobile carrier signaling with the Passport's packet/cell switching fabric. It exposes row-status-controlled configuration tables for TDMA connection service (CS) components, including component naming, storage type, service-provisioning parameters, and TDMA-specific timers (such as T303) used in call/connection setup. Its monitoring value lies in connection/service provisioning status: the row status objects reveal whether a TDMA interworking connection or service-provider entry is active, being created, or has failed to provision, which is central to diagnosing mobile-carrier interconnection problems on the Passport platform. As a component MIB within the broader Magellan Passport architecture, it relies on the platform's shared component-naming and row-status conventions used across other Passport MIBs. It is typically deployed on Nortel Magellan Passport wide-area switches used by mobile carriers for TDMA-based interworking in legacy cellular backhaul networks. Engineers can download the Nortel-Magellan-Passport-TdmaIwfMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-TdmaIwfMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Magellan Passport wide-area switching platform (mobile carrier TDMA interworking)

Monitoring Examples

An operator would poll tdmaCsRowStatusTable/tdmaCsRowStatusEntry to check tdmaCsRowStatus and tdmaCsComponentName for each TDMA CS component, confirming entries are active rather than stuck in notReady. Checking tdmaCsServProvTable/tdmaCsServProvEntry values like tdmaCsTIwf1, tdmaCsTIwf2, and tdmaCsT303 would reveal misconfigured interworking timers, which could explain repeated call setup failures or timeouts on the TDMA interworking link.

What Can Be Monitored

TDMA CS component row status
component naming and storage type
interworking timer configuration (e.g., T303)
service provider table entries

Imported Objects

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

Counter32
DisplayString
Gauge32
Integer32
RowPointer
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

AsciiString
FixedPoint2
Link
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

components	OBJECT-IDENTITY
passportMIBs	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
tdmaCs	1.3.6.1.4.1.562.2.4.1.135
tdmaCsRowStatusTable	1.3.6.1.4.1.562.2.4.1.135.1		not-accessible	This entry controls the addition and deletion of tdmaCs components.
tdmaCsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.1.1		not-accessible	A single entry in the table represents a single tdmaCs component.
ROW tdmaCsRowStatus	1.3.6.1.4.1.562.2.4.1.135.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of tdmaCs components. These components can be added and deleted.
STR tdmaCsComponentName	1.3.6.1.4.1.562.2.4.1.135.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsStorageType	1.3.6.1.4.1.562.2.4.1.135.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCs tables.
I32 tdmaCsCsIndex	1.3.6.1.4.1.562.2.4.1.135.1.1.10	Integer32	not-accessible	This variable represents the index for the tdmaCs tables.
tdmaCsModem	1.3.6.1.4.1.562.2.4.1.135.2
tdmaCsModemRowStatusTable	1.3.6.1.4.1.562.2.4.1.135.2.1		not-accessible	This entry controls the addition and deletion of tdmaCsModem components.
tdmaCsModemRowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.2.1.1		not-accessible	A single entry in the table represents a single tdmaCsModem component.
ROW tdmaCsModemRowStatus	1.3.6.1.4.1.562.2.4.1.135.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaCsModem components. These components cannot be added nor deleted.
STR tdmaCsModemComponentName	1.3.6.1.4.1.562.2.4.1.135.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsModemStorageType	1.3.6.1.4.1.562.2.4.1.135.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsModem tables.
NON tdmaCsModemIndex	1.3.6.1.4.1.562.2.4.1.135.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaCsModem tables.
tdmaCsFax	1.3.6.1.4.1.562.2.4.1.135.3
tdmaCsFaxRowStatusTable	1.3.6.1.4.1.562.2.4.1.135.3.1		not-accessible	This entry controls the addition and deletion of tdmaCsFax components.
tdmaCsFaxRowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.3.1.1		not-accessible	A single entry in the table represents a single tdmaCsFax component.
ROW tdmaCsFaxRowStatus	1.3.6.1.4.1.562.2.4.1.135.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaCsFax components. These components cannot be added nor deleted.
STR tdmaCsFaxComponentName	1.3.6.1.4.1.562.2.4.1.135.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsFaxStorageType	1.3.6.1.4.1.562.2.4.1.135.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsFax tables.
NON tdmaCsFaxIndex	1.3.6.1.4.1.562.2.4.1.135.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaCsFax tables.
tdmaCsDce	1.3.6.1.4.1.562.2.4.1.135.4
tdmaCsDceRowStatusTable	1.3.6.1.4.1.562.2.4.1.135.4.1		not-accessible	This entry controls the addition and deletion of tdmaCsDce components.
tdmaCsDceRowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.4.1.1		not-accessible	A single entry in the table represents a single tdmaCsDce component.
ROW tdmaCsDceRowStatus	1.3.6.1.4.1.562.2.4.1.135.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaCsDce components. These components cannot be added nor deleted.
STR tdmaCsDceComponentName	1.3.6.1.4.1.562.2.4.1.135.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsDceStorageType	1.3.6.1.4.1.562.2.4.1.135.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsDce tables.
NON tdmaCsDceIndex	1.3.6.1.4.1.562.2.4.1.135.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaCsDce tables.
tdmaCsDsc	1.3.6.1.4.1.562.2.4.1.135.5
tdmaCsDscRowStatusTable	1.3.6.1.4.1.562.2.4.1.135.5.1		not-accessible	This entry controls the addition and deletion of tdmaCsDsc components.
tdmaCsDscRowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.5.1.1		not-accessible	A single entry in the table represents a single tdmaCsDsc component.
ROW tdmaCsDscRowStatus	1.3.6.1.4.1.562.2.4.1.135.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaCsDsc components. These components cannot be added nor deleted.
STR tdmaCsDscComponentName	1.3.6.1.4.1.562.2.4.1.135.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsDscStorageType	1.3.6.1.4.1.562.2.4.1.135.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsDsc tables.
NON tdmaCsDscIndex	1.3.6.1.4.1.562.2.4.1.135.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaCsDsc tables.
tdmaCsDscProvTable	1.3.6.1.4.1.562.2.4.1.135.5.10		not-accessible	This group contains the provisionable attributes for Data Service Control Asynchronous Data Service portion of the wireless protocol stack used for the calls set up by this particular TdmaIwfCallServer.
tdmaCsDscProvEntry	1.3.6.1.4.1.562.2.4.1.135.5.10.1		not-accessible	An entry in the tdmaCsDscProvTable.
U32 tdmaCsDscLl0BufferSize	1.3.6.1.4.1.562.2.4.1.135.5.10.1.1	Unsigned32	read-write	This attribute specifies the maximum size of the DSC logical link 0 control buffer. Changes impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger buffer size may be offset by less memory being available. The customer might wish to increase the buffer size when a degradation in throughput of the system is seen.
U32 tdmaCsDscLl1BufferSize	1.3.6.1.4.1.562.2.4.1.135.5.10.1.2	Unsigned32	read-write	This attribute specifies the maximum size of the DSC logical link 1 data buffer. Changes impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger buffer size may be offset by less memory being available. The customer might wish to increase the buffer size when a degradation in throughput of the system is seen.
U32 tdmaCsDscK0Ll0WindowSize	1.3.6.1.4.1.562.2.4.1.135.5.10.1.3	Unsigned32	read-write	This attribute specifies the maximum size of the DSC logical link 0 window.
U32 tdmaCsDscK1Ll1WindowSize	1.3.6.1.4.1.562.2.4.1.135.5.10.1.4	Unsigned32	read-write	This attribute specifies the maximum size of the DSC logical link 1 window.
INT tdmaCsDscP0CompressionDirection	1.3.6.1.4.1.562.2.4.1.135.5.10.1.5	INTEGER	read-write	This attribute specifies the compression configuration for DSC. This attribute has one of the following values: noCompression: No compression. compInitrResp: Compression initiator to responder. compRespInitr: Compression responder to initiator. compBoth: Compression both directions.
U32 tdmaCsDscP1CompressionMaximumCodewords	1.3.6.1.4.1.562.2.4.1.135.5.10.1.6	Unsigned32	read-write	This attribute specifies the maximum number of codewords to be used for compression. A codeword is a binary number that represents a string of characters. Changes to this attribute impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger dictionary may be offset by the larger codeword size needed, and for certain types of data, better performance may be obtained by using a smaller dictionary. Changes to this attribute do not affect existing calls.
U32 tdmaCsDscP2CompressionMaximumCharacters	1.3.6.1.4.1.562.2.4.1.135.5.10.1.7	Unsigned32	read-write	This attribute specifies the maximum number of characters that can be represented by a single codeword to be used for compression from logical link 0.
tdmaCsRlp1	1.3.6.1.4.1.562.2.4.1.135.6
tdmaCsRlp1RowStatusTable	1.3.6.1.4.1.562.2.4.1.135.6.1		not-accessible	This entry controls the addition and deletion of tdmaCsRlp1 components.
tdmaCsRlp1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.6.1.1		not-accessible	A single entry in the table represents a single tdmaCsRlp1 component.
ROW tdmaCsRlp1RowStatus	1.3.6.1.4.1.562.2.4.1.135.6.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of tdmaCsRlp1 components. These components can be added.
STR tdmaCsRlp1ComponentName	1.3.6.1.4.1.562.2.4.1.135.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsRlp1StorageType	1.3.6.1.4.1.562.2.4.1.135.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsRlp1 tables.
INT tdmaCsRlp1Index	1.3.6.1.4.1.562.2.4.1.135.6.1.1.10	INTEGER	not-accessible	This variable represents the index for the tdmaCsRlp1 tables.
tdmaCsRlp1ProvTable	1.3.6.1.4.1.562.2.4.1.135.6.10		not-accessible	This group contains provisionable attributes for the Radio Link Protocol 1 (RLP1) parameters used for the calls set up by this particular TdmaIwfCallServer. Changes to these attributes do not affect existing calls.
tdmaCsRlp1ProvEntry	1.3.6.1.4.1.562.2.4.1.135.6.10.1		not-accessible	An entry in the tdmaCsRlp1ProvTable.
U32 tdmaCsRlp1T1ResponseTimer	1.3.6.1.4.1.562.2.4.1.135.6.10.1.1	Unsigned32	read-write	This attribute specifies the time the receiving Radio Link Protocol (RLP1) entity shall wait for a response from the peer TIA-136-310 (formerly IS-130) application. During the Exchange Information (XID) negotiation, both RLP1 entities (mobile station and IWF) can agree to use a specific value for this timer (T1). The IWF attempts to negotiate to the value specified by this attribute. Changes to this attribute do not affect existing calls.
U32 tdmaCsRlp1T2LinkActivityTimer	1.3.6.1.4.1.562.2.4.1.135.6.10.1.2	Unsigned32	read-write	This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for link activity. During the Exchange Information (XID) negotiation, both RLP1 entities (mobile station and IWF) can agree to use a specific value for this timer (T2). The IWF attempts to negotiate to the value specified by this attribute. Changes to this attribute do not affect existing calls.
U32 tdmaCsRlp1T3PeerAckTimer	1.3.6.1.4.1.562.2.4.1.135.6.10.1.3	Unsigned32	read-write	This attribute specifies the maximum time the receiving Radio Link Protocol (RLP1) entity shall wait for the peer to ACK or NAK data. During the Exchange Information (XID) negotiation, both RLP1 entities (mobile station and IWF) can agree to use a specific value for this timer (T3). The IWF attempts to negotiate to the value specified by this attribute. Changes to this attribute do not affect existing calls.
tdmaCsV42	1.3.6.1.4.1.562.2.4.1.135.7
tdmaCsV42RowStatusTable	1.3.6.1.4.1.562.2.4.1.135.7.1		not-accessible	This entry controls the addition and deletion of tdmaCsV42 components.
tdmaCsV42RowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.7.1.1		not-accessible	A single entry in the table represents a single tdmaCsV42 component.
ROW tdmaCsV42RowStatus	1.3.6.1.4.1.562.2.4.1.135.7.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaCsV42 components. These components cannot be added nor deleted.
STR tdmaCsV42ComponentName	1.3.6.1.4.1.562.2.4.1.135.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsV42StorageType	1.3.6.1.4.1.562.2.4.1.135.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsV42 tables.
NON tdmaCsV42Index	1.3.6.1.4.1.562.2.4.1.135.7.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaCsV42 tables.
tdmaCsV42ProvTable	1.3.6.1.4.1.562.2.4.1.135.7.10		not-accessible	This group contains the provisionable attributes for the V.42 protocol used for the calls set up by this particular IwfCallServer. Changes to these attributes do not affect existing calls.
tdmaCsV42ProvEntry	1.3.6.1.4.1.562.2.4.1.135.7.10.1		not-accessible	An entry in the tdmaCsV42ProvTable.
NUM tdmaCsV42T400DetectTimer	1.3.6.1.4.1.562.2.4.1.135.7.10.1.1	FixedPoint2	read-write	This attribute specifies the maximum amount of time that the IWF waits for an Originator Detection Pattern (ODP) or Answerer Detection Pattern (ADP). ODP/ADP is a series of special bit patterns used during the call setup procedures. If the IWF is the originator of the call, it starts sending ODP patterns and waits for an ADP for the duration of T400 from the answerer at call setup time. If the IWF is the answerer of the call, it waits for an ODP for T400 seconds from the originator and if it receives during that time it sends an ADP pattern to the originator at the call setup time. Since both sides operate with different values of T400 timer, a higher value increases the chance of a successful call setup. Changes to this attribute do not affect existing calls.
NUM tdmaCsV42T401AckTimer	1.3.6.1.4.1.562.2.4.1.135.7.10.1.2	FixedPoint2	read-write	This attribute specifies the maximum amount of time that the IWF waits for an acknowledgment before retransmitting a frame. Since information about the T401 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. The value for T401 depends on many factors, such as propagation delay or frame processing time. A frame is retransmitted up to N400 times if the timer T401 expires before an acknowledgment for a frame is actually received. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. Changes to this attribute do not affect existing calls.
NUM tdmaCsV42T402AckDelayTimer	1.3.6.1.4.1.562.2.4.1.135.7.10.1.3	FixedPoint2	read-write	This attribute specifies the maximum amount of time that the IWF may wait following the receipt of any frame requiring a reply before it initiates transmission of an appropriate reply in order to ensure that the reply frame is received by the remote error-correcting entity prior to expiration of the T401 timer of the remote error-correcting entity. Since information about the T402 timer is not carried in the Exchange Identification (XID) negotiations at call setup, both sides operate with different timer values. If this timer expires, then the reply that would have been returned prior to its expiration is not sent. The performance of the data link layer can be impacted by the value of this timer as retransmissions of frames occur on expiry of timer T401. For better performance, a value of t402AckDelayTimer (T402) equal to half the value of t401AckTimer (T401) is recommended. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42T403IdleProbeTimer	1.3.6.1.4.1.562.2.4.1.135.7.10.1.4	Unsigned32	read-write	This attribute specifies the maximum amount of time that the IWF allows to elapse without frames being exchanged. The link is permitted to remain idle with no frames being exchanged on the data link. Upon expiry of this timer, the IWF polls its peer for status. Since information about the T403 timer is not carried in the Exchange Identification (XID) negotiations at call setup time, both sides operate with different timer values. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42TxN401FrameSize	1.3.6.1.4.1.562.2.4.1.135.7.10.1.5	Unsigned32	read-write	This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the IWF to the remote entity. The default value is 128 octets, and no XID negotiations required for txN401FrameSize. If the value for txN401FrameSize value is set to other than 128 octets, then XID frames are exchanged to negotiate a value. The value provided for txN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF negotiates or attempts to negotiate a value between the 128 (as a minimum) and the given value (as a maximum). If a value less than 128 is specified, then the IWF attempts to negotiate a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to 128 is recommended. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42RxN401FrameSize	1.3.6.1.4.1.562.2.4.1.135.7.10.1.6	Unsigned32	read-write	This attribute specifies the maximum number of octets that can be carried in the information field of an Information (I) frame, Exchange Identification (XID) frame, and a Unnumbered Information (UI) frame from the remote entity to the IWF. The default value is 128 octets, and no XID negotiations are required for rxN401FrameSize. If the value set for rxN401FrameSize is other than 128, XID frames are exchanged to negotiate a value. The value provided for rxN401FrameSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 128 is specified, then the IWF attempts to negotiate for a value between 128 (as a minimum) and the given value (as a maximum). If a value less than 128 value is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 128 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42TxKWindowSize	1.3.6.1.4.1.562.2.4.1.135.7.10.1.7	Unsigned32	read-write	This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the IWF to the remote entity. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for txKWindowSize. If the value set for txKWindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for txKWindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long at it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42RxKWindowSize	1.3.6.1.4.1.562.2.4.1.135.7.10.1.8	Unsigned32	read-write	This attribute specifies the maximum number of outstanding unacknowledged sequenced Information (I) frames from the remote entity to the IWF. The default value is 15 frames, and if this value is used then no Exchange Identification (XID) negotiations are required for rxKWindowSize. If the value set for rxKWindowSize is other than 15, then XID frames are exchanged to negotiate a value. The value provided for rxKWindowSize sets up the bounds during XID negotiations. The IWF performs XID negotiations with this value as a minimum or maximum value. If a value greater than 15 is specified, then the IWF attempts to negotiate a value between 15 (as a minimum) and the given value (as a maximum). If a value less than 15 is specified, then the IWF attempts to negotiate for a value between the given value (as a minimum) and 15 (as a maximum). Any value can be specified as long as it is within the provisionable limits. However, a value equal to or close to the default is recommended. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42N400RetransLimit	1.3.6.1.4.1.562.2.4.1.135.7.10.1.9	Unsigned32	read-write	This attribute specifies the maximum number of times the IWF retransmits a frame upon expiry of t401AckTimer before appropriate recovery action is taken. Information about N400 (Retransmission Limit) is not carried in the Exchange Identification (XID) negotiation at call setup time so both sides operate with different N400 values. Changes to this attribute do not affect existing calls.
INT tdmaCsV42FcsLength	1.3.6.1.4.1.562.2.4.1.135.7.10.1.10	INTEGER	read-write	This attribute specifies whether a 16 bit or a 32 bit Frame Check Sequence (FCS) will be used for the link between the IWF and the far end DCE. This attribute has one of the following values: fcs16: Use only a 16 bit FCS. fcs32Or16: 32 bit FCS is preferred; Use a 16 bit FCS if needed. fcs32Only: Use only a 32 it FCS; If unavailable, drop the connection.
tdmaCsV42Bis	1.3.6.1.4.1.562.2.4.1.135.8
tdmaCsV42BisRowStatusTable	1.3.6.1.4.1.562.2.4.1.135.8.1		not-accessible	This entry controls the addition and deletion of tdmaCsV42Bis components.
tdmaCsV42BisRowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.8.1.1		not-accessible	A single entry in the table represents a single tdmaCsV42Bis component.
ROW tdmaCsV42BisRowStatus	1.3.6.1.4.1.562.2.4.1.135.8.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaCsV42Bis components. These components cannot be added nor deleted.
STR tdmaCsV42BisComponentName	1.3.6.1.4.1.562.2.4.1.135.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsV42BisStorageType	1.3.6.1.4.1.562.2.4.1.135.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsV42Bis tables.
NON tdmaCsV42BisIndex	1.3.6.1.4.1.562.2.4.1.135.8.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaCsV42Bis tables.
tdmaCsV42BisProvTable	1.3.6.1.4.1.562.2.4.1.135.8.10		not-accessible	This group contains the provisionable attributes for the V.42bis data compression protocol parameters used for the calls set up by this particular CallServer. Changes to these attributes do not affect existing calls.
tdmaCsV42BisProvEntry	1.3.6.1.4.1.562.2.4.1.135.8.10.1		not-accessible	An entry in the tdmaCsV42BisProvTable.
INT tdmaCsV42BisP0CompressionDirection	1.3.6.1.4.1.562.2.4.1.135.8.10.1.1	INTEGER	read-write	This attribute specifies the V.42bis data compression direction to be supported. The value for compression direction is negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P0 (compression direction). During XID negotiation of parameter P0, both sides (IWF and mobile or IWF and PSTN) agree on the compression direction. This attribute has one of the following values: noCompression: No compression is present. compInitrResp: The data sent by the IWF to the other entity is compressed. compRespInitr: The data received by the IWF from the other entity is compressed. compBoth: The data sent and received by the IWF is compressed. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42BisP1MaximumCodewords	1.3.6.1.4.1.562.2.4.1.135.8.10.1.2	Unsigned32	read-write	This attribute specifies the maximum number of V.42bis codewords the IWF supports. A codeword is a binary number that represents a string of characters in compressed form. V.42bis keeps a dictionary of codewords for each compression direction. Changes to this attribute impact the compression ratio for the encoder (component TdmaBc V42Bis attribute compRatioEncoder). Changes also impact the amount of memory used (more memory is used when increasing the attribute). The gain in performance obtained from the selection of a larger dictionary may be offset by the larger codeword size needed, and for certain types of data, better performance may be obtained by using a smaller dictionary. Changes to this attribute do not affect existing calls.
U32 tdmaCsV42BisP2MaximumStringSize	1.3.6.1.4.1.562.2.4.1.135.8.10.1.3	Unsigned32	read-write	This attribute specifies the maximum number of characters allowed in a string represented by a codeword that the IWF supports. Each codeword in a V.42bis dictionary represents a string of characters. Changes to this attribute impact the compression ratio for the encoder. Changes to this attribute do not affect existing calls.
INT tdmaCsV42BisActionOnError	1.3.6.1.4.1.562.2.4.1.135.8.10.1.4	INTEGER	read-write	This attribute specifies whether or not V.42bis takes down the call or resets the link when any of the following errors occur: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. If the value is resetLink, the error corrected connection and V.42bis dictionaries are reset. Some data is lost but the call continues. If the value is takeDownCall, the call is taken down. Changes to this attribute do not affect existing calls.
tdmaCsLp	1.3.6.1.4.1.562.2.4.1.135.9
tdmaCsLpRowStatusTable	1.3.6.1.4.1.562.2.4.1.135.9.1		not-accessible	This entry controls the addition and deletion of tdmaCsLp components.
tdmaCsLpRowStatusEntry	1.3.6.1.4.1.562.2.4.1.135.9.1.1		not-accessible	A single entry in the table represents a single tdmaCsLp component.
ROW tdmaCsLpRowStatus	1.3.6.1.4.1.562.2.4.1.135.9.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of tdmaCsLp components. These components can be added and deleted.
STR tdmaCsLpComponentName	1.3.6.1.4.1.562.2.4.1.135.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaCsLpStorageType	1.3.6.1.4.1.562.2.4.1.135.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaCsLp tables.
I32 tdmaCsLpIndex	1.3.6.1.4.1.562.2.4.1.135.9.1.1.10	Integer32	not-accessible	This variable represents the index for the tdmaCsLp tables.
tdmaCsLpOperTable	1.3.6.1.4.1.562.2.4.1.135.9.10		not-accessible	This group contains operational attributes pertaining to information about TdmaIwfBearerChannels and TdmaIwfLogicalProcessor associated with a TdmaIwfCallServer from a high-level view.
tdmaCsLpOperEntry	1.3.6.1.4.1.562.2.4.1.135.9.10.1		not-accessible	An entry in the tdmaCsLpOperTable.
U32 tdmaCsLpConfiguredBearerChannels	1.3.6.1.4.1.562.2.4.1.135.9.10.1.1	Unsigned32	read-only	This attribute indicates the number of TdmaIwfBearerChannel components provisioned for the TdmaIwfLogicalProcessor represented by this component.
G32 tdmaCsLpActiveCalls	1.3.6.1.4.1.562.2.4.1.135.9.10.1.2	Gauge32	read-only	This attribute indicates the number of calls currently active on this LogicalProcessor.
INT tdmaCsLpModemsSupported	1.3.6.1.4.1.562.2.4.1.135.9.10.1.3	INTEGER	read-only	This attribute indicates if modems are supported with this TdmaIwfLogicalProcessor. This attribute has one of the following values: yes: Modems are supported with this TdmaIwfLogicalProcessor. no: Modems are not supported with this TdmaIwfLogicalProcessor.
tdmaCsServProvTable	1.3.6.1.4.1.562.2.4.1.135.100		not-accessible	This group contains all the necessary timers for call setup and call clearing scenarios on the IWF.
tdmaCsServProvEntry	1.3.6.1.4.1.562.2.4.1.135.100.1		not-accessible	An entry in the tdmaCsServProvTable.
U32 tdmaCsTIwf1	1.3.6.1.4.1.562.2.4.1.135.100.1.1	Unsigned32	read-write	This is an internal timer to the call server of the IWF and is used during call setup for ensuring the MIT protocol stack and the NIT modem for a new call have been allocated and initialized.
U32 tdmaCsTIwf2	1.3.6.1.4.1.562.2.4.1.135.100.1.2	Unsigned32	read-write	This is an internal timer to the call server of the IWF and is used during call clearing for ensuring the MIT protocol stack and NIT modem for a call have been deallocated correctly.
U32 tdmaCsT303	1.3.6.1.4.1.562.2.4.1.135.100.1.3	Unsigned32	read-write	This timer is a call setup timer and is used for ensuring a CallProceeding message is received for a Setup message that has been sent by the IWF to the MTX.
U32 tdmaCsT305	1.3.6.1.4.1.562.2.4.1.135.100.1.4	Unsigned32	read-write	This timer is a call clearing timer and is used for ensuring a Release message is received for a Disconnect message the IWF has sent to the MTX.
U32 tdmaCsT308	1.3.6.1.4.1.562.2.4.1.135.100.1.5	Unsigned32	read-write	This timer is a call clearing timer and is used for ensuring a ReleaseComplete message is received for the Release message the IWF has sent to the MTX.
U32 tdmaCsT313	1.3.6.1.4.1.562.2.4.1.135.100.1.6	Unsigned32	read-write	This is a call setup timer and is used for ensuring a ConnectAck message is received in response for the Connect message the IWF has sent to the MTX.
U32 tdmaCsT999	1.3.6.1.4.1.562.2.4.1.135.100.1.7	Unsigned32	read-write	This timer is used during a mobile termination call setup and is used for ensuring the Setup message is received from the MTX.
INT tdmaCsSupportedTechnology	1.3.6.1.4.1.562.2.4.1.135.100.1.8	INTEGER	read-write	This attribute specifies the wireless technology that is supported for data calls on this IWF.
INT tdmaCsSupportedService	1.3.6.1.4.1.562.2.4.1.135.100.1.9	INTEGER	read-write	This attribute specifies the type(s) of data calls this IWF supports.
tdmaCsMiscProvTable	1.3.6.1.4.1.562.2.4.1.135.101		not-accessible	This group contains general provisioning data for the TdmaIwfCallServer that does not fit within other provisioning groups.
tdmaCsMiscProvEntry	1.3.6.1.4.1.562.2.4.1.135.101.1		not-accessible	An entry in the tdmaCsMiscProvTable.
STR tdmaCsCommentText	1.3.6.1.4.1.562.2.4.1.135.101.1.1	AsciiString	read-write	Use of this attribute is at the discretion of the system administrator. Typically, this attribute is used to specify the name of the DMS- MTX configured for this TdmaIwfCallServer plus any other commentary information.
IP tdmaCsMscIpAddress	1.3.6.1.4.1.562.2.4.1.135.101.1.2	IpAddress	read-write	This attribute specifies the Internet Protocol (IP) Address of the Mobile Telephone Exchange (MTX) that is permitted to set up MTX InterWorking Function (IWF) data calls using this TdmaIwfCallServer. This address must be specified in order for this TdmaIwfCallServer to provide service. If call setups are attempted from an MSC which does not have this address, those calls are rejected. The callsRequested statistic of this TdmaIwfCallServer is incremented and appropriate call failure logs are generated at the MSC.
NUM tdmaCsVirtualRouterName	1.3.6.1.4.1.562.2.4.1.135.101.1.3	RowPointer	read-write	This attribute specifies the virtual router that this TdmaIwfCallServer uses for transmitting and receiving signaling messages to and from the DMS-MTX.
INT tdmaCsVoiceLaw	1.3.6.1.4.1.562.2.4.1.135.101.1.4	INTEGER	read-write	This attribute specifies the voice law to be established for the IWF to PSTN modem link for calls established by this TdmaIwfCallServer. This attribute has one of the following values: aLaw: A protocol for encoding voice-band audio, Pulse Code Modulation (PCM). muLaw: A protocol for encoding voice-band audio, PCM. Note that this value must match the voice law used at the DMS- MTX connected to this TdmaIwfCallServer.
tdmaCsCidDataTable	1.3.6.1.4.1.562.2.4.1.135.103		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
tdmaCsCidDataEntry	1.3.6.1.4.1.562.2.4.1.135.103.1		not-accessible	An entry in the tdmaCsCidDataTable.
U32 tdmaCsCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.135.103.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
tdmaCsStateTable	1.3.6.1.4.1.562.2.4.1.135.104		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
tdmaCsStateEntry	1.3.6.1.4.1.562.2.4.1.135.104.1		not-accessible	An entry in the tdmaCsStateTable.
INT tdmaCsAdminState	1.3.6.1.4.1.562.2.4.1.135.104.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT tdmaCsOperationalState	1.3.6.1.4.1.562.2.4.1.135.104.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT tdmaCsUsageState	1.3.6.1.4.1.562.2.4.1.135.104.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
tdmaCsStatsTable	1.3.6.1.4.1.562.2.4.1.135.121		not-accessible	This group contains operational attributes that measure the performance used for the calls set up by this particular TdmaIwfCallServer.
tdmaCsStatsEntry	1.3.6.1.4.1.562.2.4.1.135.121.1		not-accessible	An entry in the tdmaCsStatsTable.
G32 tdmaCsCurrentCalls	1.3.6.1.4.1.562.2.4.1.135.121.1.1	Gauge32	read-only	This attribute indicates the number of active calls currently serviced by this particular TdmaIwfCallServer.
C32 tdmaCsCallsRequested	1.3.6.1.4.1.562.2.4.1.135.121.1.2	Counter32	read-only	This attribute counts the number of IWF call setup requests received at this particular TdmaIwfCallServer from the DMS-MTX. The counter wraps when it exceeds the maximum value.
C32 tdmaCsCallsSetUp	1.3.6.1.4.1.562.2.4.1.135.121.1.3	Counter32	read-only	This attribute counts the number of IWF calls successfully setup by this particular TdmaIwfCallServer. A call is considered setup when the IWF-Setup-Request message is received, indicating a request for a data communications service, and the IWF has successfully allocated the necessary resources to fulfill the request. The counter wraps when it exceeds the maximum value.
C32 tdmaCsCallsReleasedNormal	1.3.6.1.4.1.562.2.4.1.135.121.1.4	Counter32	read-only	This attribute counts the number of IWF calls that have completed successfully on this particular TdmaIwfCallServer. The counter wraps when it exceeds the maximum value.
C32 tdmaCsCallsReleasedAbnormal	1.3.6.1.4.1.562.2.4.1.135.121.1.5	Counter32	read-only	This attribute counts the number of IWF calls that have been released due to error conditions at this particular TdmaIwfCallServer or one if its TdmaIwfBearerChannel(s). The counter wraps when it exceeds the maximum value.
C32 tdmaCsErroredLFrames	1.3.6.1.4.1.562.2.4.1.135.121.1.6	Counter32	read-only	This attribute counts the number of CM/IWF Control Interface (CCI) messages received from the DMS-MTX that have an incorrect format. The counter wraps when it exceeds the maximum value.
tdmaBc	1.3.6.1.4.1.562.2.4.1.136
tdmaBcRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.1		not-accessible	This entry controls the addition and deletion of tdmaBc components.
tdmaBcRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.1.1		not-accessible	A single entry in the table represents a single tdmaBc component.
ROW tdmaBcRowStatus	1.3.6.1.4.1.562.2.4.1.136.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of tdmaBc components. These components can be added and deleted.
STR tdmaBcComponentName	1.3.6.1.4.1.562.2.4.1.136.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcStorageType	1.3.6.1.4.1.562.2.4.1.136.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBc tables.
I32 tdmaBcCsIndex	1.3.6.1.4.1.562.2.4.1.136.1.1.10	Integer32	not-accessible	This variable represents an index for the tdmaBc tables.
I32 tdmaBcBcIndex	1.3.6.1.4.1.562.2.4.1.136.1.1.11	Integer32	not-accessible	This variable represents an index for the tdmaBc tables.
tdmaBcFramer	1.3.6.1.4.1.562.2.4.1.136.2
tdmaBcFramerRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.2.1		not-accessible	This entry controls the addition and deletion of tdmaBcFramer components.
tdmaBcFramerRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.2.1.1		not-accessible	A single entry in the table represents a single tdmaBcFramer component.
ROW tdmaBcFramerRowStatus	1.3.6.1.4.1.562.2.4.1.136.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcFramer components. These components cannot be added nor deleted.
STR tdmaBcFramerComponentName	1.3.6.1.4.1.562.2.4.1.136.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcFramerStorageType	1.3.6.1.4.1.562.2.4.1.136.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcFramer tables.
NON tdmaBcFramerIndex	1.3.6.1.4.1.562.2.4.1.136.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcFramer tables.
tdmaBcFramerProvTable	1.3.6.1.4.1.562.2.4.1.136.2.10		not-accessible	This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
tdmaBcFramerProvEntry	1.3.6.1.4.1.562.2.4.1.136.2.10.1		not-accessible	An entry in the tdmaBcFramerProvTable.
LIN tdmaBcFramerInterfaceName	1.3.6.1.4.1.562.2.4.1.136.2.10.1.1	Link	read-write	This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
tdmaBcFramerStatsTable	1.3.6.1.4.1.562.2.4.1.136.2.11		not-accessible	This group contains the operational statistics data for a TdmaIwfFramer component.
tdmaBcFramerStatsEntry	1.3.6.1.4.1.562.2.4.1.136.2.11.1		not-accessible	An entry in the tdmaBcFramerStatsTable.
C32 tdmaBcFramerTxFrames	1.3.6.1.4.1.562.2.4.1.136.2.11.1.1	Counter32	read-only	This attribute counts the number of frames transmitted to the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value.
C32 tdmaBcFramerRxFrames	1.3.6.1.4.1.562.2.4.1.136.2.11.1.2	Counter32	read-only	This attribute counts the number of frames received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value.
C32 tdmaBcFramerRxBytes	1.3.6.1.4.1.562.2.4.1.136.2.11.1.3	Counter32	read-only	This attribute counts the number of bytes received from the link interface by TdmaIwfFramer. The counter wraps when it exceeds the maximum value.
tdmaBcFramerLinkTable	1.3.6.1.4.1.562.2.4.1.136.2.12		not-accessible	This group contains provisionable attributes for the TdmaIwfFramer which controls link layer framing for application components sending and receiving data on a link interface for this particular TdmaIwfBearerChannel.
tdmaBcFramerLinkEntry	1.3.6.1.4.1.562.2.4.1.136.2.12.1		not-accessible	An entry in the tdmaBcFramerLinkTable.
INT tdmaBcFramerFramingType	1.3.6.1.4.1.562.2.4.1.136.2.12.1.1	INTEGER	read-write	This attribute indicates the type of framing for the link layer data received and transmitted on this channel. This attribute has one of the following values: btdsFraming: Bit transparent framing for the TdmaIwfBearerChannel components on MVP cards. mtxFraming: DMS-MTX InterSystem Link Protocol (ISLP) framing required for the TdmaIwfBearerChannel components on DS1C/E1C cards.
tdmaBcFramerStateTable	1.3.6.1.4.1.562.2.4.1.136.2.13		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
tdmaBcFramerStateEntry	1.3.6.1.4.1.562.2.4.1.136.2.13.1		not-accessible	An entry in the tdmaBcFramerStateTable.
INT tdmaBcFramerAdminState	1.3.6.1.4.1.562.2.4.1.136.2.13.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT tdmaBcFramerOperationalState	1.3.6.1.4.1.562.2.4.1.136.2.13.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT tdmaBcFramerUsageState	1.3.6.1.4.1.562.2.4.1.136.2.13.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
tdmaBcModem	1.3.6.1.4.1.562.2.4.1.136.3
tdmaBcModemRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.3.1		not-accessible	This entry controls the addition and deletion of tdmaBcModem components.
tdmaBcModemRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.3.1.1		not-accessible	A single entry in the table represents a single tdmaBcModem component.
ROW tdmaBcModemRowStatus	1.3.6.1.4.1.562.2.4.1.136.3.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcModem components. These components cannot be added nor deleted.
STR tdmaBcModemComponentName	1.3.6.1.4.1.562.2.4.1.136.3.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcModemStorageType	1.3.6.1.4.1.562.2.4.1.136.3.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcModem tables.
NON tdmaBcModemIndex	1.3.6.1.4.1.562.2.4.1.136.3.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcModem tables.
tdmaBcModemOperTable	1.3.6.1.4.1.562.2.4.1.136.3.10		not-accessible	This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel.
tdmaBcModemOperEntry	1.3.6.1.4.1.562.2.4.1.136.3.10.1		not-accessible	An entry in the tdmaBcModemOperTable.
INT tdmaBcModemVoiceLaw	1.3.6.1.4.1.562.2.4.1.136.3.10.1.1	INTEGER	read-only	This attribute indicates the active voice law associated with the modem component. This attribute has one of the following values: aLaw and muLaw. Both protocols are utilized for encoding voice- band audio. For additional information on each, refer to ITU-T G.711 'Pulse Code Modulation (PCM) of Voice Frequencies'.
INT tdmaBcModemRate	1.3.6.1.4.1.562.2.4.1.136.3.10.1.2	INTEGER	read-only	This attribute indicates the transmission rate of the current modem in use. All rates are the same in both the transmit and receive directions.
OCT tdmaBcModemModemAlgorithmInUse	1.3.6.1.4.1.562.2.4.1.136.3.10.1.3	OCTET STRING	read-only	This attribute indicates the current modem algorithm(s) active for the channel. This attribute has one of the following values: t30: T.30 is active. T.30 is the Group 3 fax protocol. v17: V.17 is active.V.17 is an ITU-T 14400bit/s modem standard. v21: V.21 is active. V.21 is an ITU-4 300bit/s modem standard. v22: V.22 ia active. V.22 is an ITU-T modem standard that operates at 1200bit/s and 600 baud. v22bis: V.22bis is active. V.22bis is an ITU-T modem standard that operates at 2400bit/s and 600 baud. v27ter: V.27ter is active. V.27ter is an ITU-T 7200bit/s modem standard. v29: V.29 is active. V.29 is an ITU-T 9600bit/s modem standard. v32: V.32 is active. V.32 is an ITU-T modem standard that operates at 9600bit/s and 2400 baud. v32bis: V.32bis is an ITU-T modem standard that operates at a speed of 14.4kbit/s. Description of bits: t30(0) v17(1) v21(2) v22(3) v22bis(4) v27ter(5) v29(6) v32(7) v32bis(8)
INT tdmaBcModemProtocolState	1.3.6.1.4.1.562.2.4.1.136.3.10.1.4	INTEGER	read-only	This attribute indicates the active protocol state of the modem in use.This attribute has one of the following values: idle: Modem is in an inactive state and has no current connection established. training: Modem is attempting to establish a connection with the far end modem via handshaking. connected: Modem has establish a connection with the far end modem. releasing: Modem has begun tearing down the connection.
INT tdmaBcModemMobileSideFlowControlState	1.3.6.1.4.1.562.2.4.1.136.3.10.1.5	INTEGER	read-only	This attribute indicates the state of flow control based on whether flow control was requested by the mobile side of the connection and an indication was sent to an upper layer protocol. This attribute has one of the following values: on: Flow control is active towards the mobile side of the call. off: Flow control is not active towards the mobile side of the call. DESCRIPTION
INT tdmaBcModemPstnSideFlowControlState	1.3.6.1.4.1.562.2.4.1.136.3.10.1.6	INTEGER	read-only	This attribute indicates the state of flow control based on whether flow control was requested by the PSTN side of the connection and an indication was sent to the Digital Signal Processor. This attribute has one of the following values: on: Flow control is active towards the DSP (PSTN side of the call). off: Flow control is not active towards the DSP (PSTN side of the call).
INT tdmaBcModemAsyncMode	1.3.6.1.4.1.562.2.4.1.136.3.10.1.7	INTEGER	read-only	This attribute indicates whether conversion between synchronous and asynchronous data format (specifically, the stripping or insertion of start and stop bits) is being performed. The value is on unless the V.42 layer is active or it is a fax call. This attribute has one of the following values: on: Conversion between synchronous and asynchronous data is being performed. off: Conversion between synchronous and asynchronous data is not being performed.
INT tdmaBcModemOutbandFlowControl	1.3.6.1.4.1.562.2.4.1.136.3.10.1.8	INTEGER	read-only	This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when the Modem Application Layer (MAL) receives an xon or xoff from the PSTN, the MAL converts the instruction into a primitive and sends it to the Data Service Control (DSC). In the opposite direction with outband flow control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into an xon or xoff and forwards it to the PSTN. If outband flow control is off, then all flow control is handled inband. The modem performs either inband or outband flow control unless V.42 layer is active, it is a fax call, or no flow control was specified by the DMS-MTX. This attribute has one of the following values: on: Conversion to and from out-of-band signaling is enabled. off: Conversion to and from out-of-band signaling is disabled.
INT tdmaBcModemOutbandBreak	1.3.6.1.4.1.562.2.4.1.136.3.10.1.9	INTEGER	read-only	This attribute indicates whether inband or outband break control conversions are being performed. If outband break control is on, when the modem detects a break condition coming from the PSTN, the Modem Application Layer (MAL) converts the instruction into a primitive and forwards it to the Data Service Control (DSC). In the opposite direction with outband break control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into a break and forwards it to the PSTN. When a break condition is discovered all subsequent incoming data is discarded until a start bit is received.
INT tdmaBcModemAutobaud	1.3.6.1.4.1.562.2.4.1.136.3.10.1.10	INTEGER	read-only	This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (1) the initial modem data rate value, and (2) whether a modem is allowed to perform autobauding (on) or not (off). With autobauding on, the modem is allowed to connect using a valid modem data rate less than or equal to the initial rate specified to the modem by the DMS-MTX. If a modem cannot perform autobauding and the carrier cannot be established at the initial data rate, the modem is disabled.
tdmaBcModemStatsTable	1.3.6.1.4.1.562.2.4.1.136.3.11		not-accessible	This group contains operational attributes that measure performance of the modem component for this particular TdmaIwfBearerChannel.
tdmaBcModemStatsEntry	1.3.6.1.4.1.562.2.4.1.136.3.11.1		not-accessible	An entry in the tdmaBcModemStatsTable.
C32 tdmaBcModemTxBytes	1.3.6.1.4.1.562.2.4.1.136.3.11.1.1	Counter32	read-only	This attribute counts the number of payload bytes transmitted. The counter wraps when it exceeds the maximum value.
C32 tdmaBcModemRxBytes	1.3.6.1.4.1.562.2.4.1.136.3.11.1.2	Counter32	read-only	This attribute counts the number of payload bytes received. The counter wraps when it exceeds the maximum value.
C32 tdmaBcModemFramingErrors	1.3.6.1.4.1.562.2.4.1.136.3.11.1.3	Counter32	read-only	This attribute counts the number of framing errors detected by the hardware. This is the absence of a stop bit after a start bit and eight bits of data. All incoming data is discarded until the next start bit is received. The counter wraps when it exceeds the maximum value.
tdmaBcFax	1.3.6.1.4.1.562.2.4.1.136.4
tdmaBcFaxRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.4.1		not-accessible	This entry controls the addition and deletion of tdmaBcFax components.
tdmaBcFaxRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.4.1.1		not-accessible	A single entry in the table represents a single tdmaBcFax component.
ROW tdmaBcFaxRowStatus	1.3.6.1.4.1.562.2.4.1.136.4.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcFax components. These components cannot be added nor deleted.
STR tdmaBcFaxComponentName	1.3.6.1.4.1.562.2.4.1.136.4.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcFaxStorageType	1.3.6.1.4.1.562.2.4.1.136.4.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcFax tables.
NON tdmaBcFaxIndex	1.3.6.1.4.1.562.2.4.1.136.4.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcFax tables.
tdmaBcFaxOperTable	1.3.6.1.4.1.562.2.4.1.136.4.10		not-accessible	This group contains operational attributes which measure the performance of the fax protocol.
tdmaBcFaxOperEntry	1.3.6.1.4.1.562.2.4.1.136.4.10.1		not-accessible	An entry in the tdmaBcFaxOperTable.
INT tdmaBcFaxActiveMode	1.3.6.1.4.1.562.2.4.1.136.4.10.1.1	INTEGER	read-only	This attribute indicates the mode of the fax T.30 protocol, determined during Exchange Identification (XID) negotiations. The following modes are supported: normal: Normal T.30 protocol, Error Correction Mode (ECM) not used. ecm: Error Correction Mode used. Fax error correction is done using a half-duplex page selective repeat technique.
INT tdmaBcFaxProtocolState	1.3.6.1.4.1.562.2.4.1.136.4.10.1.2	INTEGER	read-only	This attribute indicates the protocol state of the fax adaptor. This attribute has one of the following values: setup: Call setup state. idle: Idle state only transmitting Synchronize (SYNC) frames. bcsRx: Receiving Binary Coded Signal (BCS) packet from modem. bcsTx: Transmitting BCS packet to modem. msgRx: Receiving fax message from modem. msgTx: Transmitting fax message to modem.
U32 tdmaBcFaxMessageRate	1.3.6.1.4.1.562.2.4.1.136.4.10.1.3	Unsigned32	read-only	This attribute indicates the fax message rate used for sending fax documents.
tdmaBcFaxStatsTable	1.3.6.1.4.1.562.2.4.1.136.4.11		not-accessible	This group contains statistical attributes which measure the performance of the fax protocol.
tdmaBcFaxStatsEntry	1.3.6.1.4.1.562.2.4.1.136.4.11.1		not-accessible	An entry in the tdmaBcFaxStatsTable.
C32 tdmaBcFaxTxPagesToMobile	1.3.6.1.4.1.562.2.4.1.136.4.11.1.1	Counter32	read-only	The attribute counts the number of fax pages transmitted to the mobile. The counter wraps when it exceeds the maximum value.
C32 tdmaBcFaxRxPagesFromMobile	1.3.6.1.4.1.562.2.4.1.136.4.11.1.2	Counter32	read-only	This attribute counts the number of fax pages received from the mobile. The counter wraps when it exceeds the maximum value.
tdmaBcDce	1.3.6.1.4.1.562.2.4.1.136.5
tdmaBcDceRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.5.1		not-accessible	This entry controls the addition and deletion of tdmaBcDce components.
tdmaBcDceRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.5.1.1		not-accessible	A single entry in the table represents a single tdmaBcDce component.
ROW tdmaBcDceRowStatus	1.3.6.1.4.1.562.2.4.1.136.5.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcDce components. These components cannot be added nor deleted.
STR tdmaBcDceComponentName	1.3.6.1.4.1.562.2.4.1.136.5.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcDceStorageType	1.3.6.1.4.1.562.2.4.1.136.5.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcDce tables.
NON tdmaBcDceIndex	1.3.6.1.4.1.562.2.4.1.136.5.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcDce tables.
tdmaBcDsc	1.3.6.1.4.1.562.2.4.1.136.6
tdmaBcDscRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.6.1		not-accessible	This entry controls the addition and deletion of tdmaBcDsc components.
tdmaBcDscRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.6.1.1		not-accessible	A single entry in the table represents a single tdmaBcDsc component.
ROW tdmaBcDscRowStatus	1.3.6.1.4.1.562.2.4.1.136.6.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcDsc components. These components cannot be added nor deleted.
STR tdmaBcDscComponentName	1.3.6.1.4.1.562.2.4.1.136.6.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcDscStorageType	1.3.6.1.4.1.562.2.4.1.136.6.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcDsc tables.
NON tdmaBcDscIndex	1.3.6.1.4.1.562.2.4.1.136.6.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcDsc tables.
tdmaBcDscOperTable	1.3.6.1.4.1.562.2.4.1.136.6.10		not-accessible	This group contains operational attributes that measure the performance of the DSC asynchronous data service.
tdmaBcDscOperEntry	1.3.6.1.4.1.562.2.4.1.136.6.10.1		not-accessible	An entry in the tdmaBcDscOperTable.
INT tdmaBcDscP0CompressionDirection	1.3.6.1.4.1.562.2.4.1.136.6.10.1.1	INTEGER	read-only	This attribute indicates the direction of compression requested from logical link 0 (LL0). This attribute has one of the following values: noCpmpression: No data compression. compInitrResp: Compression initiator to responder. compRespInitr: compression responder to initiator. compBoth: compression in both directions.
U32 tdmaBcDscP1CompressionMaximumCodewords	1.3.6.1.4.1.562.2.4.1.136.6.10.1.2	Unsigned32	read-only	This attribute indicates the maximum number of codewords to be requested from logical link 0 (LL0) for compression. A codeword is a binary number that represents a string of characters.
U32 tdmaBcDscP2CompressionMaximumCharacters	1.3.6.1.4.1.562.2.4.1.136.6.10.1.3	Unsigned32	read-only	This attribute indicates the maximum number of characters that can be represented by a single codeword to be requested from logical link 0 (LL0) for compression.
tdmaBcDscStatsTable	1.3.6.1.4.1.562.2.4.1.136.6.11		not-accessible	This group contains statistical attributes that measure the performance of the DSC asynchronous data service.
tdmaBcDscStatsEntry	1.3.6.1.4.1.562.2.4.1.136.6.11.1		not-accessible	An entry in the tdmaBcDscStatsTable.
C32 tdmaBcDscTxBytes	1.3.6.1.4.1.562.2.4.1.136.6.11.1.1	Counter32	read-only	This attribute counts the number of data bytes relayed by DSC in the transmit direction (towards the mobile). The counter wraps when it exceeds the maximum value.
C32 tdmaBcDscRxBytes	1.3.6.1.4.1.562.2.4.1.136.6.11.1.2	Counter32	read-only	This attribute counts the number of data bytes relayed by DSC in the receive direction (from the mobile). The counter wraps when it exceeds the maximum value.
tdmaBcRlp1	1.3.6.1.4.1.562.2.4.1.136.7
tdmaBcRlp1RowStatusTable	1.3.6.1.4.1.562.2.4.1.136.7.1		not-accessible	This entry controls the addition and deletion of tdmaBcRlp1 components.
tdmaBcRlp1RowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.7.1.1		not-accessible	A single entry in the table represents a single tdmaBcRlp1 component.
ROW tdmaBcRlp1RowStatus	1.3.6.1.4.1.562.2.4.1.136.7.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcRlp1 components. These components cannot be added nor deleted.
STR tdmaBcRlp1ComponentName	1.3.6.1.4.1.562.2.4.1.136.7.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcRlp1StorageType	1.3.6.1.4.1.562.2.4.1.136.7.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcRlp1 tables.
NON tdmaBcRlp1Index	1.3.6.1.4.1.562.2.4.1.136.7.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcRlp1 tables.
tdmaBcRlp1OperTable	1.3.6.1.4.1.562.2.4.1.136.7.10		not-accessible	This group contains operational attributes that measure performance of the TdmaIwfBearerChannel.
tdmaBcRlp1OperEntry	1.3.6.1.4.1.562.2.4.1.136.7.10.1		not-accessible	An entry in the tdmaBcRlp1OperTable.
U32 tdmaBcRlp1Layer3L0ReqWinSize	1.3.6.1.4.1.562.2.4.1.136.7.10.1.1	Unsigned32	read-only	This attribute indicates the window size for Service Access Point (SAP) 0 requested by layer 3. The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time.
U32 tdmaBcRlp1Layer3L1ReqWinSize1	1.3.6.1.4.1.562.2.4.1.136.7.10.1.2	Unsigned32	read-only	This attribute indicates the window size for Service Access Point (SAP) 1 requested by layer 3. The window size is the maximum number of sequentially numbered Information (I) frames that may be unacknowledged at any given time.
U32 tdmaBcRlp1T1ResponseTimer	1.3.6.1.4.1.562.2.4.1.136.7.10.1.3	Unsigned32	read-only	This attribute indicates the current T1 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Information (XID). This attribute specifies the time the receiving RLP1 entity shall wait for a response from the peer TIA-136-310 (formerly IS-130) application. The value used for XID negotiations can be provisioned in the TdmaCs/* Rlp1 t1ResponseTimer attribute.
U32 tdmaBcRlp1T2LinkActivityTimer	1.3.6.1.4.1.562.2.4.1.136.7.10.1.4	Unsigned32	read-only	This attribute indicates the current T2 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Information (XID). This attribute specifies the maximum time the receiving RLP1 entity shall wait for link activity. The value used for XID negotiations can be provisioned in the TdmaCs/* Rlp1 t2LinkActivityTimer attribute.
U32 tdmaBcRlp1T3PeerAckTimer	1.3.6.1.4.1.562.2.4.1.136.7.10.1.5	Unsigned32	read-only	This attribute indicates the current T3 timer for Service Access Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1 (RLP1), during Exchange Information (XID). The attribute specifies the maximum time the receiving RLP1 entity shall wait for the peer to ACK or NAK data. The value used for XID negotiations can be provisioned in the TdmaCs/* Rlp1 t3PeerAckTimer attribute.
tdmaBcRlp1StatsTable	1.3.6.1.4.1.562.2.4.1.136.7.11		not-accessible	This group contains operational attributes that measure performance of the TdmaIwfBearerChannel.
tdmaBcRlp1StatsEntry	1.3.6.1.4.1.562.2.4.1.136.7.11.1		not-accessible	An entry in the tdmaBcRlp1StatsTable.
C32 tdmaBcRlp1TxFrames	1.3.6.1.4.1.562.2.4.1.136.7.11.1.1	Counter32	read-only	This attribute counts the number of valid frames transmitted to the mobile. The counter wraps when it exceeds the maximum value.
C32 tdmaBcRlp1RxFrames	1.3.6.1.4.1.562.2.4.1.136.7.11.1.2	Counter32	read-only	This attributes counts the number of valid frames received from the mobile. The counter wraps when it exceeds the maximum value.
C32 tdmaBcRlp1BadRxFrames	1.3.6.1.4.1.562.2.4.1.136.7.11.1.3	Counter32	read-only	This attribute count the total number of bad RLP1 frames received from the mobile. The counter wraps when it exceeds the maximum value.
tdmaBcV42	1.3.6.1.4.1.562.2.4.1.136.8
tdmaBcV42RowStatusTable	1.3.6.1.4.1.562.2.4.1.136.8.1		not-accessible	This entry controls the addition and deletion of tdmaBcV42 components.
tdmaBcV42RowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.8.1.1		not-accessible	A single entry in the table represents a single tdmaBcV42 component.
ROW tdmaBcV42RowStatus	1.3.6.1.4.1.562.2.4.1.136.8.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcV42 components. These components cannot be added nor deleted.
STR tdmaBcV42ComponentName	1.3.6.1.4.1.562.2.4.1.136.8.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcV42StorageType	1.3.6.1.4.1.562.2.4.1.136.8.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcV42 tables.
NON tdmaBcV42Index	1.3.6.1.4.1.562.2.4.1.136.8.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcV42 tables.
tdmaBcV42OperTable	1.3.6.1.4.1.562.2.4.1.136.8.10		not-accessible	This group contains operational attributes which measure V.42 error detection and correction performance.
tdmaBcV42OperEntry	1.3.6.1.4.1.562.2.4.1.136.8.10.1		not-accessible	An entry in the tdmaBcV42OperTable.
INT tdmaBcV42ProtocolState	1.3.6.1.4.1.562.2.4.1.136.8.10.1.1	INTEGER	read-only	This attribute indicates the state of V.42. Valid states are: notActive: The V.42 link connection with the PSTN modem is not established. None of the V.42 functions including the error detection, error correction, and flow control is provided to the data call. This is the initial state of V.42. disconnected: This means that the V42 link is disconnected. linkSetup: The V.42 operation enters this state from the disconnected state after the V.42 sends to the PSTN modem a Set Asynchronous Balanced Mode Extended (SABME) frame in an attempt to establish the error control connection with the PSTN modem. frameReject: The V.42 operation enters into this state after it identifies an invalid frame sent by the peer and it sends back a frame reject (FRMR) frame to the peer. disconnectRequest: The V.42 operation enters into this state after it sends to the peer a disconnect (DISC) frame with the attempt to disconnect the V.42 error control link. informationTransfer: The V.42 enters into this state after it receives a UA (unnumbered acknowledgment) frame which the peer sent upon receipt of the SAMBE frame from IWF V.42. Once in this state, the V.42 can exchange data and supervisory information with its peer. waitingAck: The V.42 enters this state after it sends polling enquiry to its peer. The V.42 sends the polling enquiry when it receives a reject frame (REJ) from its peer or either its acknowledgment timer or inactivity timer timed out on the information frames sent out.
U32 tdmaBcV42TxN401FrameSize	1.3.6.1.4.1.562.2.4.1.136.8.10.1.2	Unsigned32	read-only	This attribute indicates the current value of parameter N401 for V.42 which is negotiated during Exchange Information (XID). This is the maximum number of octets that can be carried in the information field of an information frame that the IWF V.42 transmits to the PSTN modem. The IWF V.42 puts this or even smaller size of data into the outgoing information frame. The value used for XID negotiations can be provisioned via TdmaCs/* V42.
U32 tdmaBcV42RxN401FrameSize	1.3.6.1.4.1.562.2.4.1.136.8.10.1.3	Unsigned32	read-only	This attribute indicates the current value of N401, that is negotiated during Exchange Identification (XID). This is the maximum number of octets that can be carried in the information field of an information frame received from the PSTN modem. An incoming information frame carrying data octets more than this size shall be rejected by the IWF V.42. The value used for XID negotiations can be provisioned via TdmaCs/* V42.
U32 tdmaBcV42TxKWindowSize	1.3.6.1.4.1.562.2.4.1.136.8.10.1.4	Unsigned32	read-only	This attribute indicates the current value of k, that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for the information frames that the V.42 transmits to the PSTN modem. This size governs the maximum number of information frames that the IWF V.42 error- correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned via TdmaCs/* V42.
U32 tdmaBcV42RxKWindowSize	1.3.6.1.4.1.562.2.4.1.136.8.10.1.5	Unsigned32	read-only	This attribute indicates the current value of k that is negotiated during Exchange Identification (XID). This is the size of flow control sliding window used for information frames transmitted from the PSTN modem. This size governs the maximum number of information frames that the peer of the IWF V.42 error-correcting entity can have outstanding (that is, unacknowledged). The value used for XID negotiations can be provisioned via TdmaCs/* V42.
INT tdmaBcV42V42ActiveInCall	1.3.6.1.4.1.562.2.4.1.136.8.10.1.6	INTEGER	read-only	This attribute indicates whether V42 is really being used in this data call.
INT tdmaBcV42V42BisActiveInCall	1.3.6.1.4.1.562.2.4.1.136.8.10.1.7	INTEGER	read-only	This attribute indicates whether V42bis is really being used in this data call.
tdmaBcV42StatsTable	1.3.6.1.4.1.562.2.4.1.136.8.11		not-accessible	This group contains statistical attributes that measure the V.42 error detection and correction performance.
tdmaBcV42StatsEntry	1.3.6.1.4.1.562.2.4.1.136.8.11.1		not-accessible	An entry in the tdmaBcV42StatsTable.
C32 tdmaBcV42RxIBytes	1.3.6.1.4.1.562.2.4.1.136.8.11.1.1	Counter32	read-only	This attribute counts the total number of bytes that the V.42 actually received from the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42TxIBytes	1.3.6.1.4.1.562.2.4.1.136.8.11.1.2	Counter32	read-only	This attribute counts the total number of bytes that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42RxIFrames	1.3.6.1.4.1.562.2.4.1.136.8.11.1.3	Counter32	read-only	This attribute counts the total number of Information (I) frames that the V.42 received from the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42TxIFrames	1.3.6.1.4.1.562.2.4.1.136.8.11.1.4	Counter32	read-only	This attribute counts the total number of information frames that the V.42 transmitted to the PSTN modem in a data call. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42RetransmittedFrames	1.3.6.1.4.1.562.2.4.1.136.8.11.1.5	Counter32	read-only	This attribute counts the total number of frames retransmitted by the IWF V.42 entity in a data call. The V.42 retransmits the same frame when the associated T401 acknowledgment timer timeouts or when a Reject (REJ) supervisory frame has been received from the PSTN modem. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42T1AckTimeouts	1.3.6.1.4.1.562.2.4.1.136.8.11.1.6	Counter32	read-only	This attribute counts the total number of times that the T401 timer has timed out within a data call. If this timer times-out frequently, the operator may need to adjust the provisioned parameter T401 acknowledgment timer to a larger time amount, since every time that V.42 sends out a frame it sets the T401 timer to wait for the peer's acknowledgment of the frame. When the timer times-out and no acknowledgment has been received, the V.42 sends the same frame to its peer. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42RemoteBusyIndications	1.3.6.1.4.1.562.2.4.1.136.8.11.1.7	Counter32	read-only	This attribute counts the total number of times the PSTN modem enters a busy state (the IWF has received a Receive Not Ready message) and asks the IWF V.42 not to send Information (I) frames to it until it is ready to receive information frames again (indicated by receipt of a Receive Ready message or a data message). The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42LocalBusyIndications	1.3.6.1.4.1.562.2.4.1.136.8.11.1.8	Counter32	read-only	This attribute counts the total number of times the IWF V.42 enters in a busy condition and asks the peer to stop sending information frames until it has cleared up from the busy condition. The V.42 enters busy condition when its data buffer is about to be overflowed by the incoming Information (I) frames. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42BadFramesRx	1.3.6.1.4.1.562.2.4.1.136.8.11.1.9	Counter32	read-only	This attribute counts the total number of bad frames the IWF V.42 has received from the PSTN remote modem within the data call. In this instance, 'bad frames' refer to the V.42 protocol error frames other than the check sequence error frames. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42CrcErrorsRx	1.3.6.1.4.1.562.2.4.1.136.8.11.1.10	Counter32	read-only	This attribute counts the total number of frames received from the remote PSTN modem that contain incorrect frame check sequence. A high value signifies the condition of the physical medium is poor. The counter wraps when it exceeds the maximum value.
tdmaBcV42Bis	1.3.6.1.4.1.562.2.4.1.136.9
tdmaBcV42BisRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.9.1		not-accessible	This entry controls the addition and deletion of tdmaBcV42Bis components.
tdmaBcV42BisRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.9.1.1		not-accessible	A single entry in the table represents a single tdmaBcV42Bis component.
ROW tdmaBcV42BisRowStatus	1.3.6.1.4.1.562.2.4.1.136.9.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcV42Bis components. These components cannot be added nor deleted.
STR tdmaBcV42BisComponentName	1.3.6.1.4.1.562.2.4.1.136.9.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcV42BisStorageType	1.3.6.1.4.1.562.2.4.1.136.9.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcV42Bis tables.
NON tdmaBcV42BisIndex	1.3.6.1.4.1.562.2.4.1.136.9.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcV42Bis tables.
tdmaBcV42BisOperTable	1.3.6.1.4.1.562.2.4.1.136.9.10		not-accessible	This group contains operational attributes that measure the performance of IwfV42bis.
tdmaBcV42BisOperEntry	1.3.6.1.4.1.562.2.4.1.136.9.10.1		not-accessible	An entry in the tdmaBcV42BisOperTable.
INT tdmaBcV42BisProtocolModeEncoder	1.3.6.1.4.1.562.2.4.1.136.9.10.1.1	INTEGER	read-only	This attribute indicates the current mode of the IwfV42bis encoder. This mode can be either: transparent: A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed: A mode of operation in which data is transmitted in codewords. The encoder switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data compression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
INT tdmaBcV42BisProtocolModeDecoder	1.3.6.1.4.1.562.2.4.1.136.9.10.1.2	INTEGER	read-only	This attribute indicates the current mode of the V.42bis decoder. This mode can be either: transparent: A mode of operation in which compression has been selected but data is being transmitted in uncompressed form. Transparent mode command sequences may be inserted into the data stream. compressed: A mode of operation in which data is transmitted in codewords. The encoder (at the mobile or PSTN) switches between the two modes depending on whether the data coming from the Date Terminal Equipment (DTE) is suitable for compression. The data compression function periodically determines the compressibility of the data based on a comparison of the number of bits required to represent a segment of the data stream before and after compression.
INT tdmaBcV42BisP0CompressionDirection	1.3.6.1.4.1.562.2.4.1.136.9.10.1.3	INTEGER	read-only	This attribute indicates the direction in which V.42bis is active, negotiated at link setup by the data link protocol through Exchange Identification (XID) negotiation of parameter P0 (compression direction). The value used for XID negotiations can be provisioned via TdmaCs/* V42bis. This attribute has one of the following values: noCompression: No data compression. compInitrResp: The data sent by the IWF to the other entity is compressed. compRespInitr: The data received by the IWF from the other entity is compressed. compBoth: compression in both directions.
U32 tdmaBcV42BisP1MaximumCodewords	1.3.6.1.4.1.562.2.4.1.136.9.10.1.4	Unsigned32	read-only	This attribute indicates the maximum number of codewords in the dictionary negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P1 (number of codewords). The value used for XID negotiations can be provisioned via TdmaCs/* V42bis.
U32 tdmaBcV42BisP2MaximumStringSize	1.3.6.1.4.1.562.2.4.1.136.9.10.1.5	Unsigned32	read-only	This attribute indicates the maximum number of characters allowed in a string represented by a codeword negotiated at link setup by the data link protocol by way of the Exchange Identification (XID) negotiation of parameter P2 (maximum string size). The value used for XID negotiations can be provisioned via TdmaCs/* V42bis.
INT tdmaBcV42BisLastDecodeError	1.3.6.1.4.1.562.2.4.1.136.9.10.1.6	INTEGER	read-only	This attribute indicates last error found by the decoder. This attribute has one of the following values: none: No errors found. badStepup: Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). codewordEqC1: Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). emptyCodeword: Receipt of a codeword representing an empty dictionary entry. reservedCommand: Receipt of a reserved command code. generalError: Receipt of any other error. The action taken by V.42bis on detecting an error is provisioned via TdmaCs/* V42bis.
NUM tdmaBcV42BisCompRatioEncoder	1.3.6.1.4.1.562.2.4.1.136.9.10.1.7	FixedPoint2	read-only	This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder running on the Passport. This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
NUM tdmaBcV42BisCompRatioDecoder	1.3.6.1.4.1.562.2.4.1.136.9.10.1.8	FixedPoint2	read-only	This attribute indicates the number of uncompressed bytes divided by the number of compressed bytes. A value greater than one means that the data is being compressed. This is the compression ratio achieved by the V.42bis encoder at the mobile or PSTN. This attribute is relevant for both protocol modes transparent and compressed as the encoder switches between the two modes.
tdmaBcV42BisStatsTable	1.3.6.1.4.1.562.2.4.1.136.9.11		not-accessible	This group contains statistical attributes that measure the performance of IwfV42bis.
tdmaBcV42BisStatsEntry	1.3.6.1.4.1.562.2.4.1.136.9.11.1		not-accessible	An entry in the tdmaBcV42BisStatsTable.
C32 tdmaBcV42BisModeChangesEncode	1.3.6.1.4.1.562.2.4.1.136.9.11.1.1	Counter32	read-only	This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the encoder. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42BisModeChangesDecode	1.3.6.1.4.1.562.2.4.1.136.9.11.1.2	Counter32	read-only	This attribute counts the number of mode changes (from transparent to compressed or from compressed to transparent) by the decoder. The mode changes are determined by the encoder at the mobile or the PSTN. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42BisResetsEncode	1.3.6.1.4.1.562.2.4.1.136.9.11.1.3	Counter32	read-only	This attribute counts the number of resets sent by the encoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42BisResetsDecode	1.3.6.1.4.1.562.2.4.1.136.9.11.1.4	Counter32	read-only	This attribute counts the number of resets received by the decoder. A reset is a command code sent by the encoder to force dictionary reinitialization. The resets of the decoder are determined by the encoder at the mobile or PSTN. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42BisReinitializations	1.3.6.1.4.1.562.2.4.1.136.9.11.1.5	Counter32	read-only	This attribute counts the number of times V.42bis is reinitialized because of a destructive break (a destructive break is a break that causes data to be discarded) occurring on the error-corrected connection initiated by either the mobile or PSTN. The counter wraps when it exceeds the maximum value.
C32 tdmaBcV42BisErrorsInDecode	1.3.6.1.4.1.562.2.4.1.136.9.11.1.6	Counter32	read-only	This attribute counts the number of errors found by the decoder. The errors could be any of the following: 1.Receipt of STEPUP (step up codeword size) codeword when it would cause C2 (current code word size) to exceed N1 (maximum code word size). 2. Receipt of a codeword, at any time, equal to C1 (next empty dictionary entry). 3. Receipt of a codeword representing an empty dictionary entry. 4. Receipt of a reserved command code. 5. Receipt of any other error. The counter wraps when it exceeds the maximum value. The action taken by V.42bis on detecting any of these errors is provisioned via TdmaCs/* V42bis.
tdmaBcUr	1.3.6.1.4.1.562.2.4.1.136.10
tdmaBcUrRowStatusTable	1.3.6.1.4.1.562.2.4.1.136.10.1		not-accessible	This entry controls the addition and deletion of tdmaBcUr components.
tdmaBcUrRowStatusEntry	1.3.6.1.4.1.562.2.4.1.136.10.1.1		not-accessible	A single entry in the table represents a single tdmaBcUr component.
ROW tdmaBcUrRowStatus	1.3.6.1.4.1.562.2.4.1.136.10.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of tdmaBcUr components. These components cannot be added nor deleted.
STR tdmaBcUrComponentName	1.3.6.1.4.1.562.2.4.1.136.10.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO tdmaBcUrStorageType	1.3.6.1.4.1.562.2.4.1.136.10.1.1.4	StorageType	read-only	This variable represents the storage type value for the tdmaBcUr tables.
NON tdmaBcUrIndex	1.3.6.1.4.1.562.2.4.1.136.10.1.1.10	NonReplicated	not-accessible	This variable represents the index for the tdmaBcUr tables.
tdmaBcUrOperTable	1.3.6.1.4.1.562.2.4.1.136.10.10		not-accessible	This group contains operational attributes that measure the performance of the UpperRelay.
tdmaBcUrOperEntry	1.3.6.1.4.1.562.2.4.1.136.10.10.1		not-accessible	An entry in the tdmaBcUrOperTable.
U32 tdmaBcUrRxBufferSize	1.3.6.1.4.1.562.2.4.1.136.10.10.1.1	Unsigned32	read-only	This attribute indicates the size of the receive flow control buffer. This attribute may be viewed via TdmaBc/,,, UpperRelay.
INT tdmaBcUrTxFlowControlState	1.3.6.1.4.1.562.2.4.1.136.10.10.1.2	INTEGER	read-only	This attribute indicates whether the transmit flow control is active or not. This attribute has one of the following values: active: The transmit flow control is active. inactive: The transmit flow control is inactive. This attribute may be viewed via TdmaBc/,,, UpperRelay.
INT tdmaBcUrRxFlowControlState	1.3.6.1.4.1.562.2.4.1.136.10.10.1.3	INTEGER	read-only	This attribute indicates whether the receive flow control is active or not. This attribute has one of the following values: active: The receive flow control is active. inactive: The receive flow control is inactive. This attribute may be viewed via TdmaBc/,,, UpperRelay.
tdmaBcUrStatsTable	1.3.6.1.4.1.562.2.4.1.136.10.11		not-accessible	This group contains operational attributes that measure the performance of the UpperRelay.
tdmaBcUrStatsEntry	1.3.6.1.4.1.562.2.4.1.136.10.11.1		not-accessible	An entry in the tdmaBcUrStatsTable.
C32 tdmaBcUrTxFrames	1.3.6.1.4.1.562.2.4.1.136.10.11.1.1	Counter32	read-only	This attribute counts the number of frames that are sent in the transmit direction. The counter wraps when it exceeds the maximum value. The counter wraps when it exceeds the maximum value.
C32 tdmaBcUrRxFrames	1.3.6.1.4.1.562.2.4.1.136.10.11.1.2	Counter32	read-only	This attribute counts the number of frames that are sent in the receive direction. The counter wraps when it exceeds the maximum value.
C32 tdmaBcUrUnacknowledgedFrames	1.3.6.1.4.1.562.2.4.1.136.10.11.1.3	Counter32	read-only	This attribute indicates the current number of frames sent that have not been acknowledged for this instance of the UpperRelay. The counter wraps when it exceeds the maximum value.
C32 tdmaBcUrCumUnacknowledgedFrames	1.3.6.1.4.1.562.2.4.1.136.10.11.1.4	Counter32	read-only	This attribute is the total number of unacknowledged frames for this instance of the UpperRelay. It is not reset when a new call starts.
tdmaBcOperTable	1.3.6.1.4.1.562.2.4.1.136.101		not-accessible	This group contains operational attributes concerning the operation of this particular TdmaIwfBearerChannel for the current or most recent call.
tdmaBcOperEntry	1.3.6.1.4.1.562.2.4.1.136.101.1		not-accessible	An entry in the tdmaBcOperTable.
INT tdmaBcState	1.3.6.1.4.1.562.2.4.1.136.101.1.1	INTEGER	read-only	This attribute indicates the current state of the MSC/IWF Interface Protocol (MIP) Message Router (MMR) for an IWF element. This attribute has one of the following values: idle: Startup state of IWF element. setup: This call half is being set up. active: This call half has been connected by both the MTX and IWF and is active. release: This call half is being released.
INT tdmaBcCallType	1.3.6.1.4.1.562.2.4.1.136.101.1.2	INTEGER	read-only	This attribute indicates the current call type. This attribute has one of the following values: analogSpeech: Analog speech calls. digitalSpeech: Digital speech calls. analogPrefSpeech: Analog preferred speech calls. digitalPrefSpeech: Digital preferred speech calls. asyncData: Asynchronous data service calls. g3Fax: Group 3 fax calls. rejected: Rejected calls. stuIII: STU III calls. notUsedYet: Bearer Channel has not been used in a call yet.
INT tdmaBcLastResponseCode	1.3.6.1.4.1.562.2.4.1.136.101.1.3	INTEGER	read-only	This attribute indicates the MSC/IWF Interface Protocol (MIP) Message Router (MMR) response code returned for the last call which was active on this particular TdmaIwfBearerChannel. This attribute has one of the following values: noCause: No cause available. unassignedNumber: Unallocated or unassigned number. noRouteToDest: No route to destination. normalClearing: The call was terminated normally. userBusy: User busy. noResponse: No carrier. userNoAnswer: No answer from user. invalidNumberFormat: Translation or routing problem. unspecNormal: Normal, unspecified. temporaryFailure: Temporary failure. channelUnavailable: Channel unavailable. resourceUnavailable: Resources unavailable to handle call. qosUnavailabled: Specified rate of call unavailable. serviceUnavailable: Service not implemented. unimplementedOption: Option not implemented. invalidCallRefValue: Invalid call reference value. invalidChannel: Identified channel does not exist. unspecInvalidMessage: Invalid message, unspecified. missingMandatoryIe: Missing mandatory information element. invalidMessageType: Message type not implemented. incompatibleMessage: Message not compatible with call state. timerRecovery: Recovery on timer expiration. protocolError: Protocol error, unspecified.
NUM tdmaBcMateBearerChannel	1.3.6.1.4.1.562.2.4.1.136.101.1.4	RowPointer	read-only	This attribute contains the name of the mate TdmaIwfBearerChannel that this TdmaIwfBearerChannel is involved with in the currently active call. In the case of a FastConnect call, this mate is a TdmaIwfFcBearerChannel.
tdmaBcCidDataTable	1.3.6.1.4.1.562.2.4.1.136.103		not-accessible	This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
tdmaBcCidDataEntry	1.3.6.1.4.1.562.2.4.1.136.103.1		not-accessible	An entry in the tdmaBcCidDataTable.
U32 tdmaBcCustomerIdentifier	1.3.6.1.4.1.562.2.4.1.136.103.1.1	Unsigned32	read-write	This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
tdmaBcStateTable	1.3.6.1.4.1.562.2.4.1.136.104		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
tdmaBcStateEntry	1.3.6.1.4.1.562.2.4.1.136.104.1		not-accessible	An entry in the tdmaBcStateTable.
INT tdmaBcAdminState	1.3.6.1.4.1.562.2.4.1.136.104.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT tdmaBcOperationalState	1.3.6.1.4.1.562.2.4.1.136.104.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT tdmaBcUsageState	1.3.6.1.4.1.562.2.4.1.136.104.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
tdmaIwfMIB	1.3.6.1.4.1.562.2.4.2.140
tdmaIwfGroup	1.3.6.1.4.1.562.2.4.2.140.1
tdmaIwfGroupBE	1.3.6.1.4.1.562.2.4.2.140.1.5
tdmaIwfGroupBE01	1.3.6.1.4.1.562.2.4.2.140.1.5.2
tdmaIwfGroupBE01A	1.3.6.1.4.1.562.2.4.2.140.1.5.2.2
tdmaIwfCapabilities	1.3.6.1.4.1.562.2.4.2.140.3
tdmaIwfCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.140.3.5
tdmaIwfCapabilitiesBE01	1.3.6.1.4.1.562.2.4.2.140.3.5.2
tdmaIwfCapabilitiesBE01A	1.3.6.1.4.1.562.2.4.2.140.3.5.2.2

RFC description

Nortel Magellan Passport TDMA Interworking Function (IWF) MIB for managing mobile telephone exchange calls.

Start monitoring Nortel Magellan Passport wide-area switch (mobile carrier TDMA interworking) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-TdmaIwfMIB

What Is Nortel-Magellan-Passport-TdmaIwfMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description