All MIBs › Nortel-Magellan-Passport-TdmaIwfMIB › tdmaBcModemOutbandFlowControl
tdmaBcModemOutbandFlowControl
Module: Nortel-Magellan-Passport-TdmaIwfMIB
OID (symbolic): Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemOutbandFlowControl
OID (numeric): 1.3.6.1.4.1.562.2.4.1.136.3.10.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when the Modem Application Layer (MAL) receives an xon or xoff from the PSTN, the MAL converts the instruction into a primitive and sends it to the Data Service Control (DSC). In the opposite direction with outband flow control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into an xon or xoff and forwards it to the PSTN. If outband flow control is off, then all flow control is handled inband. The modem performs either inband or outband flow control unless V.42 layer is active, it is a fax call, or no flow control was specified by the DMS-MTX. This attribute has one of the following values: on: Conversion to and from out-of-band signaling is enabled. off: Conversion to and from out-of-band signaling is disabled.
What is tdmaBcModemOutbandFlowControl?
Whether flow-control signals (xon/xoff) are being converted out-of-band for this channel: when on, an xon/xoff seen from the PSTN side is turned into a control primitive toward the Data Service Control layer (and vice versa); when off, flow control stays entirely inband. It's normally off whenever V.42 is active, it's a fax call, or the MTX specified no flow control.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.136.3.10.1.8 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemOutbandFlowControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.136.3.10.1.8.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemOutbandFlowControl.1
Start monitoring Nortel Magellan Passport wide-area switch (mobile carrier TDMA interworking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemOutbandFlowControl OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport wide-area switch (mobile carrier TDMA interworking) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.136 | tdmaBc | Nortel-Magellan-Passport-TdmaIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.136.3 | tdmaBcModem | Nortel-Magellan-Passport-TdmaIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.136.3.10 | tdmaBcModemOperTable | Nortel-Magellan-Passport-TdmaIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1 | tdmaBcModemOperEntry | Nortel-Magellan-Passport-TdmaIwfMIB |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.8 | tdmaBcModemOutbandFlowControl | Nortel-Magellan-Passport-TdmaIwfMIB |