Nortel-Magellan-Passport-TdmaIwfMIB :: tdmaBcModemAutobaud

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-TdmaIwfMIB › tdmaBcModemAutobaud

tdmaBcModemAutobaud

Module: Nortel-Magellan-Passport-TdmaIwfMIB

OID (symbolic): Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemAutobaud

OID (numeric): 1.3.6.1.4.1.562.2.4.1.136.3.10.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (1) the initial modem data rate value, and (2) whether a modem is allowed to perform autobauding (on) or not (off). With autobauding on, the modem is allowed to connect using a valid modem data rate less than or equal to the initial rate specified to the modem by the DMS-MTX. If a modem cannot perform autobauding and the carrier cannot be established at the initial data rate, the modem is disabled.

What is tdmaBcModemAutobaud?

Whether autobauding is active for this channel's modem: the DMS-MTX tells the modem an initial data rate at call setup and whether it may connect at a lower rate if needed (on) or must use exactly the initial rate (off). If autobaud is off and the carrier can't be established at the initial rate, the modem is disabled -- a useful thing to check when a channel's modem won't come up at all.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.136.3.10.1.10
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemAutobaud

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.136.3.10.1.10.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemAutobaud.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tdmaBcModemAutobaud.1

Start monitoring Nortel Magellan Passport wide-area switch (mobile carrier TDMA interworking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-TdmaIwfMIB::tdmaBcModemAutobaud OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport wide-area switch (mobile carrier TDMA interworking) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.136tdmaBcNortel-Magellan-Passport-TdmaIwfMIB
1.3.6.1.4.1.562.2.4.1.136.3tdmaBcModemNortel-Magellan-Passport-TdmaIwfMIB
1.3.6.1.4.1.562.2.4.1.136.3.10tdmaBcModemOperTableNortel-Magellan-Passport-TdmaIwfMIB
1.3.6.1.4.1.562.2.4.1.136.3.10.1tdmaBcModemOperEntryNortel-Magellan-Passport-TdmaIwfMIB
1.3.6.1.4.1.562.2.4.1.136.3.10.1.10tdmaBcModemAutobaudNortel-Magellan-Passport-TdmaIwfMIB