All MIBs › Nortel-Magellan-Passport-FrameRelayMuxMIB
Category: Frame Relay
Description: Manages Nortel Magellan Passport Frame Relay multiplexer configuration and virtual circuit bundling.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-Magellan-Passport-FrameRelayMuxMIB?
Nortel-Magellan-Passport-FrameRelayMuxMIB is a Nortel Magellan/MsCarrier Passport proprietary MIB controlling the addition and deletion of Frame Relay multiplexer (frMux) components on the Passport wide-area switching platform's component-based management architecture, where every provisionable object is represented as a named, creatable/deletable "component". Its row-status table records each component's name, storage type, and index, alongside a separate operational-status table reporting each frMux component's SNMP-visible operational state. As a configuration MIB it lets an administrator provision or remove Frame Relay multiplexer (frMux) components and confirm their operational status. It is deployed on Nortel Magellan/MsCarrier Passport wide-area switching platforms. Engineers can download the Nortel-Magellan-Passport-FrameRelayMuxMIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-FrameRelayMuxMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel Magellan/MsCarrier Passport wide-area switching platforms
Monitoring Examples
An administrator creates a new Frame Relay multiplexer (frMux) component via this MIB's row-status table when provisioning that service on a Nortel Passport switch, then confirms its operational status came up correctly.
What Can Be Monitored
- Frame Relay multiplexer (frMux) component provisioning and operational status
This MIB depends on
Related MIBs
Imported Objects
From Nortel-Magellan-Passport-StandardTextualConventionsMIB
| Counter32 | |
| DisplayString | |
| Gauge32 | |
| Integer32 | |
| InterfaceIndex | |
| PassportCounter64 | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-Magellan-Passport-TextualConventionsMIB
| Link | |
| NonReplicated |
From Nortel-Magellan-Passport-UsefulDefinitionsMIB
| components | OBJECT-IDENTITY |
| passportMIBs | OBJECT-IDENTITY |
From RFC-1212
| OBJECT-TYPE |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| frMux | 1.3.6.1.4.1.562.2.4.1.112 | |||
| frMuxRowStatusTable | 1.3.6.1.4.1.562.2.4.1.112.1 | not-accessible | This entry controls the addition and deletion of frMux components. | |
| frMuxRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.112.1.1 | not-accessible | A single entry in the table represents a single frMux component. | |
| ROW frMuxRowStatus | 1.3.6.1.4.1.562.2.4.1.112.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of frMux components. These components can be added and deleted. |
| STR frMuxComponentName | 1.3.6.1.4.1.562.2.4.1.112.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO frMuxStorageType | 1.3.6.1.4.1.562.2.4.1.112.1.1.4 | StorageType | read-only | This variable represents the storage type value for the frMux tables. |
| I32 frMuxIndex | 1.3.6.1.4.1.562.2.4.1.112.1.1.10 | Integer32 | not-accessible | This variable represents the index for the frMux tables. |
| frMuxFramer | 1.3.6.1.4.1.562.2.4.1.112.2 | |||
| frMuxFramerRowStatusTable | 1.3.6.1.4.1.562.2.4.1.112.2.1 | not-accessible | This entry controls the addition and deletion of frMuxFramer components. | |
| frMuxFramerRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.112.2.1.1 | not-accessible | A single entry in the table represents a single frMuxFramer component. | |
| ROW frMuxFramerRowStatus | 1.3.6.1.4.1.562.2.4.1.112.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of frMuxFramer components. These components cannot be added nor deleted. |
| STR frMuxFramerComponentName | 1.3.6.1.4.1.562.2.4.1.112.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO frMuxFramerStorageType | 1.3.6.1.4.1.562.2.4.1.112.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the frMuxFramer tables. |
| NON frMuxFramerIndex | 1.3.6.1.4.1.562.2.4.1.112.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the frMuxFramer tables. |
| frMuxFramerProvTable | 1.3.6.1.4.1.562.2.4.1.112.2.10 | not-accessible | This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups. | |
| frMuxFramerProvEntry | 1.3.6.1.4.1.562.2.4.1.112.2.10.1 | not-accessible | An entry in the frMuxFramerProvTable. | |
| LIN frMuxFramerInterfaceName | 1.3.6.1.4.1.562.2.4.1.112.2.10.1.1 | Link | read-write | This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run. |
| frMuxFramerLinkTable | 1.3.6.1.4.1.562.2.4.1.112.2.11 | not-accessible | This group contains attributes defining the framing of data on the link interface. | |
| frMuxFramerLinkEntry | 1.3.6.1.4.1.562.2.4.1.112.2.11.1 | not-accessible | An entry in the frMuxFramerLinkTable. | |
| U32 frMuxFramerFlagsBetweenFrames | 1.3.6.1.4.1.562.2.4.1.112.2.11.1.4 | Unsigned32 | read-write | This attribute defines the number of flags that are inserted between frames sent to the link interface. |
| frMuxFramerStateTable | 1.3.6.1.4.1.562.2.4.1.112.2.12 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| frMuxFramerStateEntry | 1.3.6.1.4.1.562.2.4.1.112.2.12.1 | not-accessible | An entry in the frMuxFramerStateTable. | |
| INT frMuxFramerAdminState | 1.3.6.1.4.1.562.2.4.1.112.2.12.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT frMuxFramerOperationalState | 1.3.6.1.4.1.562.2.4.1.112.2.12.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT frMuxFramerUsageState | 1.3.6.1.4.1.562.2.4.1.112.2.12.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| frMuxFramerStatsTable | 1.3.6.1.4.1.562.2.4.1.112.2.13 | not-accessible | This group contains the operational statistics data for a Framer component. | |
| frMuxFramerStatsEntry | 1.3.6.1.4.1.562.2.4.1.112.2.13.1 | not-accessible | An entry in the frMuxFramerStatsTable. | |
| C32 frMuxFramerFrmToIf | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.1 | Counter32 | read-only | The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component. |
| C32 frMuxFramerFrmFromIf | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.2 | Counter32 | read-only | The number of frames received from the link interface by Framer. |
| C32 frMuxFramerOctetFromIf | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.3 | Counter32 | read-only | The number of bytes received from the link interface by Framer. |
| C32 frMuxFramerAborts | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.4 | Counter32 | read-only | This attribute is the total number of aborts received. |
| C32 frMuxFramerCrcErrors | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.5 | Counter32 | read-only | This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link. |
| C32 frMuxFramerLrcErrors | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.6 | Counter32 | read-only | This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link. |
| C32 frMuxFramerNonOctetErrors | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.7 | Counter32 | read-only | This attribute is the total number of frames that were non octet aligned. |
| C32 frMuxFramerOverruns | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.8 | Counter32 | read-only | This attribute is the total number of frames received from the link for which overruns occurred. |
| C32 frMuxFramerUnderruns | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.9 | Counter32 | read-only | This attribute is the total number of frames transmitted to the link for which underruns occurred. |
| C32 frMuxFramerLargeFrmErrors | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.10 | Counter32 | read-only | This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit. |
| C32 frMuxFramerFrmModeErrors | 1.3.6.1.4.1.562.2.4.1.112.2.13.1.11 | Counter32 | read-only | This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode. |
| frMuxFramerUtilTable | 1.3.6.1.4.1.562.2.4.1.112.2.14 | not-accessible | This group contains the link utilizaiton operational data for a Framer component. | |
| frMuxFramerUtilEntry | 1.3.6.1.4.1.562.2.4.1.112.2.14.1 | not-accessible | An entry in the frMuxFramerUtilTable. | |
| G32 frMuxFramerNormPrioLinkUtilToIf | 1.3.6.1.4.1.562.2.4.1.112.2.14.1.1 | Gauge32 | read-only | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute. |
| G32 frMuxFramerNormPrioLinkUtilFromIf | 1.3.6.1.4.1.562.2.4.1.112.2.14.1.3 | Gauge32 | read-only | This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute. |
| frMuxLmi | 1.3.6.1.4.1.562.2.4.1.112.3 | |||
| frMuxLmiRowStatusTable | 1.3.6.1.4.1.562.2.4.1.112.3.1 | not-accessible | This entry controls the addition and deletion of frMuxLmi components. | |
| frMuxLmiRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.112.3.1.1 | not-accessible | A single entry in the table represents a single frMuxLmi component. | |
| ROW frMuxLmiRowStatus | 1.3.6.1.4.1.562.2.4.1.112.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of frMuxLmi components. These components cannot be added nor deleted. |
| STR frMuxLmiComponentName | 1.3.6.1.4.1.562.2.4.1.112.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO frMuxLmiStorageType | 1.3.6.1.4.1.562.2.4.1.112.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the frMuxLmi tables. |
| NON frMuxLmiIndex | 1.3.6.1.4.1.562.2.4.1.112.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the frMuxLmi tables. |
| frMuxLmiProvTable | 1.3.6.1.4.1.562.2.4.1.112.3.10 | not-accessible | This group contains the provisionable attributes of the Local Management Interface component of the FrMux. The Local Management Interface of the FrMux is always User Side Procedure of the User Network Interface (USP-UNI). | |
| frMuxLmiProvEntry | 1.3.6.1.4.1.562.2.4.1.112.3.10.1 | not-accessible | An entry in the frMuxLmiProvTable. | |
| INT frMuxLmiProcedures | 1.3.6.1.4.1.562.2.4.1.112.3.10.1.1 | INTEGER | read-write | This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none : No Local Management Interface procedure is active. vendorForum : Local Management Interface procedure according to the Vendor Forum specification is active. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedure according to the ANSI specification is active. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedure according to the CCITT specification is active. DLCI 0 is used for the LMI protocol. |
| U32 frMuxLmiLinkVerificationTimer | 1.3.6.1.4.1.562.2.4.1.112.3.10.1.2 | Unsigned32 | read-write | This attribute specifies the time interval (in seconds) at which the FrMux sends Status Enquiry messages to the interface. Exchange of Status Enquiry and Status Report messages constitutes a polling cycle, so this attribute may also be interpreted as time interval at which the FrMux initiates polling cycles. It must be less than checkPointTimer (t392) configured at the other end of the Frame Relay interface. This attribute corresponds to t391 of the ANSI and CCITT specifications, and nT1 of the Vendor Forum specification. |
| U32 frMuxLmiFullStatusPollingCycles | 1.3.6.1.4.1.562.2.4.1.112.3.10.1.3 | Unsigned32 | read-write | This attribute specifies every which polling cycle the FrMux sends a full STATUS ENQUIRY to the interface. Every fullStatusPollingCycles polling cycles the FrMux sends a full STATUS ENQUIRY. In all other cycles of a sequence of fullStatusPollingCycles polling cycles the FrMux sends a keep alive STATUS ENQUIRY. This attribute corresponds to n391 of the ANSI and CCITT specifications and nN1 of the Vendor Forum specification. |
| U32 frMuxLmiErrorEventThreshold | 1.3.6.1.4.1.562.2.4.1.112.3.10.1.4 | Unsigned32 | read-write | This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error condition (protocolStatus = errorCondition). The error condition is cleared after eventCount sequential correct events occur (protocolStatus = normalCondition). An event is one of the following: (1) expiry of the linkVerificationTimer (t391), (2) reception of a STATUS message. An error event is one of the following: (1)non-receipt of the STATUS message in t391 seconds, (2)invalid STATUS message, (3) invalid sequence number. This attribute corresponds to n392 of the ANSI and CCITT specifications and nN2 of the Vendor Forum Specification. This attribute must be less than or equal to eventCount. |
| U32 frMuxLmiEventCount | 1.3.6.1.4.1.562.2.4.1.112.3.10.1.5 | Unsigned32 | read-write | This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. This attribute corresponds to n392 of the ANSI and CCITT specifications and nN3 of the Vendor Forum Specification. This attribute must be greater than or equal to errorEventThreshold. |
| frMuxLmiStateTable | 1.3.6.1.4.1.562.2.4.1.112.3.11 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| frMuxLmiStateEntry | 1.3.6.1.4.1.562.2.4.1.112.3.11.1 | not-accessible | An entry in the frMuxLmiStateTable. | |
| INT frMuxLmiAdminState | 1.3.6.1.4.1.562.2.4.1.112.3.11.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT frMuxLmiOperationalState | 1.3.6.1.4.1.562.2.4.1.112.3.11.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT frMuxLmiUsageState | 1.3.6.1.4.1.562.2.4.1.112.3.11.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| frMuxLmiPsiTable | 1.3.6.1.4.1.562.2.4.1.112.3.12 | not-accessible | This group provides the protocol status of the Local Management Interface of this FrMux. | |
| frMuxLmiPsiEntry | 1.3.6.1.4.1.562.2.4.1.112.3.12.1 | not-accessible | An entry in the frMuxLmiPsiTable. | |
| INT frMuxLmiProtocolStatus | 1.3.6.1.4.1.562.2.4.1.112.3.12.1.1 | INTEGER | read-only | This attribute indicates whether the Lmi is in an error condition or whether the protocol is behaving normally. When operating with no LMI protocol (procedures = none), this attribute will always be set to normalCondition. When operating with an LMI protocol (procedures set to one of venforForum, ansi, ccitt), this attribute is set to errorCondition when errorEventThreshold of the last eventCount events are in error. The error condition is cleared when eventCount consecutive good events take place. The consequence of an error condition is that all Dlci's on this interface become disabled and there is no data flow in either direction. |
| frMuxLmiStatsTable | 1.3.6.1.4.1.562.2.4.1.112.3.13 | not-accessible | This group contains the operational statistics for the FrMux Local Management Interface. | |
| frMuxLmiStatsEntry | 1.3.6.1.4.1.562.2.4.1.112.3.13.1 | not-accessible | An entry in the frMuxLmiStatsTable. | |
| C32 frMuxLmiKeepAliveStatusEnqToIf | 1.3.6.1.4.1.562.2.4.1.112.3.13.1.1 | Counter32 | read-only | This attribute counts the number of keep alive STATUS ENQUIRY messages sent to the interface. When the maximum count is reached it wraps to zero. |
| C32 frMuxLmiFullStatusEnqToIf | 1.3.6.1.4.1.562.2.4.1.112.3.13.1.2 | Counter32 | read-only | This attribute counts the number of full STATUS ENQUIRY messages sent to the interface. When the maximum count is reached it wraps to zero. |
| C32 frMuxLmiProtocolErrors | 1.3.6.1.4.1.562.2.4.1.112.3.13.1.3 | Counter32 | read-only | This attribute counts the number of Local Management Interface protocol errors. Protocol errors include (1) protocol message format errors, (2) protocol timer expiry errors, and (3) sequence errors. When the maximum count is reached it wraps to zero. |
| C32 frMuxLmiUnexpectedIes | 1.3.6.1.4.1.562.2.4.1.112.3.13.1.4 | Counter32 | read-only | This attribute counts the number of frames received with an Information Element identifier that is unknown or unexpected. When the maximum count is reached, this counter wraps to zero. |
| C32 frMuxLmiSequenceErrors | 1.3.6.1.4.1.562.2.4.1.112.3.13.1.5 | Counter32 | read-only | This attribute counts the number of Local Management Interface sequence errors. A sequence error is receipt of an LMI message with a receive sequence number not equal to the last send sequence number. When the maximum count is reached the counter wraps to zero. |
| C32 frMuxLmiUnexpectedReports | 1.3.6.1.4.1.562.2.4.1.112.3.13.1.6 | Counter32 | read-only | This attribute counts the number of frames received on the Local Management Interface with an unknown or unexpected report type. When the maximum count is reached the counter wraps to zero. |
| C32 frMuxLmiNoStatusReportCount | 1.3.6.1.4.1.562.2.4.1.112.3.13.1.7 | Counter32 | read-only | This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in two cases: i) after a status enquiry is sent out and t391 timer expires without having a status report received. ii) an invalid status report is received. When the maximum count is reached it wraps to zero. |
| frMuxDlci | 1.3.6.1.4.1.562.2.4.1.112.4 | |||
| frMuxDlciRowStatusTable | 1.3.6.1.4.1.562.2.4.1.112.4.1 | not-accessible | This entry controls the addition and deletion of frMuxDlci components. | |
| frMuxDlciRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.112.4.1.1 | not-accessible | A single entry in the table represents a single frMuxDlci component. | |
| ROW frMuxDlciRowStatus | 1.3.6.1.4.1.562.2.4.1.112.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of frMuxDlci components. These components can be added and deleted. |
| STR frMuxDlciComponentName | 1.3.6.1.4.1.562.2.4.1.112.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO frMuxDlciStorageType | 1.3.6.1.4.1.562.2.4.1.112.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the frMuxDlci tables. |
| I32 frMuxDlciIndex | 1.3.6.1.4.1.562.2.4.1.112.4.1.1.10 | Integer32 | not-accessible | This variable represents the index for the frMuxDlci tables. |
| frMuxDlciApplInfo | 1.3.6.1.4.1.562.2.4.1.112.4.2 | |||
| frMuxDlciApplInfoRowStatusTable | 1.3.6.1.4.1.562.2.4.1.112.4.2.1 | not-accessible | This entry controls the addition and deletion of frMuxDlciApplInfo components. | |
| frMuxDlciApplInfoRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1 | not-accessible | A single entry in the table represents a single frMuxDlciApplInfo component. | |
| ROW frMuxDlciApplInfoRowStatus | 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of frMuxDlciApplInfo components. These components cannot be added nor deleted. |
| STR frMuxDlciApplInfoComponentName | 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO frMuxDlciApplInfoStorageType | 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the frMuxDlciApplInfo tables. |
| NON frMuxDlciApplInfoIndex | 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the frMuxDlciApplInfo tables. |
| frMuxDlciApplInfoProvTable | 1.3.6.1.4.1.562.2.4.1.112.4.2.11 | not-accessible | This group contains provisionable attributes of this Dlci. | |
| frMuxDlciApplInfoProvEntry | 1.3.6.1.4.1.562.2.4.1.112.4.2.11.1 | not-accessible | An entry in the frMuxDlciApplInfoProvTable. | |
| LIN frMuxDlciApplInfoApplicationName | 1.3.6.1.4.1.562.2.4.1.112.4.2.11.1.1 | Link | read-write | This attribute is the link to the application associated with this Dlci. |
| frMuxDlciOperTable | 1.3.6.1.4.1.562.2.4.1.112.4.10 | not-accessible | This group contains the name of the application associated with this Dlci. | |
| frMuxDlciOperEntry | 1.3.6.1.4.1.562.2.4.1.112.4.10.1 | not-accessible | An entry in the frMuxDlciOperTable. | |
| NUM frMuxDlciApplicationName | 1.3.6.1.4.1.562.2.4.1.112.4.10.1.1 | RowPointer | read-only | This attribute contains the name of the application associated with this Dlci. |
| frMuxDlciStateTable | 1.3.6.1.4.1.562.2.4.1.112.4.11 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| frMuxDlciStateEntry | 1.3.6.1.4.1.562.2.4.1.112.4.11.1 | not-accessible | An entry in the frMuxDlciStateTable. | |
| INT frMuxDlciAdminState | 1.3.6.1.4.1.562.2.4.1.112.4.11.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT frMuxDlciOperationalState | 1.3.6.1.4.1.562.2.4.1.112.4.11.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT frMuxDlciUsageState | 1.3.6.1.4.1.562.2.4.1.112.4.11.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| frMuxDlciAbitTable | 1.3.6.1.4.1.562.2.4.1.112.4.12 | not-accessible | This group contains the A-Bit status information for this Dlci. | |
| frMuxDlciAbitEntry | 1.3.6.1.4.1.562.2.4.1.112.4.12.1 | not-accessible | An entry in the frMuxDlciAbitTable. | |
| INT frMuxDlciABitStatusFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.12.1.1 | INTEGER | read-only | This attribute is the most recent A-Bit status received from the interface. |
| frMuxDlciStatsTable | 1.3.6.1.4.1.562.2.4.1.112.4.13 | not-accessible | This group contains the operational statistics for the FrMux Dlci. | |
| frMuxDlciStatsEntry | 1.3.6.1.4.1.562.2.4.1.112.4.13.1 | not-accessible | An entry in the frMuxDlciStatsTable. | |
| C32 frMuxDlciFrmToIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.1 | Counter32 | read-only | This attribute counts the frames sent to the interface. When the maximum count is reached the count wraps to zero. |
| NUM frMuxDlciBytesToIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.2 | PassportCounter64 | read-only | This attribute counts the bytes sent to the interface. When the maximum count is reached the count wraps to zero. |
| C32 frMuxDlciFrmFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.3 | Counter32 | read-only | This attribute counts the frames received from the interface. Frames that are discarded are not included in this count. When the maximum count is reached the count wraps to zero. |
| C32 frMuxDlciDeFrmFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.4 | Counter32 | read-only | This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| NUM frMuxDlciBytesFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.5 | PassportCounter64 | read-only | This attribute counts the bytes received from the interface. Frames that are discarded are not included in this count. When the maximum count is reached the count wraps to zero. |
| NUM frMuxDlciDeBytesFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.6 | PassportCounter64 | read-only | This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero. |
| C32 frMuxDlciFecnFrmToIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.7 | Counter32 | read-only | This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero. |
| C32 frMuxDlciFecnFrmFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.8 | Counter32 | read-only | This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero. |
| C32 frMuxDlciBecnFrmToIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.9 | Counter32 | read-only | This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero. |
| C32 frMuxDlciBecnFrmFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.10 | Counter32 | read-only | This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero. |
| C32 frMuxDlciDiscCongestedFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.11 | Counter32 | read-only | This attribute counts the number of frames discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero. |
| C32 frMuxDlciDiscCongestedFromIfBytes | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.12 | Counter32 | read-only | This attribute counts the number of bytes discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero. |
| C32 frMuxDlciDiscDeCongestedFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.13 | Counter32 | read-only | This attribute counts the number of discard eligible (DE=1) frames discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero. |
| C32 frMuxDlciDiscDeCongestedFromIfBytes | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.14 | Counter32 | read-only | This attribute counts the number of bytes of discard eligible (DE=1) traffic discarded in the receive direction due to local congestion. When the maximum count is reached the count wraps to zero. |
| C32 frMuxDlciErrorShortFrmFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.15 | Counter32 | read-only | This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero. |
| C32 frMuxDlciErrorLongFrmFromIf | 1.3.6.1.4.1.562.2.4.1.112.4.13.1.16 | Counter32 | read-only | This attribute counts the frames received with number of octets in the information field greater than the maximum frame size provisioned in the component pointed to by the applicationName. When the count reaches maximum it wraps to zero. Frames whose lengths are greater than the hardware receive buffer are discarded by the Framer and are therefore not included in this count. |
| frMuxOperStatusTable | 1.3.6.1.4.1.562.2.4.1.112.8 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| frMuxOperStatusEntry | 1.3.6.1.4.1.562.2.4.1.112.8.1 | not-accessible | An entry in the frMuxOperStatusTable. | |
| INT frMuxSnmpOperStatus | 1.3.6.1.4.1.562.2.4.1.112.8.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| frMuxIfEntryTable | 1.3.6.1.4.1.562.2.4.1.112.9 | not-accessible | This group contains the provisionable attributes for the ifEntry. | |
| frMuxIfEntryEntry | 1.3.6.1.4.1.562.2.4.1.112.9.1 | not-accessible | An entry in the frMuxIfEntryTable. | |
| INT frMuxIfAdminStatus | 1.3.6.1.4.1.562.2.4.1.112.9.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed. |
| NUM frMuxIfIndex | 1.3.6.1.4.1.562.2.4.1.112.9.1.2 | InterfaceIndex | read-only | This is the index for the IfEntry. Its value is automatically initialized during the provisioning process. |
| frMuxCidDataTable | 1.3.6.1.4.1.562.2.4.1.112.10 | not-accessible | This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs. | |
| frMuxCidDataEntry | 1.3.6.1.4.1.562.2.4.1.112.10.1 | not-accessible | An entry in the frMuxCidDataTable. | |
| U32 frMuxCustomerIdentifier | 1.3.6.1.4.1.562.2.4.1.112.10.1.1 | Unsigned32 | read-write | This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers. |
| frMuxStateTable | 1.3.6.1.4.1.562.2.4.1.112.11 | not-accessible | This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide. | |
| frMuxStateEntry | 1.3.6.1.4.1.562.2.4.1.112.11.1 | not-accessible | An entry in the frMuxStateTable. | |
| INT frMuxAdminState | 1.3.6.1.4.1.562.2.4.1.112.11.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component. |
| INT frMuxOperationalState | 1.3.6.1.4.1.562.2.4.1.112.11.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component. |
| INT frMuxUsageState | 1.3.6.1.4.1.562.2.4.1.112.11.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component. |
| OCT frMuxAvailabilityStatus | 1.3.6.1.4.1.562.2.4.1.112.11.1.4 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8) |
| OCT frMuxProceduralStatus | 1.3.6.1.4.1.562.2.4.1.112.11.1.5 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4) |
| OCT frMuxControlStatus | 1.3.6.1.4.1.562.2.4.1.112.11.1.6 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3) |
| OCT frMuxAlarmStatus | 1.3.6.1.4.1.562.2.4.1.112.11.1.7 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4) |
| INT frMuxStandbyStatus | 1.3.6.1.4.1.562.2.4.1.112.11.1.8 | INTEGER | read-only | If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource. |
| INT frMuxUnknownStatus | 1.3.6.1.4.1.562.2.4.1.112.11.1.9 | INTEGER | read-only | This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure. |
| frMuxStatsTable | 1.3.6.1.4.1.562.2.4.1.112.12 | not-accessible | This group contains the statistics about the operational behavior of the FrMux at the interface level. | |
| frMuxStatsEntry | 1.3.6.1.4.1.562.2.4.1.112.12.1 | not-accessible | An entry in the frMuxStatsTable. | |
| U32 frMuxLastUnknownDlci | 1.3.6.1.4.1.562.2.4.1.112.12.1.1 | Unsigned32 | read-only | This attribute identifies the most recent DLCI which user frames were received on, for which a Dlci has not been provisioned on the interface. |
| C32 frMuxUnknownDlciFramesFromIf | 1.3.6.1.4.1.562.2.4.1.112.12.1.2 | Counter32 | read-only | This attribute counts frames received from the interface with an unknown DLCI (Dlci which is not provisioned). When the maximum is reached the count wraps to zero. |
| C32 frMuxInvalidHeaderFramesFromIf | 1.3.6.1.4.1.562.2.4.1.112.12.1.3 | Counter32 | read-only | This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero. |
| C32 frMuxTimeFramerCongested | 1.3.6.1.4.1.562.2.4.1.112.12.1.4 | Counter32 | read-only | This attribute accumulates the time (in msec) during which Framer congestion has been observed in the direction towards the interface. The overload causing this statistic to increase may be caused by oversubscription. When this count reaches maximum, it wraps to zero. |
| frameRelayMuxMIB | 1.3.6.1.4.1.562.2.4.2.38 | |||
| frameRelayMuxGroup | 1.3.6.1.4.1.562.2.4.2.38.1 | |||
| frameRelayMuxGroupBE | 1.3.6.1.4.1.562.2.4.2.38.1.5 | |||
| frameRelayMuxGroupBE00 | 1.3.6.1.4.1.562.2.4.2.38.1.5.1 | |||
| frameRelayMuxGroupBE00A | 1.3.6.1.4.1.562.2.4.2.38.1.5.1.2 | |||
| frameRelayMuxCapabilities | 1.3.6.1.4.1.562.2.4.2.38.3 | |||
| frameRelayMuxCapabilitiesBE | 1.3.6.1.4.1.562.2.4.2.38.3.5 | |||
| frameRelayMuxCapabilitiesBE00 | 1.3.6.1.4.1.562.2.4.2.38.3.5.1 | |||
| frameRelayMuxCapabilitiesBE00A | 1.3.6.1.4.1.562.2.4.2.38.3.5.1.2 |
RFC description
Manages Frame Relay Multiplexer/Demultiplexer component used by Nortel Magellan Passport gateways.
Start monitoring Nortel Magellan/MsCarrier Passport wide-area switching platform (Frame Relay multiplexer) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.