Nortel-Magellan-Passport-FrameRelayMuxMIB :: frMuxLmiProcedures

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayMuxMIB › frMuxLmiProcedures

frMuxLmiProcedures

Module: Nortel-Magellan-Passport-FrameRelayMuxMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayMuxMIB::frMuxLmiProcedures

OID (numeric): 1.3.6.1.4.1.562.2.4.1.112.3.10.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none : No Local Management Interface procedure is active. vendorForum : Local Management Interface procedure according to the Vendor Forum specification is active. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedure according to the ANSI specification is active. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedure according to the CCITT specification is active. DLCI 0 is used for the LMI protocol.

What is frMuxLmiProcedures?

Selects which Local Management Interface signaling procedure this FrMux uses to monitor the PVC link: none(0) disables LMI entirely, vendorForum(1) uses DLCI 1023, ansi(2) uses DLCI 0 per the ANSI spec, and ccitt(3) (the default) uses DLCI 0 per the CCITT spec.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.112.3.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayMuxMIB::frMuxLmiProcedures

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.112.3.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayMuxMIB::frMuxLmiProcedures.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.112.3.10.1.1.1 i <value>

Start monitoring Nortel Magellan/MsCarrier Passport wide-area switching platform (Frame Relay multiplexer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayMuxMIB::frMuxLmiProcedures OID value, configure state conditions and alerts, and monitor any Nortel Magellan/MsCarrier Passport wide-area switching platform (Frame Relay multiplexer) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.112frMuxNortel-Magellan-Passport-FrameRelayMuxMIB
1.3.6.1.4.1.562.2.4.1.112.3frMuxLmiNortel-Magellan-Passport-FrameRelayMuxMIB
1.3.6.1.4.1.562.2.4.1.112.3.10frMuxLmiProvTableNortel-Magellan-Passport-FrameRelayMuxMIB
1.3.6.1.4.1.562.2.4.1.112.3.10.1frMuxLmiProvEntryNortel-Magellan-Passport-FrameRelayMuxMIB
1.3.6.1.4.1.562.2.4.1.112.3.10.1.1frMuxLmiProceduresNortel-Magellan-Passport-FrameRelayMuxMIB