| OID symbolic | OID numeric | Type | Access | Description |
|---|
| dpnGateFrAccess | 1.3.6.1.4.1.562.2.4.1.61.4 | | | |
| dpnGateFrAccessRowStatusTable | 1.3.6.1.4.1.562.2.4.1.61.4.1 | | not-accessible | This entry controls the addition and deletion of
dpnGateFrAccess components. |
| dpnGateFrAccessRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.61.4.1.1 | | not-accessible | A single entry in the table represents a single
dpnGateFrAccess component. |
| ROW dpnGateFrAccessRowStatus | 1.3.6.1.4.1.562.2.4.1.61.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of
dpnGateFrAccess components.
These components can be added and deleted. |
| STR dpnGateFrAccessComponentName | 1.3.6.1.4.1.562.2.4.1.61.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO dpnGateFrAccessStorageType | 1.3.6.1.4.1.562.2.4.1.61.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
dpnGateFrAccess tables. |
| NON dpnGateFrAccessIndex | 1.3.6.1.4.1.562.2.4.1.61.4.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the dpnGateFrAccess tables. |
| dpnGateFrAccessFrMuxSetup | 1.3.6.1.4.1.562.2.4.1.61.4.2 | | | |
| dpnGateFrAccessFrMuxSetupRowStatusTable | 1.3.6.1.4.1.562.2.4.1.61.4.2.1 | | not-accessible | This entry controls the addition and deletion of
dpnGateFrAccessFrMuxSetup components. |
| dpnGateFrAccessFrMuxSetupRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.61.4.2.1.1 | | not-accessible | A single entry in the table represents a single
dpnGateFrAccessFrMuxSetup component. |
| ROW dpnGateFrAccessFrMuxSetupRowStatus | 1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of
dpnGateFrAccessFrMuxSetup components.
These components cannot be added nor deleted. |
| STR dpnGateFrAccessFrMuxSetupComponentName | 1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO dpnGateFrAccessFrMuxSetupStorageType | 1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
dpnGateFrAccessFrMuxSetup tables. |
| NON dpnGateFrAccessFrMuxSetupIndex | 1.3.6.1.4.1.562.2.4.1.61.4.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the dpnGateFrAccessFrMuxSetup tables. |
| dpnGateFrAccessFrMuxSetupPvcSetup | 1.3.6.1.4.1.562.2.4.1.61.4.2.2 | | | |
| dpnGateFrAccessFrMuxSetupPvcSetupRowStatusTable | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.1 | | not-accessible | This entry controls the addition and deletion of
dpnGateFrAccessFrMuxSetupPvcSetup components. |
| dpnGateFrAccessFrMuxSetupPvcSetupRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1 | | not-accessible | A single entry in the table represents a single
dpnGateFrAccessFrMuxSetupPvcSetup component. |
| ROW dpnGateFrAccessFrMuxSetupPvcSetupRowStatus | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of
dpnGateFrAccessFrMuxSetupPvcSetup components.
These components cannot be added nor deleted. |
| STR dpnGateFrAccessFrMuxSetupPvcSetupComponentName | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for
use with the ASCII Console Interface |
| STO dpnGateFrAccessFrMuxSetupPvcSetupStorageType | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the
dpnGateFrAccessFrMuxSetupPvcSetup tables. |
| NON dpnGateFrAccessFrMuxSetupPvcSetupIndex | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the dpnGateFrAccessFrMuxSetupPvcSetup tables. |
| dpnGateFrAccessFrMuxSetupPvcSetupProvTable | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.10 | | not-accessible | This group contains provisionable attributes for setting up a Dlci
associated with the application using the FrMuxSetup component.
The Dlci is of the PVC type. |
| dpnGateFrAccessFrMuxSetupPvcSetupProvEntry | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.10.1 | | not-accessible | An entry in the dpnGateFrAccessFrMuxSetupPvcSetupProvTable. |
| LIN dpnGateFrAccessFrMuxSetupPvcSetupDlciName | 1.3.6.1.4.1.562.2.4.1.61.4.2.2.10.1.1 | Link | read-write | This attribute is the link to the Dlci which is associated with the
application using the FrMuxSetup component. |
| dpnGateFrAccessFrMuxSetupTrafficDescrTable | 1.3.6.1.4.1.562.2.4.1.61.4.2.10 | | not-accessible | This group contains the provisionable attributes for the application
of which this FrMuxSetup is a subcomponent. The parameters are
used for maximum frame size checking and traffic shaping and are
to be passed over to FrMux Dlci associated with the application.
The attributes in this group are defined in T1.606 Addendum 1. |
| dpnGateFrAccessFrMuxSetupTrafficDescrEntry | 1.3.6.1.4.1.562.2.4.1.61.4.2.10.1 | | not-accessible | An entry in the dpnGateFrAccessFrMuxSetupTrafficDescrTable. |
| U32 dpnGateFrAccessFrMuxSetupCommittedInformationRate | 1.3.6.1.4.1.562.2.4.1.61.4.2.10.1.1 | Unsigned32 | read-write | This attribute specifies, in bit/s, the committed information rate
(CIR) to which the traffic transmitted towards the interface is
shaped. The minimum value is 4800 bit/s. |
| U32 dpnGateFrAccessFrMuxSetupCommittedBurstSize | 1.3.6.1.4.1.562.2.4.1.61.4.2.10.1.2 | Unsigned32 | read-write | THIS ATTRIBUTE IS NOT BEING USED. |
| U32 dpnGateFrAccessFrMuxSetupMaximumFrameSize | 1.3.6.1.4.1.562.2.4.1.61.4.2.10.1.3 | Unsigned32 | read-write | This attribute specifies the maximum number of octets which may
be included in the information field. The frame relay header and
CRC octets are not included in this definition. This attribute
corresponds to the dN1 parameter described in the Vendor Forum
Specification. |
| dpnGateFrAccessFrMuxSetupDlciCompNameOpTable | 1.3.6.1.4.1.562.2.4.1.61.4.2.11 | | not-accessible | This group contains the component name of the Dlci which carries
the traffic for this application. |
| dpnGateFrAccessFrMuxSetupDlciCompNameOpEntry | 1.3.6.1.4.1.562.2.4.1.61.4.2.11.1 | | not-accessible | An entry in the dpnGateFrAccessFrMuxSetupDlciCompNameOpTable. |
| NUM dpnGateFrAccessFrMuxSetupDlciCompName | 1.3.6.1.4.1.562.2.4.1.61.4.2.11.1.1 | RowPointer | read-only | This attribute specifies the component name of the Dlci with which
the application using this FrMuxSetup component is associated. The
name is a string FrMux/n Dlci/m. For a PVC this is the same
component name as provisioned under the subcomponent
FrMuxPvcSetup. |
| dpnGateFrAccessProvTable | 1.3.6.1.4.1.562.2.4.1.61.4.10 | | not-accessible | This group of provisionable attributes contains the parameters used
by Unacknowledged, Utp, and FrAccess for monitoring link quality. |
| dpnGateFrAccessProvEntry | 1.3.6.1.4.1.562.2.4.1.61.4.10.1 | | not-accessible | An entry in the dpnGateFrAccessProvTable. |
| U32 dpnGateFrAccessMaximumErroredInterval | 1.3.6.1.4.1.562.2.4.1.61.4.10.1.1 | Unsigned32 | read-write | This attribute specifies the interval time over which the error
threshold (as specified by receiveErrorSensitivity) must be
continuously exceeded before the Unacknowledged, Utp, or
FrAccess component can be degraded. Once the error interval count
exceeds the provisioned value, the Unacknowledged, Utp, or
FrAccess component issues an alarm indicating that link quality has
degraded, and it disables its parent component. The exception to
this is a value of zero, the default, which indicates that the
mechanism is completely disabled. |
| U32 dpnGateFrAccessReceiveErrorSensitivity | 1.3.6.1.4.1.562.2.4.1.61.4.10.1.2 | Unsigned32 | read-write | This attribute is the allowable error rate beyond which the
Unacknowledged, Utp, or FrAccess component can be degraded if it
persists for a duration longer than the maximumErrorInterval. The
threshold is expressed as a percentage of number of errored frames
in the last interval per number of frames received in the last interval.
The exception to this is a value of zero, which indicates that the
mechanism is completely disabled. The configurable values are:
0 = the mechanism is completely disabled
1 = 1/(2**1)
2 = 1/(2**2)
3 = 1/(2**3)
:
10 = 1/(2**10) |
| dpnGateFrAccessStateTable | 1.3.6.1.4.1.562.2.4.1.61.4.11 | | not-accessible | This group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. |
| dpnGateFrAccessStateEntry | 1.3.6.1.4.1.562.2.4.1.61.4.11.1 | | not-accessible | An entry in the dpnGateFrAccessStateTable. |
| INT dpnGateFrAccessAdminState | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component. |
| INT dpnGateFrAccessOperationalState | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component. |
| INT dpnGateFrAccessUsageState | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component. |
| OCT dpnGateFrAccessAvailabilityStatus | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.4 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8) |
| OCT dpnGateFrAccessProceduralStatus | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.5 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4) |
| OCT dpnGateFrAccessControlStatus | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.6 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3) |
| OCT dpnGateFrAccessAlarmStatus | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.7 | OCTET STRING | read-only | If supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4) |
| INT dpnGateFrAccessStandbyStatus | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.8 | INTEGER | read-only | If supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource. |
| INT dpnGateFrAccessUnknownStatus | 1.3.6.1.4.1.562.2.4.1.61.4.11.1.9 | INTEGER | read-only | This attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure. |
| dpnGateFrAccessOpTable | 1.3.6.1.4.1.562.2.4.1.61.4.12 | | not-accessible | This group of attributes contains the set of LTP operational
parameters measured and maintained by this component. |
| dpnGateFrAccessOpEntry | 1.3.6.1.4.1.562.2.4.1.61.4.12.1 | | not-accessible | An entry in the dpnGateFrAccessOpTable. |
| G32 dpnGateFrAccessRoundTripDelay | 1.3.6.1.4.1.562.2.4.1.61.4.12.1.1 | Gauge32 | read-only | This is the measured Round Trip Delay (ms) discovered with the
remote through the LTP staging protocol. The value includes
emission, propagation, and queuing delays. A 2 byte control frame
is used to perform the measurement. A value of zero is displayed
when the link is disabled or the measured Round Trip Delay is
unknown. |
| dpnGateFrAccessStatsTable | 1.3.6.1.4.1.562.2.4.1.61.4.13 | | not-accessible | This group contains the operational statistics for FrAccess. |
| dpnGateFrAccessStatsEntry | 1.3.6.1.4.1.562.2.4.1.61.4.13.1 | | not-accessible | An entry in the dpnGateFrAccessStatsTable. |
| C32 dpnGateFrAccessReceivedBytesFromIf | 1.3.6.1.4.1.562.2.4.1.61.4.13.1.1 | Counter32 | read-only | This attribute counts the number of bytes received by FrAccess in
information frames. When the maximum count is reached the count
wraps to zero. |
| C32 dpnGateFrAccessLostFramesFromIf | 1.3.6.1.4.1.562.2.4.1.61.4.13.1.2 | Counter32 | read-only | This attribute counts the frames lost in the direction from interface,
the loss of which is detected based on the sequence number
mechanism. The reason for a loss may be the congestion-related
loss in the external frame relay network, or errors/congestion
developing in the FrMux service. When FrMux statistics do not
show errors/congestion developing internally in FrMux, then the
losses visible through this statistic should be attributed to the
external frame relay network. When the maximum count is reached
the count wraps to zero. |
| C32 dpnGateFrAccessDiscardBadFromIf | 1.3.6.1.4.1.562.2.4.1.61.4.13.1.3 | Counter32 | read-only | This attribute counts the number of frames discarded in the
direction 'from interface', because they are unknown to the
FrAccess protocol. When the maximum count is reached the count
wraps to zero. |
| C32 dpnGateFrAccessDiscardExcessToIf | 1.3.6.1.4.1.562.2.4.1.61.4.13.1.4 | Counter32 | read-only | This attribute counts the number of frames discarded in the
direction 'to interface' because of congestion on the transmit queue.
When the maximum count is reached the count wraps to zero. |
| fraDpnTrunksMIB | 1.3.6.1.4.1.562.2.4.2.68 | | | |
| fraDpnTrunksGroup | 1.3.6.1.4.1.562.2.4.2.68.1 | | | |
| fraDpnTrunksGroupBE | 1.3.6.1.4.1.562.2.4.2.68.1.5 | | | |
| fraDpnTrunksGroupBE00 | 1.3.6.1.4.1.562.2.4.2.68.1.5.1 | | | |
| fraDpnTrunksGroupBE00A | 1.3.6.1.4.1.562.2.4.2.68.1.5.1.2 | | | |
| fraDpnTrunksCapabilities | 1.3.6.1.4.1.562.2.4.2.68.3 | | | |
| fraDpnTrunksCapabilitiesBE | 1.3.6.1.4.1.562.2.4.2.68.3.5 | | | |
| fraDpnTrunksCapabilitiesBE00 | 1.3.6.1.4.1.562.2.4.2.68.3.5.1 | | | |
| fraDpnTrunksCapabilitiesBE00A | 1.3.6.1.4.1.562.2.4.2.68.3.5.1.2 | | | |
