NNCFRINTSTATISTICS-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NNCFRINTSTATISTICS-MIB

Organization: Newbridge Networks Corporation

Last Updated: 1998-03-03

Category: Frame Relay

Description: Monitors Newbridge Networks Frame Relay interface statistics including frame counts and discard rates.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NNCFRINTSTATISTICS-MIB?

NNCFRINTSTATISTICS-MIB is a Newbridge Networks MIB providing performance monitoring statistics for Frame Relay interface streams, tracking frame-level traffic and error counters on Frame Relay circuits. It exposes operational performance data such as frames sent/received, discarded frames, and error counts, typically organized into interval-based reporting tables similar to other Newbridge statistics MIBs. Its monitoring value is on the software/link-layer status of Frame Relay service, letting administrators detect congestion (via discard counts) or line-quality problems on Frame Relay circuits that could degrade customer traffic. It parallels the concepts found in the standard Frame Relay DTE/DCE interface MIB (RFC 2115) though implemented as a Newbridge-proprietary extension. It is typically deployed on Newbridge Networks Frame Relay access or switching equipment, and the NNCFRINTSTATISTICS-MIB MIB is the source administrators consult for per-circuit frame and discard counters on that gear.

IPNetwork Monitor allows you to monitor SNMP objects defined in NNCFRINTSTATISTICS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Newbridge Networks Frame Relay access/switching device

Monitoring Examples

No specific object or table names were captured for this MIB, so a concrete example cannot cite real identifiers; based on the description, an administrator would poll a Frame Relay stream statistics table for frame discard counts over a reporting interval. A rising discard count on a given Frame Relay PVC would reveal congestion or a committed information rate (CIR) violation on that circuit. This should be treated as a general characterization given the absence of sample objects.

What Can Be Monitored

  • frames sent/received
  • frame discard counts
  • Frame Relay stream error counts
Imported Objects

From IF-MIB

ifIndexOBJECT-TYPE

From NNC-INTERVAL-STATISTICS-TC-MIB

NncExtIntvlStateType

From NNCGNI0001-SMI

NncExtCounter64
nncExtensionsOBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using nncFrStrStatCurrentStSCAlarms OID:

Select a Newbridge Networks Frame Relay access/switching device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type nncFrStrStatCurrentStSCAlarms into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of one second intervals for which the stream entered the severely congested state. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Provides performance monitoring and interval statistics for Frame Relay streams and PVC endpoint statistics on Newbridge equipment.

Start monitoring Newbridge Networks Frame Relay access/switching device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NNCFRINTSTATISTICS-MIB