All MIBs › Nortel-Magellan-Passport-BaseRoutingMIB › rtgTandemTraffic
rtgTandemTraffic
Module: Nortel-Magellan-Passport-BaseRoutingMIB
OID (symbolic): Nortel-Magellan-Passport-BaseRoutingMIB::rtgTandemTraffic
OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.12.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether tandem traffic is permitted through the node.
Tandem traffic is traffic which arrives at the node on a trunk and leaves the node on a trunk. Traffic to or from a gateway (internal or external) is not affected by the setting of this attribute.
The default value of this attribute is allowed, which permits tandem traffic to be routed through the node. When this attribute is set to denied, DPN, VNS, and PORS traffic are not permitted to tandem through the node.
Changing this attribute has no effect on PORS calls which were set up before the change. These calls can be manually forced to reroute using the new setting by clearing the calls or locking the trunks on which they are routed.
What is rtgTandemTraffic?
Controls whether this node will carry tandem traffic -- traffic that both arrives and leaves on trunks, as opposed to traffic to/from a local gateway. Setting it to denied(1) stops DPN, VNS, and PORS traffic from tandeming through the node going forward, though existing PORS calls keep routing on their current path until manually cleared or the trunk is locked; the default is allowed(0).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.12.1.1 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-BaseRoutingMIB::rtgTandemTraffic
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.12.1.1.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-BaseRoutingMIB::rtgTandemTraffic.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.12.1.1.1 i <value>
Start monitoring Nortel Magellan Passport WAN switch (base IP routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-BaseRoutingMIB::rtgTandemTraffic OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (base IP routing) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.40 | rtg | Nortel-Magellan-Passport-BaseRoutingMIB |
| 1.3.6.1.4.1.562.2.4.1.40.12 | rtgProvTable | Nortel-Magellan-Passport-BaseRoutingMIB |
| 1.3.6.1.4.1.562.2.4.1.40.12.1 | rtgProvEntry | Nortel-Magellan-Passport-BaseRoutingMIB |
| 1.3.6.1.4.1.562.2.4.1.40.12.1.1 | rtgTandemTraffic | Nortel-Magellan-Passport-BaseRoutingMIB |