NetWare-Server-MIB

All MIBs › NetWare-Server-MIB

Category: Storage

Description: Monitors Novell NetWare server performance, connection counts, volume utilization, and service availability.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NetWare-Server-MIB?

NetWare-Server-MIB is a vendor-specific MIB for monitoring Novell NetWare file/print servers, a legacy network operating system platform widely used for enterprise file and print services. It exposes data across server performance counters, active connection counts, NetWare volume (disk) utilization, and the availability status of NetWare services such as file, print, and directory services. This is squarely a hardware/software status MIB for the server: it lets an administrator monitor server load and performance, how many clients are connected, how full each NetWare volume is, and whether core NetWare services are running or have failed -- key indicators of overall server health. It is a self-contained proprietary Novell MIB, though servers exposing it typically also support the standard HOST-RESOURCES-MIB and generic system MIBs for OS-level statistics. It is typically deployed in enterprise environments running Novell NetWare file/print servers, primarily in legacy IT infrastructures that have not fully migrated to Windows or Linux-based file services. Engineers can download the NetWare-Server-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NetWare-Server-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Novell NetWare file/print server

Monitoring Examples

No sample objects were provided for this module. Based on its description, an administrator would typically poll volume-utilization objects to catch a NetWare volume nearing capacity, monitor active connection counts to gauge server load, and check service-availability status to detect a failed file or print service, though specific object names cannot be cited here.

What Can Be Monitored

server performance/load
active connection count
NetWare volume utilization
file/print/directory service availability

Imported Objects

From HOST-RESOURCES-MIB

InternationalDisplayString
KBytes

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks
enterprises

From SNMPv2-TC

DateAndTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
novell	1.3.6.1.4.1.23
mibDoc	1.3.6.1.4.1.23.2
nwServer	1.3.6.1.4.1.23.2.28
nwSystem	1.3.6.1.4.1.23.2.28.1
NUM nwSysServerName	1.3.6.1.4.1.23.2.28.1.1	InternationalDisplayString	read-only	The physical name of this NetWare server.
NUM nwSysSerialNumber	1.3.6.1.4.1.23.2.28.1.2	InternationalDisplayString	read-only	The serial number of the instance of the NetWare Operating System running on this server.
IPX nwSysInternalNetNum	1.3.6.1.4.1.23.2.28.1.3	IPXNetNumber	read-only	The internal IPX network number of this server.
TIK nwSysServerUpTime	1.3.6.1.4.1.23.2.28.1.4	TimeTicks	read-only	The time (in hundredths of a second) since this server was last restarted.
INT nwSysOSSFTLevel	1.3.6.1.4.1.23.2.28.1.5	INTEGER	read-only	The System Fault Tolerance Level of the NetWare Operating System running on this server.
INT nwSysOSMajorVer	1.3.6.1.4.1.23.2.28.1.6	INTEGER	read-only	The major version number of the NetWare Operating System running on this server.
INT nwSysOSMinorVer	1.3.6.1.4.1.23.2.28.1.7	INTEGER	read-only	The minor version number of the NetWare Operating System running on this server.
DAT nwSysOSReleaseDate	1.3.6.1.4.1.23.2.28.1.8	DateAndTime	read-only	The release date of the NetWare Operating System running on this server.
NUM nwSysOSDescription	1.3.6.1.4.1.23.2.28.1.9	InternationalDisplayString	read-only	A textual description of the NetWare Operating System running on this server.
NUM nwSysOSCopyright	1.3.6.1.4.1.23.2.28.1.10	InternationalDisplayString	read-only	The copyright string for the NetWare Operating System running on this server.
DAT nwSysTime	1.3.6.1.4.1.23.2.28.1.11	DateAndTime	read-write	The date and time kept by this server.
NUM nwSysTimeZone	1.3.6.1.4.1.23.2.28.1.12	InternationalDisplayString	read-write	The time zone in which this server resides. The string is in the same format as in the NetWare 'SET TIMEZONE' command.
INT nwSysLoginState	1.3.6.1.4.1.23.2.28.1.13	INTEGER	read-write	The current login state of this Server.
INT nwSysLanguageID	1.3.6.1.4.1.23.2.28.1.14	INTEGER	read-only	The national language in use on this server.
NUM nwSysNMASerialNumber	1.3.6.1.4.1.23.2.28.1.15	InternationalDisplayString	read-only	The serial number of the instance of the NetWare Management Agent running on this server. Or, a zero-length string if not applicable.
INT nwSysNMACopiesAllowed	1.3.6.1.4.1.23.2.28.1.16	INTEGER	read-only	The maximum number of instances of the NMA with this serial number allowed by the license agreement. A value of 0 implies no limit.
NUM nwSysDirectoryTree	1.3.6.1.4.1.23.2.28.1.17	InternationalDisplayString	read-only	The name of the NetWare directory services tree containing this server. Or, a zero-length string if not applicable.
NUM nwSysBinderyContext	1.3.6.1.4.1.23.2.28.1.18	InternationalDisplayString	read-only	The container object(s) where the bindery services context(s) is set. Or, a zero-length string if not applicable.
NUM nwSysServerDSName	1.3.6.1.4.1.23.2.28.1.19	InternationalDisplayString	read-only	The Directory Services full distinguished name of this NetWare server, or the zero-length string if not applicable.
DST nwSysDaylightSavingsStart	1.3.6.1.4.1.23.2.28.1.20	DSTType	read-only	Start of daylight savings time. A language independent representation of the local date and time when the switch to Daylight Savings Time occurs on the server.
DST nwSysDaylightSavingsEnd	1.3.6.1.4.1.23.2.28.1.21	DSTType	read-only	End of daylight savings time. A language independent representation of the local date and time when the switch from Daylight Savings Time occurs on the server.
INT nwSysDaylightSavingsOffset	1.3.6.1.4.1.23.2.28.1.22	INTEGER	read-only	The offset applied in time calculations when daylight savings is in effect. This is a signed quantity, and the units are seconds.
INT nwSysDaylightSavingsStatus	1.3.6.1.4.1.23.2.28.1.23	INTEGER	read-only	Indicates whether daylight savings time is applicable or not.
nwFileSystem	1.3.6.1.4.1.23.2.28.2
CTR nwFSReads	1.3.6.1.4.1.23.2.28.2.1	Counter	read-only	The total number of file reads the file system has made since this server was started. This value provides a relative measure of server activity.
CTR nwFSWrites	1.3.6.1.4.1.23.2.28.2.2	Counter	read-only	The total number of file writes the file system has made since this server was started. This value provides a relative measure of server activity.
CTR nwFSReadKBytes	1.3.6.1.4.1.23.2.28.2.3	Counter	read-only	The total number of KBytes read by the file system. This value provides a measure of server activity.
CTR nwFSWrittenKBytes	1.3.6.1.4.1.23.2.28.2.4	Counter	read-only	The total number of KBytes written by the file system. This value provides a measure of server activity.
CTR nwFSCacheChecks	1.3.6.1.4.1.23.2.28.2.5	Counter	read-only	The total number of checks that have been made against the file cache.
CTR nwFSCacheHits	1.3.6.1.4.1.23.2.28.2.6	Counter	read-only	The total number of times a file cache check has resulted in a hit.
INT nwFSOpenFiles	1.3.6.1.4.1.23.2.28.2.7	INTEGER	read-only	The number of open files in the file system.
INT nwFSMaxOpenFiles	1.3.6.1.4.1.23.2.28.2.8	INTEGER	read-only	The maximum number of open files allowed in the file system.
INT nwFSRecordLocks	1.3.6.1.4.1.23.2.28.2.9	INTEGER	read-only	The current number of record locks.
INT nwFSMaxRecordLocks	1.3.6.1.4.1.23.2.28.2.10	INTEGER	read-only	The maximum number of record locks allowed.
INT nwFSMaxSubdirectoryTreeDepth	1.3.6.1.4.1.23.2.28.2.11	INTEGER	read-only	The number of levels of subdirectories the OS supports.
INT nwFSMaxPercentOfVolumeUsedByDir	1.3.6.1.4.1.23.2.28.2.12	INTEGER	read-only	The percentage of a volume that may be used as directory space.
INT nwFSVolCount	1.3.6.1.4.1.23.2.28.2.13	INTEGER	read-only	The number of volumes listed in the volume table
nwFSVolTable	1.3.6.1.4.1.23.2.28.2.14		not-accessible	The volume table lists all the NetWare volumes, whether mounted or not ( see nwVolMounted for more details).
nwFSVolEntry	1.3.6.1.4.1.23.2.28.2.14.1		not-accessible	An entry in the volume table describing a single NetWare Volume
INT nwVolID	1.3.6.1.4.1.23.2.28.2.14.1.1	INTEGER	read-only	A unique value for each NetWare volume on the server. The value for each volume must remain constant at least from one re-initialization of the agent to the next re- initialization.
NUM nwVolPhysicalName	1.3.6.1.4.1.23.2.28.2.14.1.2	InternationalDisplayString	read-only	The name of the physical volume (as opposed to any Directory Services (DS) name.
KBY nwVolSize	1.3.6.1.4.1.23.2.28.2.14.1.3	KBytes	read-only	The size of the volume in KBytes.
KBY nwVolFree	1.3.6.1.4.1.23.2.28.2.14.1.4	KBytes	read-only	The free space on the volume in KBytes. As this number approaches zero, the volume is running out of space for new or expanding files.
KBY nwVolFreeable	1.3.6.1.4.1.23.2.28.2.14.1.5	KBytes	read-only	The amount of freeable space (in KBytes) being used by previously deleted files on this volume. The freeable space can be reclaimed as free space by purging deleted files.
KBY nwVolNonFreeable	1.3.6.1.4.1.23.2.28.2.14.1.6	KBytes	read-only	The non-freeable space (in KBytes) on the volume. This is the space being used by deleted files that cannot be purged. Non-freeable space can be reclaimed as free space when the deleted files become eligible to be purged.
INT nwVolBlockSize	1.3.6.1.4.1.23.2.28.2.14.1.7	INTEGER	read-only	The block size on the volume in bytes.
INT nwVolMounted	1.3.6.1.4.1.23.2.28.2.14.1.8	INTEGER	read-write	The mount state of the volume. Note that if the volume is not mounted, all the other values in the table, except nwVolName, are invalid. Writing a value of mounted(1) to this object will cause the volume to be mounted if it is currently dismounted. Writing a value of dismounted(2) to this object will cause the volume to be dismounted if the volume is currently mounted.
INT nwVolAttributes	1.3.6.1.4.1.23.2.28.2.14.1.9	INTEGER	read-only	A value that represents the attributes of the volume. The value is a sum. This value initially takes the value zero, then for each attribute that is enabled on the volume, 2 raised to a power is added to the sum. The powers are according to the following table: Attribute Power Block Suballocation 0 File Compression 1 Data Migration 2 Auditing 3 Read Only 4 For example, a read-only volume with suballocation enabled would have a value of 17 (24 + 20).
INT nwVolNameSpaces	1.3.6.1.4.1.23.2.28.2.14.1.10	INTEGER	read-only	A value representing all the name spaces supported by this volume. The value is a sum. This value initially takes the value zero, then for each name space that is supported by the volume, 2 raised to a power is added to the sum. The powers are according to the following table: Name Space Power DOS 0 MAC 1 NFS 2 FTAM 3 OS/2 4 NT 5 For example, a volume supporting both the DOS and MAC name spaces would have a value of 3 (20 + 21).
INT nwVolTotalDirEntries	1.3.6.1.4.1.23.2.28.2.14.1.11	INTEGER	read-only	The total number of directory table entries available on this volume.
INT nwVolUsedDirEntries	1.3.6.1.4.1.23.2.28.2.14.1.12	INTEGER	read-only	The number of directory table entries that are currently being used on this volume.
INT nwVolSegmentCount	1.3.6.1.4.1.23.2.28.2.14.1.13	INTEGER	read-only	The number of segments comprising this volume.
NUM nwVolDSName	1.3.6.1.4.1.23.2.28.2.14.1.14	InternationalDisplayString	read-only	The full Directory Services distinguished name for the volume, or the zero-length string if not applicable.
INT nwVolFileSystemID	1.3.6.1.4.1.23.2.28.2.14.1.15	INTEGER	read-only	The type of the file system on the volume.
NUM nwVolFileSystemName	1.3.6.1.4.1.23.2.28.2.14.1.16	InternationalDisplayString	read-only	If remote, the remote mount point; e.g. va:/usr/x If local, the zero length string.
nwFSOpenFileTable	1.3.6.1.4.1.23.2.28.2.15		not-accessible	A table of all open files on the server. If a file is opened by more than one connection, multiple entries for the same file will appear in the table.
nwFSOpenFileEntry	1.3.6.1.4.1.23.2.28.2.15.1		not-accessible	An entry in the Open File table providing information about a single open file.
INT nwOfileVolID	1.3.6.1.4.1.23.2.28.2.15.1.1	INTEGER	read-only	A number that uniquely identifies a NetWare volume. The value of this object for a particular volume has the same value as the nwVolID object for the same volume.
INT nwOfileDirectoryNumber	1.3.6.1.4.1.23.2.28.2.15.1.2	INTEGER	read-only	A number that uniquely identifies an open file within a NetWare volume.
INT nwOfileConnection	1.3.6.1.4.1.23.2.28.2.15.1.3	INTEGER	read-only	The number of the connection that opened the file.
NUM nwOfileVolumeName	1.3.6.1.4.1.23.2.28.2.15.1.4	InternationalDisplayString	read-only	The physical name of the NetWare volume containing the open file.
NUM nwOfileName	1.3.6.1.4.1.23.2.28.2.15.1.5	InternationalDisplayString	read-only	The name of the open file including the directory path.
NUM nwOfileLoginName	1.3.6.1.4.1.23.2.28.2.15.1.6	InternationalDisplayString	read-only	The name of the user (if any) who opened the file. If the file was opened by the system or by an NLM, etc., nwOfileLoginName will be the zero-length string.
nwUsers	1.3.6.1.4.1.23.2.28.3
INT nwUserCount	1.3.6.1.4.1.23.2.28.3.1	INTEGER	read-only	The number of entries in the User Account Table.
INT nwLoginCount	1.3.6.1.4.1.23.2.28.3.2	INTEGER	read-only	The number of licensed connections (logins) in this file server.
INT nwMaxLogins	1.3.6.1.4.1.23.2.28.3.3	INTEGER	read-only	The maximum number of licensed connections (logins) supported by this file server. Zero if unlimited.
INT nwConnectionCount	1.3.6.1.4.1.23.2.28.3.4	INTEGER	read-only	The number of entries in the Connection Table. The current number of connections to this file server(including connection 0 (zero), the system connection).
INT nwPeakRemoteConnections	1.3.6.1.4.1.23.2.28.3.5	INTEGER	read-only	The peak number of remote stations that have simultaneously connected to this server. Note that this number does not include connections made by the server itself, nor NLMs running on the server.
INT nwMaxConnections	1.3.6.1.4.1.23.2.28.3.6	INTEGER	read-only	The maximum number of connections supported by this file server. Zero if unlimited.
INT nwNLMConnections	1.3.6.1.4.1.23.2.28.3.7	INTEGER	read-only	The current number of logged in connections used by the system.
nwConnectionTable	1.3.6.1.4.1.23.2.28.3.8		not-accessible	The Connection Table lists all connections used; including those by Workstations, NLMs, and Attachments. Connection 0 (zero) is used by the system.
nwConnectionEntry	1.3.6.1.4.1.23.2.28.3.8.1		not-accessible	An entry in the connections table provides information about a single connection
INT nwConnectionNumber	1.3.6.1.4.1.23.2.28.3.8.1.1	INTEGER	read-only	The connection number. Connection 0 (zero) is used by the system.
NUM nwConnectionLoginName	1.3.6.1.4.1.23.2.28.3.8.1.2	InternationalDisplayString	read-only	The login name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
TRA nwConnectionTransportDomain	1.3.6.1.4.1.23.2.28.3.8.1.3	TransportDomain	read-only	The transport domain of the connection.
ADR nwConnectionTransportAddress	1.3.6.1.4.1.23.2.28.3.8.1.4	TransportAddress	read-only	The transport address of the connection.
DAT nwConnectionTime	1.3.6.1.4.1.23.2.28.3.8.1.5	DateAndTime	read-only	The date and time the connection was established.
CTR nwConnectionReadKBytes	1.3.6.1.4.1.23.2.28.3.8.1.6	Counter	read-only	The number of KBytes the connection has read since it was established.
CTR nwConnectionWrittenKBytes	1.3.6.1.4.1.23.2.28.3.8.1.7	Counter	read-only	The number of KBytes the connection has written since it was established.
CTR nwConnectionNcpRequests	1.3.6.1.4.1.23.2.28.3.8.1.8	Counter	read-only	The number of NCP Requests the connection has made since it was established.
INT nwConnectionFilesOpen	1.3.6.1.4.1.23.2.28.3.8.1.9	INTEGER	read-only	The number of files that are currently opened by the connection.
INT nwConnectionRecordsLocked	1.3.6.1.4.1.23.2.28.3.8.1.10	INTEGER	read-only	The number of file records that are currently locked by the connection.
INT nwConnectionPrivilege	1.3.6.1.4.1.23.2.28.3.8.1.11	INTEGER	read-only	A value that represents the connection's login privileges. The value is a sum. This value initially takes the value zero, then for each privilege that the connection has, 2 raised to a power is added to the sum. The powers are according to the following table: Privilege Power Supervisor 0 Operator 1 Auditor 2 High_Privilege 3 Second_Authentication 4 Second_High_Privilege 5 For example, a user with both Supervisor and Auditor privileges would have a value of 5 (20 + 22)
INT nwConnectionStatus	1.3.6.1.4.1.23.2.28.3.8.1.12	INTEGER	read-only	A value that represents the login status of the user. The value is a sum. This value initially takes the value zero, then for each status that the user has, 2 raised to a power is added to the sum. The powers are according to the following table: Status Power Not logged in 0 Logged in 1 Need security change 2 MacStation 3 Connection abort 4 Audited 5 Authenticated temporary 6 Audit connection recorded 7 DS audit connection recorded 8 Logout in progress 9 For example a logged in user who needs a security change would have a value of 6 (21 + 22).
nwQueue	1.3.6.1.4.1.23.2.28.4
INT nwQueueCount	1.3.6.1.4.1.23.2.28.4.1	INTEGER	read-only	The number of active queues on this server.
nwQueueTable	1.3.6.1.4.1.23.2.28.4.2		not-accessible	The Queue table lists all the active NetWare queues including: print, job and archive queues on this server.
nwQueueEntry	1.3.6.1.4.1.23.2.28.4.2.1		not-accessible	An entry in the Queue table provides information about a single NetWare queue.
INT nwQID	1.3.6.1.4.1.23.2.28.4.2.1.1	INTEGER	read-only	A unique value for each NetWare queue on the server. The value for each queue must remain constant at least from one re-initialization of the agent to the next re- initialization.
NUM nwQName	1.3.6.1.4.1.23.2.28.4.2.1.2	InternationalDisplayString	read-only	The queue name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
INT nwQType	1.3.6.1.4.1.23.2.28.4.2.1.3	INTEGER	read-only	The type of the queue.
INT nwQAddJobState	1.3.6.1.4.1.23.2.28.4.2.1.4	INTEGER	read-only	This value indicates whether more jobs can be added to this queue. A value of canAddJobs(1) indicates more jobs can be added. A value of cannotAddJobs(2) indicates more jobs cannot be added.
INT nwQAttachState	1.3.6.1.4.1.23.2.28.4.2.1.5	INTEGER	read-only	This value indicates whether queue servers can attach to this queue. A value of canAttach(1) indicates a queue server can attach. A value of cannotAttach(2) indicates a queue server cannot attach.
INT nwQServiceJobState	1.3.6.1.4.1.23.2.28.4.2.1.6	INTEGER	read-only	This value indicates whether the queue can service jobs. A value of canService(1) indicates that the queue can service jobs. A value of cannotService(2) indicates the queue cannot service jobs.
NUM nwQDirVolName	1.3.6.1.4.1.23.2.28.4.2.1.7	InternationalDisplayString	read-only	The physical name of the volume, where the directory created for this queue resides.
INT nwQNumJobEntries	1.3.6.1.4.1.23.2.28.4.2.1.8	INTEGER	read-only	The number of job entries in the queue.
INT nwQNumAssignedServers	1.3.6.1.4.1.23.2.28.4.2.1.9	INTEGER	read-only	The number of servers assigned to the queue.
nwQueueJobTable	1.3.6.1.4.1.23.2.28.4.3		not-accessible	The Queue Job table lists all the jobs for all the active queues defined on this server QMS creates a file for each job. The name of that file will be Q$XXXX.NNN where XXXX is the last 4 digits of nwQJobQID and NNN is the job number. Therefore the Q Job File name can be calculated and will not be in the table.
nwQueueJobEntry	1.3.6.1.4.1.23.2.28.4.3.1		not-accessible	An entry in the Queue Job table provides information about a particular job in a particular queue.
INT nwQJobQID	1.3.6.1.4.1.23.2.28.4.3.1.1	INTEGER	read-only	A number that uniquely identifies a NetWare queue. The value of this object for a particular queue has the same value as the nwQID object for the same queue.
INT nwQJobNumber	1.3.6.1.4.1.23.2.28.4.3.1.2	INTEGER	read-only	The job number.
NUM nwQJobDescription	1.3.6.1.4.1.23.2.28.4.3.1.3	InternationalDisplayString	read-only	The description of the queue job.
DAT nwQJobEntryDateTime	1.3.6.1.4.1.23.2.28.4.3.1.4	DateAndTime	read-only	The entry date and time.
INT nwQJobPosition	1.3.6.1.4.1.23.2.28.4.3.1.5	INTEGER	read-only	The order in the queue.
INT nwQJobSize	1.3.6.1.4.1.23.2.28.4.3.1.6	INTEGER	read-only	The size of the job file in bytes.
INT nwQJobControlFlags	1.3.6.1.4.1.23.2.28.4.3.1.7	INTEGER	read-only	A value representing the job control flags. The value is a sum. This value initially takes the value zero, then for each job control flag that is set, 2 raised to a power is added to the sum. The powers are according to the following table: 8h Service Auto-Start 10h Execute 20h Entry Open 40h User Hold 80h Operator Hold
NUM nwQJobUserName	1.3.6.1.4.1.23.2.28.4.3.1.8	InternationalDisplayString	read-only	The name of the user who submitted the job (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
NUM nwQJobTargetServerName	1.3.6.1.4.1.23.2.28.4.3.1.9	InternationalDisplayString	read-only	The target server name (Directory Services full distinguished name where appropriate).. The zero length string will be returned for 'Any Server'.
DAT nwQJobTargetDateTime	1.3.6.1.4.1.23.2.28.4.3.1.10	DateAndTime	read-only	The target date and time. When the job is to be printed. A job may be first in queue but may not print because this is set to some other time.
NUM nwQJobServerName	1.3.6.1.4.1.23.2.28.4.3.1.11	InternationalDisplayString	read-only	The server currently processing the job (Directory Services full distinguished name where appropriate).. If the job is not being handled currently, this field will be a zero-length string.
nwQueueServerTable	1.3.6.1.4.1.23.2.28.4.4		not-accessible	The Queue Server Table lists all the assigned servers for all the active NetWare queues on this instrumented server. For each active queue on the server, zero or more entries will exist, one for each server assigned to service that particular queue.
nwQueueServerEntry	1.3.6.1.4.1.23.2.28.4.4.1		not-accessible	An entry in the Queue Server table provides information about the assignment of a particular server to a particular queue.
INT nwQServerQID	1.3.6.1.4.1.23.2.28.4.4.1.1	INTEGER	read-only	A number that uniquely identifies a NetWare queue. The value of this object for a particular queue has the same value as the nwQID object for the same queue.
INT nwQServerID	1.3.6.1.4.1.23.2.28.4.4.1.2	INTEGER	read-only	A unique value for each server servicing this queue. The value for each server must remain constant at least from one re-initialization of the agent to the next re- initialization.
NUM nwQServerName	1.3.6.1.4.1.23.2.28.4.4.1.3	InternationalDisplayString	read-only	The name of a queue server servicing this queue (Directory Services full distinguished name where appropriate). Zero-length string if not applicable..
INT nwQServerStatus	1.3.6.1.4.1.23.2.28.4.4.1.4	INTEGER	read-only	The status of the Queue Server.
nwOdi	1.3.6.1.4.1.23.2.28.5
INT nwOdiLslEnqSendCount	1.3.6.1.4.1.23.2.28.5.1	INTEGER	read-only	The Link Support Layer's Enqueued Send Count, this is the current number of send packets that have been placed in a send queue.
INT nwOdiOsPktRcvBuffer	1.3.6.1.4.1.23.2.28.5.2	INTEGER	read-only	The current number of packet receive buffers being used by the operating system.
INT nwOdiOsMaxPktRcvBuffers	1.3.6.1.4.1.23.2.28.5.3	INTEGER	read-write	The maximum number of packet receive buffers that the operating system can allocate. This object is settable and can also be set through the nwSetParamTable.
INT nwOdiOsMinPktRcvBuffers	1.3.6.1.4.1.23.2.28.5.4	INTEGER	read-only	The minimum number of packet receive buffers that the operating system can allocate. This value can only be changed at startup time from STARTUP.NCF; therefore it is settable only through the nwSetParamTable.
nwSft3	1.3.6.1.4.1.23.2.28.6
ENG nwSft3Engine	1.3.6.1.4.1.23.2.28.6.1	EngineType	read-only	The type of the this engine.
INT nwSft3EngineState	1.3.6.1.4.1.23.2.28.6.2	INTEGER	read-only	The state of this engine. Note the msEngine does not know its state and thus will always be unknown(1).
nwSft3EngineTable	1.3.6.1.4.1.23.2.28.6.3		not-accessible	Information about each engine which comprises an SFT- III server.
nwSft3EngineEntry	1.3.6.1.4.1.23.2.28.6.3.1		not-accessible	Information about a particular engine in an SFT-III server.
ENG nwSft3EngineType	1.3.6.1.4.1.23.2.28.6.3.1.1	EngineType	read-only	The type of the engine.
NUM nwSft3EngineName	1.3.6.1.4.1.23.2.28.6.3.1.2	InternationalDisplayString	read-only	The name of this engine.
IPX nwSft3EngineInternalNetNum	1.3.6.1.4.1.23.2.28.6.3.1.3	IPXNetNumber	read-only	The internal IPX network number of this server.
nwNCP	1.3.6.1.4.1.23.2.28.7
INT nwNCPIPXChecksums	1.3.6.1.4.1.23.2.28.7.1	INTEGER	read-write	Controls NCP IPX checksumming.
INT nwNCPPacketSignatures	1.3.6.1.4.1.23.2.28.7.2	INTEGER	read-only	The security level currently in force on this server.
CTR nwNCPNumNCPReqs	1.3.6.1.4.1.23.2.28.7.3	Counter	read-only	Number of NCP Requests.
INT nwNCPUseCount	1.3.6.1.4.1.23.2.28.7.4	INTEGER	read-only	NCP station in use count.
INT nwNCPPeakUseCount	1.3.6.1.4.1.23.2.28.7.5	INTEGER	read-only	NCP peak station in use count.
CTR nwNCPForgedPkts	1.3.6.1.4.1.23.2.28.7.6	Counter	read-only	The count of NCP requests that were forged packets.
CTR nwNCPBeingProcesseds	1.3.6.1.4.1.23.2.28.7.7	Counter	read-only	The count of NCP requests that were already being processed.
CTR nwNCPNoAvailConns	1.3.6.1.4.1.23.2.28.7.8	Counter	read-only	The count of NCP requests that were not processed because there were no available connections.
CTR nwNCPIPXChecksumErrs	1.3.6.1.4.1.23.2.28.7.9	Counter	read-only	NCP IPX checksum error count.
CTR nwNCPInvalidPacketSigs	1.3.6.1.4.1.23.2.28.7.10	Counter	read-only	NCP invalid packet signature error count.
INT nwNCPExtNumReg	1.3.6.1.4.1.23.2.28.7.11	INTEGER	read-only	Number of NCP extensions Registered.
CTR nwNCPExtInvalidReqs	1.3.6.1.4.1.23.2.28.7.12	Counter	read-only	Invalid NCP Extensions Requests.
nwWatchdog	1.3.6.1.4.1.23.2.28.8
INT nwWDTimeBeforeFirstPkt	1.3.6.1.4.1.23.2.28.8.1	INTEGER	read-write	The time before the first Watchdog Packet in seconds.
SEC nwWDTimeBetweenPkts	1.3.6.1.4.1.23.2.28.8.2	Seconds	read-write	The time between Watchdog Packets in seconds.
INT nwWDNumPktsToSend	1.3.6.1.4.1.23.2.28.8.3	INTEGER	read-write	The number of Watchdog Packets to Send.
INT nwWDCurrentState	1.3.6.1.4.1.23.2.28.8.4	INTEGER	read-only	The current Watchdog State. Note: this is only available in 4.0, will be unknown in 3.11
INT nwWDNotifyConsoleFlag	1.3.6.1.4.1.23.2.28.8.5	INTEGER	read-write	The Watchdog Notify Console Flag.
nwNLM	1.3.6.1.4.1.23.2.28.9
nwNLMTable	1.3.6.1.4.1.23.2.28.9.1		not-accessible	The nwNLMTable augments the hrSWRunTable in the Host Resources MIB to provide additional NetWare specific information.
nwNLMEntry	1.3.6.1.4.1.23.2.28.9.1.1		not-accessible	An entry in the NLM table provides additional information about a particular NLM.
INT nwNLMIndex	1.3.6.1.4.1.23.2.28.9.1.1.1	INTEGER	read-only	A number that uniquely identifies an NLM. The value of this object for a particular NLM has the same value as the hrSWRunIndex object, defined in the HOST- RESOURCES-MIB, for the same NLM.
NUM nwNLMName	1.3.6.1.4.1.23.2.28.9.1.1.2	InternationalDisplayString	read-only	The name of the NLM.
NUM nwNLMDescription	1.3.6.1.4.1.23.2.28.9.1.1.3	InternationalDisplayString	read-only	A text string that describes this NLM.
INT nwNLMTotalMemory	1.3.6.1.4.1.23.2.28.9.1.1.4	INTEGER	read-only	The total memory, in bytes, used by this NLM. This is a composite total of Short Term Memory, Semi-Permanent Memory, and Non-movable Cache Memory allocated by the NLM, plus the sizes of the code and data sections of this instance of an NLM.
NUM nwNLMCopyright	1.3.6.1.4.1.23.2.28.9.1.1.5	InternationalDisplayString	read-only	The copyright string for this NLM.
INT nwNLMProtectionDomain	1.3.6.1.4.1.23.2.28.9.1.1.6	INTEGER	read-only	The protection level at which this NLM is executing.
INT nwNLMMajorVer	1.3.6.1.4.1.23.2.28.9.1.1.7	INTEGER	read-only	The major version number of this NLM.
INT nwNLMMinorVer	1.3.6.1.4.1.23.2.28.9.1.1.8	INTEGER	read-only	The minor version number of this NLM.
INT nwNLMRevision	1.3.6.1.4.1.23.2.28.9.1.1.9	INTEGER	read-only	The revision level of this NLM.
DAT nwNLMReleaseDate	1.3.6.1.4.1.23.2.28.9.1.1.10	DateAndTime	read-only	The date and time this NLM was released
nwSetParams	1.3.6.1.4.1.23.2.28.10
nwSetCategoryTable	1.3.6.1.4.1.23.2.28.10.1		not-accessible	A table of NetWare SET parameter categories
nwSetCategoryEntry	1.3.6.1.4.1.23.2.28.10.1.1		not-accessible	A NetWare SET parameter category
INT nwSetCategoryIndex	1.3.6.1.4.1.23.2.28.10.1.1.1	INTEGER	read-only	A unique value for each category of SET commands
NUM nwSetCategoryName	1.3.6.1.4.1.23.2.28.10.1.1.2	InternationalDisplayString	read-only	A descriptive name of this category of SET commands
nwSetParamTable	1.3.6.1.4.1.23.2.28.10.2		not-accessible	A table of the NetWare SET parameters. This table emulates the NetWare SET command. Note that some of the parameters can also be set through other MIB objects
nwSetParamEntry	1.3.6.1.4.1.23.2.28.10.2.1		not-accessible	An entry in the SET parameter table provides information about a particular parameter.
INT nwSetParamCategoryIndex	1.3.6.1.4.1.23.2.28.10.2.1.1	INTEGER	read-only	A number that uniquely identifies a Set parameter category. The value of this object for a particular category has the same value as the nwSetCategoryIndex object for the same category.
INT nwSetParamIndex	1.3.6.1.4.1.23.2.28.10.2.1.2	INTEGER	read-only	An index which uniquely identifies this set parameter within the category
NUM nwSetParamName	1.3.6.1.4.1.23.2.28.10.2.1.3	InternationalDisplayString	read-only	The name of the settable parameter
INT nwSetParamType	1.3.6.1.4.1.23.2.28.10.2.1.4	INTEGER	read-only	The type of the parameter. All types are integer- valued except 'string', which is string-valued. number: integer boolean: 0 == FALSE, non-zero == TRUE ticks: 1 tick == 3600/65535 == approx 55 millisecs blockShift: integer timeOffset: [+\|-]hh:mm:ss converted to seconds string: character string trigger: integer
INT nwSetParamValueInteger	1.3.6.1.4.1.23.2.28.10.2.1.5	INTEGER	read-write	The current value of the parameter if integer-valued. Zero otherwise.
NUM nwSetParamValueString	1.3.6.1.4.1.23.2.28.10.2.1.6	InternationalDisplayString	read-write	The current value of the parameter if string-valued. The zero-length string otherwise.
INT nwSetParamLowerLimit	1.3.6.1.4.1.23.2.28.10.2.1.7	INTEGER	read-only	The lower limit of the parameter if integer-valued.
INT nwSetParamUpperLimit	1.3.6.1.4.1.23.2.28.10.2.1.8	INTEGER	read-only	The upper limit of the parameter if integer-valued. The maximum length of the string if string-valued.
INT nwSetParamDescrLength	1.3.6.1.4.1.23.2.28.10.2.1.9	INTEGER	read-only	The total length (in octets) of the parameter description string, which can be retrieved in segments from the nwSetDescrTable.
INT nwSetParamMode	1.3.6.1.4.1.23.2.28.10.2.1.10	INTEGER	read-write	A value defining how and when the command takes effect. The value is a sum. This value initially takes the value zero, then for each place the parameter can be set from, 2 raised to a power is added to the sum. The powers are according to the following table: Set From Power Console 0 AUTOEXEC.NCF 1 STARTUP.NCF 2 For example, a parameter that can be set from either the console or AUTOEXEC would have a value of 3 (20 + 21). On a read, a bit will be set for each place the parameter can be set from. On a write, bits should be set to specify where the set command should be placed. If nwSetParamValue is written without nwSetParam also being set in the same PDU, the parameter will be set as if at the console; unless it is a parameter which can only be set in STARTUP.NCF in which case an error will be returned
nwSetDescrTable	1.3.6.1.4.1.23.2.28.10.3		not-accessible	A table of description string segments for each NetWare SET parameter. This table allows for long description strings to be retrieved in segments. A complete description string can be reconstituted by concatenating the ordered set of string segments. The length of the complete string is available through the nwSetParamTable.
nwSetDescrEntry	1.3.6.1.4.1.23.2.28.10.3.1		not-accessible	An entry in the SET description table contains one segment of a NetWare SET parameter description string. The complete description string can be reconstituted by concatenating the ordered set of string segments. The length of the complete string is available through the nwSetParamTable.
INT nwSetDescrCategoryIndex	1.3.6.1.4.1.23.2.28.10.3.1.1	INTEGER	read-only	A number that uniquely identifies a Set parameter category. The value of this object for a particular category has the same value as the nwSetCategoryIndex object for the same category.
INT nwSetDescrParamIndex	1.3.6.1.4.1.23.2.28.10.3.1.2	INTEGER	read-only	A number that uniquely identifies a Set parameter. The value of this object for a particular parameter has the same value as the nwSetParamIndex object for the same parameter.
INT nwSetDescrIndex	1.3.6.1.4.1.23.2.28.10.3.1.3	INTEGER	read-only	An ordinal that indicates this segment's relative position in the complete description string for this NetWare SET Parameter.
NUM nwSetDescription	1.3.6.1.4.1.23.2.28.10.3.1.4	InternationalDisplayString	read-only	A segment of the description string for this NetWare SET parameter.
nwUserAccounts	1.3.6.1.4.1.23.2.28.11
nwUserAcctTable	1.3.6.1.4.1.23.2.28.11.1		not-accessible	The User Account Table lists all user accounts in this file server. Users in the table may or may not be logged in currently. The information in this table is applicable only to NetWare 3.11 and 3.12 servers, or NetWare 4.10 servers with Bindery Services enabled. In the case of Bindery Services, data is only available for those users in the Bindery context(s) of the server. In a 4.10 server without Bindery Services enabled, this table will be empty
nwUserAcctEntry	1.3.6.1.4.1.23.2.28.11.1.1		not-accessible	An entry in the User Account table provides information on a single user account. The information in this table is applicable only to NetWare 3.11 and 3.12 servers, or NetWare 4.10 servers with Bindery Services enabled. In the case of Bindery Services, data is only available for those users in the Bindery context(s) of the server. In a 4.x server without Bindery Services enabled, this table will be empty
INT nwUserID	1.3.6.1.4.1.23.2.28.11.1.1.1	INTEGER	read-only	A unique value for each NetWare user with an account on the server. The value for each user must remain constant at least from one re-initialization of the agent to the next re-initialization.
NUM nwUserName	1.3.6.1.4.1.23.2.28.11.1.1.2	InternationalDisplayString	read-only	The user's login name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
KBY nwUserDiskUsage	1.3.6.1.4.1.23.2.28.11.1.1.3	KBytes	read-only	The amount of disk space, in KBytes, this user is occupying across all volumes on this server.
DAT nwUserLastLoginTime	1.3.6.1.4.1.23.2.28.11.1.1.4	DateAndTime	read-only	The time the user last logged in to this server.
INT nwUserAccountStatus	1.3.6.1.4.1.23.2.28.11.1.1.5	INTEGER	read-only	The status of this user's account
INT nwUserPasswordStatus	1.3.6.1.4.1.23.2.28.11.1.1.6	INTEGER	read-only	The status of this user's password.
TRA nwUserBadLoginTransport	1.3.6.1.4.1.23.2.28.11.1.1.7	TransportDomain	read-only	The transport domain (protocol) the user used to log in with bad password last time, valid only if the variable nwUserBadLoginAttempt is larger than zero.
ADR nwUserBadLoginAddress	1.3.6.1.4.1.23.2.28.11.1.1.8	TransportAddress	read-only	The address the user used to log in with bad password last time, valid only if the variable nwUserBadLoginAttempt is larger than zero.
INT nwUserBadLoginAttempts	1.3.6.1.4.1.23.2.28.11.1.1.9	INTEGER	read-only	The number of times the user attempted to log in with a bad password since the server started. The number would be 0xFFFF if the number of bad login attempts has exceeded the bad login threshold and the account has been locked.
NUM nwUserFullName	1.3.6.1.4.1.23.2.28.11.1.1.10	InternationalDisplayString	read-only	The user's full name.
nwUserVolUsageTable	1.3.6.1.4.1.23.2.28.11.2		not-accessible	The User Volume Usage Table lists the amount of volume space used by each user. It is indexed so you can easily find out how much space a particular user is using on each volume.
nwUserVolUsageEntry	1.3.6.1.4.1.23.2.28.11.2.1		not-accessible	An entry in the User Volume Usage table provides information about the amount of space a particular user is using on a particular volume.
INT nwUserVolUserID	1.3.6.1.4.1.23.2.28.11.2.1.1	INTEGER	read-only	A number that uniquely identifies a user. The value of this object for a particular user has the same value as the nwUserID object for the same user.
INT nwUserVolVolID	1.3.6.1.4.1.23.2.28.11.2.1.2	INTEGER	read-only	A number that uniquely identifies a NetWare volume. The value of this object for a particular volume has the same value as the nwVolID object for the same volume.
NUM nwUserVolUsageUser	1.3.6.1.4.1.23.2.28.11.2.1.3	InternationalDisplayString	read-only	The user's login name (Directory Services full distinguished name where appropriate). Zero-length string if not applicable.
NUM nwUserVolUsageVolume	1.3.6.1.4.1.23.2.28.11.2.1.4	InternationalDisplayString	read-only	The physical volume name.
KBY nwUserVolUsageSpaceUsed	1.3.6.1.4.1.23.2.28.11.2.1.5	KBytes	read-only	The amount of volume space, in KBytes, this user is occupying.
KBY nwUserVolUsageLimit	1.3.6.1.4.1.23.2.28.11.2.1.6	KBytes	read-only	The amount of volume space, in KBytes, to which this user is limited. 2147483647 if no limit.
nwVolUsageTable	1.3.6.1.4.1.23.2.28.11.3		not-accessible	The Volume Usage Table lists the amount of space on each volume used by each user. It is indexed so that you can easily find all the users who are occupying space on a particular volume.
nwVolUsageEntry	1.3.6.1.4.1.23.2.28.11.3.1		not-accessible	An entry in the Volume Usage Table provides information about how much space a particular user is using on a particular volume.
INT nwVolUsageVolID	1.3.6.1.4.1.23.2.28.11.3.1.1	INTEGER	read-only	A number that uniquely identifies a NetWare volume. The value of this object for a particular volume has the same value as the nwVolID object for the same volume.
INT nwVolUsageUserID	1.3.6.1.4.1.23.2.28.11.3.1.2	INTEGER	read-only	A number that uniquely identifies a user. The value of this object for a particular user has the same value as the nwUserID object for the same user.
NUM nwVolUsageVolume	1.3.6.1.4.1.23.2.28.11.3.1.3	InternationalDisplayString	read-only	The volume name.
NUM nwVolUsageUser	1.3.6.1.4.1.23.2.28.11.3.1.4	InternationalDisplayString	read-only	The user name.
KBY nwVolUsageSpaceUsed	1.3.6.1.4.1.23.2.28.11.3.1.5	KBytes	read-only	The volume space, in KBytes, in use by user.
KBY nwVolUsageLimit	1.3.6.1.4.1.23.2.28.11.3.1.6	KBytes	read-only	The amount of volume space, in KBytes, to which this user is limited. 2147483647 if no limit.

RFC description

NetWare server management covering file systems, users, queues, NCP, NLM, and network protocol information.

Start monitoring Novell NetWare file/print server with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NetWare-Server-MIB

What Is NetWare-Server-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description