All MIBs › NetWare-Server-MIB › nwSetParamMode
nwSetParamMode
Module: NetWare-Server-MIB
OID (symbolic): NetWare-Server-MIB::nwSetParamMode
OID (numeric): 1.3.6.1.4.1.23.2.28.10.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A value defining how and when the command takes effect.
The value is a sum. This value initially takes the value zero, then for each place the parameter can be set from, 2 raised to a power is added to the sum. The powers are according to the following table:
Set From Power Console 0 AUTOEXEC.NCF 1 STARTUP.NCF 2
For example, a parameter that can be set from either the console or AUTOEXEC would have a value of 3 (2**0 + 2**1).
On a read, a bit will be set for each place the parameter can be set from. On a write, bits should be set to specify where the set command should be placed. If nwSetParamValue is written without nwSetParam also being set in the same PDU, the parameter will be set as if at the console; unless it is a parameter which can only be set in STARTUP.NCF in which case an error will be returned
What is nwSetParamMode?
This is a bit-mask value indicating where this SET parameter can be applied from: the console, AUTOEXEC.NCF, or STARTUP.NCF, with each location contributing a power of two to the sum. On a write, admins set the corresponding bits to control where the change is recorded, and if none are set alongside the value write, the parameter is applied as if set at the console, unless it's a startup-only parameter, which instead returns an error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23.2.28.10.2.1.10 snmpwalk -v2c -c public <target> NetWare-Server-MIB::nwSetParamMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.23.2.28.10.2.1.10.1 snmpget -v2c -c public <target> NetWare-Server-MIB::nwSetParamMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.23.2.28.10.2.1.10.1 i <value>
Start monitoring Novell NetWare file/print server with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NetWare-Server-MIB::nwSetParamMode OID value, configure state conditions and alerts, and monitor any Novell NetWare file/print server from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.23 | excelan | CMU-MIB |
| 1.3.6.1.4.1.23.2 | genericGroup | FASTPATH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.23.2.28 | nwServer | NetWare-Server-MIB |
| 1.3.6.1.4.1.23.2.28.10 | nwSetParams | NetWare-Server-MIB |
| 1.3.6.1.4.1.23.2.28.10.2 | nwSetParamTable | NetWare-Server-MIB |
| 1.3.6.1.4.1.23.2.28.10.2.1 | nwSetParamEntry | NetWare-Server-MIB |
| 1.3.6.1.4.1.23.2.28.10.2.1.10 | nwSetParamMode | NetWare-Server-MIB |