NNCGNI00X5-MIB

All MIBs › NNCGNI00X5-MIB

Category: Network Management

Description: Provides Newbridge Networks GNI module management objects for switching fabric and connection status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NNCGNI00X5-MIB?

NNCGNI00X5-MIB is a legacy proprietary MIB (built on NNCGNI00X1-SMI) configuring DS1/E1 line conditioning and loopback settings on a WAN access device. Its DS1-configuration table, keyed by index, records line length/status, trunk-conditioning enable, loss-of-frame/distant-loss-of-frame/failed-state/error-rate/CSU-loopback conditioning, alarm declare/clear time, CRC-on-reframe flag, worst-interval, error-event count, 81XX compatibility, and loopback config, while a parallel E1-configuration table adds transmit/received shield status and statistics type. As a configuration/status MIB it lets an administrator confirm DS1/E1 line-conditioning and loopback settings on this legacy WAN access device. It is deployed on legacy WAN access equipment (NNCGNI00X1-SMI vendor line). Engineers can download the NNCGNI00X5-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NNCGNI00X5-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy WAN access equipment (NNCGNI00X1-SMI vendor line)

Monitoring Examples

An administrator checks nncExtDs1LossOfFrameConditioning and nncExtDs1CSULoopbackConditioning to confirm DS1 line-conditioning settings on this legacy WAN access device.

What Can Be Monitored

DS1/E1 line-conditioning and loopback configuration

Imported Objects

From NNCGNI00X1-SMI

nncExtDs1

OBJECT-IDENTITY

From NNCGNI00X7-MIB

CircuitIndex
PortIndex

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge

OIDs

OID symbolic	OID numeric	Type	Access
INT nncExtDs181XXCompatibility	1.3.6.1.4.1.123.3.10.1.1.15	INTEGER	read-write
NUM nncExtDs1AlarmClearTime	1.3.6.1.4.1.123.3.10.1.1.11	DebounceInterval	read-write
NUM nncExtDs1AlarmDeclareTime	1.3.6.1.4.1.123.3.10.1.1.10	DebounceInterval	read-write
INT nncExtDs1CctBitsToUse	1.3.6.1.4.1.123.3.10.7.1.9	INTEGER	read-write
INT nncExtDs1CctDataInversion	1.3.6.1.4.1.123.3.10.7.1.5	INTEGER	read-write
INT nncExtDs1CctDefaultData	1.3.6.1.4.1.123.3.10.7.1.6	INTEGER	read-write
INT nncExtDs1CctFaultSignalling	1.3.6.1.4.1.123.3.10.7.1.11	INTEGER	read-write
INT nncExtDs1CctFirstCode	1.3.6.1.4.1.123.3.10.7.1.7	INTEGER	read-write
DS1 nncExtDs1CctIndex	1.3.6.1.4.1.123.3.10.7.1.1	Ds1LineIndex	read-only
INT nncExtDs1CctNumber	1.3.6.1.4.1.123.3.10.7.1.3	INTEGER	read-only
INT nncExtDs1CctPortNumber	1.3.6.1.4.1.123.3.10.7.1.2	INTEGER	read-only
INT nncExtDs1CctSecondCode	1.3.6.1.4.1.123.3.10.7.1.8	INTEGER	read-write
INT nncExtDs1CctSuperRateMap	1.3.6.1.4.1.123.3.10.7.1.10	INTEGER	read-write
INT nncExtDs1CctUseRBS	1.3.6.1.4.1.123.3.10.7.1.4	INTEGER	read-write
nncExtDs1CircuitEntry	1.3.6.1.4.1.123.3.10.7.1		not-accessible
nncExtDs1CircuitTable	1.3.6.1.4.1.123.3.10.7		not-accessible
nncExtDs1ConfigEntry	1.3.6.1.4.1.123.3.10.1.1		not-accessible
DS1 nncExtDs1ConfigIndex	1.3.6.1.4.1.123.3.10.1.1.1	Ds1LineIndex	read-only
nncExtDs1ConfigTable	1.3.6.1.4.1.123.3.10.1		not-accessible
INT nncExtDs1CSULoopbackConditioning	1.3.6.1.4.1.123.3.10.1.1.9	INTEGER	read-write
nncExtDs1CurrentEntry	1.3.6.1.4.1.123.3.10.8.1		not-accessible
DS1 nncExtDs1CurrentIndex	1.3.6.1.4.1.123.3.10.8.1.1	Ds1LineIndex	read-only
GAU nncExtDs1CurrentLOFC	1.3.6.1.4.1.123.3.10.8.1.2	Gauge	read-only
nncExtDs1CurrentTable	1.3.6.1.4.1.123.3.10.8		not-accessible
INT nncExtDs1DistantLossOfFrameConditioning	1.3.6.1.4.1.123.3.10.1.1.6	INTEGER	read-write
nncExtDs1E1ConfigEntry	1.3.6.1.4.1.123.3.10.2.1		not-accessible
nncExtDs1E1ConfigTable	1.3.6.1.4.1.123.3.10.2		not-accessible
DS1 nncExtDs1E1Index	1.3.6.1.4.1.123.3.10.2.1.1	Ds1LineIndex	read-only
INT nncExtDs1E1ReceivedShieldStatus	1.3.6.1.4.1.123.3.10.2.1.3	INTEGER	read-write
INT nncExtDs1E1StatisticsType	1.3.6.1.4.1.123.3.10.2.1.4	INTEGER	read-write
INT nncExtDs1E1TransmitShieldStatus	1.3.6.1.4.1.123.3.10.2.1.2	INTEGER	read-write
INT nncExtDs1E1TrunkCondEnable	1.3.6.1.4.1.123.3.10.1.1.17	INTEGER	read-only
INT nncExtDs1ErrorEvents	1.3.6.1.4.1.123.3.10.1.1.14	INTEGER	read-only
INT nncExtDs1ErrorRateConditioning	1.3.6.1.4.1.123.3.10.1.1.8	INTEGER	read-write
INT nncExtDs1FailedStateConditioning	1.3.6.1.4.1.123.3.10.1.1.7	INTEGER	read-write
nncExtDs1G821StatisticsEntry	1.3.6.1.4.1.123.3.10.3.1		not-accessible
nncExtDs1G821StatisticsTable	1.3.6.1.4.1.123.3.10.3		not-accessible
nncExtDs1IntervalEntry	1.3.6.1.4.1.123.3.10.4.1		not-accessible
DS1 nncExtDs1IntervalIndex	1.3.6.1.4.1.123.3.10.4.1.1	Ds1LineIndex	read-only
GAU nncExtDs1IntervalLOFC	1.3.6.1.4.1.123.3.10.4.1.3	Gauge	read-only
INT nncExtDs1IntervalNumber	1.3.6.1.4.1.123.3.10.4.1.2	INTEGER	read-only
nncExtDs1IntervalTable	1.3.6.1.4.1.123.3.10.4		not-accessible
INT nncExtDs1LineLength	1.3.6.1.4.1.123.3.10.1.1.2	INTEGER	read-write
INT nncExtDs1LineStatus	1.3.6.1.4.1.123.3.10.1.1.3	INTEGER	read-only
INT nncExtDs1LoopbackConfig	1.3.6.1.4.1.123.3.10.1.1.16	INTEGER	read-write
INT nncExtDs1LossOfFrameConditioning	1.3.6.1.4.1.123.3.10.1.1.5	INTEGER	read-write
nncExtDs1TotalEntry	1.3.6.1.4.1.123.3.10.5.1		not-accessible
DS1 nncExtDs1TotalIndex	1.3.6.1.4.1.123.3.10.5.1.1	Ds1LineIndex	read-only
GAU nncExtDs1TotalLOFC	1.3.6.1.4.1.123.3.10.5.1.2	Gauge	read-only
nncExtDs1TotalTable	1.3.6.1.4.1.123.3.10.5		not-accessible
INT nncExtDs1TrunkCondEnable	1.3.6.1.4.1.123.3.10.1.1.4	INTEGER	read-only
INT nncExtDs1UseCRCOnReframe	1.3.6.1.4.1.123.3.10.1.1.12	INTEGER	read-write
INT nncExtDs1WorstInterval	1.3.6.1.4.1.123.3.10.1.1.13	INTEGER	read-only
GAU nncExtDs1WorstIntervalBESs	1.3.6.1.4.1.123.3.10.6.1.2	Gauge	read-only
GAU nncExtDs1WorstIntervalBPVs	1.3.6.1.4.1.123.3.10.6.1.9	Gauge	read-only
GAU nncExtDs1WorstIntervalCSSs	1.3.6.1.4.1.123.3.10.6.1.8	Gauge	read-only
GAU nncExtDs1WorstIntervalCVs	1.3.6.1.4.1.123.3.10.6.1.10	Gauge	read-only
nncExtDs1WorstIntervalEntry	1.3.6.1.4.1.123.3.10.6.1		not-accessible
GAU nncExtDs1WorstIntervalESs	1.3.6.1.4.1.123.3.10.6.1.4	Gauge	read-only
DS1 nncExtDs1WorstIntervalIndex	1.3.6.1.4.1.123.3.10.6.1.1	Ds1LineIndex	read-only
GAU nncExtDs1WorstIntervalLESs	1.3.6.1.4.1.123.3.10.6.1.11	Gauge	read-only
GAU nncExtDs1WorstIntervalLOFC	1.3.6.1.4.1.123.3.10.6.1.3	Gauge	read-only
GAU nncExtDs1WorstIntervalSEFSs	1.3.6.1.4.1.123.3.10.6.1.6	Gauge	read-only
GAU nncExtDs1WorstIntervalSESs	1.3.6.1.4.1.123.3.10.6.1.5	Gauge	read-only
nncExtDs1WorstIntervalTable	1.3.6.1.4.1.123.3.10.6		not-accessible
GAU nncExtDs1WorstIntervalUASs	1.3.6.1.4.1.123.3.10.6.1.7	Gauge	read-only
CTR nncG821DegradedMinutes	1.3.6.1.4.1.123.3.10.3.1.2	Counter	read-only
CTR nncG821ErroredSeconds	1.3.6.1.4.1.123.3.10.3.1.3	Counter	read-only
DS1 nncG821Index	1.3.6.1.4.1.123.3.10.3.1.1	Ds1LineIndex	read-only
CTR nncG821SeverelyErroredSeconds	1.3.6.1.4.1.123.3.10.3.1.4	Counter	read-only
CTR nncG821TotalSeconds	1.3.6.1.4.1.123.3.10.3.1.6	Counter	read-only
CTR nncG821UnavailableSeconds	1.3.6.1.4.1.123.3.10.3.1.5	Counter	read-only

RFC description

Proprietary vendor-specific MIB for network device management. This appears to be a legacy or vendor-proprietary identifier not widely documented in standard SNMP RFC repositories or public MIB databases.

Start monitoring Legacy WAN access equipment (NNCGNI00X1-SMI vendor line, DS1/E1 conditioning) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NNCGNI00X5-MIB

What Is NNCGNI00X5-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description