All MIBs › NNCGNI00X7-MIB
Category: Network Management
Description:
Provides Newbridge Networks GNI module management objects for alarm reporting and fault handling.
Imported Objects
From NNCGNI00X1-SMI
| nncExtDevice | OBJECT-IDENTITY |
From NNCGNI00X4-MIB
| PositionIndex |
From RFC-1212
| OBJECT-TYPE |
From RFC1213-MIB
| DisplayString |
What Is NNCGNI00X7-MIB?
NNCGNI00X7-MIB is a Newbridge Networks proprietary MIB covering the GNI (generic network interface) module used in Newbridge's ATM/multiservice switching chassis. It defines management objects for reporting hardware alarms and fault conditions detected on GNI line/interface cards rather than traffic-performance counters. Its primary monitoring role is hardware status: it surfaces card-level fault and alarm states so operators can detect a failed or degraded GNI module, complementing the vendor's separate ATM traffic-statistics MIBs. Operators typically consult the NNCGNI00X7-MIB MIB definitions only when troubleshooting an active alarm on a specific chassis slot, since the module exists mainly to name GNI fault conditions rather than to expose traffic counters. As a chassis submodule MIB it typically depends on a broader Newbridge chassis/equipment MIB for slot and card-identification context. It was deployed on legacy Newbridge (later Alcatel) multiservice switching platforms where GNI cards provide network interface connectivity.
IPNetwork Monitor allows you to monitor SNMP objects defined in NNCGNI00X7-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- GNI card alarm status
- hardware fault conditions
- interface module operational state
Supported Devices
- Newbridge Networks multiservice switch chassis
- GNI interface module/card
Monitoring Examples
An operator polls the GNI module's alarm-status objects for a given chassis slot/card to detect whether a fault condition such as loss of signal or card failure has been raised; a transition from normal to alarmed state on a GNI card indicates a hardware fault requiring card replacement or reseating.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nncExtDeviceTable | 1.3.6.1.4.1.123.3.9.1 | not-accessible | Configuration information for the Rptr modules in the system | |
| nncExtDeviceEntry | 1.3.6.1.4.1.123.3.9.1.1 | not-accessible | Configuration and status module for a device | |
| POS nncExtDevPosnIdx | 1.3.6.1.4.1.123.3.9.1.1.1 | PositionIndex | read-only | |
| POR nncExtDevPortIdx | 1.3.6.1.4.1.123.3.9.1.1.2 | PortIndex | read-only | |
| CIR nncExtDevCctIdx | 1.3.6.1.4.1.123.3.9.1.1.3 | CircuitIndex | read-only | |
| STR nncExtDevName | 1.3.6.1.4.1.123.3.9.1.1.4 | DisplayString | read-write | |
| INT nncExtDevLoopback | 1.3.6.1.4.1.123.3.9.1.1.5 | INTEGER | read-write | |
| INT nncExtDevCallStatus | 1.3.6.1.4.1.123.3.9.1.1.6 | INTEGER | read-only | |
| INT nncExtDevBusyOut | 1.3.6.1.4.1.123.3.9.1.1.7 | INTEGER | read-write | |
| SIG nncExtDevOutputSignalling | 1.3.6.1.4.1.123.3.9.1.1.8 | SignallingBits | read-write | |
| SIG nncExtDevInputSignalling | 1.3.6.1.4.1.123.3.9.1.1.9 | SignallingBits | read-only | |
| OCT nncExtDevConnectedTo | 1.3.6.1.4.1.123.3.9.1.1.10 | OCTET STRING | read-write | |
| STR nncExtDevUIName | 1.3.6.1.4.1.123.3.9.1.1.11 | DisplayString | read-only | |
| STR nncExtDevUIType | 1.3.6.1.4.1.123.3.9.1.1.12 | DisplayString | read-only | |
| STR nncExtDevConnectedToUIName | 1.3.6.1.4.1.123.3.9.1.1.13 | DisplayString | read-only |
FAQ
What does NNCGNI00X7-MIB monitor on a Newbridge GNI card?
It defines management objects for reporting hardware alarms and fault conditions detected on the GNI line/interface card, rather than traffic-performance counters, so operators can see card-level fault and alarm states.
How would this MIB help detect a failed GNI module in a multiservice switch chassis?
By polling its alarm and fault objects you can identify a failed or degraded GNI module, complementing the vendor's separate ATM traffic-statistics MIBs that track throughput rather than hardware faults.
RFC description
Northern Telecom/Nortel vendor-specific MIB for managing network equipment and system resources.
Start monitoring Newbridge Networks multiservice switch chassis (GNI interface module fault/alarm) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.