NCRBSC-OPT-MIB

All MIBs › NCRBSC-OPT-MIB

Category: Network Management

Description: Defines optional management extensions for NCR BSC (Base Station Controller) network elements.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NCRBSC-OPT-MIB?

NCRBSC-OPT-MIB defines optional management extensions for NCR/AT&T CDX 6500-series Base Station Controller (BSC) data communications equipment, a legacy terminal/protocol-conversion platform. It groups optional, protocol-specific configuration objects for the controller's PCT and PST port types rather than exposing broad runtime telemetry. Its use for hardware/software status monitoring is narrow: the device group objects would be used to confirm which link-layer protocol and device-level BSC parameters are configured on a given port, functioning more as configuration-group markers than active counters. It presumably depends on a base CDX6500 MIB defining the parent object tree and possibly RFC1213-MIB-style interface conventions. It would be deployed in legacy NCR/AT&T GIS data communications networks using BSC-based terminal connectivity, now of largely historical interest. Engineers can download the NCRBSC-OPT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NCRBSC-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NCR/AT&T CDX 6500 Base Station Controller
legacy BSC/terminal networking equipment

Monitoring Examples

An operator would reference cdx6500PCTPortProtocolGroup and cdx6500PSTPortProtocolGroup to confirm which protocol is configured on each PCT or PST port of the controller, and cdx6500PCTNCRBSCDeviceGroup for device-level BSC parameters. These are grouping/conformance-style objects rather than rich counters, so this MIB is better understood as defining optional manageable feature groups than as a detailed runtime monitoring source; there isn't enough object detail here to honestly describe a specific fault-detection scenario beyond confirming protocol group configuration.

What Can Be Monitored

PCT port protocol configuration
PST port protocol configuration
BSC device group parameters

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
codex	1.3.6.1.4.1.449
cdxProductSpecific	1.3.6.1.4.1.449.2
cdx6500	1.3.6.1.4.1.449.2.1
cdx6500Configuration	1.3.6.1.4.1.449.2.1.2
cdx6500CfgProtocolGroup	1.3.6.1.4.1.449.2.1.2.1
cdx6500PCTPortProtocolGroup	1.3.6.1.4.1.449.2.1.2.1.1
cdx6500PPCTNCRBisyncTable	1.3.6.1.4.1.449.2.1.2.1.1.17		not-accessible	A table of NCRBSC Port configuration entries.
cdx6500PPCTNCRBisyncEntry	1.3.6.1.4.1.449.2.1.2.1.1.17.1		not-accessible	A NCRBSC Configuration Table entry. Each entry contains the configuration parameters for a single NCRBSC port.
INT cdx6500NCRBSCCfgPortNumber	1.3.6.1.4.1.449.2.1.2.1.1.17.1.1	INTEGER	read-only	The NCRBSC port number described by this entry.
INT cdx6500NCRBSCCfgPADType	1.3.6.1.4.1.449.2.1.2.1.1.17.1.2	INTEGER	read-only	Indicates whether the port is functioning as a Terminal PAD (TPAD) or a Host PAD (HPAD). newvalTpad : same functionality as 'tpad', new enumeration added for RFC1155 compatibility.
INT cdx6500NCRBSCCfgClockSource	1.3.6.1.4.1.449.2.1.2.1.1.17.1.3	INTEGER	read-only	int - internal clock source. ext - external clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility.
INT cdx6500NCRBSCCfgClockSpeed	1.3.6.1.4.1.449.2.1.2.1.1.17.1.4	INTEGER	read-only	This is the speed of the port in bits per second, when using internal clocking.
INT cdx6500NCRBSCCfgContention	1.3.6.1.4.1.449.2.1.2.1.1.17.1.5	INTEGER	read-only	Indicates whether Half Duplex (hdx) or Full Duplex (fdx) modem signals are being generated. Full Duplex indicates communication is occuring in both directions simultaneously between devices. Half Duplex indicates transmission is occuring in both directions, but only in one direction at a time. newvalHdx - same functionality as 'hdx', new enumeration added for RFC1155 compatibility.
INT cdx6500NCRBSCCfgNumDevices	1.3.6.1.4.1.449.2.1.2.1.1.17.1.6	INTEGER	read-only	Specifies the number of physical devices on this line.
INT cdx6500NCRBSCCfgServTimer	1.3.6.1.4.1.449.2.1.2.1.1.17.1.7	INTEGER	read-only	The Service Timer specifies the interval of time in seconds between periodic servicing. Such servicing includes intervals between the time the PAD will attempt to poll devices that previously failed to respond and intervals between failures in attempts to establish a connection from a device configured for Autocall.
INT cdx6500NCRBSCCfgErrThreshCount	1.3.6.1.4.1.449.2.1.2.1.1.17.1.8	INTEGER	read-only	Indicates number of consecutive errors that can occur before a device is considered down.
INT cdx6500NCRBSCCfgRetranTimeout	1.3.6.1.4.1.449.2.1.2.1.1.17.1.10	INTEGER	read-only	Specifies the amount of time in TENTHS OF A SECOND before a retransmission of the previously sent protocol sequence is attempted. The effective range is 0.1 - 25.5 seconds. The MINIMUM acceptable values are dependent on the speed configured as follows (speed - responsetimeout): 1200 - 12, 2400 - 6, 4800 - 3,9600 - 2, 19200 - 2
INT cdx6500NCRBSCCfgInterBuffTimeout	1.3.6.1.4.1.449.2.1.2.1.1.17.1.11	INTEGER	read-only	Specifies the maximum amount of time in seconds the PAD will wait for the end of a multi-packet message from the network. If this time limit is exceeded, the PAD will abort the entire message and request retransmission.
STR cdx6500NCRBSCCfgPortSubAddr	1.3.6.1.4.1.449.2.1.2.1.1.17.1.12	DisplayString	read-only	0 - 3 Decimal digits Calls addressed to this node and with this subaddress will be routed to this port.
STR cdx6500NCRBSCCfgPortOptions	1.3.6.1.4.1.449.2.1.2.1.1.17.1.13	DisplayString	read-only	Select options on this NCRBSC port as follows: NONE - no option specified ORG - Controllers on this port will originate the calls ACK - DSP End-to-End Acknowledgements are to be used Any combination of above specified by summing (e.g. ORG+ACK).
STR cdx6500NCRBSCCfgRestrictConnDest	1.3.6.1.4.1.449.2.1.2.1.1.17.1.14	DisplayString	read-only	1 - 32 Decimal digits or a single blank All calls originating from this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function.
INT cdx6500NCRBSCCfgBillRec	1.3.6.1.4.1.449.2.1.2.1.1.17.1.15	INTEGER	read-only	This controls whether billing (accounting) records will be created for calls on this Device. newvalOff : same functionality as 'off', new enumeration added for RFC1155 compatibility.
INT cdx6500NCRBSCCfgElectricalInterfaceType	1.3.6.1.4.1.449.2.1.2.1.1.17.1.16	INTEGER	read-only	Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
INT cdx6500NCRBSCCfgV24ElectricalInterfaceOption	1.3.6.1.4.1.449.2.1.2.1.1.17.1.17	INTEGER	read-only	Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
INT cdx6500NCRBSCCfgHighSpeedElectricalInterfaceOption	1.3.6.1.4.1.449.2.1.2.1.1.17.1.18	INTEGER	read-only	Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
cdx6500PCTNCRBSCDeviceGroup	1.3.6.1.4.1.449.2.1.2.1.7
cdx6500PBCTNCRBSCDeviceTable	1.3.6.1.4.1.449.2.1.2.1.7.1		not-accessible	A table of NCRBSC device configuration entries.
cdx6500PBCTNCRBSCDeviceEntry	1.3.6.1.4.1.449.2.1.2.1.7.1.1		not-accessible	A NCRBSC Configuration Table entry. Each entry contains the configuration parameters for a single NCRBSC device.
INT cdx6500ncrbscDevPortNumber	1.3.6.1.4.1.449.2.1.2.1.7.1.1.1	INTEGER	read-only	The NCRBSC port accessing this device
INT cdx6500ncrbscDevEntry	1.3.6.1.4.1.449.2.1.2.1.7.1.1.2	INTEGER	read-only	The unique number for this specific port.
STR cdx6500ncrbscBSCControlUnitAddr	1.3.6.1.4.1.449.2.1.2.1.7.1.1.3	DisplayString	read-only	0-2 Hex digits, This is the Poll address of the Control Unit that supports this device. It consists of two hexadecimal digits. Valid ranges depend on device Character Set as follows: EBCDIC: 40,C1,C2,C3,C4,C5,C6,C7,C8,C9,4A,4B,4C,4D,4E,4F, 50,D1,D2,D3,D4,D5,D6,D7,D8,D9,5A,5B,5C,5D,5E,5F ASCII : 20,41,42,43,44,45,46,47,48,49,5B,2E,3C,28,2B,21, 26,4A,4B,4C,4D,4E,4F,50,51,52,5D,24,2A,29,3B,5E
STR cdx6500ncrbscDestControlUnitAddr	1.3.6.1.4.1.449.2.1.2.1.7.1.1.4	DisplayString	read-only	0-3 Hex digits, Specifies control unit address on remote PAD. Used with Connection Request Mode = 2 or 3
STR cdx6500ncrbscAutocallMnemonic	1.3.6.1.4.1.449.2.1.2.1.7.1.1.5	DisplayString	read-only	0-2 Hex digits, This mnemonic name is used if this device is configured for AUTO or FAST calling.
INT cdx6500ncrbscDeviceEnabled	1.3.6.1.4.1.449.2.1.2.1.7.1.1.6	INTEGER	read-only	This parameter is used to enable or disable the operation of this controller device. yes - Enable device. no - Disable device. newvalNo - same functionality as 'no', new enumeration added for RFC1155 compatibility.
cdx6500Statistics	1.3.6.1.4.1.449.2.1.3
cdx6500StatProtocolGroup	1.3.6.1.4.1.449.2.1.3.1
cdx6500PSTPortProtocolGroup	1.3.6.1.4.1.449.2.1.3.1.1
cdx6500PPSTNCRBisyncTable	1.3.6.1.4.1.449.2.1.3.1.1.17		not-accessible	A table of NCRBSC port statistics entries.
cdx6500ncrbscPortStatEntry	1.3.6.1.4.1.449.2.1.3.1.1.17.1		not-accessible	A NCRBSC Port Statistic Table entry. Each entry contains the statistics for a single NCRBSC port.
INT cdx6500ncrbscStatPortNumber	1.3.6.1.4.1.449.2.1.3.1.1.17.1.1	INTEGER	read-only	The NCRBSC port number described by this entry.
INT cdx6500ncrbscPortStatus	1.3.6.1.4.1.449.2.1.3.1.1.17.1.2	INTEGER	read-only	Port Status indicates whether or not the port is switched on and is ready for operation. This value may be one of : up - Port is up and running. down - port is down. disabled - port has been disabled. enabled - port has been enabled, but is not yet Up busyOut - port has been set to be disabled as soon as last active session is disestablished. No new sessions will be established. newvalDisabled - same functionality as 'disabled', new enumeration added for RFC1155 compatibility.
STR cdx6500ncrbscPortState	1.3.6.1.4.1.449.2.1.3.1.1.17.1.3	DisplayString	read-only	Port State indicates what the port is actually in the process of doing. This value may be one of : INACTIVE - H/TPAD port inactive entered during boot. WTPOLSERVE - TPAD is waiting for response to a poll. WTSELRESP - TPAD is waiting for the response to a select. WTDATARESP - H/TPAD is waiting for data to be acknowledged. DATA - H/TPAD is in the process of sending/receiving data. SEL/POL - TPAD is about to select or poll a controller. This is the most common state for a TPAD. SELECT - TPAD is about to select a device. POLL - TPAD is about to poll a device. WTENQRESP - H/TPAD is waiting for a NAK response to an ENQ sent. IDLE - HPAD is waiting for the host to send commands. This is the most common state of the HPAD. WTEOT - HPAD is waiting for an expected EOT from the host. FLUSHINGDATA - HPAD encountered an error in the message received from the host. As a result, the data is being flushed. WTLCM - HPAD received a read/modify and is waiting for the response from the TPAD.
INT cdx6500ncrbscPortSpeed	1.3.6.1.4.1.449.2.1.3.1.1.17.1.4	INTEGER	read-only	This is the speed of the port if clock is internal. If clock is external, this is the detected clock speed. If Port Speed is 0, clock is external, but clocking is not being received from attatched device.
INT cdx6500ncrbscPortUtilIn	1.3.6.1.4.1.449.2.1.3.1.1.17.1.5	INTEGER	read-only	Percentage of port input bandwidth in use.
INT cdx6500ncrbscPortUtilOut	1.3.6.1.4.1.449.2.1.3.1.1.17.1.6	INTEGER	read-only	Percentage of Port output bandwidth in use.
CTR cdx6500ncrbscInMsgs	1.3.6.1.4.1.449.2.1.3.1.1.17.1.7	Counter	read-only	Number of message received since last node, port, or statistics reset.
CTR cdx6500ncrbscOutMsgs	1.3.6.1.4.1.449.2.1.3.1.1.17.1.8	Counter	read-only	Number of message sent since last node, port, or statistics reset.
CTR cdx6500ncrbscInChars	1.3.6.1.4.1.449.2.1.3.1.1.17.1.9	Counter	read-only	Number of characters received since last node, port, or statistics reset.
CTR cdx6500ncrbscOutChars	1.3.6.1.4.1.449.2.1.3.1.1.17.1.10	Counter	read-only	Number of characters sent since last node, port, or statistics reset.
INT cdx6500ncrbscCharRateIn	1.3.6.1.4.1.449.2.1.3.1.1.17.1.11	INTEGER	read-only	Number of characters received per second.
INT cdx6500ncrbscCharRateOut	1.3.6.1.4.1.449.2.1.3.1.1.17.1.12	INTEGER	read-only	Number of characters sent per second.
CTR cdx6500ncrbscCrcBccErrs	1.3.6.1.4.1.449.2.1.3.1.1.17.1.13	Counter	read-only	Number of CRC errors since last node, port, or statistics reset.
INT cdx6500ncrbscRviRx	1.3.6.1.4.1.449.2.1.3.1.1.17.1.14	INTEGER	read-only	Accumulator, received RVI.
INT cdx6500ncrbscRviTx	1.3.6.1.4.1.449.2.1.3.1.1.17.1.15	INTEGER	read-only	Accumulator, transmitted RVI.
INT cdx6500ncrbscWackRx	1.3.6.1.4.1.449.2.1.3.1.1.17.1.16	INTEGER	read-only	Accumulator, recevied WACK.
INT cdx6500ncrbscNconvRxMax	1.3.6.1.4.1.449.2.1.3.1.1.17.1.17	INTEGER	read-only	Maximum number of conversation messages received from device within a poll or select.
INT cdx6500ncrbscNconvTxMax	1.3.6.1.4.1.449.2.1.3.1.1.17.1.18	INTEGER	read-only	Maximum number of conversation messages sent to device within a poll or select.
INT cdx6500ncrbscNgroupRxMax	1.3.6.1.4.1.449.2.1.3.1.1.17.1.19	INTEGER	read-only	Maximum number of grouping messages received from device within a poll or select.
INT cdx6500ncrbscNgroupTxMax	1.3.6.1.4.1.449.2.1.3.1.1.17.1.20	INTEGER	read-only	Maximum number of grouping messages sent to device within a poll or select.
INT cdx6500ncrbscLongRespTime	1.3.6.1.4.1.449.2.1.3.1.1.17.1.21	INTEGER	read-only	Longest response time
INT cdx6500ncrbscAverageRespTime	1.3.6.1.4.1.449.2.1.3.1.1.17.1.22	INTEGER	read-only	Average response time
INT cdx6500ncrbscRviForce	1.3.6.1.4.1.449.2.1.3.1.1.17.1.23	INTEGER	read-only	Number of RVI's sent to device from the polling algorithm.

RFC description

NCR BSC vendor MIB for optical networking equipment management and transponder configuration.

Start monitoring NCR/AT&T CDX 6500 Base Station Controller (legacy BSC terminal equipment) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NCRBSC-OPT-MIB

What Is NCRBSC-OPT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description