All MIBs › NIS-3500-2208PCE
Last Updated: 2006-04-20
Category: Hardware Inventory
Description: Defines management objects for the NIS 3500-2208PCE chassis hardware and module inventory.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NIS-3500-2208PCE?
NIS-3500-2208PCE is a vendor MIB for the NIS 3500-2208PCE Industrial Ethernet Switch, covering system identification, firmware version, and basic device administration settings. It exposes standard system identity objects (name, location, contact, description), firmware version and MAC address, switch-level settings mirrored under a 'switchSetting' group, a location-based alert flag, and administrative password/user configuration. Its relevance to hardware/software status monitoring centers on firmware version tracking (systemFwVer) to confirm the switch is running the required kernel/firmware build, systemMacAddress/system identity fields for asset inventory, and the location alert flag for facility-level fault indication. It builds on standard SNMPv1/v2 system-group conventions (mirroring sysName/sysLocation/sysContact/sysDescr from MIB-II) under the vendor's private enterprise branch. It is deployed on industrial Ethernet switches used in factory automation or process control environments requiring firmware kernel version 2.46 or higher. Engineers can download the NIS-3500-2208PCE file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in NIS-3500-2208PCE. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- NIS 3500-2208PCE Industrial Ethernet Switch
Monitoring Examples
An administrator would poll systemFwVer to confirm the switch is running firmware kernel 2.46 or higher as required, and systemMacAddress/systemDescr for asset inventory. switchSettingLocationAlert could be checked to see whether a location-based alert condition (e.g., an environmental or physical alarm at that switch's site) has been flagged. adminPasswordUserName and adminPassword-Password represent administrative credential configuration rather than runtime telemetry, and would typically be write-only in practice for security reasons.
What Can Be Monitored
- system firmware version
- system MAC address
- system name/location/contact identification
- location-based alert flag
- administrative user/password configuration state
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| internet |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| private | 1.3.6.1.4 | |||
| enterprises | 1.3.6.1.4.1 | |||
| company | 1.3.6.1.4.1.25972 | |||
| switches | 1.3.6.1.4.1.25972.0 | |||
| managedPoeSwitch | 1.3.6.1.4.1.25972.0.5 | |||
| nis_3500_2208pce | 1.3.6.1.4.1.25972.0.5.20 | |||
| contact | 1.3.6.1.4.1.25972.0.5.20.0 | The MIB module is for Industrial Ethernet Switch and compatible to firmware kernel version 2.46 or higher. | ||
| systemInfo | 1.3.6.1.4.1.25972.0.5.20.1 | |||
| STR systemName | 1.3.6.1.4.1.25972.0.5.20.1.1 | DisplayString | read-only | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| STR systemLocation | 1.3.6.1.4.1.25972.0.5.20.1.2 | DisplayString | read-only | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| STR systemContact | 1.3.6.1.4.1.25972.0.5.20.1.3 | DisplayString | read-only | The contact information of system. |
| STR systemDescr | 1.3.6.1.4.1.25972.0.5.20.1.4 | DisplayString | read-only | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters. |
| STR systemFwVer | 1.3.6.1.4.1.25972.0.5.20.1.5 | DisplayString | read-only | Firmware version of the device. |
| MAC systemMacAddress | 1.3.6.1.4.1.25972.0.5.20.1.6 | MacAddress | read-only | The MAC address of switch. |
| basicSetting | 1.3.6.1.4.1.25972.0.5.20.2 | |||
| switchSetting | 1.3.6.1.4.1.25972.0.5.20.2.1 | |||
| STR switchSettingSystemName | 1.3.6.1.4.1.25972.0.5.20.2.1.1 | DisplayString | read-write | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| STR switchSettingSystemLocation | 1.3.6.1.4.1.25972.0.5.20.2.1.2 | DisplayString | read-write | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| STR switchSettingSystemContact | 1.3.6.1.4.1.25972.0.5.20.2.1.3 | DisplayString | read-write | The contact information of system. |
| INT switchSettingLocationAlert | 1.3.6.1.4.1.25972.0.5.20.2.1.4 | INTEGER | read-write | The location alert function. |
| adminPassword | 1.3.6.1.4.1.25972.0.5.20.2.2 | |||
| STR adminPasswordUserName | 1.3.6.1.4.1.25972.0.5.20.2.2.1 | DisplayString | read-write | The name(ID) of security manager. |
| STR adminPassword_Password | 1.3.6.1.4.1.25972.0.5.20.2.2.2 | DisplayString | write-only | The password of security manager. This object can't be read. it's write-only. |
| ipConfiguration | 1.3.6.1.4.1.25972.0.5.20.2.3 | |||
| ipConfigurationTable | 1.3.6.1.4.1.25972.0.5.20.2.3.1 | not-accessible | Table of descriptive information and configuration about IP of switche. | |
| ipConfigurationEntry | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1 | not-accessible | An entry in the table, containing IP/DHCP-client information of the switch. | |
| I32 ipConfigurationIndex | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.1 | Integer32 | not-accessible | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| INT ipConfigurationDHCPStatus | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.2 | INTEGER | read-write | Parameter to enable or disable DHCP client function of the switch. When enabled, device will be a DHCP client and request the IP configuration from DHCP server. Note: Other items in this table couldn't be modified, when ipConfigurationDHCPStatus is enabled. |
| IP ipConfigurationAddress | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.3 | IpAddress | read-write | The IP address of switch. |
| IP ipConfigurationSubMask | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.4 | IpAddress | read-write | The subnet mask of switch. |
| IP ipConfigurationGateway | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.5 | IpAddress | read-write | The gateway address of switch. |
| IP ipConfigurationDNS1 | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.6 | IpAddress | read-write | The DNS1 address of switch. |
| IP ipConfigurationDNS2 | 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.7 | IpAddress | read-write | The DNS2 address of switch. |
| sntp | 1.3.6.1.4.1.25972.0.5.20.2.4 | |||
| INT sntpClientStatus | 1.3.6.1.4.1.25972.0.5.20.2.4.1 | INTEGER | read-write | (1)Enable SNTP clinet. (2)Disable SNTP clinet. SNTP is simple network time protocol. Use this OID to Enable/Disable SNTP client. |
| INT sntpDaylightSavingTime | 1.3.6.1.4.1.25972.0.5.20.2.4.2 | INTEGER | read-write | (1)Enable Daylight Saving Time. (2)Disable Daylight Saving Time. Daylight Saving Time: Use this OID to Enable/Disable Daylight Saving Time. |
| INT sntpUTCTimezone | 1.3.6.1.4.1.25972.0.5.20.2.4.3 | INTEGER | read-write | UTC Timezone. |
| STR sntpServerAddress | 1.3.6.1.4.1.25972.0.5.20.2.4.4 | DisplayString | read-write | The address of a SNTP Server. |
| STR sntpSwitchTimer | 1.3.6.1.4.1.25972.0.5.20.2.4.5 | DisplayString | read-only | The switch timer. |
| STR sntpDaylightSavingPeriodStart | 1.3.6.1.4.1.25972.0.5.20.2.4.6 | DisplayString | read-write | The start-time of daylight saveing period, format: yyyymmdd hh:mm. |
| STR sntpDaylightSavingPeriodEnd | 1.3.6.1.4.1.25972.0.5.20.2.4.7 | DisplayString | read-write | The end-time of daylight saveing period, format: yyyymmdd hh:mm. |
| I32 sntpDaylightSavingOffset | 1.3.6.1.4.1.25972.0.5.20.2.4.8 | Integer32 | read-write | Daylight Saving Offset(Usually is 60 mins). When Enable and current time at Daylight Saving Period, the current time of the switch will be offseted by Daylight Saving Offset. |
| lldp | 1.3.6.1.4.1.25972.0.5.20.2.5 | |||
| INT lldpStatus | 1.3.6.1.4.1.25972.0.5.20.2.5.1 | INTEGER | read-write | LLDP Configuration. (1) Enable. (2) Disable. |
| I32 lldpInterval | 1.3.6.1.4.1.25972.0.5.20.2.5.2 | Integer32 | read-write | LLDP Interval. |
| autoProvision | 1.3.6.1.4.1.25972.0.5.20.2.6 | |||
| INT autoProvisionConfigurationStatus | 1.3.6.1.4.1.25972.0.5.20.2.6.1 | INTEGER | read-write | Auto Provision for Switch Configuration. (1) Enable. (2) Disable. |
| IP autoProvisionConfigurationServerip | 1.3.6.1.4.1.25972.0.5.20.2.6.2 | IpAddress | read-write | The IP address of TFTP server. |
| STR autoProvisionConfigurationFilename | 1.3.6.1.4.1.25972.0.5.20.2.6.3 | DisplayString | read-write | The filename of firmware. |
| INT autoProvisionImageStatus | 1.3.6.1.4.1.25972.0.5.20.2.6.4 | INTEGER | read-write | Auto Provision for firmware image. (1) Enable. (2) Disable. |
| IP autoProvisionImageServerip | 1.3.6.1.4.1.25972.0.5.20.2.6.5 | IpAddress | read-write | The IP address of TFTP server. |
| STR autoProvisionImageFilename | 1.3.6.1.4.1.25972.0.5.20.2.6.6 | DisplayString | read-write | The filename of firmware. |
| backupAndRestore | 1.3.6.1.4.1.25972.0.5.20.2.7 | |||
| IP backupServerIP | 1.3.6.1.4.1.25972.0.5.20.2.7.1 | IpAddress | read-write | The IP address of a TFTP server from which a firmware image can be uploaded. |
| STR backupAgentBoardFwFileName | 1.3.6.1.4.1.25972.0.5.20.2.7.2 | DisplayString | read-write | |
| INT backupStatus | 1.3.6.1.4.1.25972.0.5.20.2.7.3 | INTEGER | read-write | Setting this object to active(1) triger the TFTP upload action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. |
| IP restoreServerIP | 1.3.6.1.4.1.25972.0.5.20.2.7.4 | IpAddress | read-write | The IP address of a TFTP server from which a firmware image can be downloaded. |
| STR restoreAgentBoardFwFileName | 1.3.6.1.4.1.25972.0.5.20.2.7.5 | DisplayString | read-write | |
| INT restoreStatus | 1.3.6.1.4.1.25972.0.5.20.2.7.6 | INTEGER | read-write | Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. |
| upgradeFirmware | 1.3.6.1.4.1.25972.0.5.20.2.8 | |||
| IP tftpDownloadServerIP | 1.3.6.1.4.1.25972.0.5.20.2.8.1 | IpAddress | read-write | The IP address of a TFTP server from which a firmware image can be downloaded. |
| STR tftpDownloadAgentBoardFwFileName | 1.3.6.1.4.1.25972.0.5.20.2.8.2 | DisplayString | read-write | |
| INT tftpDownloadStatus | 1.3.6.1.4.1.25972.0.5.20.2.8.3 | INTEGER | read-write | Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. |
| dhcpServer | 1.3.6.1.4.1.25972.0.5.20.3 | |||
| dhcpServerCfgTable | 1.3.6.1.4.1.25972.0.5.20.3.1 | not-accessible | Table of descriptive information and configuration about DHCP server of the switch. | |
| dhcpServerCfgEntry | 1.3.6.1.4.1.25972.0.5.20.3.1.1 | not-accessible | An entry in the table, containing DHCP server information of the switch. | |
| I32 dhcpServerCfgIndex | 1.3.6.1.4.1.25972.0.5.20.3.1.1.1 | Integer32 | not-accessible | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| INT dhcpServerCfgStatus | 1.3.6.1.4.1.25972.0.5.20.3.1.1.2 | INTEGER | read-write | Parameter to enable or disable DHCP server function of the switch. When enabled, the device will be a DHCP server and provide the IP configurations for other DHCP clients. Note: Other items in this table couldn't be modified, when dhcpServerCfgStatus is disabled. |
| IP dhcpServerCfgLowIPAddr | 1.3.6.1.4.1.25972.0.5.20.3.1.1.3 | IpAddress | read-write | This object defines the low boundary of DHCP server IP pool. |
| IP dhcpServerCfgHighIPAddr | 1.3.6.1.4.1.25972.0.5.20.3.1.1.4 | IpAddress | read-write | This object defines the high boundary of DHCP server IP pool. |
| IP dhcpServerCfgSubMask | 1.3.6.1.4.1.25972.0.5.20.3.1.1.5 | IpAddress | read-write | The subnet mask of IP configuration for DHCP clients. |
| IP dhcpServerCfgGateway | 1.3.6.1.4.1.25972.0.5.20.3.1.1.6 | IpAddress | read-write | The gateway address of IP configuration for DHCP clients. |
| IP dhcpServerCfgDNS | 1.3.6.1.4.1.25972.0.5.20.3.1.1.7 | IpAddress | read-write | The DNS address of IP configuration for DHCP clients. |
| I32 dhcpServerCfgLeaseTime | 1.3.6.1.4.1.25972.0.5.20.3.1.1.8 | Integer32 | read-write | The lease time(in second) of DHCP clients. |
| dhcpServerClientInfoTable | 1.3.6.1.4.1.25972.0.5.20.3.2 | not-accessible | Table of descriptive information about current status of each DHCP client registered. | |
| dhcpServerClientInfoEntry | 1.3.6.1.4.1.25972.0.5.20.3.2.1 | not-accessible | An entry in the table, containing DHCP clients information. | |
| I32 dhcpServerClientInfoIndex | 1.3.6.1.4.1.25972.0.5.20.3.2.1.1 | Integer32 | read-only | Index of DHCP client. |
| STR dhcpServerClientInfoIPAddr | 1.3.6.1.4.1.25972.0.5.20.3.2.1.2 | DisplayString | read-only | The IP address of client. |
| STR dhcpServerClientInfoID | 1.3.6.1.4.1.25972.0.5.20.3.2.1.3 | DisplayString | read-only | The ID(MAC address) of client. |
| STR dhcpServerClientInfoType | 1.3.6.1.4.1.25972.0.5.20.3.2.1.4 | DisplayString | read-only | The type of client. bootptab: Entry comes from bootptab file. dynamic: Entry is dynamiclly created w/defaults for dhcp offer. sniffed: Entry is learned by snooping on net traffic. dbase: Entry is manually entered by user. |
| STR dhcpServerClientInfoStatus | 1.3.6.1.4.1.25972.0.5.20.3.2.1.5 | DisplayString | read-only | The status of client. Unassigned: none of the following. BOOTP: Entry has been assigned via plain bootp. DHCPOffer: Entry has a dhcp offer pending. DHCP: Entry has been assigned via DHCP. |
| I32 dhcpServerClientInfoLease | 1.3.6.1.4.1.25972.0.5.20.3.2.1.6 | Integer32 | read-only | The lease time of client(in second). |
| dhcpServerIPBindingTable | 1.3.6.1.4.1.25972.0.5.20.3.3 | not-accessible | Table of descriptive information and configuration about IP binding of DHCP server. | |
| dhcpServerIPBindingEntry | 1.3.6.1.4.1.25972.0.5.20.3.3.1 | not-accessible | An entry in the table, containing IP binding information of DHCP server. | |
| I32 dhcpServerIPBindingPortNum | 1.3.6.1.4.1.25972.0.5.20.3.3.1.1 | Integer32 | read-only | The port number. |
| IP dhcpServerIPBindingAddr | 1.3.6.1.4.1.25972.0.5.20.3.3.1.2 | IpAddress | read-write | The IP binding address. |
| portSetting | 1.3.6.1.4.1.25972.0.5.20.4 | |||
| portControl | 1.3.6.1.4.1.25972.0.5.20.4.1 | |||
| portCtrlTable | 1.3.6.1.4.1.25972.0.5.20.4.1.1 | not-accessible | Table of status information and configuration about each switch ports(including expansion slot). | |
| portCtrlEntry | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1 | not-accessible | An entry in the table, containing information about configuration in one switch port of the switch. | |
| I32 portCtrlIndex | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.1 | Integer32 | not-accessible | Index of port management table. |
| STR portCtrlPortName | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.2 | DisplayString | read-only | The name of port. |
| INT portCtrlPortStatus | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.3 | INTEGER | read-write | To disable (or enable) control of this port. |
| INT portCtrlNegotiation | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.4 | INTEGER | read-write | The mode of network negoticaion, (1)Automatic (2)Force |
| INT portCtrlSpeed | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.5 | INTEGER | read-write | Set the speed of the port. If portCtrlNegotiation is auto, this object can't be modified. |
| INT portCtrlDuplex | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.6 | INTEGER | read-write | Set full-duplex or half-duplex mode of the port. If portCtrlNegotiation is auto, this object can't be modified. |
| INT portCtrlFlowControl | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.7 | INTEGER | read-write | Set flow control. |
| INT portCtrlSecurity | 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.8 | INTEGER | read-write | Set port security. |
| rateLimiting | 1.3.6.1.4.1.25972.0.5.20.4.2 | |||
| rateLimitingTable | 1.3.6.1.4.1.25972.0.5.20.4.2.1 | not-accessible | Table of descriptive information and configuration about port rate limiting in this system. You can set up every port 3/4s bandwidth rate and packet limitation type. | |
| rateLimitingEntry | 1.3.6.1.4.1.25972.0.5.20.4.2.1.1 | not-accessible | An entry in the table, containing information about port rate limiting. | |
| I32 rateLimitingPortNum | 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.1 | Integer32 | read-only | Port number. |
| INT rateLimitingPortType | 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.2 | INTEGER | read-write | Limit Packet type: select the packet type that want to filter. The packet types have all type packet, broadcast/multicast/ unknown unicast packet, broadcast/multicast packet, and broadcast packet only. The broadcast/multicast/unknown unicast packet, broadcast/multicast packet, and broadcast packet only are only for ingress packet. The egress rate only supports all type packets. |
| I32 rateLimitingIngressRate | 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.3 | Integer32 | read-write | Ingress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit. |
| I32 rateLimitingEgressRate | 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.4 | Integer32 | read-write | Egress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit. |
| portTrunk | 1.3.6.1.4.1.25972.0.5.20.4.3 | |||
| aggregatorSetting | 1.3.6.1.4.1.25972.0.5.20.4.3.1 | |||
| I32 portTrunkSysPri | 1.3.6.1.4.1.25972.0.5.20.4.3.1.1 | Integer32 | read-write | The system priority of trunking. |
| portTrunkAggregatorTable | 1.3.6.1.4.1.25972.0.5.20.4.3.1.2 | not-accessible | Table of descriptive information and configuration about of each trunk group in this system. Link aggregation lets you group up to switch-port-num consecutive ports into a single dedicated connection. This feature can expand bandwidth to a device on the network, such as another switch or a server. | |
| portTrunkAggregatorEntry | 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1 | not-accessible | An entry in the table, containing information about aggregator setting of the trunk. | |
| I32 portTrunkAggregatorIndex | 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.1 | Integer32 | read-only | Index of trunk aggregator table. |
| STR portTrunkAggregatorGroupName | 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.2 | DisplayString | read-only | The name of trunk group. |
| POR portTrunkAggregatorMemberPorts | 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.3 | PortList | read-write | The members of trunk group. |
| INT portTrunkAggregatorLACPStatus | 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.4 | INTEGER | read-write | The LACP function of trunking. (1) LACP is enabled for the group. (2) LACP is disabled for the group. |
| I32 portTrunkAggregatorWorkPorts | 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.5 | Integer32 | read-write | The works ports of trunked group, the number of work ports should be equal to the count of members in static trunking(ie. LACP is disabled), and should not greater than the count of members in static/ dynamic trunking. |
| aggregatorStatus | 1.3.6.1.4.1.25972.0.5.20.4.3.2 | |||
| portTrunkAggregatorInfoTable | 1.3.6.1.4.1.25972.0.5.20.4.3.2.1 | not-accessible | Table of descriptive information about trunk group in this system. | |
| portTrunkAggregatorInfoEntry | 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1 | not-accessible | An entry in the table, containing information about the trunk group. | |
| I32 portTrunkAggregatorInfoIndex | 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.1 | Integer32 | read-only | Index of trunk information table. |
| STR portTrunkAggregatorInfoGroupName | 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.2 | DisplayString | read-only | The name of trunk group. |
| STR portTrunkAggregatorInfoDescription | 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.3 | DisplayString | read-only | The dscription of trunk group. |
| stateActivity | 1.3.6.1.4.1.25972.0.5.20.4.3.3 | |||
| portTrunkLACPStateActTable | 1.3.6.1.4.1.25972.0.5.20.4.3.3.1 | not-accessible | Table of descriptive information and configuration about of each trunk group in this system. | |
| portTrunkLACPStateActEntry | 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1 | not-accessible | An entry in the table, containing information about LACP state activity of the trunk. | |
| I32 portTrunkLACPStateActPortNum | 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.1 | Integer32 | read-only | Port number. |
| INT portTrunkLACPStateActStatus | 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.2 | INTEGER | read-write | The LACP state activity of the port. (1) Active. (2) Passive. (3) LACP doesn't be enabled. |
| redundancy | 1.3.6.1.4.1.25972.0.5.20.5 | |||
| redundantRing | 1.3.6.1.4.1.25972.0.5.20.5.1 | |||
| INT redundantRingStatus | 1.3.6.1.4.1.25972.0.5.20.5.1.1 | INTEGER | read-write | redundantRing function status. (1) redundantRing function is enabled. (2) redundantRing function is disabled. |
| INT redundantRingMasterStatus | 1.3.6.1.4.1.25972.0.5.20.5.1.2 | INTEGER | read-write | Ring Master function status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) |
| I32 redundantRingPort1 | 1.3.6.1.4.1.25972.0.5.20.5.1.3 | Integer32 | read-write | Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1). |
| I32 redundantRingPort2 | 1.3.6.1.4.1.25972.0.5.20.5.1.4 | Integer32 | read-write | Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1). |
| INT redundantRingCoupleRingStatus | 1.3.6.1.4.1.25972.0.5.20.5.1.5 | INTEGER | read-write | Couple Ring function status. (1) Couple Ring function is enabled. (2) Couple Ring function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) |
| I32 redundantRingCouplingPort | 1.3.6.1.4.1.25972.0.5.20.5.1.6 | Integer32 | read-write | Coupling Port. |
| INT redundantRingDualHomingStatus | 1.3.6.1.4.1.25972.0.5.20.5.1.7 | INTEGER | read-write | Couple Ring function status. (1) Dual Homing function is enabled. (2) Dual Homing function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) |
| I32 redundantRingHomingPort | 1.3.6.1.4.1.25972.0.5.20.5.1.8 | Integer32 | read-write | Homing Port. |
| INT redundantRingMasterHStatus | 1.3.6.1.4.1.25972.0.5.20.5.1.9 | INTEGER | read-only | Ring Master function hardware status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) |
| rstp | 1.3.6.1.4.1.25972.0.5.20.5.3 | |||
| INT rstpStatus | 1.3.6.1.4.1.25972.0.5.20.5.3.1 | INTEGER | read-write | Enable/Disable rapid spanning tree protocol for system. |
| I32 rstpPriority | 1.3.6.1.4.1.25972.0.5.20.5.3.2 | Integer32 | read-write | A value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. Enter a number 0 through 61440 in steps of 4096. If you change the value, you must restart RSTP. This item can't be modified, if rstpStatus was disabled. |
| I32 rstpMaxAge | 1.3.6.1.4.1.25972.0.5.20.5.3.3 | Integer32 | read-write | The number of seconds a bridge waits without receiving Spanning-Tree Protocol configuration messages before attempting a reconfiguration. Enter a number 6 through 40. Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled. |
| I32 rstpHelloTime | 1.3.6.1.4.1.25972.0.5.20.5.3.4 | Integer32 | read-write | The number of seconds between the transmission of Spanning-Tree Protocol configuration messages. Enter a number 1 through 10 Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled. |
| I32 rstpForwardDelayTime | 1.3.6.1.4.1.25972.0.5.20.5.3.5 | Integer32 | read-write | The number of seconds a port waits before changing from its Spanning-Tree Protocol learning and listening states to the forwarding state. Enter a number 4 through 30. Note:2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled. |
| rstpPerPortCfgTable | 1.3.6.1.4.1.25972.0.5.20.5.3.6 | not-accessible | Table of descriptive information and configuration about rapid spanning tree (Per port). | |
| rstpPerPortCfgEntry | 1.3.6.1.4.1.25972.0.5.20.5.3.6.1 | not-accessible | An entry in the table, containing configuration about RSTP (Per port). | |
| I32 rstpPerPortCfgPortNum | 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.1 | Integer32 | read-only | Port number. |
| I32 rstpPerPortCfgPathCost | 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.2 | Integer32 | read-write | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000. |
| I32 rstpPerPortCfgPriority | 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.3 | Integer32 | read-write | Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16. |
| INT rstpPerPortCfgAdminP2P | 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.4 | INTEGER | read-write | Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively. |
| INT rstpPerPortCfgAdminEdge | 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.5 | INTEGER | read-write | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages. |
| INT rstpPerPortCfgAdminNonStp | 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.6 | INTEGER | read-write | If true, this port will not participate in RSTP. |
| rstpRootBridgeInformationTable | 1.3.6.1.4.1.25972.0.5.20.5.3.7 | not-accessible | Table of descriptive information about root bridge of rapid spanning tree in this system. | |
| rstpRootBridgeInformationEntry | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1 | not-accessible | An entry in the table, containing information about root bridge information of the RSTP. | |
| I32 rstpRootBridgeInformationIndex | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.1 | Integer32 | not-accessible | Index of root bridge information table. |
| STR rstpRootBridgeInformationBridgeID | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.2 | DisplayString | read-only | Bridge ID. |
| I32 rstpRootBridgeInformationRootPriority | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.3 | Integer32 | read-only | Root Priority. |
| STR rstpRootBridgeInformationRootPort | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.4 | DisplayString | read-only | Root Port. |
| I32 rstpRootBridgeInformationRootPathCost | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.5 | Integer32 | read-only | Root Path Cost. |
| I32 rstpRootBridgeInformationMaxAge | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.6 | Integer32 | read-only | Max Age. |
| I32 rstpRootBridgeInformationHelloTime | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.7 | Integer32 | read-only | Hello Time. |
| I32 rstpRootBridgeInformationForwardDelay | 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.8 | Integer32 | read-only | Forward Delay Time. |
| rstpPerPortInfoTable | 1.3.6.1.4.1.25972.0.5.20.5.3.8 | not-accessible | Table of descriptive information and configuration about rapid spanning tree (Per port). | |
| rstpPerPortInfoEntry | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1 | not-accessible | An entry in the table, containing inforamtion about RSTP (Per port). | |
| I32 rstpPerPortInfoPortNum | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.1 | Integer32 | read-only | Port number. |
| I32 rstpPerPortInfoPathCost | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.2 | Integer32 | read-only | The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000. |
| I32 rstpPerPortInfoPriority | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.3 | Integer32 | read-only | Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16. |
| INT rstpPerPortInfoAdminP2P | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.4 | INTEGER | read-only | Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively. |
| INT rstpPerPortInfoAdminEdge | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.5 | INTEGER | read-only | Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages. |
| INT rstpPerPortInfoStpNeighbor | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.6 | INTEGER | read-only | |
| INT rstpPerPortInfoState | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.7 | INTEGER | read-only | |
| INT rstpPerPortInfoRole | 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.8 | INTEGER | read-only | |
| vlan | 1.3.6.1.4.1.25972.0.5.20.6 | |||
| INT vlanOperationMode | 1.3.6.1.4.1.25972.0.5.20.6.1 | INTEGER | read-write | The operation mode of vlan. (1)IEEE802.1Q VLAN, (2)Portbased VLAN, (3)VLAN is disabled. |
| INT vlanGVRP | 1.3.6.1.4.1.25972.0.5.20.6.2 | INTEGER | read-write | Enable GVRP Protocol. The item has no meaning, if the operation mode of vlan isn't IEEE802.1Q. |
| vlanIEEE8021QTable | 1.3.6.1.4.1.25972.0.5.20.6.3 | not-accessible | Table of descriptive information and configuration about IEEE802.1Q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks. | |
| vlanIEEE8021QEntry | 1.3.6.1.4.1.25972.0.5.20.6.3.1 | not-accessible | An entry in the table, containing information and configuration of IEEE802.1Q vlan. | |
| I32 vlanIEEE8021QIndex | 1.3.6.1.4.1.25972.0.5.20.6.3.1.1 | Integer32 | read-only | Index of IEEE802.1Q table. |
| STR vlanIEEE8021QPortName | 1.3.6.1.4.1.25972.0.5.20.6.3.1.2 | DisplayString | read-only | The name of port. |
| INT vlanIEEE8021QLinkType | 1.3.6.1.4.1.25972.0.5.20.6.3.1.3 | INTEGER | read-write | The type of port: (1)Access Link (2)Trunk Link (3)Hybrid Link |
| I32 vlanIEEE8021QUntaggedVid | 1.3.6.1.4.1.25972.0.5.20.6.3.1.4 | Integer32 | read-write | The untagged vid of port. This item can't be modified, if link type is trunklink. |
| STR vlanIEEE8021QTaggedVids | 1.3.6.1.4.1.25972.0.5.20.6.3.1.5 | DisplayString | read-write | The tagged vids of port. It's a descriptive statement of a list of tagged vids. Note: Every tagged vid is separated by a comma and no space-key be allowed. This item can't be modified, if link type is accesslink. |
| vlanIEEE8021QGroupTable | 1.3.6.1.4.1.25972.0.5.20.6.4 | not-accessible | Table of descriptive information and configuration of each ieee802.1q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks. | |
| vlanIEEE8021QGroupEntry | 1.3.6.1.4.1.25972.0.5.20.6.4.1 | not-accessible | An entry in the table, containing information about group name of the IEEE802.1Q vlan. | |
| I32 vlanIEEE8021QGroupVid | 1.3.6.1.4.1.25972.0.5.20.6.4.1.1 | Integer32 | read-only | Vlan ID. |
| STR vlanIEEE8021QGroupName | 1.3.6.1.4.1.25972.0.5.20.6.4.1.2 | DisplayString | read-write | The group name of vlan. |
| INT vlanIEEE8021QGroupStatus | 1.3.6.1.4.1.25972.0.5.20.6.4.1.3 | INTEGER | read-write | The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. |
| vlanPortBasedTable | 1.3.6.1.4.1.25972.0.5.20.6.5 | not-accessible | Table of descriptive information and configuration about of each port based vlan group in this system. Traffic is forwarded to the member ports of the same vlan group. By adding ports to the VLAN you have created one port-based vlan group completely | |
| vlanPortBasedEntry | 1.3.6.1.4.1.25972.0.5.20.6.5.1 | not-accessible | An entry in the table, containing information about port based vlan. | |
| I32 vlanPortBasedIndex | 1.3.6.1.4.1.25972.0.5.20.6.5.1.1 | Integer32 | read-only | Index of port-based vlan table. |
| STR vlanPortBasedGroupName | 1.3.6.1.4.1.25972.0.5.20.6.5.1.2 | DisplayString | read-create | The group name of vlan. |
| I32 vlanPortBasedVid | 1.3.6.1.4.1.25972.0.5.20.6.5.1.3 | Integer32 | read-create | The vid of vlan. Vid should be the value between 1 to 4094. |
| POR vlanPortBasedMembers | 1.3.6.1.4.1.25972.0.5.20.6.5.1.4 | PortList | read-create | The member mask of vlan. Note: If there were a trunking group, all of trunking members should be in the same vlan group. If some members of trunking group doesn't be included in vlan group, the SNMP agent reports error. |
| INT vlanPortBasedStatus | 1.3.6.1.4.1.25972.0.5.20.6.5.1.5 | INTEGER | read-create | The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. |
| snmp | 1.3.6.1.4.1.25972.0.5.20.7 | |||
| INT snmpAgentMode | 1.3.6.1.4.1.25972.0.5.20.7.1 | INTEGER | read-write | The Agent mode of snmp agent. (1) SNMPV1/V2C Only. (2) SNMPV3. (3) SNMPV1/V2C/V3 |
| STR snmpSystemName | 1.3.6.1.4.1.25972.0.5.20.7.2 | DisplayString | read-write | The system name. |
| STR snmpSystemLocation | 1.3.6.1.4.1.25972.0.5.20.7.3 | DisplayString | read-write | The system location. |
| STR snmpSystemContact | 1.3.6.1.4.1.25972.0.5.20.7.4 | DisplayString | read-write | The contact information of system. |
| snmpCommunityStringTable | 1.3.6.1.4.1.25972.0.5.20.7.5 | not-accessible | Table of descriptive and information about community string of SNMP agent. | |
| snmpCommunityStringEntry | 1.3.6.1.4.1.25972.0.5.20.7.5.1 | not-accessible | An entry in the table, containing inforamtion about community string of SNMP agent. | |
| I32 snmpCommunityStringIndex | 1.3.6.1.4.1.25972.0.5.20.7.5.1.1 | Integer32 | not-accessible | Index of community string. |
| STR snmpCommunityStringName | 1.3.6.1.4.1.25972.0.5.20.7.5.1.2 | DisplayString | read-write | The community string of SNMP agent. |
| INT snmpCommunityStringAttribute | 1.3.6.1.4.1.25972.0.5.20.7.5.1.3 | INTEGER | read-write | The attribute of community string. |
| INT snmpCommunityStringStatus | 1.3.6.1.4.1.25972.0.5.20.7.5.1.4 | INTEGER | read-create | The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent. |
| snmpTrapServerTable | 1.3.6.1.4.1.25972.0.5.20.7.6 | not-accessible | Table of descriptive and information about trap server of SNMP agent. | |
| snmpTrapServerEntry | 1.3.6.1.4.1.25972.0.5.20.7.6.1 | not-accessible | An entry in the table, containing inforamtion about trap server of SNMP agent. | |
| I32 snmpTrapServerIndex | 1.3.6.1.4.1.25972.0.5.20.7.6.1.1 | Integer32 | not-accessible | Index of trap server. |
| IP snmpTrapServerIPAddr | 1.3.6.1.4.1.25972.0.5.20.7.6.1.2 | IpAddress | read-write | Trap Server IP Address. |
| STR snmpTrapServerTrapComm | 1.3.6.1.4.1.25972.0.5.20.7.6.1.3 | DisplayString | read-write | The community string of trap server. |
| INT snmpTrapServerTrapVer | 1.3.6.1.4.1.25972.0.5.20.7.6.1.4 | INTEGER | read-write | The trap version. |
| INT snmpTrapServerStatus | 1.3.6.1.4.1.25972.0.5.20.7.6.1.5 | INTEGER | read-create | The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent. |
| trafficPrioritization | 1.3.6.1.4.1.25972.0.5.20.8 | |||
| INT qosPolicy | 1.3.6.1.4.1.25972.0.5.20.8.1 | INTEGER | read-write | (1)Using the 8, 4, 2, 1 weight fair queue scheme. (2)Use the strict priority scheme. Using the 8, 4, 2, 1 weight fair queue scheme: the switch will follow 8:4:2:1 rate to process priority queue from Hi to lowest queue. For example: the system will process 8 high queue packets, 4 middle queue packets, 2 low queue packets, and the one lowest queue packets at the same time. Use the strict priority scheme: Always higher queue will be process first, except higher queue is empty. |
| INT qosPriorityType | 1.3.6.1.4.1.25972.0.5.20.8.2 | INTEGER | read-write | (1)Port Base (2)COS only (3)TOS only (4)COS first (5)TOS first (6)Disabled Port-base: the port priority will follow the default port priority that you have assigned - High, middle, low, or lowest. COS only: the port priority will only follow the COS priority that you have assigned. TOS only: the port priority will only follow the TOS priority that you have assigned. COS first: the port priority will follow the COS priority first, and then other priority rule. TOS first: the port priority will follow the TOS priority first, and the other priority rule. |
| qosPortBasedPriorityTable | 1.3.6.1.4.1.25972.0.5.20.8.3 | not-accessible | Table of descriptive information and configuration about PortBased QOS. | |
| qosPortBasedPriorityEntry | 1.3.6.1.4.1.25972.0.5.20.8.3.1 | not-accessible | An entry in the table, containing inforamtion about PortBased QOS. | |
| I32 qosPortBasedPriorityPortNum | 1.3.6.1.4.1.25972.0.5.20.8.3.1.1 | Integer32 | read-only | Port number. |
| INT qosPortBasedPriority | 1.3.6.1.4.1.25972.0.5.20.8.3.1.2 | INTEGER | read-write | The port priority will follow the default port priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. |
| qosCOSTable | 1.3.6.1.4.1.25972.0.5.20.8.4 | not-accessible | Table of descriptive information and configuration about PortBased QOS. | |
| qosCOSEntry | 1.3.6.1.4.1.25972.0.5.20.8.4.1 | not-accessible | An entry in the table, containing inforamtion about COS QOS. | |
| I32 qosCOSPriority | 1.3.6.1.4.1.25972.0.5.20.8.4.1.1 | Integer32 | read-only | COS priority. |
| INT qosCOS | 1.3.6.1.4.1.25972.0.5.20.8.4.1.2 | INTEGER | read-write | The port priority will follow the COS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. |
| qosCOSPortDefaultTable | 1.3.6.1.4.1.25972.0.5.20.8.5 | not-accessible | Table of descriptive information and configuration about PortBased QOS. | |
| qosCOSPortDefaultEntry | 1.3.6.1.4.1.25972.0.5.20.8.5.1 | not-accessible | An entry in the table, containing inforamtion about COS QOS. | |
| I32 qosCOSPort | 1.3.6.1.4.1.25972.0.5.20.8.5.1.1 | Integer32 | read-only | COS Default Panel Port. |
| I32 qosCOSPortDefault | 1.3.6.1.4.1.25972.0.5.20.8.5.1.2 | Integer32 | read-write | COS Default Panel Port Priority. |
| qosTOSTable | 1.3.6.1.4.1.25972.0.5.20.8.6 | not-accessible | Table of descriptive information and configuration about PortBased QOS. | |
| qosTOSEntry | 1.3.6.1.4.1.25972.0.5.20.8.6.1 | not-accessible | An entry in the table, containing inforamtion about TOS QOS. | |
| I32 qosTOSPriority | 1.3.6.1.4.1.25972.0.5.20.8.6.1.1 | Integer32 | read-only | TOS priority. |
| INT qosTOS | 1.3.6.1.4.1.25972.0.5.20.8.6.1.2 | INTEGER | read-write | The port priority will follow the TOS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. |
| multicast | 1.3.6.1.4.1.25972.0.5.20.9 | |||
| igmp | 1.3.6.1.4.1.25972.0.5.20.9.1 | |||
| INT igmpStatus | 1.3.6.1.4.1.25972.0.5.20.9.1.1 | INTEGER | read-write | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite. IP manages multicast traffic by using switches, routers, and hosts that support IGMP. Enabling IGMP allows the ports to detect IGMP queries and report packets and manage IP multicast traffic through the switch. IGMP have three fundamental types of message as follows: Message Description -------------------------------------------------------------- Query A message sent from the querier (IGMP router or switch) asking for a response from each host belonging to the multicast group. Report A message sent by a host to the querier to indicate that the host wants to be or is a member of a given group indicated in the report message. Leave Group A message sent by a host to the querier to indicate that the host has quit to be a member of a specific multicast group. You can enable IGMP protocol and IGMP Query function. You will see the IGMP snooping information in this section -- difference multicast group VID and member port, and IP multicast addresses range from 224.0.0.0 through 239.255.255.255. |
| INT igmpQuery | 1.3.6.1.4.1.25972.0.5.20.9.1.2 | INTEGER | read-write | (1)Detect querier automatically. (2)Force to be a querier. (3)Be a silence snooper. The mode of querier. |
| igmpEntriesTable | 1.3.6.1.4.1.25972.0.5.20.9.1.3 | not-accessible | Table of descriptive information about IGMP entries. | |
| igmpEntriesEntry | 1.3.6.1.4.1.25972.0.5.20.9.1.3.1 | not-accessible | An entry in the table, containing inforamtion about IGMP. | |
| I32 igmpEntriesEntryIndex | 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.1 | Integer32 | read-only | Index of IGMP table. |
| IP igmpEntriesEntryIPAddr | 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.2 | IpAddress | read-only | The IP address of an IGMP entry. |
| I32 igmpEntriesEntryVID | 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.3 | Integer32 | read-only | The VLAN ID of an IGMP entry. |
| POR igmpEntriesEntryMembers | 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.4 | PortList | read-only | The member ports mask of IGMP entry. |
| multicastfiltering | 1.3.6.1.4.1.25972.0.5.20.9.3 | |||
| multicastfilteringEntriesTable | 1.3.6.1.4.1.25972.0.5.20.9.3.1 | not-accessible | Table of descriptive information about multicast filtering entries. | |
| multicastfilteringEntriesEntry | 1.3.6.1.4.1.25972.0.5.20.9.3.1.1 | not-accessible | An entry in the table, containing inforamtion about multicast filtering entries. | |
| I32 multicastFilteringIndex | 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.1 | Integer32 | not-accessible | This object identifies the switch within the system for which this entry contains information. |
| IP multicastFilteringAddr | 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.2 | IpAddress | read-write | Group IP Address. |
| POR multicastFilteringMemberports | 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.3 | PortList | read-create | The member mask of group. |
| INT multicastFilteringStatus | 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.4 | INTEGER | read-create | The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. |
| security | 1.3.6.1.4.1.25972.0.5.20.10 | |||
| ipSecurityMgt | 1.3.6.1.4.1.25972.0.5.20.10.1 | |||
| INT ipSecurityStatus | 1.3.6.1.4.1.25972.0.5.20.10.1.1 | INTEGER | read-write | IP Security function status. (1) IP Security function is enabled. (2) IP Security function is disabled. |
| INT ipSecurityHTTPServerStatus | 1.3.6.1.4.1.25972.0.5.20.10.1.2 | INTEGER | read-write | IP Security function status. (1) IP Security of HTTP server function is enabled. (2) IP Security of HTTP server function is disabled. |
| INT ipSecurityTelnetServerStatus | 1.3.6.1.4.1.25972.0.5.20.10.1.3 | INTEGER | read-write | IP Security function status. (1) IP Security of telnet server function is enabled. (2) IP Security of telnet server function is disabled. |
| INT ipSecuritySNMPServerStatus | 1.3.6.1.4.1.25972.0.5.20.10.1.4 | INTEGER | read-write | IP Security function status. (1) IP Security of SNMP server function is enabled. (2) IP Security of SNMP server function is disabled. |
| IP ipSecuritySecurityIP1 | 1.3.6.1.4.1.25972.0.5.20.10.1.5 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP2 | 1.3.6.1.4.1.25972.0.5.20.10.1.6 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP3 | 1.3.6.1.4.1.25972.0.5.20.10.1.7 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP4 | 1.3.6.1.4.1.25972.0.5.20.10.1.8 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP5 | 1.3.6.1.4.1.25972.0.5.20.10.1.9 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP6 | 1.3.6.1.4.1.25972.0.5.20.10.1.10 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP7 | 1.3.6.1.4.1.25972.0.5.20.10.1.11 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP8 | 1.3.6.1.4.1.25972.0.5.20.10.1.12 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP9 | 1.3.6.1.4.1.25972.0.5.20.10.1.13 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| IP ipSecuritySecurityIP10 | 1.3.6.1.4.1.25972.0.5.20.10.1.14 | IpAddress | read-write | This IP address can access and manage the switch through the Web browser. |
| portSecurityMgt | 1.3.6.1.4.1.25972.0.5.20.10.2 | |||
| portSecurityTable | 1.3.6.1.4.1.25972.0.5.20.10.2.1 | not-accessible | Table of descriptive information about static MAC per port configuration. When you add a static MAC address, it remains in the switch's address table, regardless of whether the device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or powered-off device is active on the network again. | |
| portSecurityEntry | 1.3.6.1.4.1.25972.0.5.20.10.2.1.1 | not-accessible | An entry in the table, containing inforamtion about static MAC per port configuration. | |
| I32 portSecurityIndex | 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.1 | Integer32 | not-accessible | Index of MAC. |
| STR portSecurityPortName | 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.2 | DisplayString | read-write | The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry. |
| MAC portSecurityAddr | 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.3 | MacAddress | read-write | MAC address of the entry. |
| INT portSecurityStatus | 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.4 | INTEGER | read-create | The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent. |
| macBlacklist | 1.3.6.1.4.1.25972.0.5.20.10.3 | |||
| macBlacklistTable | 1.3.6.1.4.1.25972.0.5.20.10.3.1 | not-accessible | Table of descriptive information about MAC filter configuration. MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses. For example, if your network is congested because of high utilization from one MAC address, you can filter all traffic transmitted to that MAC address, restoring network flow while you troubleshoot the problem. | |
| macBlacklistEntry | 1.3.6.1.4.1.25972.0.5.20.10.3.1.1 | not-accessible | An entry in the table, containing inforamtion about MAC filter configuration. | |
| I32 macBlacklistIndex | 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.1 | Integer32 | not-accessible | Index of MAC. |
| MAC macBlacklistAddr | 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.2 | MacAddress | read-write | MAC address of the entry. |
| INT macBlacklistStatus | 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.3 | INTEGER | read-create | The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent. |
| ieee8021x | 1.3.6.1.4.1.25972.0.5.20.10.4 | |||
| radiusServerSetting | 1.3.6.1.4.1.25972.0.5.20.10.4.1 | |||
| INT radius8021xProtocolStatus | 1.3.6.1.4.1.25972.0.5.20.10.4.1.1 | INTEGER | read-write | IEEE802.1x protocol function status. (1) IEEE802.1x protocol function is enabled. (2) IEEE802.1x protocol function is disabled. 802.1x makes use of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of preventing access to that port in cases in which the authentication and authorization process fails. |
| IP radiusServerIP | 1.3.6.1.4.1.25972.0.5.20.10.4.1.2 | IpAddress | read-write | Radius Server IP Address: the ip address of the authentication server. |
| I32 radiusServerPort | 1.3.6.1.4.1.25972.0.5.20.10.4.1.3 | Integer32 | read-write | Server Port: The UDP port number used by the authentication server to authenticate. |
| I32 radiusAccountingPort | 1.3.6.1.4.1.25972.0.5.20.10.4.1.4 | Integer32 | read-write | Accounting Port: The UDP port number used by the authentication server to retrieve accounting information. |
| STR radiusSharedKey | 1.3.6.1.4.1.25972.0.5.20.10.4.1.5 | DisplayString | read-write | Shared Key: A key shared between this switch and authentication server. |
| STR radiusNASIdentifier | 1.3.6.1.4.1.25972.0.5.20.10.4.1.6 | DisplayString | read-write | NAS Identifier: A string used to identify this switch. |
| I32 radiusMiscQuietPeriod | 1.3.6.1.4.1.25972.0.5.20.10.4.1.7 | Integer32 | read-write | Quiet Period: used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 seconds). |
| I32 radiusMiscTxPeriod | 1.3.6.1.4.1.25972.0.5.20.10.4.1.8 | Integer32 | read-write | Tx Period: used to determine when an EAPOL PDU is to be transmitted(Default value is 30 seconds). |
| I32 radiusMiscSupplicantTimeout | 1.3.6.1.4.1.25972.0.5.20.10.4.1.9 | Integer32 | read-write | Supplicant Timeout: used to determine timeout conditions in the exchanges between the supplicant and authentication server(Default value is 30 seconds). |
| I32 radiusMiscServerTimeout | 1.3.6.1.4.1.25972.0.5.20.10.4.1.10 | Integer32 | read-write | Server Timeout: used to determine timeout conditions in the exchanges between the authenticator and authentication server(Default value is 30 seconds). |
| I32 radiusMiscReAuthMax | 1.3.6.1.4.1.25972.0.5.20.10.4.1.11 | Integer32 | read-write | ReAuthMax: used to determine the number of reauthentication attempts that are permitted before the specific port becomes unauthorized (Default value is 2 times). |
| I32 radiusMiscReauthPeriod | 1.3.6.1.4.1.25972.0.5.20.10.4.1.12 | Integer32 | read-write | Reauth Period: used to determine a nonzero number of seconds between periodic reauthentication of the supplications(Default value is 3600 seconds). |
| portAuthConfiguration | 1.3.6.1.4.1.25972.0.5.20.10.4.2 | |||
| radiusPerPortCfgTable | 1.3.6.1.4.1.25972.0.5.20.10.4.2.1 | not-accessible | Table of descriptive information and configuration about Radius per port configuration. | |
| radiusPerPortCfgEntry | 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1 | not-accessible | An entry in the table, containing inforamtion about Radius per port configuration. | |
| I32 radiusPerPortCfgIndex | 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.1 | Integer32 | not-accessible | Index of port. |
| STR radiusPerPortCfgPortName | 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.2 | DisplayString | read-only | The name of port. |
| INT radiusPerPortCfgState | 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.3 | INTEGER | read-write | You can select the specific port and configure the authorization state. Each port can select four kinds of authorization state : Reject: force the specific port to be unauthorized. Accept: force the specific port to be authorized. Authorize: the state of the specific port was determinied by the outcome of the authentication. Disable: the specific port didn't support 802.1x function. |
| warning | 1.3.6.1.4.1.25972.0.5.20.11 | |||
| faultAlarm | 1.3.6.1.4.1.25972.0.5.20.11.1 | |||
| INT faultAlarmPwr1 | 1.3.6.1.4.1.25972.0.5.20.11.1.1 | INTEGER | read-write | State of Power1 failure alarm. |
| INT faultAlarmPwr2 | 1.3.6.1.4.1.25972.0.5.20.11.1.2 | INTEGER | read-write | State of Power1 failure alarm. |
| faultAlarmPortCfgTable | 1.3.6.1.4.1.25972.0.5.20.11.1.3 | not-accessible | Table of descriptive information and configuration about fault alarm per port configuration. | |
| faultAlarmPortCfgEntry | 1.3.6.1.4.1.25972.0.5.20.11.1.3.1 | not-accessible | An entry in the table, containing inforamtion about falut alarm per port configuration. | |
| I32 faultAlarmPortCfgNum | 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.1 | Integer32 | read-only | Index of port. |
| INT faultAlarmPortLinkStatus | 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.2 | INTEGER | read-write | State of Port Link Down/Broken failure alarm. |
| sysLogConfiguration | 1.3.6.1.4.1.25972.0.5.20.11.2 | |||
| INT syslogStatus | 1.3.6.1.4.1.25972.0.5.20.11.2.1 | INTEGER | read-write | Parameter to specify the log should be sent to syslog server, or the log should be kept in switch. When disabled, the switch won't send out or record any log. |
| IP eventServerAddr | 1.3.6.1.4.1.25972.0.5.20.11.2.2 | IpAddress | read-write | The IP address of syslog server. It can't be modified when syslogStatus is disabled. |
| smtpConfiguration | 1.3.6.1.4.1.25972.0.5.20.11.3 | |||
| INT eventEmailAlertStatus | 1.3.6.1.4.1.25972.0.5.20.11.3.1 | INTEGER | read-write | Parameter to enable the Email alert feature, When enabled, the switch will send the mail to the address presented in emailAlertRcptTable. |
| STR eventEmailAlertAddr | 1.3.6.1.4.1.25972.0.5.20.11.3.2 | DisplayString | read-write | The IP address of SMTP server. It can't be modified when eventEmailAlertStatus is disabled. |
| INT eventEmailAlertAuthentication | 1.3.6.1.4.1.25972.0.5.20.11.3.3 | INTEGER | read-write | Parameter to enable the authentication feature SMTP server. It can't be modified when eventEmailAlertStatus is disabled. |
| STR eventEmailAlertAccount | 1.3.6.1.4.1.25972.0.5.20.11.3.4 | DisplayString | read-write | The Email account for SMTP server. It can't be modified when eventEmailAlertAuthentication is disabled. |
| STR eventEmailAlertPassword | 1.3.6.1.4.1.25972.0.5.20.11.3.5 | DisplayString | write-only | The password of Email account. It can't be modified when eventEmailAlertAuthentication is disabled. |
| emailAlertRcptTable | 1.3.6.1.4.1.25972.0.5.20.11.3.6 | not-accessible | Table of descriptive information of recipient Email address list. | |
| emailAlertRcptEntry | 1.3.6.1.4.1.25972.0.5.20.11.3.6.1 | not-accessible | An entry in the table, containing recipient Email addresses. | |
| I32 eventEmailAlertRcptIndex | 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.1 | Integer32 | read-only | Index of recipient Email address. |
| STR eventEmailAlertRcptEmailAddr | 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.2 | DisplayString | read-write | The recipient Email address. |
| eventSelection | 1.3.6.1.4.1.25972.0.5.20.11.4 | |||
| systemEventsTable | 1.3.6.1.4.1.25972.0.5.20.11.4.1 | not-accessible | Table of descriptive information about system events. | |
| systemEventsEntry | 1.3.6.1.4.1.25972.0.5.20.11.4.1.1 | read-only | An entry in the table, containing type of system events. | |
| I32 eventSystemEventsIndex | 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.1 | Integer32 | not-accessible | Index of events. |
| INT eventDeviceRestartEvent | 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.2 | INTEGER | read-write | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. |
| INT eventPowerStatusEvent | 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.3 | INTEGER | read-write | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. |
| INT eventAuthenticationFailureEvent | 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.4 | INTEGER | read-write | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. |
| INT eventRingTopologyChangeEvent | 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.5 | INTEGER | read-write | Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. |
| portEventsTable | 1.3.6.1.4.1.25972.0.5.20.11.4.2 | not-accessible | Table of descriptive information about port events. | |
| portEventsEntry | 1.3.6.1.4.1.25972.0.5.20.11.4.2.1 | not-accessible | An entry in the table, containing type of port events. | |
| I32 eventPortNumber | 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.1 | Integer32 | read-only | Port number for port event table. |
| INT eventPortEventLog | 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.2 | INTEGER | read-write | Parameter to indicate the which event should be logged. The value can't be modified, if syslogStatus is disabled. |
| INT eventPortEventSMTP | 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.3 | INTEGER | read-write | Parameter to indicate the which event should be an Email alert. The value can't be modified, if eventEmailAlertStatus is disabled. |
| monitorAndDiag | 1.3.6.1.4.1.25972.0.5.20.12 | |||
| macAddressTable | 1.3.6.1.4.1.25972.0.5.20.12.1 | |||
| I32 agingTimeSetting | 1.3.6.1.4.1.25972.0.5.20.12.1.1 | Integer32 | read-write | The MAC address table flush time. |
| INT flushMACStatus | 1.3.6.1.4.1.25972.0.5.20.12.1.2 | INTEGER | read-write | (1)Enable Flush MAC address table when ports link down. (2)Disable Flush MAC address table when ports link down. |
| macAddrTable | 1.3.6.1.4.1.25972.0.5.20.12.1.3 | not-accessible | Table of descriptive information about MAC filter configuration. | |
| macAddrEntry | 1.3.6.1.4.1.25972.0.5.20.12.1.3.1 | not-accessible | An entry in the table, containing inforamtion about all MAC configuration. | |
| MAC macAddressAddr | 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.1 | MacAddress | read-only | MAC address of the entry. |
| STR macAddressPortName | 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.2 | DisplayString | read-only | The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry. |
| INT macAddressType | 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.3 | INTEGER | read-only | The type of this entry. |
| INT portSecurityClearMACTable | 1.3.6.1.4.1.25972.0.5.20.12.1.4 | INTEGER | read-write | Set to active for cleaning all the MAC entries in MAC table. |
| portStatistic | 1.3.6.1.4.1.25972.0.5.20.12.2 | |||
| switchPortStatTable | 1.3.6.1.4.1.25972.0.5.20.12.2.1 | not-accessible | Table of descriptive and statistics information about each switch ports(including expansion slot). | |
| switchPortStatEntry | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1 | not-accessible | An entry in the table, containing information about statistics in one switch port of the switch. | |
| I32 swPortStatIndex | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.1 | Integer32 | not-accessible | Index of port statistic table. |
| STR swPortStatType | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.2 | DisplayString | read-only | Indicates the port type. |
| INT swPortStatLink | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.3 | INTEGER | read-only | Indicates the link state. |
| INT swPortStatState | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.4 | INTEGER | read-only | Indicates the port state |
| I32 swPortStatTXGoodPkt | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.5 | Integer32 | read-only | The count of good packets of TX. |
| I32 swPortStatTXBadPkt | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.6 | Integer32 | read-only | The count of bad packets of TX. |
| I32 swPortStatRXGoodPkt | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.7 | Integer32 | read-only | The count of good packets of RX. |
| I32 swPortStatRXBadPkt | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.8 | Integer32 | read-only | The count of bad packets of RX. |
| I32 swPortStatTXAbortPkt | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.9 | Integer32 | read-only | The count of abort packets of TX. |
| I32 swPortStatPacketCollision | 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.10 | Integer32 | read-only | The count of collision. |
| portmirroring | 1.3.6.1.4.1.25972.0.5.20.12.3 | |||
| I32 swPortMirrorDestinationPortTX | 1.3.6.1.4.1.25972.0.5.20.12.3.1 | Integer32 | read-write | The TX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray. |
| I32 swPortMirrorDestinationPortRX | 1.3.6.1.4.1.25972.0.5.20.12.3.2 | Integer32 | read-write | The RX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray. |
| switchPortMirrorSourceTable | 1.3.6.1.4.1.25972.0.5.20.12.3.3 | not-accessible | Table of descriptive information and configuration of port mirror in this system. The Port Sniffer is a method for monitor traffic in switched networks. Use this tabe to select monitor port for this switch. | |
| switchPortMirrorSourceEntry | 1.3.6.1.4.1.25972.0.5.20.12.3.3.1 | not-accessible | An entry in the table, containing information about port mirror. | |
| I32 swPortMirrorPortNum | 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.1 | Integer32 | read-only | Port number. |
| INT swPortMirrorSourcePort | 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.2 | INTEGER | read-write | The mode of source port (monitor port). (1) TX only. (2) RX only. (3) RX and TX. (4) Source port is disabled. The ports you want to monitor. All source port traffic will be copied to destination port (sniffer port). |
| eventLog | 1.3.6.1.4.1.25972.0.5.20.12.4 | |||
| eventLogTable | 1.3.6.1.4.1.25972.0.5.20.12.4.1 | not-accessible | Table of descriptive information about logs. | |
| eventLogEntry | 1.3.6.1.4.1.25972.0.5.20.12.4.1.1 | not-accessible | An entry in the table, containing list of logs. | |
| I32 eventLogIndex | 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.1 | Integer32 | read-only | Index of log. |
| STR eventLogDescription | 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.2 | DisplayString | read-only | The description of log. |
| saveConfiguration | 1.3.6.1.4.1.25972.0.5.20.13 | |||
| INT saveCfgMgtAction | 1.3.6.1.4.1.25972.0.5.20.13.1 | INTEGER | read-write | Setting this object to active(1) triger saving current configuration. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. |
| factoryDefault | 1.3.6.1.4.1.25972.0.5.20.14 | |||
| INT factoryDefaultAction | 1.3.6.1.4.1.25972.0.5.20.14.1 | INTEGER | read-write | Setting this object to keep-ip-and-username-password(1), keep-ip(2), keep-username-password(3) , and keep-nothing(4), triger loading facotory default configuration. Setting this object to notActive(5) has no effect. The system always returns the value notActive(5) when this object is read. |
| systemReboot | 1.3.6.1.4.1.25972.0.5.20.15 | |||
| INT systemRebootAction | 1.3.6.1.4.1.25972.0.5.20.15.1 | INTEGER | read-write | Setting this object to active(1) triger the system restart. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. |
| misc | 1.3.6.1.4.1.25972.0.5.20.24 | |||
| specificTrap | 1.3.6.1.4.1.25972.0.5.20.24.1 | |||
| INT trapPowerStatus | 1.3.6.1.4.1.25972.0.5.20.24.1.1 | INTEGER | read-only | Indicates the switch power status |
| I32 trapTopologyChange | 1.3.6.1.4.1.25972.0.5.20.24.1.2 | Integer32 | read-only | redundantRing topology change counter. |
| switchCurrentPortNameListTable | 1.3.6.1.4.1.25972.0.5.20.24.2 | not-accessible | Table of descriptive and status information about the logical ports in this system. | |
| switchCurrentPortNameListEntry | 1.3.6.1.4.1.25972.0.5.20.24.2.1 | not-accessible | An entry in the table, containing information about logical port name in this system. | |
| I32 swCurrentPortNameListIndex | 1.3.6.1.4.1.25972.0.5.20.24.2.1.1 | Integer32 | not-accessible | Index of logical port. |
| STR swCurrentPortNameListPortName | 1.3.6.1.4.1.25972.0.5.20.24.2.1.2 | DisplayString | read-only | The name of logical port. |
| STR swCurrentPortNameListPortNumber | 1.3.6.1.4.1.25972.0.5.20.24.2.1.3 | DisplayString | read-only | The port number(s) that port name belong to. If the logical port stood for a trunk group, this object shows the members of trunk group. |
| powerOverEthernet | 1.3.6.1.4.1.25972.0.5.20.25 | |||
| poeSystemSetting | 1.3.6.1.4.1.25972.0.5.20.25.1 | |||
| I32 poeMaximumPowerAvailable | 1.3.6.1.4.1.25972.0.5.20.25.1.1 | Integer32 | read-write | |
| I32 poeActualPowerConsumption | 1.3.6.1.4.1.25972.0.5.20.25.1.2 | Integer32 | read-only | |
| INT poePortKnockoffDisabled | 1.3.6.1.4.1.25972.0.5.20.25.1.3 | INTEGER | read-write | Port Knockoff Disabled |
| INT poeACDisconnect | 1.3.6.1.4.1.25972.0.5.20.25.1.4 | INTEGER | read-write | AC Disconnect |
| INT poeCapacitiveDetection | 1.3.6.1.4.1.25972.0.5.20.25.1.5 | INTEGER | read-write | Capacitive Detection |
| poePortStatus | 1.3.6.1.4.1.25972.0.5.20.25.2 | |||
| poePortStatusTable | 1.3.6.1.4.1.25972.0.5.20.25.2.1 | not-accessible | ||
| poePortStatusEntry | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1 | not-accessible | ||
| I32 poePortStatusIndex | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.1 | Integer32 | read-only | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| INT poePortStatusLink | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.2 | INTEGER | read-only | |
| INT poePortStatusState | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.3 | INTEGER | read-only | |
| I32 poePortStatusCurrent | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.4 | Integer32 | read-only | Current(mA) |
| STR poePortStatusVoltage | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.5 | DisplayString | read-only | Voltage(V) |
| I32 poePortStatusPower | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.6 | Integer32 | read-only | Power(mW) |
| STR poePortStatusDeterminedClass | 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.7 | DisplayString | read-only | |
| poePortControl | 1.3.6.1.4.1.25972.0.5.20.25.3 | |||
| poePortControlTable | 1.3.6.1.4.1.25972.0.5.20.25.3.1 | not-accessible | ||
| poePortControlEntry | 1.3.6.1.4.1.25972.0.5.20.25.3.1.1 | not-accessible | ||
| I32 poePortControlIndex | 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.1 | Integer32 | read-only | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| INT poePortControlState | 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.2 | INTEGER | read-write | State |
| INT poePortControlPowerLimitFromClassification | 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.3 | INTEGER | read-write | Power Limit From Classification |
| INT poePortControlLegacy | 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.4 | INTEGER | read-write | Legacy |
| INT poePortControlPriority | 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.5 | INTEGER | read-write | Priority |
| I32 poePortControlPowerLimit | 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.6 | Integer32 | read-write | Power Limit (<15400)mW |
RFC description
MIB module for an Industrial Ethernet Switch (NIS-3500-2208PCE) providing management objects for system information, DHCP, VLAN, SNMP, security, and POE configuration.
Start monitoring NIS 3500-2208PCE Industrial Ethernet Switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.