All MIBs › NETSTAR-MIB
Category: Network Management
Description: Defines management objects for NetStar network device configuration and operational monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NETSTAR-MIB?
NETSTAR-MIB is a vendor MIB for NetStar network devices, referencing product lines including the Gigarouter and ClusterSwitch. No module description was available, and the sample objects consist mainly of the top-level organizational identifiers (netstar, netstar-products, netstar-daemons, gigarouter, clusterswitch, gr2) rather than runtime data objects, suggesting this entry primarily defines the OID tree/registration structure rather than exposing monitorable leaf objects directly. Where such a MIB does expose runtime data, it would typically cover routing/switching hardware status such as interface state, daemon/process health, and chassis status for the Gigarouter and ClusterSwitch product lines. Any actual monitoring objects would likely reside in per-product sub-MIBs branching from this registration structure. It would have been deployed in high-speed core routing/switching environments where NetStar Gigarouter or ClusterSwitch hardware was installed. Engineers can download the NETSTAR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in NETSTAR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- NetStar Gigarouter
- NetStar ClusterSwitch
Monitoring Examples
The sample objects available (netstar, netstar-products, netstar-daemons, gigarouter, clusterswitch, gr2) are organizational/registration identifiers rather than runtime monitoring objects, so a concrete polling scenario cannot be honestly constructed from this data; these OIDs mainly serve as the root nodes under which product-specific management objects for the Gigarouter and ClusterSwitch would be defined.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| OBJECT-TYPE | |
| enterprises |
From RFC1213-MIB
| ifDescr | |
| ifInOctets | |
| ifIndex | |
| ifOutOctets | |
| snmp |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| atmpDaemon | 1.3.6.1.4.1.1080.2.5 | |||
| NTF authenticationFailure | 1.3.6.1.2.1.11.0.4 | An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While implementations of the SNMP must be capable of generating this trap, they must also be capable of suppressing the emission of such traps via an implementation- specific mechanism. | ||
| clusterswitch | 1.3.6.1.4.1.1080.1.2 | |||
| NTF coldStart | 1.3.6.1.2.1.11.0.0 | A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered. | ||
| dynamicRoutingDaemon | 1.3.6.1.4.1.1080.2.3 | |||
| frameRelayDaemon | 1.3.6.1.4.1.1080.2.2 | |||
| gigarouter | 1.3.6.1.4.1.1080.1.1 | |||
| gr2 | 1.3.6.1.4.1.1080.1.3 | |||
| grAtmp | 1.3.6.1.4.1.1080.1.1.8 | |||
| NTF grAtmPVCDown | 1.3.6.1.4.1.1080.1.1.0.17 | The trap issued when an ATM Permanent Virtual circuit is disabled | ||
| NTF grAtmPVCUp | 1.3.6.1.4.1.1080.1.1.0.16 | The trap issued when an ATM Permanent Virtual circuit is enabled | ||
| grAtmUNI | 1.3.6.1.4.1.1080.1.1.5 | |||
| grAtmV1 | 1.3.6.1.4.1.1080.1.1.4 | |||
| grAtmV1NetToVcEntry | 1.3.6.1.4.1.1080.1.1.4.4.1 | not-accessible | A grAtmV1NetToVc entry representing a mapping from an IP address to an ATM virtual channel. | |
| INT grAtmV1NetToVcIfIndex | 1.3.6.1.4.1.1080.1.1.4.4.1.1 | INTEGER | read-write | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| IP grAtmV1NetToVcNetAddress | 1.3.6.1.4.1.1080.1.1.4.4.1.2 | IpAddress | read-write | The IpAddress corresponding to the virtual channel. |
| INT grAtmV1NetToVcState | 1.3.6.1.4.1.1080.1.1.4.4.1.5 | INTEGER | read-write | The operational state of this entry. |
| grAtmV1NetToVcTable | 1.3.6.1.4.1.1080.1.1.4.4 | not-accessible | A list of PortCard ATM IP address to virtual channel entries. | |
| INT grAtmV1NetToVcVci | 1.3.6.1.4.1.1080.1.1.4.4.1.4 | INTEGER | read-write | The Virtual Channel Identifier (VCI) of this virtual channel. |
| INT grAtmV1NetToVcVpi | 1.3.6.1.4.1.1080.1.1.4.4.1.3 | INTEGER | read-write | The Virtual Path Identifier (VCI) of this virtual channel. |
| grAtmV1RateqEntry | 1.3.6.1.4.1.1080.1.1.4.3.1 | not-accessible | A grAtmV1Rateq entry containing attributes of an ATM interface. | |
| INT grAtmV1RateqIfIndex | 1.3.6.1.4.1.1080.1.1.4.3.1.1 | INTEGER | read-write | The interface on which this entry's rate queue exists. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| INT grAtmV1RateqIndex | 1.3.6.1.4.1.1080.1.1.4.3.1.2 | INTEGER | read-write | A number identifying the rate queue within the Interface. |
| INT grAtmV1RateqRate | 1.3.6.1.4.1.1080.1.1.4.3.1.3 | INTEGER | read-write | The maximum data rate allocated to this rate queue, in decimal thousands of bits per second. |
| INT grAtmV1RateqState | 1.3.6.1.4.1.1080.1.1.4.3.1.4 | INTEGER | read-write | The operational state of the rate queue. |
| grAtmV1RateqTable | 1.3.6.1.4.1.1080.1.1.4.3 | not-accessible | A list of PortCard ATM Interface entries. | |
| INT grAtmV1VcAal | 1.3.6.1.4.1.1080.1.1.4.1.1.4 | INTEGER | read-write | The ATM Adaptation Layer (AAL) protocol to be used on this virtual connection. |
| INT grAtmV1VcDestIfIndex | 1.3.6.1.4.1.1080.1.1.4.1.1.6 | INTEGER | read-write | The IfIndex value for the interface to which this virtual connection is attached, if any. This object is meaningful only when the grAtmV1VcProtocol value is diag0(4), diag1(5) or raw(6). |
| INT grAtmV1VcDestVci | 1.3.6.1.4.1.1080.1.1.4.1.1.8 | INTEGER | read-write | The VCI value for the Destination virtual connection to which this VC is attached, if any. This object is meaningful only when the grAtmV1VcProtocol value is diag0(4), diag1(5) or raw(6). |
| INT grAtmV1VcDestVpi | 1.3.6.1.4.1.1080.1.1.4.1.1.7 | INTEGER | read-write | The VPI value for the Destination virtual connection to which this VC is attached, if any. This object is meaningful only when the grAtmV1VcProtocol value is diag0(4), diag1(5) or raw(6). |
| grAtmV1VcEntry | 1.3.6.1.4.1.1080.1.1.4.1.1 | not-accessible | A grAtmV1Vc entry containing attributes of an ATM virtual connection. | |
| INT grAtmV1VcIfIndex | 1.3.6.1.4.1.1080.1.1.4.1.1.1 | INTEGER | read-write | The interface on which this entry's PVC exists. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| INT grAtmV1VcProtocol | 1.3.6.1.4.1.1080.1.1.4.1.1.5 | INTEGER | read-write | The upper-layer protocol to be used on this virtual connection. |
| INT grAtmV1VcRateq | 1.3.6.1.4.1.1080.1.1.4.1.1.9 | INTEGER | read-write | The number of the rate queue to which this virtual connection is assigned. |
| grAtmV1VcTable | 1.3.6.1.4.1.1080.1.1.4.1 | not-accessible | A list of PortCard ATM Interface entries. | |
| INT grAtmV1VcType | 1.3.6.1.4.1.1080.1.1.4.1.1.10 | INTEGER | read-write | The type of virtual connection. |
| INT grAtmV1VcVci | 1.3.6.1.4.1.1080.1.1.4.1.1.3 | INTEGER | read-write | The Virtual Connection Identifier (VCI) value of this virtual connection. |
| INT grAtmV1VcVpi | 1.3.6.1.4.1.1080.1.1.4.1.1.2 | INTEGER | read-write | The Virtual Path Identifier (VPI) value of this virtual connection. |
| INT grBackup | 1.3.6.1.4.1.1080.1.1.1.14 | INTEGER | read-write | The setting of this to yes starts the configuration Backup operation. |
| NTF grBackupRestoreMessages | 1.3.6.1.4.1.1080.1.1.0.53 | This trap is issued after a Backup/Compare/Restore operation has completed. | ||
| NTF grCardDown | 1.3.6.1.4.1.1080.1.1.0.4 | The trap that is issued when the Port Card's state changes from running(7) to any other state. | ||
| NTF grCardUp | 1.3.6.1.4.1.1080.1.1.0.5 | The trap that is issued when the Port Card's state changes to running(7) to any other state. | ||
| grChassis | 1.3.6.1.4.1.1080.1.1.1 | |||
| INT grCompare | 1.3.6.1.4.1.1080.1.1.1.15 | INTEGER | read-write | The setting of this to yes starts the configuration Compare operation. |
| grf | 1.3.6.1.4.1.1080.1.4 | |||
| grf1600 | 1.3.6.1.4.1.1080.1.4.2 | |||
| grf400 | 1.3.6.1.4.1.1080.1.4.1 | |||
| NTF grFanFailure | 1.3.6.1.4.1.1080.1.1.0.3 | The trap that is issued when any fan's speed falls below the minimum threshold value or the fan tray is removed from the system. | ||
| INT grFanStatus | 1.3.6.1.4.1.1080.1.1.1.3 | INTEGER | read-only | A sum of bits: 1 = Fan tray installed 2 = Fan 1 operational 4 = Fan 2 operational 8 = Fan 3 operational 16 = Fan 4 operational 32 = Fan 5 operational 64 = Fan 6 operational The expected value is based upon the actual number of fans installed and varies from chassis to chassis as shown below: GR-2 = 127 (six fans) GRF400 = 15 (three fans) GRF1600 = 7 (two fans) A value of zero indicates that the fan tray has been removed. |
| grFDDI4 | 1.3.6.1.4.1.1080.1.1.3 | |||
| STR grFileName | 1.3.6.1.4.1.1080.1.1.1.11 | DisplayString | read-write | This defines the file name to be used for a Backup/Compare/Restore operation. |
| STR grFTPPassword | 1.3.6.1.4.1.1080.1.1.1.9 | DisplayString | read-write | This defines the password for the ftp user. This password will be used to log into the ftp server to transfer the configuration files. |
| STR grFTPUserName | 1.3.6.1.4.1.1080.1.1.1.8 | DisplayString | read-write | This defines the user login name. This user login name will be used to log into the ftp server to transfer the configuration files. |
| NTF grGatedDown | 1.3.6.1.4.1.1080.1.1.0.35 | The trap issued when the threshold poller detects that gated is not running. | ||
| INT grGatedStatus | 1.3.6.1.4.1.1080.1.1.1.6 | INTEGER | read-only | The instantaneous state of gated: running or not running. |
| grHIPPI | 1.3.6.1.4.1.1080.1.1.2 | |||
| NTF grIfHCInBroadcastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.43 | The trap issued when ifHCInBroadcastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfHCInBroadcastPktsLow | 1.3.6.1.4.1.1080.1.1.0.44 | The trap issued when ifHCInBroadcastPkts is less than the configured threshold for that interface. | ||
| NTF grIfHCInMulticastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.41 | The trap issued when ifHCInMulticastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfHCInMulticastPktsLow | 1.3.6.1.4.1.1080.1.1.0.42 | The trap issued when ifHCInMulticastPkts is less than the configured threshold for that interface. | ||
| NTF grIfHCInOctetsHigh | 1.3.6.1.4.1.1080.1.1.0.37 | The trap issued when ifHCInOctets is greater than the configured threshold for that interface. | ||
| NTF grIfHCInOctetsLow | 1.3.6.1.4.1.1080.1.1.0.38 | The trap issued when ifHCInOctets is less than the configured threshold for that interface. | ||
| NTF grIfHCInUcastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.39 | The trap issued when ifHCInUcastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfHCInUcastPktsLow | 1.3.6.1.4.1.1080.1.1.0.40 | The trap issued when ifHCInUcastPkts is less than the configured threshold for that interface. | ||
| NTF grIfHCOutBroadcastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.51 | The trap issued when ifHCOutBroadcastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfHCOutBroadcastPktsLow | 1.3.6.1.4.1.1080.1.1.0.52 | The trap issued when ifHCOutBroadcastPkts is less than the configured threshold for that interface. | ||
| NTF grIfHCOutMulticastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.49 | The trap issued when ifHCOutMulticastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfHCOutMulticastPktsLow | 1.3.6.1.4.1.1080.1.1.0.50 | The trap issued when ifHCOutMulticastPkts is less than the configured threshold for that interface. | ||
| NTF grIfHCOutOctetsHigh | 1.3.6.1.4.1.1080.1.1.0.45 | The trap issued when ifHCOutOctets is greater than the configured threshold for that interface. | ||
| NTF grIfHCOutOctetsLow | 1.3.6.1.4.1.1080.1.1.0.46 | The trap issued when ifHCOutOctets is less than the configured threshold for that interface. | ||
| NTF grIfHCOutUcastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.47 | The trap issued when ifHCOutUcastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfHCOutUcastPktsLow | 1.3.6.1.4.1.1080.1.1.0.48 | The trap issued when ifHCOutUcastPkts is less than the configured threshold for that interface. | ||
| NTF grIfInDiscardsHigh | 1.3.6.1.4.1.1080.1.1.0.31 | The trap issued when ifInDiscards is greater than the configured threshold for that interface. | ||
| NTF grIfInDiscardsLow | 1.3.6.1.4.1.1080.1.1.0.32 | The trap issued when ifInDiscards is less than the configured threshold for that interface. | ||
| NTF grIfInErrorsHigh | 1.3.6.1.4.1.1080.1.1.0.27 | The trap issued when ifInErrors is greater than the configured threshold for that interface. | ||
| NTF grIfInErrorsLow | 1.3.6.1.4.1.1080.1.1.0.28 | The trap issued when ifInErrors is less than the configured threshold for that interface. | ||
| NTF grIfInOctetsHigh | 1.3.6.1.4.1.1080.1.1.0.19 | The trap issued when ifInOctets is greater than the configured threshold for that interface. | ||
| NTF grIfInOctetsLow | 1.3.6.1.4.1.1080.1.1.0.20 | The trap issued when ifInOctets is less than the configured threshold for that interface. | ||
| NTF grIfInUcastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.23 | The trap issued when ifInUcastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfInUcastPktsLow | 1.3.6.1.4.1.1080.1.1.0.24 | The trap issued when ifInUcastPkts is less than the configured threshold for that interface. | ||
| NTF grIfOutDiscardsHigh | 1.3.6.1.4.1.1080.1.1.0.33 | The trap issued when ifOutDiscards is greater than the configured threshold for that interface. | ||
| NTF grIfOutDiscardsLow | 1.3.6.1.4.1.1080.1.1.0.34 | The trap issued when ifOutDiscards is less than the configured threshold for that interface. | ||
| NTF grIfOutErrorsHigh | 1.3.6.1.4.1.1080.1.1.0.29 | The trap issued when ifOutErrors is greater than the configured threshold for that interface. | ||
| NTF grIfOutErrorsLow | 1.3.6.1.4.1.1080.1.1.0.30 | The trap issued when ifOutErrors is less than the configured threshold for that interface. | ||
| NTF grIfOutOctetsHigh | 1.3.6.1.4.1.1080.1.1.0.21 | The trap issued when ifOutOctets is greater than the configured threshold for that interface. | ||
| NTF grIfOutOctetsLow | 1.3.6.1.4.1.1080.1.1.0.22 | The trap issued when ifOutOctets is less than the configured threshold for that interface. | ||
| NTF grIfOutUcastPktsHigh | 1.3.6.1.4.1.1080.1.1.0.25 | The trap issued when ifOutUcastPkts is greater than the configured threshold for that interface. | ||
| NTF grIfOutUcastPktsLow | 1.3.6.1.4.1.1080.1.1.0.26 | The trap issued when ifOutUcastPkts is less than the configured threshold for that interface. | ||
| NTF grInterfaceDown | 1.3.6.1.4.1.1080.1.1.0.18 | The trap issued when an interface is not responding to pings. | ||
| STR grLastOperation | 1.3.6.1.4.1.1080.1.1.1.12 | DisplayString | read-only | This describes the last Backup/Compare/Restore operation that was executed on the system. |
| NTF grOverTemp | 1.3.6.1.4.1.1080.1.1.0.2 | The trap that is issued when the system temperature exceeds the maximum temperature threshold. | ||
| grPingLog | 1.3.6.1.4.1.1080.1.1.7 | |||
| grPingLogEntry | 1.3.6.1.4.1.1080.1.1.7.1.1 | not-accessible | A grThreshpoll entry containing current and previous threshold counters. | |
| grPingLogTable | 1.3.6.1.4.1.1080.1.1.7.1 | not-accessible | A list of current and previous threshpoll counter entries. | |
| STR grPLDevDownMsg | 1.3.6.1.4.1.1080.1.1.7.1.1.1 | DisplayString | read-only | The message sent when pinglog detects a device down. |
| INT grPortCardCurrentState | 1.3.6.1.4.1.1080.1.1.1.5.1.3 | INTEGER | read-only | The instantaneous state of port card operation. |
| grPortCardEntry | 1.3.6.1.4.1.1080.1.1.1.5.1 | not-accessible | A PortCard entry containing information common to a given port card. | |
| INT grPortCardHWtype | 1.3.6.1.4.1.1080.1.1.1.5.1.2 | INTEGER | read-only | GigaRouter Port Card hardware type. |
| INT grPortCardNumber | 1.3.6.1.4.1.1080.1.1.1.4 | INTEGER | read-only | The number of portcards installed in the system. |
| INT grPortCardSlot | 1.3.6.1.4.1.1080.1.1.1.5.1.1 | INTEGER | read-only | The port card slot number, starting at zero. |
| grPortCardTable | 1.3.6.1.4.1.1080.1.1.1.5 | not-accessible | A list of PortCard entries. The number of entries shall not exceed the value of grPortCardNumber. | |
| NTF grPowerSupplyFailure | 1.3.6.1.4.1.1080.1.1.0.1 | The trap that is issued when one of the power supplies is removed from the system or fails in in some way. | ||
| INT grPowerSupplyStatus | 1.3.6.1.4.1.1080.1.1.1.1 | INTEGER | read-only | A sum of bits: 1 = Power supply A is operational 2 = Power supply B is operational 3 = Power supplies A and B are operational |
| INT grRestore | 1.3.6.1.4.1.1080.1.1.1.16 | INTEGER | read-write | The setting of this to yes starts the configuration Restore operation. |
| STR grServerName | 1.3.6.1.4.1.1080.1.1.1.10 | DisplayString | read-write | This defines the ftp/tftp server name to be used for a Backup/Compare/Restore operation. |
| NTF grSnmpReset | 1.3.6.1.4.1.1080.1.1.0.36 | The trap issued when threshpoll detects that the snmp agent has restarted. | ||
| NTF grSONETLineAlarmIndicationSignal | 1.3.6.1.4.1.1080.1.1.0.10 | The trap issued when the SONET receive hardware detects a Line Alarm Indication Signal (L-AIS). | ||
| NTF grSONETLineRemoteDefectIndication | 1.3.6.1.4.1.1080.1.1.0.13 | The trap issued when the SONET receive hardware detects a Line Remote Defect Indication (RDI, also known as Line FERF). | ||
| NTF grSONETLossOfFrame | 1.3.6.1.4.1.1080.1.1.0.6 | The trap issued when the SONET receive hardware detects a Loss Of Frame Failure (LOF). | ||
| NTF grSONETLossOfSignal | 1.3.6.1.4.1.1080.1.1.0.7 | The trap issued when the SONET receive hardware detects Loss of Signal (LOS). | ||
| NTF grSONETSTSPathAlarmIndicationSignal | 1.3.6.1.4.1.1080.1.1.0.11 | The trap issued when the SONET receive hardware detects an STS-Path Alarm Indication Signal (AIS). | ||
| NTF grSONETSTSPathLossOfPointer | 1.3.6.1.4.1.1080.1.1.0.8 | The trap issued when the SONET receive hardware detects STS-Path Lossof Pointer (LOP). | ||
| NTF grSONETTCLossOfCellDelineation | 1.3.6.1.4.1.1080.1.1.0.15 | The trap issued when the SONET receive hardware detects Loss of Cell Delineation. | ||
| NTF grSONETVTLossOfPointer | 1.3.6.1.4.1.1080.1.1.0.9 | The trap issued when the SONET receive hardware detects VT Loss of Pointer (VT LOP). | ||
| NTF grSONETVTPathAlarmIndicationSignal | 1.3.6.1.4.1.1080.1.1.0.12 | The trap issued when the SONET receive hardware detects a VT-Path Alarm Indication Signal (VT-Path AIS). | ||
| NTF grSONETVTPathRemoteDefectIndication | 1.3.6.1.4.1.1080.1.1.0.14 | The trap issued when the SONET receive hardware detects a VT-Path Remote Defect Indication (VT Path RDI, also known as VT Path FERF). | ||
| STR grStatusMsg | 1.3.6.1.4.1.1080.1.1.1.13 | DisplayString | read-only | This message contains the status information associated with the last Backup/Compare/Restore operation. |
| INT grTempStatus | 1.3.6.1.4.1.1080.1.1.1.2 | INTEGER | read-only | The temperature sensed by the Routing Manager Board. Over-temp status means that the temperature has exceeded the maximum temperature threshold. |
| grThreshPoll | 1.3.6.1.4.1.1080.1.1.6 | |||
| grThreshPollEntry | 1.3.6.1.4.1.1080.1.1.6.3.1 | not-accessible | A grThreshpoll entry containing current and previous threshold counters. | |
| grThreshPollTable | 1.3.6.1.4.1.1080.1.1.6.3 | not-accessible | A list of current and previous threshpoll counter entries. | |
| CTR grTPCurrentCount | 1.3.6.1.4.1.1080.1.1.6.3.1.1 | Counter | read-only | The current value of a counter being polled by the threshold poller. |
| CTR grTPCurrentCountUpper | 1.3.6.1.4.1.1080.1.1.6.3.1.3 | Counter | read-only | The upper 32 bits of the current value of a 64 bit counter being polled by the threshold poller. |
| CTR grTPPreviousCount | 1.3.6.1.4.1.1080.1.1.6.3.1.2 | Counter | read-only | The previous value of a counter being polled by the threshold poller. |
| CTR grTPPreviousCountUpper | 1.3.6.1.4.1.1080.1.1.6.3.1.4 | Counter | read-only | The upper 32 bits of the previous value of a 64 bit counter being polled by the threshold poller. |
| INT grTransportMethod | 1.3.6.1.4.1.1080.1.1.1.7 | INTEGER | read-write | This defines the transport method used to transfer configuration files between the GRF and a ftp/tftp server |
| NTF linkDown | 1.3.6.1.2.1.11.0.2 | A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration. | ||
| NTF linkUp | 1.3.6.1.2.1.11.0.3 | A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up. | ||
| mib2Daemon | 1.3.6.1.4.1.1080.2.1 | |||
| mibmgrDaemon | 1.3.6.1.4.1.1080.2.4 | |||
| netstar | 1.3.6.1.4.1.1080 | |||
| netstar_daemons | 1.3.6.1.4.1.1080.2 | |||
| netstar_products | 1.3.6.1.4.1.1080.1 | |||
| NTF warmStart | 1.3.6.1.2.1.11.0.1 | A warmStart trap signifies that the sending protocol entity is reinitializing itself such that neither the agent configuration nor the protocol entity implementation is altered. |
RFC description
NetStar proprietary MIB for high-speed IP routers and switches supporting HIPPI, FDDI, ATM/SONET, and Ethernet media.
Start monitoring NetStar Gigarouter / ClusterSwitch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.