All MIBs › NETI-CHMGR-MIB › chmgrODescrOneHopSpareCapUtilization
chmgrODescrOneHopSpareCapUtilization
Module: NETI-CHMGR-MIB
OID (symbolic): NETI-CHMGR-MIB::chmgrODescrOneHopSpareCapUtilization
OID (numeric): 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Specifies if the the channel shall dynamically allocate spare capacity.
When `true', then the channel is initially established with the acceptable capacity specified in chmgrODescrAcceptableBps (or chmgrODescrAcceptableMbps). The channel capacity is then monitored and automatically increased with available capacity up to the capacity specified in chmgrODescrRequestedBps (or chmgrODescrRequestedMbps). If another channel would request capacity, then the capacity of this channel is reduced as needed by the other channel, but not below the acceptable capacity.
When set to `false', then spare capacity will not be used.
This function requires use of DCP3, see chmgrODescrRequestedDcpVersion.
This function requires use of ETS unicast.
This function requires the channel destination to be a neighboring node.
What is chmgrODescrOneHopSpareCapUtilization?
Enables dynamic use of otherwise-idle link capacity for this connection's channel: when true, the channel starts at its acceptable capacity and is automatically grown toward the requested capacity as spare bandwidth becomes available, shrinking again if another channel needs that capacity. Requires DCP3 and a unicast Ethernet Transport Service channel to a directly neighboring node.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20 snmpwalk -v2c -c public <target> NETI-CHMGR-MIB::chmgrODescrOneHopSpareCapUtilization
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20.1 snmpget -v2c -c public <target> NETI-CHMGR-MIB::chmgrODescrOneHopSpareCapUtilization.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20.1 s <value>
Start monitoring Net Insight media transport chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETI-CHMGR-MIB::chmgrODescrOneHopSpareCapUtilization OID value, configure state conditions and alerts, and monitor any Net Insight media transport chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2928 | netinsight | NETI-COMMON-MIB |
| 1.3.6.1.4.1.2928.6 | netiExperimental | NETI-COMMON-MIB |
| 1.3.6.1.4.1.2928.6.2 | netiExperimentalGeneric | NETI-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2928.6.2.14 | netiChmgrMIB | NETI-CHMGR-MIB |
| 1.3.6.1.4.1.2928.6.2.14.1 | chmgrObjects | NETI-CHMGR-MIB |
| 1.3.6.1.4.1.2928.6.2.14.1.1 | chmgrODescriptionGroup | NETI-CHMGR-MIB |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2 | chmgrODescriptionTable | NETI-CHMGR-MIB |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1 | chmgrODescriptionEntry | NETI-CHMGR-MIB |
| 1.3.6.1.4.1.2928.6.2.14.1.1.2.1.20 | chmgrODescrOneHopSpareCapUtilization | NETI-CHMGR-MIB |