MPSLA

All MIBs › MPSLA

Organization: Maipu Communication Technology Co. LTD.

Last Updated: 2008-09-17

Category: OAM

Description: Manages Maipu Communication IP SLA probe configuration and performance results.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MPSLA?

This is a Maipu Communication enterprise MIB that configures and reports IP SLA (Service Level Agreement) probe entities on Maipu routers/switches, similar in spirit to vendor RTT/IP-SLA MIBs. It exposes SLA controller and responder objects, a table of configured SLA "entities" (probes) with an ID, name, and type, plus trap objects describing SLA-related fault classes. Monitoring this MIB centers on active performance/software probing, checking whether SLA test entities are enabled, tracking probe type and status, and receiving traps when a probe detects a service-level violation, useful for tracking network path performance rather than physical hardware component health. The module description is minimal, and sample objects reference an "mpios"/"iosSystem" tree suggesting dependency on the vendor's broader Maipu OS system MIB. Typical deployment is on Maipu routers/switches used by ISPs or enterprises running MPSLA SNMP monitoring to track active latency/jitter/loss probes between network endpoints.

IPNetwork Monitor allows you to monitor SNMP objects defined in MPSLA. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Maipu Communication router/switch

Monitoring Examples

An operator would enable sysSlaCtrl and check sysSlaResponder status, then walk sysSlaEntityTable/sysSlaEntityEntry, indexed by slaEntityId, to see each probe's slaEntityName and slaEntityType. When an SLA threshold is breached, an mpTrapClass/mpTrapType notification carrying mpTrapDescr is generated, letting an admin correlate a specific probe entity to a network performance degradation event. sysSlaNotUsedEntityId/sysSlaNotUsedScheId appear to track unused entity and schedule ID slots available for provisioning new probes.

What Can Be Monitored

SLA probe status (enabled/disabled)
SLA entity name and type
SLA responder status
SLA violation traps
available entity/schedule IDs

Imported Objects

From MAIPU-SMI

mpMgmt	OBJECT-IDENTITY
mpTrapObject	OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
mpTrap	1.3.6.1.4.1.5651.2.1			Private trap properties.
INT mpTrapClass	1.3.6.1.4.1.5651.2.1.1	INTEGER	read-only	The class of the Traps.
STR mpTrapDescr	1.3.6.1.4.1.5651.2.1.2	DisplayString	read-only	Describe the reason of the trap.
INT mpTrapType	1.3.6.1.4.1.5651.2.1.3	INTEGER	read-only	The type of each trap,show the category.
mpTraps	1.3.6.1.4.1.5651.2.2			All the successor object identifiers of maipu.traps are the same as those of maipu.products, which represent the source device type of traps. When maipu Agent send out traps, it should set the 'enterprise' field to an OID which indicates the device type, so that when a NMS receive the trap, it could lookup such field to identify different device. For example: 'Specific' = 1 in a trap package may represent different meaning in different kinds of device, if 'enterprise' = 1.3.6.1.4.1.5651.2.6.1, then NMS could know that it is sent from a MP9400, so the trap means 'Modem card power-on'.
mpSla	1.3.6.1.4.1.5651.2.2.62			Subtree for SLA.
NTF mpSlaTrap	1.3.6.1.4.1.5651.2.2.62.1			This notification is generated when network trafic is not so good.
mpios	1.3.6.1.4.1.5651.3.20
iosSystem	1.3.6.1.4.1.5651.3.20.1
iosObjects	1.3.6.1.4.1.5651.3.20.1.1
sysSLA	1.3.6.1.4.1.5651.3.20.1.1.201			Node for System SLA subtree.
sysSlaGbl	1.3.6.1.4.1.5651.3.20.1.1.201.1
ENA sysSlaCtrl	1.3.6.1.4.1.5651.3.20.1.1.201.1.1	EnabledStatus	read-write	RTR global switch enable(2)-enable RTR module disable(2)-no RTR module
T/F sysSlaResponder	1.3.6.1.4.1.5651.3.20.1.1.201.1.2	TruthValue	read-write	Rtr Responder TRUE(1)-Rtr Responder False(2)-no Rtr Responder on valid in jitter entity now
INT sysSlaNotUsedEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.1.3	INTEGER	read-only	The entity id that not in use
INT sysSlaNotUsedScheId	1.3.6.1.4.1.5651.3.20.1.1.201.1.4	INTEGER	read-only	The schedule id that not in use
sysSlaEntityMgt	1.3.6.1.4.1.5651.3.20.1.1.201.2
sysSlaEntityTable	1.3.6.1.4.1.5651.3.20.1.1.201.2.100		not-accessible	Rtr entity table,config or view information about Rtr entity
sysSlaEntityEntry	1.3.6.1.4.1.5651.3.20.1.1.201.2.100.1		not-accessible	Rtr entity,config or view information about Rtr entity
INT slaEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.2.100.1.1	INTEGER	read-write	Rtr entity Id,index
STR slaEntityName	1.3.6.1.4.1.5651.3.20.1.1.201.2.100.1.2	DisplayString	read-only	rtr entity name,araised aumatically,read-only
INT slaEntityType	1.3.6.1.4.1.5651.3.20.1.1.201.2.100.1.3	INTEGER	read-write	rtr entity,inlcuding icmpEcho,jitter,flow statistics,udpecho,icmp path echo,icmp path jitter
ROW slaEntityRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.2.100.1.4	RowStatus	read-write	rtr entity row status
sysSlaGroupMgt	1.3.6.1.4.1.5651.3.20.1.1.201.3
sysSlaGroupTable	1.3.6.1.4.1.5651.3.20.1.1.201.3.100		not-accessible	Rtr group table
sysSlaGroupEntry	1.3.6.1.4.1.5651.3.20.1.1.201.3.100.1		not-accessible	Rtr group entity
INT slaGroupId	1.3.6.1.4.1.5651.3.20.1.1.201.3.100.1.1	INTEGER	read-write	rtr group id,index
STR slaGroupName	1.3.6.1.4.1.5651.3.20.1.1.201.3.100.1.2	DisplayString	read-only	rtr group name,araised aumatically, read-only
INT slaGroupInterval	1.3.6.1.4.1.5651.3.20.1.1.201.3.100.1.3	INTEGER	read-write	rtr group interval, seconds
STR slaGroupEntityMembers	1.3.6.1.4.1.5651.3.20.1.1.201.3.100.1.4	DisplayString	read-write	RTR group members��string type�� 1��3��10-20��50 string length no more than 255, separated by comma,no space in the string��
ROW slaGroupRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.3.100.1.5	RowStatus	read-write	rtr group table row status
sysSlaScheduleMgt	1.3.6.1.4.1.5651.3.20.1.1.201.4
sysSlaScheduleTable	1.3.6.1.4.1.5651.3.20.1.1.201.4.100		not-accessible	rtr schedule table
sysSlaScheduleEntry	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1		not-accessible	rtr schedule table entry
U32 slaScheduleId	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.1	Unsigned32	read-write	rtr schedule Id,index
INT slaScheduleType	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.2	INTEGER	read-write	rtr schedule type
INT slaScheduleObjId	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.3	INTEGER	read-write	id of rtrschedule object which means rtr group or entity.
INT slaScheduleStartTimeFlag	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.4	INTEGER	read-write	RTR schedule start time. startNow; afterTime; startTime-start at the given time
STR slaScheduleAfterTime	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.5	DisplayString	read-write	RTR schedule given time. type string�� HH:MM:SS valid when sysRtrScheduleFlag is afterTime.
STR slaScheduleStartTime	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.6	DisplayString	read-write	RTR schedule given time. type string�� HH:MM:SS,mm,dd,yyyy valid when sysRtrScheduleFlag is startTime.
U32 slaScheduleAgeOut	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.7	Unsigned32	read-write	rtr schedule ageout time in second.
INT slaScheduleLifeFlag	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.8	INTEGER	read-write	rtr schedule's life forever,if config, no need to config lifetime and repeat times repeatAndDie,if config, need to config lifetime and repeat times
U32 slaScheduleLifeTime	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.9	Unsigned32	read-write	rtr schedule's lieftime in second, valid only when rtrScheduleLifeFlag is repeatAndDie.
U32 slaScheduleRepeat	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.10	Unsigned32	read-write	rtr schedule's repeat times, valid only when rtrScheduleLifeFlag is repeatAndDie.
U32 slaScheduleInterval	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.11	Unsigned32	read-only	rtr schedule interval in second
ROW slaScheduleRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.4.100.1.12	RowStatus	read-write	rtr schedule row status
sysSlaIcmpEchoMgt	1.3.6.1.4.1.5651.3.20.1.1.201.5
sysSlaIcmpEchoTable	1.3.6.1.4.1.5651.3.20.1.1.201.5.100		not-accessible	RTR ICMP entity table
sysSlaIcmpEchoEntry	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1		not-accessible	RTR ICMP entity entry
INT slaIcmpEchoTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.1	INTEGER	read-write	ICMP entity ID,index
IP slaIcmpEchoTargetIp	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.2	IpAddress	read-write	ICMPECHO(ping) destination address
U32 slaIcmpEchoPktNum	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.3	Unsigned32	read-write	ICMP PING send packets number,default 1. pkt-num * timeout must be less than schedule interval
INT slaIcmpEchoPktLen	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.4	INTEGER	read-write	ICMP PING send packets size,default 70.
INT slaIcmpEchoTimeout	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.5	INTEGER	read-write	ICMP ping reply timeout in seconds,default 2 seconds. pkt-num * timeout must be less than schedule interval
U32 slaIcmpEchoSchInterval	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.6	Unsigned32	read-write	IcmpEcho interval in seconds,default 12 seconds. schedule interval must be larger than timout * pkt-num
T/F slaIcmpEchoExtendFlag	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.7	TruthValue	read-write	ICMP extern ping flag, have set Tos,verify data,DF,sourceIp and vrf or yet.
STR slaIcmpEchoVrfName	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.8	DisplayString	read-write	vrfname type string, valid only rtrIcmpEchoExtendFlag is TRUE,default global.
IP slaIcmpEchoSourceIp	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.9	IpAddress	read-write	ICMP source IP address, valid only rtrIcmpEchoExtendFlag is TRUE.
INT slaIcmpEchoTos	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.10	INTEGER	read-write	ICMP TOS value, valid only rtrIcmpEchoExtendFlag is TRUE,default 0.
T/F slaIcmpEchoSetDf	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.11	TruthValue	read-write	ICMP pakcet DF bit, valid only rtrIcmpEchoExtendFlag is TRUE,default TRUE.
T/F slaIcmpEchoVerifyData	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.12	TruthValue	read-write	ICMP verifay data flag, valid only rtrIcmpEchoExtendFlag is TRUE,default FALSE.
INT slaIcmpEchoHistorySize	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.13	INTEGER	read-write	ICMPECHO entity 's history size,default 1.
INT slaIcmpEchoPeriods	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.14	INTEGER	read-write	periods,default 1.
INT slaIcmpEchoAlarmType	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.15	INTEGER	read-write	RTR entity alarm type�� log��log message trap��snmp trap logAndTrap-log message and snmp trap noLogAndtrap-no log message and no snmp trap,default.
T/F slaIcmpEchoIsScheduling	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.16	TruthValue	read-write	TRUE(1)-in scheduling FALSE(2)-not in scheduling
ROW slaIcmpEchoRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.5.100.1.17	RowStatus	read-write	ICMP row status
sysSlaIcmpEchoHistoryTable	1.3.6.1.4.1.5651.3.20.1.1.201.5.200		not-accessible	RTR ICMP entity history table
sysSlaIcmpEchoHistoryEntry	1.3.6.1.4.1.5651.3.20.1.1.201.5.200.1		not-accessible	RTR ICMP entity entry
INT slaIcmpEchoHisTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.5.200.1.1	INTEGER	read-write	ICMP entity id,index
INT slaIcmpEchoHistoryIndex	1.3.6.1.4.1.5651.3.20.1.1.201.5.200.1.2	INTEGER	read-write	ICMP entity history index
INT slaIcmpEchoRtt	1.3.6.1.4.1.5651.3.20.1.1.201.5.200.1.3	INTEGER	read-write	ICMP entity rtt
INT slaIcmpEchoPktLoss	1.3.6.1.4.1.5651.3.20.1.1.201.5.200.1.4	INTEGER	read-write	ICMP entity pkt loss
STR slaIcmpEchoTime	1.3.6.1.4.1.5651.3.20.1.1.201.5.200.1.5	DisplayString	read-write	recorded time
ROW slaIcmpEchoTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.5.200.1.6	RowStatus	read-write	ICMP row status
sysSlaJitterMgt	1.3.6.1.4.1.5651.3.20.1.1.201.6
sysSlaJitterTable	1.3.6.1.4.1.5651.3.20.1.1.201.6.100		not-accessible	RTR JITTER entity table
sysSlaJitterEntry	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1		not-accessible	RTR JITTER entity entry
INT slaJitterTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.1	INTEGER	read-write	JITTER entity id,index
INT slaJitterState	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.2	INTEGER	read-only	JITTE entity��1��init��2��pend, 3��send request��4-send packets�� 5-halt, 6��finish
IP slaJitterTargetIp	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.3	IpAddress	read-write	JITTER responder destination ip address
INT slaJitterTargetPort	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.4	INTEGER	read-write	JITTER responder destination port
INT slaJitterCodec	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.5	INTEGER	read-write	JITTER codec type,including: 1 G711MULAW,2 G711ALAW,3 G729A,4 USER_DEFINED 5 UNKOWN
INT slaJitterPktLen	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.6	INTEGER	read-write	JITTER codec packet length, read-writable when rtrJitterCodec is USER_DEFINED else read-only type:byte.
INT slaJitterPktNum	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.7	INTEGER	read-write	JITTER codec packet number, read-writable when rtrJitterCodec is USER_DEFINED else read-only. pkt-num * pkt-interval must be less than timeout
INT slaJitterPktInterval	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.8	INTEGER	read-write	JITTER codec packet send interval, read-writable when rtrJitterCodec is USER_DEFINED,default 20 ms. else read-only, type:ms. pkt-num * pkt-interval must be less than timeout
INT slaJitterSchInterval	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.9	INTEGER	read-write	Jitter schedule interval, read-writable when rtrJitterCodec is USER_DEFINED,default 6s. else read-only, type:s. schedule interval must be larger than timeout
IP slaJitterSourceIp	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.10	IpAddress	read-write	JITTER source IP address
INT slaJitterSourcePort	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.11	INTEGER	read-write	JITTER source port
INT slaJitterTimeout	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.12	INTEGER	read-write	JITTER timeout value,type:ms,default 5000, notice,schedule interval must be larger than timeout
STR slaJitterVrfName	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.13	DisplayString	read-write	JITTER vrf string,default global.
INT slaJitterTos	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.14	INTEGER	read-write	JITTER pakcet TOS value,default 0.
INT slaJitterHistorySize	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.15	INTEGER	read-write	JITTER entity's history size,default 1.
INT slaJitterPeriods	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.16	INTEGER	read-write	periods,default 1.
INT slaJitterAlarmType	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.17	INTEGER	read-write	RTR entity alarm type�� log(1)��log message trap(2)��snmp trap logAndTrap(3)-log message and snmp trap noLogAndtrap(4)-no log message and no snmp trap,default.
ROW slaJitterTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.6.100.1.18	RowStatus	read-write	JITTER row status
sysSlaJitterHistoryTable	1.3.6.1.4.1.5651.3.20.1.1.201.6.200		not-accessible	RTR JITTER history table
sysSlaJitterHistoryEntry	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1		not-accessible	RTR JITTER entity entry
INT slaJitterHisTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.1	INTEGER	read-write	JITTER entity id, index
INT slaJitterHistoryIndex	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.2	INTEGER	read-write	JITTER history index
INT slaJitterRtt	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.3	INTEGER	read-only	JITTER round-trip-time value in ms
INT slaJitterPktLossSd	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.4	INTEGER	read-only	JITTER total lossed pakcets which send by the source
INT slaJitterPktLossDs	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.5	INTEGER	read-only	JITTER total loss pakcets which send by the target
INT slaJitterSd	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.6	INTEGER	read-only	JITTER destination to source jitter in millisecond
INT slaJitterDs	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.7	INTEGER	read-only	JITTER source to destination jitter in millisecond
INT slaJitterDelaySd	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.8	INTEGER	read-only	JITTER maximal destination to source delay in millisecond
INT slaJitterDelayDs	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.9	INTEGER	read-only	JITTER maximal source to destination delay in millisecond
INT slaJitterIcpif	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.10	INTEGER	read-only	JITTER icpif
INT slaJitterMos	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.11	INTEGER	read-only	JITTER MOS
STR slaJitterTime	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.12	DisplayString	read-only	recorded time
ROW slaJitterHisTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.6.200.1.13	RowStatus	read-write	JITTER history row status
sysSlaUdpEchoMgt	1.3.6.1.4.1.5651.3.20.1.1.201.7
sysSlaUdpEchoTable	1.3.6.1.4.1.5651.3.20.1.1.201.7.100		not-accessible	RTR UDPECHO entity table
sysSlaUdpEchoEntry	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1		not-accessible	RTR UDPECHO entity entry
INT slaUdpEchoTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.1	INTEGER	read-write	UDPECHO entity id,index
INT slaUdpEchoState	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.2	INTEGER	read-only	UDPECHO entity��1��init��2��pend�� 3��send request��4-send packets��5-halt, 6��finish
IP slaUdpEchoTargetIp	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.3	IpAddress	read-write	UDPECHO responder destination ip address
U32 slaUdpEchoTargetPort	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.4	Unsigned32	read-write	UDPECHO responder destination port
INT slaUdpEchoPktLen	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.5	INTEGER	read-write	UDPECHO packet length,default 16.
U32 slaUdpEchoSchInterval	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.6	Unsigned32	read-write	UDPECHO schedule interval in milliseconds,default 6. type:s. schedule interval must be larger than timeout
IP slaUdpEchoSourceIp	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.7	IpAddress	read-write	UDPECHO source IP address
U32 slaUdpEchoSourcePort	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.8	Unsigned32	read-write	UDPECHO source port
U32 slaUdpEchoTimeout	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.9	Unsigned32	read-write	UDPECHO timeout value,type:ms,default 5000. schedule interval must be larger than timeout
STR slaUdpEchoVrfName	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.10	DisplayString	read-write	UDPECHO vrf string,default global.
INT slaUdpEchoTos	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.11	INTEGER	read-write	UDPECHO pakcet TOS value,default 0.
INT slaUdpEchoHistorySize	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.12	INTEGER	read-write	UDPECHO entity's history size,defualt 1.
INT slaUdpEchoPeriods	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.13	INTEGER	read-write	periods,default 1.
INT slaUdpEchoAlarmType	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.14	INTEGER	read-write	RTR entity alarm type, log��log message, trap��snmp trap, logAndTrap-log message and snmp trap, noLogAndtrap-no log message and no snmp trap,default.
ROW slaUdpEchoTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.7.100.1.15	RowStatus	read-write	UDPECHO row status
sysSlaUdpEchoHistoryTable	1.3.6.1.4.1.5651.3.20.1.1.201.7.200		not-accessible	RTR UDPECHO entity table
sysSlaUdpEchoHistoryEntry	1.3.6.1.4.1.5651.3.20.1.1.201.7.200.1		not-accessible	RTR UDPECHO entity entry
INT slaUdpEchoHisTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.7.200.1.1	INTEGER	read-write	UDPECHO entity id,idx
INT slaUdpEchoHistoryIndex	1.3.6.1.4.1.5651.3.20.1.1.201.7.200.1.2	INTEGER	read-write	UDPECHO history index
INT slaUdpEchoPktLoss	1.3.6.1.4.1.5651.3.20.1.1.201.7.200.1.3	INTEGER	read-only	UDPECHO total lossed pakcets which send by the source
INT slaUdpEchoRtt	1.3.6.1.4.1.5651.3.20.1.1.201.7.200.1.4	INTEGER	read-only	UDPECHO rtt in millisecond
STR slaUdpEchoTime	1.3.6.1.4.1.5651.3.20.1.1.201.7.200.1.5	DisplayString	read-only	UDPECHO rtt in millisecond
ROW slaUdpEchoHisTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.7.200.1.6	RowStatus	read-write	UDPECHO row status
sysSlaFlStaMgt	1.3.6.1.4.1.5651.3.20.1.1.201.8
sysSlaFlStaTable	1.3.6.1.4.1.5651.3.20.1.1.201.8.100		not-accessible	RTR flow statistics table
sysSlaFlStaEntry	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1		not-accessible	RTR flow statistics entry
INT slaFlStaTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1.1	INTEGER	read-write	flow statistics entity Id
STR slaFlStaIfName	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1.2	DisplayString	read-write	interface name which will be statistic
INT slaFlStaInterval	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1.3	INTEGER	read-write	monitor interval in second,default 600.
INT slaFlStaHistorySize	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1.4	INTEGER	read-write	flow statistics entity's history size,default 1.
INT slaFlStaPeriods	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1.5	INTEGER	read-write	periods,default 1.
INT slaFlStaAlarmType	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1.6	INTEGER	read-write	RTR entity alarm type�� log��log message trap��snmp trap logAndTrap-log message and snmp trap noLogAndtrap-no log message and no snmp trap,default
ROW slaFlStaTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.8.100.1.7	RowStatus	read-write	flow statistics row status
sysSlaFlStaHistoryTable	1.3.6.1.4.1.5651.3.20.1.1.201.8.200		not-accessible	RTR flow statistics table
sysSlaFlStaHistoryEntry	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1		not-accessible	RTR flow statistics entry
INT slaFlStaHisTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.1	INTEGER	read-write	flow statistics entity Id
INT slaFlStaHistoryIndex	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.2	INTEGER	read-only	Pakcets received once sampling period
INT slaFlStaInputPkts	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.3	INTEGER	read-only	Pakcets received once sampling period
INT slaFlStaInputFlow	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.4	INTEGER	read-only	maximal flow value received
INT slaFlStaOutputPkts	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.5	INTEGER	read-only	Pakcets send once sampling period
INT slaFlStaOutputFlow	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.6	INTEGER	read-only	maximal flow send
STR slaFlStaTime	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.7	DisplayString	read-only	maximal flow send
ROW slaFlStaHisTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.8.200.1.8	RowStatus	read-write	flow statistics row status
sysSlaIcmpPathJitMgt	1.3.6.1.4.1.5651.3.20.1.1.201.9
sysSlaIcmpPathJitTable	1.3.6.1.4.1.5651.3.20.1.1.201.9.100		not-accessible	RTR ICMP PATH JITTER entity table
sysSlaIcmpPathJitEntry	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1		not-accessible	RTR ICMP entity entry
INT slaIcmpPJTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.1	INTEGER	read-write	ICMP PATH JITTER entity ID,index
IP slaIcmpPJTargetIp	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.2	IpAddress	read-write	ICMP PATH JITTER(ping) destination address
U32 slaIcmpPJPktNum	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.3	Unsigned32	read-write	ICMP PATH JITTER PING send packets number,default 10. pkt-num * pkt-interval must be less than timeout
INT slaIcmpPJPktLen	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.4	INTEGER	read-write	ICMP PATH JITTER PING send packets size,default 32.
INT slaIcmpPJTimeout	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.5	INTEGER	read-write	ICMP ping reply timeout in miliseconds,default 5000. schedule interval must be larger than timeout
U32 slaIcmpPJPktInterval	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.6	Unsigned32	read-write	IcmpEcho packet interval in milliseconds,default 20. pkt-num * pkt-interval must be less than timeout
U32 slaIcmpPJSchInterval	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.7	Unsigned32	read-write	IcmpEcho interval in seconds,default 60. schedule interval must be larger than timeout
STR slaIcmpPJVrfName	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.8	DisplayString	read-write	vrfname string,default global.
IP slaIcmpPJSourceIp	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.9	IpAddress	read-write	ICMP PATH JITTER source IP address
INT slaIcmpPJTos	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.10	INTEGER	read-write	ICMP PATH JITTER TOS value,default 0.
T/F slaIcmpPJVerifyData	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.11	TruthValue	read-write	ICMP PATH JITTER verifay data flag true(1)-verifa data; false(2)-don't verify data,default.
INT slaIcmpPJAlarmType	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.12	INTEGER	read-write	RTR entity alarm type�� log��log message trap��snmp trap logAndTrap-log message and snmp trap noLogAndtrap-no log message and no snmp trap,default.
T/F slaIcmpPJTargetOnly	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.13	TruthValue	read-write	ICMP PATH JITTER target only or not. TRUE-target only,default; FALSE-hop by hop.
INT slaIcmpPJHistorySize	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.14	INTEGER	read-write	Max size of ICMP PATH JITTER entity's history,default 1.
INT slaIcmpPJPeriods	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.15	INTEGER	read-write	periods,default 1.
IP slaIcmpPJLsrPath	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.16	IpAddress	read-write	Lsr-path of ICMP PATH JITTER entity,default 0.0.0.0
T/F slaIcmpPJIsScheduling	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.17	TruthValue	read-only	Status of schedule of ICMP PATH JITTER entity TRUE(1)-in scheduling, FALSE(2)-not in scheduling
ROW slaIcmpPJTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.9.100.1.18	RowStatus	read-write	ICMP PATH JITTER row status
sysSlaIcmpPathJitHistoryTable	1.3.6.1.4.1.5651.3.20.1.1.201.9.200		not-accessible	RTR ICMP PATH JITTER entity history table
sysSlaIcmpPathJitHistoryEntry	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1		not-accessible	RTR ICMP entity entry
INT slaIcmpPJHisTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.1	INTEGER	read-write	ICMP PATH JITTER entity hop index
INT slaIcmpPJHopIndex	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.2	INTEGER	read-write	ICMP PATH JITTER entity hop index
INT slaIcmpPJHistoryIndex	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.3	INTEGER	read-write	ICMP PATH JITTER entity history index,now we only record the last message
INT slaIcmpPJRtt	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.4	INTEGER	read-only	ICMP entity rtt
INT slaIcmpPJJitter	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.5	INTEGER	read-only	ICMP entity jitter
INT slaIcmpPJPktLoss	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.6	INTEGER	read-only	ICMP entity packet loss
STR slaIcmpPJTime	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.7	DisplayString	read-only	recorded time
INT slaIcmpPJGetStatus	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.8	INTEGER	read-only	1:has get all hop history; 0:has not get all hop history
ROW slaIcmpPJHisTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.9.200.1.9	RowStatus	read-write	ICMP row status
sysSlaIcmpPathEchoMgt	1.3.6.1.4.1.5651.3.20.1.1.201.10
sysSlaIcmpPathEchoTable	1.3.6.1.4.1.5651.3.20.1.1.201.10.100		not-accessible	RTR ICMP PATH JITTER entity table
sysSlaIcmpPathEchoEntry	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1		not-accessible	RTR ICMP entity entry
INT slaIcmpPETableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.1	INTEGER	read-write	ICMP PATH ECHO entity ID,index
IP slaIcmpPETargetIp	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.2	IpAddress	read-write	ICMP PATH ECHO(ping) destination address
INT slaIcmpPEPktLen	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.3	INTEGER	read-write	ICMP PATH ECHO PING send packets size,default 32.
INT slaIcmpPETimeout	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.4	INTEGER	read-write	ICMP ping reply timeout in miliseconds,default 5000. schedule interval must be larger than timeout
U32 slaIcmpPESchInterval	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.5	Unsigned32	read-write	IcmpPathEcho interval in seconds,default 60. schedule interval must be larger than timeout
STR slaIcmpPEVrfName	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.6	DisplayString	read-write	vrfname string,default global.
IP slaIcmpPESourceIp	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.7	IpAddress	read-write	ICMP PATH ECHO source IP address
INT slaIcmpPETos	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.8	INTEGER	read-write	ICMP PATH ECHO TOS value,default 0.
T/F slaIcmpPEVerifyData	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.9	TruthValue	read-write	ICMP PATH JITTER verifay data flag true(1)-verify data; false(2)-don't verify data,default.
IP slaIcmpPELsrPath	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.10	IpAddress	read-write	ICMP PATH JITTER lsr-path,default 0.0.0.0
INT slaIcmpPEHistorySize	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.11	INTEGER	read-write	Max size of ICMP PATH ECHO entity 's history,default 1.
INT slaIcmpPEPeriods	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.12	INTEGER	read-write	periods,default 1.
INT slaIcmpPEAlarmType	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.13	INTEGER	read-write	RTR entity alarm type�� log��log message trap��snmp trap logAndTrap-log message and snmp trap noLogAndtrap-no log message and no snmp trap,default 1.
T/F slaIcmpPETargetOnly	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.14	TruthValue	read-write	TRUE(1)-targetOnly FALSE(2)-not targetOnly,default.
T/F slaIcmpPEIsScheduling	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.15	TruthValue	read-only	The scheduling status of ICMP PATH ECHO entity TRUE(1)-in scheduling FALSE(2)-not in scheduling
ROW slaIcmpPETableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.10.100.1.16	RowStatus	read-write	ICMP PATH JITTER row status
sysSlaIcmpPathEchoHistoryTable	1.3.6.1.4.1.5651.3.20.1.1.201.10.200		not-accessible	RTR ICMP PATH ECHO entity history table
sysSlaIcmpPathEchoHistoryEntry	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1		not-accessible	RTR ICMP entity entry
INT slaIcmpPEHisTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.1	INTEGER	read-write	ICMP PATH ECHO entity id,index
INT slaIcmpPEHopIndex	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.2	INTEGER	read-only	ICMP PATH ECHO hop index
INT slaIcmpPEHistoryIndex	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.3	INTEGER	read-only	ICMP PATH ECHO entity history index
INT slaIcmpPERtt	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.4	INTEGER	read-only	ICMP PATH ECHO entity rtt
INT slaIcmpPEPktLoss	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.5	INTEGER	read-only	ICMP PATH ECHO entity packet loss
STR slaIcmpPETime	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.6	DisplayString	read-only	recorded time
INT slaIcmpPEGetStatus	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.7	INTEGER	read-only	1:has get all hop history; 0:has not get all hop history
ROW slaIcmpPEHisTableRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.10.200.1.8	RowStatus	read-write	ICMP PATH ECHO row status
sysSlaThresholdMgt	1.3.6.1.4.1.5651.3.20.1.1.201.11
sysSlaThresholdTable	1.3.6.1.4.1.5651.3.20.1.1.201.11.100		not-accessible	RTR alarm table
sysSlaThresholdEntry	1.3.6.1.4.1.5651.3.20.1.1.201.11.100.1		not-accessible	RTR threshold entry
INT slaThresholdTableEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.11.100.1.1	INTEGER	read-write	SLA entity ID,index
STR slaThresholdString	1.3.6.1.4.1.5651.3.20.1.1.201.11.100.1.2	DisplayString	read-write	icmpEcho-rtt(threshold of icmp echo's rtt,0-9000ms(default:9000ms)), icmpEcho-pktLoss(threshold of icmp echo's pkt loss,0-200000000(default:200000000)), udpEcho-rtt(threshold of udp echo's rtt,0-9000ms(default:9000ms)), udpEcho-pktLoss(threshold of udp echo's packet loss,0-1(default:1)) jitter-rtt(threshold of jitter's rtt,0-9000ms(default:9000ms)), jitter-jitterSd(threshold of jitter entity's jitter from source to dest,0-6000ms(default:6000ms)), jitter-jitterDs(threshold of jitter entity's jitter from dest to source,0-6000ms(default:6000ms)), jitter-delaySd(threshold of jitter entity's delay from source to dest,0-5000ms(default:5000ms)), jitter-delayDs(threshold of jitter entity's delay from dest to source,0-5000ms(default:5000ms)), jitter-pktLossSd(threshold of jitter entity's pkt loss from source to dest,0-200000000(default:200000000)), jitter-PktLossDs(threshold of jitter entity's pkt loss from dest to source,0-200000000(default:200000000)), jitter-mos(threshold of jitter entity's mos,0-10000000(default:10000000)), jitter-icpif(threshold of jitter entity's icpif,0-100000000(default:100000000)), icmpPathJitter-rtt(threshold of icmp path jitter entity's rtt,0-9000ms(default:9000ms)), icmpPathJitter-pktLoss(threshold of icmp path jitter entity's pkt loss,0-200000000(default:200000000)), icmpPathJitter-jitter(threshold of icmp path jitter entity's jitter,0-6000ms(default:6000ms)), icmpPathEcho-rtt(threshold of icmp path echo entity's rtt,0-9000ms(default:9000ms)), icmpPathEcho-pktloss(threshold of icmp path echo entity's [kt loss,0-1(default:1)), flSta-inPkt(threshold of flow statistics entity's input packet,0-200000000(default:200000000)), flSta-inFlow(threshold of flow statistics entity's input flow,0-200000000(default:200000000)), flSta-outPkt(threshold of flow statistics entity's output packet,0-200000000(default:200000000)), flSta-outFlow(threshold of flow statistics entity's output flow,0-200000000(default:200000000)), macping-delay(threshold of mac sla unidrectional delay, 0-5000ms(default:500ms)), macping-rtDelay(threshold of mac sla ring back delay, 0-5000ms(default:500ms)), macping-jitter(threshold of mac sla jitter, 0-5000ms(default:500ms)), macping-lostPC(threshold of mac sla lost percent, 0-50(default:50%))
INT slaThresholdValue	1.3.6.1.4.1.5651.3.20.1.1.201.11.100.1.3	INTEGER	read-write	The value of each threshold
INT slaThresholdDirection	1.3.6.1.4.1.5651.3.20.1.1.201.11.100.1.4	INTEGER	read-write	1(>= -Alarm when result is bigger than or equal to threshold(default)), 2(<= -Alarm when result is smaller than or equal to threshold)
INT slaThresholdIndex	1.3.6.1.4.1.5651.3.20.1.1.201.11.100.1.5	INTEGER	read-write	Only used by equipment.
ROW slaThresholdRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.11.100.1.6	RowStatus	read-write	Rtr entity row status
sysSlaMacPingMgt	1.3.6.1.4.1.5651.3.20.1.1.201.12
mpMacPingTraps	1.3.6.1.4.1.5651.3.20.1.1.201.12.1
sysSlaMacPingTable	1.3.6.1.4.1.5651.3.20.1.1.201.12.100		not-accessible	MAC SLAʵ��Ϣ��
sysSlaMacPingEntry	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1		not-accessible	MAC SLAʵ��Ϣ��
INT slaMacPingEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.1	INTEGER	read-only	MAC SLA ʵ��ID
INT slaMacPingState	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.2	INTEGER	read-only	MAC SLA ʵ�嵱ǰ��״̬��1��stop��2��run��3��pause
STR slaMacPingName	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.3	DisplayString	read-write	MAC SLAʵ��
STR slaMacPingCfmMdId	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.4	DisplayString	read-write	MAC SLAʵ��󶨵�CFM��
STR slaMacPingCfmMaId	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.5	DisplayString	read-write	MAC SLAʵ��󶨵�CFM��ʵ��
U32 slaMacPingCfmSrcMepId	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.6	Unsigned32	read-write	��MAC SLAʵ��Ե�ԴMEP ID
U32 slaMacPingDesMepId	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.7	Unsigned32	read-write	��MAC SLAʵ��Ե�Ŀ��MEP ID
U32 slaMacPingCyclsec	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.8	Unsigned32	read-write	һ��MAC SLA�Ĳ��,Ĭ��600(s),��ֵ��С��slaMacPingSchedInterval(��ڼ��ʱ��)
U32 slaMacPingPktNumPerCycl	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.9	Unsigned32	read-write	һ�β��ڲ��Ա��ĸ��(Ĭ��10��)
U32 slaMacPingAvgCyclNum	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.10	Unsigned32	read-write	ƽ��ֵͳ��ڸ��(Ĭ��5��)
STR slaMacPingLastCycleTime	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.11	DisplayString	read-only	��MAC SLAʵ��һ�ֲ��ʱ��
U32 slaMacPingAvgValueTimes	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.12	Unsigned32	read-only	ƽ��ֵ��ͳ�ƴ��
ROW slaMacPingRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.13	RowStatus	read-create	MAC SLAʵ��Ϣ��״̬
U32 slaMacPingSchedInterval	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.14	Unsigned32	read-write	MAC SLAʵ��ڼ��,Ĭ��605(s), ��ֵ��ڲ��ʱ��slaMacPingCycleTime.
INT slaMacPingHistoryMaxCount	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.15	INTEGER	read-write	MAC SLAʵ��ƽ��ֵ��ʷ��¼��Ĭ��Ϊ�ˣ��255
PHY slaMacPingDesMac	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.16	PhysAddress	read-write	SLA destination mac address ,Ŀ��Mac��ַ
STR slaMacPingRemDevName	1.3.6.1.4.1.5651.3.20.1.1.201.12.100.1.17	DisplayString	read-only	SLA destination device name ,Զ��豸��
sysSlaNmsMgt	1.3.6.1.4.1.5651.3.20.1.1.201.13
sysSlaNmsTable	1.3.6.1.4.1.5651.3.20.1.1.201.13.100		not-accessible	Rtr entity table,config or view information about Rtr entity
sysSlaNmsEntry	1.3.6.1.4.1.5651.3.20.1.1.201.13.100.1		not-accessible	Rtr entity,config or view information about Rtr entity
INT slaNmsEntityId	1.3.6.1.4.1.5651.3.20.1.1.201.13.100.1.1	INTEGER	read-write	Rtr entity Id,index
INT slaNmsScheduleId	1.3.6.1.4.1.5651.3.20.1.1.201.13.100.1.2	INTEGER	read-write	Rtr schedule id.
U32 slaNmsId	1.3.6.1.4.1.5651.3.20.1.1.201.13.100.1.3	Unsigned32	read-write	Rtr NMS schedule Id,specified by NMS(mp5)
ROW slaNmsRowStatus	1.3.6.1.4.1.5651.3.20.1.1.201.13.100.1.4	RowStatus	read-write	rtr entity row status

RFC description

Maipu system trap and SLA properties with severity classification and device type identification.

Start monitoring Maipu Communication router/switch (IP SLA probes) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MPSLA

What Is MPSLA?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description