NBS-SLA-MIB

All MIBs › NBS-SLA-MIB

Organization: NBS

Last Updated: 2010-11-22

Category: OAM

Description: Tracks SLA performance metrics including latency, jitter, and packet loss measurements on NBS network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NBS-SLA-MIB?

NBS-SLA-MIB is an NBase enterprise MIB for representing Service Level Agreement (SLA) test/measurement data, letting a device generate synthetic test traffic and report resulting performance metrics such as latency, jitter, and packet loss. It exposes a traffic generator configuration table controlling frame size, frame count, and inter-packet gap per interface, alongside the action to start/stop a test. It is used to monitor the performance status of network paths rather than the device chassis itself — administrators use SLA test results to confirm a link or path meets contracted latency/jitter/loss targets, and a degraded result flags a network-level fault even when the device's own hardware is healthy. As an active-measurement MIB it conceptually parallels IETF's IPPM/TWAMP-style test frameworks though implemented as an NBase-specific extension. It is typically deployed by service providers on NBase access/transport equipment to continuously validate SLA compliance for business Ethernet or transport services, and engineers can perform an NBS-SLA-MIB download to load these test objects into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NBS-SLA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NBase-Xyplex network/access switch or transport platform

Monitoring Examples

An admin would configure nbsSlaTrafficGenTable/nbsSlaTrafficGenEntry keyed by nbsSlaTrafficGenIfIndex, setting nbsSlaTrafficGenFrameSize, nbsSlaTrafficGenFrameCount, and nbsSlaTrafficGenInterPacketGap, then trigger nbsSlaTrafficGenAction to run a test on that interface. Resulting performance figures measured against the nbsSlaTrafficGenMaxHeaders/nbsSlaTrafficGenMaxPattern test parameters exceeding the contracted SLA threshold would indicate the path is not meeting its committed service level, prompting investigation of the underlying transport.

What Can Be Monitored

SLA test traffic generation state
frame size and count for test traffic
inter-packet gap
per-interface SLA test configuration

Imported Objects

From NBS-CMMC-MIB

InterfaceIndex
nbs	OBJECT-IDENTITY

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using nbsSlaPerfMonFramesAllSizes OID:

Select a NBase-Xyplex network/access switch or transport platform (SLA test/measurement) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type nbsSlaPerfMonFramesAllSizes into the Find box to locate it in the OID tree, then select it and click OK. The count of all monitored frames. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
nbsSlaMib	1.3.6.1.4.1.629.216			MIB for representing Service Level Agreement (SLA) information
nbsSlaTrafficGenGrp	1.3.6.1.4.1.629.216.1			Traffic Generation configuration and reporting capabilities
U32 nbsSlaTrafficGenTableSize	1.3.6.1.4.1.629.216.1.1	Unsigned32	read-only	The number of entries in nbsSlaTrafficGenTable
nbsSlaTrafficGenTable	1.3.6.1.4.1.629.216.1.2		not-accessible	Traffic Generation information.
nbsSlaTrafficGenEntry	1.3.6.1.4.1.629.216.1.2.1		not-accessible	The Traffic Generation port's information
NUM nbsSlaTrafficGenIfIndex	1.3.6.1.4.1.629.216.1.2.1.1	InterfaceIndex	not-accessible	The Mib2 ifIndex of this Traffic Generation port
INT nbsSlaTrafficGenAction	1.3.6.1.4.1.629.216.1.2.1.2	INTEGER	read-write	Different actions to activate the traffic generation. There are three frame generation activities: specify, start, and stop. Specifying and actually starting traffic may be done together or separately. In fact, it is reasonable to specify once, then start (and stop) many times.
INT nbsSlaTrafficGenFrameSize	1.3.6.1.4.1.629.216.1.2.1.3	INTEGER	read-write	Frame Size range from 64 to 9600
INT nbsSlaTrafficGenFrameSizeType	1.3.6.1.4.1.629.216.1.2.1.4	INTEGER	read-write	Specifies the size of generated frames: random, or per 'nbsSlaTrafficGenFrameSize' bytes. The random value range is limited by ANDing it with (the mask value) 'nbsSlaTrafficGenFrameSize'; a zero result is treated as 64.
U32 nbsSlaTrafficGenFrameCount	1.3.6.1.4.1.629.216.1.2.1.5	Unsigned32	read-write	Number of frames to generate when a fixed count is desired.
INT nbsSlaTrafficGenFrameCountType	1.3.6.1.4.1.629.216.1.2.1.6	INTEGER	read-write	Specifies how many frames to generate: a continuous stream that is manually stopped, or a fixed count.
INT nbsSlaTrafficGenInterPacketGap	1.3.6.1.4.1.629.216.1.2.1.7	INTEGER	read-write	Specifies the number of bytes between generated frames; this determines the traffic rate. The default (1249928) sets an approx rate of 100/10/1 fps at 1000/100/10 Mbps.
INT nbsSlaTrafficGenMaxHeaders	1.3.6.1.4.1.629.216.1.2.1.8	INTEGER	read-only	Maximum number of bytes supported in nbsSlaTrafficGenHeaders; zero if not supported
INT nbsSlaTrafficGenMaxPattern	1.3.6.1.4.1.629.216.1.2.1.9	INTEGER	read-only	Maximum number of bytes supported in nbsSlaTrafficGenPattern; zero if not supported
OCT nbsSlaTrafficGenHeaders	1.3.6.1.4.1.629.216.1.2.1.10	OCTET STRING	read-write	Specifies the 48 bytes following the first 64 bytes of generated frames. The remainder of the frame is filled with Pattern bytes.
OCT nbsSlaTrafficGenDa	1.3.6.1.4.1.629.216.1.2.1.11	OCTET STRING	read-write	Destination Address - MAC address
INT nbsSlaTrafficGenDaType	1.3.6.1.4.1.629.216.1.2.1.12	INTEGER	read-write	Specifies the handling of the DA in the Header bytes: generate a random value for each frame, use the same value for each frame, or increment the initial value by 1 for each frame.
OCT nbsSlaTrafficGenSa	1.3.6.1.4.1.629.216.1.2.1.13	OCTET STRING	read-write	Source Address - MAC address
INT nbsSlaTrafficGenSaType	1.3.6.1.4.1.629.216.1.2.1.14	INTEGER	read-write	Specifies the handling of the SA in the Header bytes: generate a random value for each frame, use the same value for each frame, or increment the initial value by 1 for each frame.
OCT nbsSlaTrafficGenTag	1.3.6.1.4.1.629.216.1.2.1.15	OCTET STRING	read-write	VLAN tag or e-type plus initial data If VLAN tagging is not specified (i.e. Tag does not begin as 81-00), then the first two bytes of Tag define the frame type, and the last two Tag bytes are the first two data bytes
INT nbsSlaTrafficGenTagType	1.3.6.1.4.1.629.216.1.2.1.16	INTEGER	read-write	Specifies the handling of the Tag in the Header bytes: generate a random value for each frame, use the same value for each frame, or increment the initial value by 1 for each frame.
OCT nbsSlaTrafficGenPattern	1.3.6.1.4.1.629.216.1.2.1.17	OCTET STRING	read-write	The one to four Pattern bytes are replicated as needed to fill-out the frame to the specified size
INT nbsSlaTrafficGenPatternType	1.3.6.1.4.1.629.216.1.2.1.18	INTEGER	read-write	Specifies the handling of the Pattern bytes that fill-out generated frames: generate a random value for each frame, or use the same value for each frame.
nbsSlaLossGainGrp	1.3.6.1.4.1.629.216.2			Loss Gain Analysis configuration and reporting capabilities
U32 nbsSlaLossGainTableSize	1.3.6.1.4.1.629.216.2.1	Unsigned32	read-only	The number of entries in nbsSlaLossGainTable
nbsSlaLossGainTable	1.3.6.1.4.1.629.216.2.2		not-accessible	Contains a description of Loss/Gain Traffic Analysis information.
nbsSlaLossGainEntry	1.3.6.1.4.1.629.216.2.2.1		not-accessible	Loss/Gain Traffic Analysis entry
NUM nbsSlaLossGainIfIndex	1.3.6.1.4.1.629.216.2.2.1.1	InterfaceIndex	not-accessible	The Mib2 ifIndex of this Loss Gain Analysis port
INT nbsSlaLossGainAction	1.3.6.1.4.1.629.216.2.2.1.2	INTEGER	read-write	Traffic Analysis (loss/gain) activity status.
INT nbsSlaLossGainInterval	1.3.6.1.4.1.629.216.2.2.1.3	INTEGER	read-write	Traffic Analysis (loss/gain) sampling time interval (sec). Practical range allowed is 10 seconds to 1 day.
INT nbsSlaLossGainEthMax	1.3.6.1.4.1.629.216.2.2.1.4	INTEGER	read-only	The maximum size of normal Ethernet frames used when tabulating frames by size, to divide the range 1024-2047 in two: 1024 to EthMax, and EthMax+1 to 2047. It is typically 1518, or 1522 for tagged frames.
UNS nbsSlaLossGainRdAllFrames	1.3.6.1.4.1.629.216.2.2.1.5	Unsigned64	read-only	The count of all frames (good+bad) lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdBadFrames	1.3.6.1.4.1.629.216.2.2.1.6	Unsigned64	read-only	The count of all bad frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdDiscards	1.3.6.1.4.1.629.216.2.2.1.7	Unsigned64	read-only	The count of all bad frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdUcastFrames	1.3.6.1.4.1.629.216.2.2.1.8	Unsigned64	read-only	The count of good unicast frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdMcastFrames	1.3.6.1.4.1.629.216.2.2.1.9	Unsigned64	read-only	The count of good multicast frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdBcastFrames	1.3.6.1.4.1.629.216.2.2.1.10	Unsigned64	read-only	The count of good broadcast frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize64	1.3.6.1.4.1.629.216.2.2.1.11	Unsigned64	read-only	The count of all 64 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize65to127	1.3.6.1.4.1.629.216.2.2.1.12	Unsigned64	read-only	The count of all 65-127 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize128to255	1.3.6.1.4.1.629.216.2.2.1.13	Unsigned64	read-only	The count of all 128-255 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize256to511	1.3.6.1.4.1.629.216.2.2.1.14	Unsigned64	read-only	The count of all 256-511 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize512to1023	1.3.6.1.4.1.629.216.2.2.1.15	Unsigned64	read-only	The count of all 512-1023 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize1024toEthMax	1.3.6.1.4.1.629.216.2.2.1.16	Unsigned64	read-only	The count of all 1024-'EthMax' byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSizeEthMaxto2047	1.3.6.1.4.1.629.216.2.2.1.17	Unsigned64	read-only	The count of all 'EthMax'+1-2047 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize2048to4095	1.3.6.1.4.1.629.216.2.2.1.18	Unsigned64	read-only	The count of all 2048-4095 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize4096to8191	1.3.6.1.4.1.629.216.2.2.1.19	Unsigned64	read-only	The count of all 4096-8191 byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdSize8192orMore	1.3.6.1.4.1.629.216.2.2.1.20	Unsigned64	read-only	The count of all 2048-plus byte frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdFrameDivisor	1.3.6.1.4.1.629.216.2.2.1.21	Unsigned64	read-only	The divisor to calculate frame loss/gain ratios for the most recent interval.
UNS nbsSlaLossGainRdAllOctets	1.3.6.1.4.1.629.216.2.2.1.22	Unsigned64	read-only	The count of all frame octets lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdBadOctets	1.3.6.1.4.1.629.216.2.2.1.23	Unsigned64	read-only	The count of bad frame octets observed in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainRdOctetDivisor	1.3.6.1.4.1.629.216.2.2.1.24	Unsigned64	read-only	The divisor to calculate octet loss/gain ratios for the most recent interval.
U32 nbsSlaLossGainRdTimeSpan	1.3.6.1.4.1.629.216.2.2.1.25	Unsigned32	read-only	The time span (tenths of a sec) for the most recent interval.
UNS nbsSlaLossGainAdAllFrames	1.3.6.1.4.1.629.216.2.2.1.26	Unsigned64	read-only	The accumulated count of all frames (good+bad) lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdBadFrames	1.3.6.1.4.1.629.216.2.2.1.27	Unsigned64	read-only	The accumulated count of all bad frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdDiscards	1.3.6.1.4.1.629.216.2.2.1.28	Unsigned64	read-only	The count of all bad frames lost/gained (-/+) in the most recent interval. Not supported value: 0x80000000
UNS nbsSlaLossGainAdUcastFrames	1.3.6.1.4.1.629.216.2.2.1.29	Unsigned64	read-only	The accumulated count of good unicast frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdMcastFrames	1.3.6.1.4.1.629.216.2.2.1.30	Unsigned64	read-only	The accumulated count of good multicast frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdBcastFrames	1.3.6.1.4.1.629.216.2.2.1.31	Unsigned64	read-only	The accumulated count of good broadcast frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize64	1.3.6.1.4.1.629.216.2.2.1.32	Unsigned64	read-only	The accumulated count of all 64 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize65to127	1.3.6.1.4.1.629.216.2.2.1.33	Unsigned64	read-only	The accumulated count of all 65-127 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize128to255	1.3.6.1.4.1.629.216.2.2.1.34	Unsigned64	read-only	The accumulated count of all 128-255 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize256to511	1.3.6.1.4.1.629.216.2.2.1.35	Unsigned64	read-only	The accumulated count of all 256-511 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize512to1023	1.3.6.1.4.1.629.216.2.2.1.36	Unsigned64	read-only	The accumulated count of all 512-1023 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize1024toEthMax	1.3.6.1.4.1.629.216.2.2.1.37	Unsigned64	read-only	The accumulated count of all 1024-'EthMax' byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSizeEthMaxto2047	1.3.6.1.4.1.629.216.2.2.1.38	Unsigned64	read-only	The accumulated count of all 'EthMax'+1-2047 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize2048to4095	1.3.6.1.4.1.629.216.2.2.1.39	Unsigned64	read-only	The accumulated count of all 2048-4095 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize4096to8191	1.3.6.1.4.1.629.216.2.2.1.40	Unsigned64	read-only	The accumulated count of all 4096-8191 byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdSize8192orMore	1.3.6.1.4.1.629.216.2.2.1.41	Unsigned64	read-only	The accumulated count of all 8192-plus byte frames lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdFrameDivisor	1.3.6.1.4.1.629.216.2.2.1.42	Unsigned64	read-only	The divisor to calculate frame loss/gain ratios over all intervals.
UNS nbsSlaLossGainAdAllOctets	1.3.6.1.4.1.629.216.2.2.1.43	Unsigned64	read-only	The accumulated count of all frame octets lost/gained (-/+) over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdBadOctets	1.3.6.1.4.1.629.216.2.2.1.44	Unsigned64	read-only	The accumulated count of all bad octets observed over all intervals. Not supported value: 0x80000000
UNS nbsSlaLossGainAdOctetDivisor	1.3.6.1.4.1.629.216.2.2.1.45	Unsigned64	read-only	The divisor to calculate octet loss/gain ratios over all intervals.
U32 nbsSlaLossGainAdTimeSpan	1.3.6.1.4.1.629.216.2.2.1.46	Unsigned32	read-only	The accumulated time span (tenths of a sec) for all intervals.
nbsSlaPerfMonGrp	1.3.6.1.4.1.629.216.3			Performance Monitoring configuration and reporting capabilities
U32 nbsSlaPerfMonTableSize	1.3.6.1.4.1.629.216.3.1	Unsigned32	read-only	The number of entries in nbsSlaPerfMonTable
nbsSlaPerfMonTable	1.3.6.1.4.1.629.216.3.2		not-accessible	Contains a description of Performance Monitoring information.
nbsSlaPerfMonEntry	1.3.6.1.4.1.629.216.3.2.1		not-accessible	Performance Monitoring entry
NUM nbsSlaPerfMonIfIndex	1.3.6.1.4.1.629.216.3.2.1.1	InterfaceIndex	not-accessible	The Mib2 ifIndex of this Performance Monitoring port
INT nbsSlaPerfMonAction	1.3.6.1.4.1.629.216.3.2.1.2	INTEGER	read-write	Traffic Analysis (performance monitoring) activity status.
INT nbsSlaPerfMonSize	1.3.6.1.4.1.629.216.3.2.1.3	INTEGER	read-write	Performance Monitoring frame size specification: 1 = random-sized frames in the range 64-127 bytes 2 = random-sized frames in the range 64-255 bytes 3 = random-sized frames in the range 64-511 bytes 4 = random-sized frames in the range 64-1023 bytes 5 = random-sized frames in the range 64-2047 bytes 6 = random-sized frames in the range 64-4095 bytes 7 = random-sized frames in the range 64-8191 bytes 64..9600 = fixed-size frames of specified byte count.
INT nbsSlaPerfMonDuration	1.3.6.1.4.1.629.216.3.2.1.4	INTEGER	read-write	Performance Monitoring time duration (sec). Practical range allowed is 1 minute to 1 week.
INT nbsSlaPerfMonTimeLeft	1.3.6.1.4.1.629.216.3.2.1.5	INTEGER	read-only	Amount of time remaining in the monitoring duration (sec); a negative value means not available.
INT nbsSlaPerfMonEthMax	1.3.6.1.4.1.629.216.3.2.1.6	INTEGER	read-only	The maximum size of normal Ethernet frames used when tabulating frames by size, to divide the range 1024-2047 in two: 1024 to EthMax, and EthMax+1 to 2047. It is typically 1518, or 1522 for tagged frames.
U32 nbsSlaPerfMonAvgAllSizes	1.3.6.1.4.1.629.216.3.2.1.7	Unsigned32	read-only	The average transit time (nanosec) for monitored frames.
U32 nbsSlaPerfMonAvg64	1.3.6.1.4.1.629.216.3.2.1.8	Unsigned32	read-only	The average transit time (nanosec) for monitored 64 byte frames.
U32 nbsSlaPerfMonAvg65to127	1.3.6.1.4.1.629.216.3.2.1.9	Unsigned32	read-only	The average transit time (nanosec) for monitored 65-127 byte frames.
U32 nbsSlaPerfMonAvg128to255	1.3.6.1.4.1.629.216.3.2.1.10	Unsigned32	read-only	The average transit time (nanosec) for monitored 128-255 byte frames.
U32 nbsSlaPerfMonAvg256to511	1.3.6.1.4.1.629.216.3.2.1.11	Unsigned32	read-only	The average transit time (nanosec) for monitored 256-511 byte frames.
U32 nbsSlaPerfMonAvg512to1023	1.3.6.1.4.1.629.216.3.2.1.12	Unsigned32	read-only	The average transit time (nanosec) for monitored 512-1023 byte frames.
U32 nbsSlaPerfMonAvg1024toEthMax	1.3.6.1.4.1.629.216.3.2.1.13	Unsigned32	read-only	The average transit time (nanosec) for monitored 1024-'EthMax' byte frames.
U32 nbsSlaPerfMonAvgEthMaxto2047	1.3.6.1.4.1.629.216.3.2.1.14	Unsigned32	read-only	The average transit time (nanosec) for monitored 'EthMax'+1-2047 byte frames.
U32 nbsSlaPerfMonAvg2048to4095	1.3.6.1.4.1.629.216.3.2.1.15	Unsigned32	read-only	The average transit time (nanosec) for monitored 2048-4095 byte frames.
U32 nbsSlaPerfMonAvg4096to8191	1.3.6.1.4.1.629.216.3.2.1.16	Unsigned32	read-only	The average transit time (nanosec) for monitored 4096-8191 byte frames.
U32 nbsSlaPerfMonAvg8192orMore	1.3.6.1.4.1.629.216.3.2.1.17	Unsigned32	read-only	The average transit time (nanosec) for monitored 8192-plus byte frames.
U32 nbsSlaPerfMonMinAllSizes	1.3.6.1.4.1.629.216.3.2.1.18	Unsigned32	read-only	The minimum transit time (nanosec) for monitored frames.
U32 nbsSlaPerfMonMin64	1.3.6.1.4.1.629.216.3.2.1.19	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 64 byte frames.
U32 nbsSlaPerfMonMin65to127	1.3.6.1.4.1.629.216.3.2.1.20	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 65-127 byte frames.
U32 nbsSlaPerfMonMin128to255	1.3.6.1.4.1.629.216.3.2.1.21	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 128-255 byte frames.
U32 nbsSlaPerfMonMin256to511	1.3.6.1.4.1.629.216.3.2.1.22	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 256-511 byte frames.
U32 nbsSlaPerfMonMin512to1023	1.3.6.1.4.1.629.216.3.2.1.23	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 512-1023 byte frames.
U32 nbsSlaPerfMonMin1024toEthMax	1.3.6.1.4.1.629.216.3.2.1.24	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 1024-'EthMax' byte frames.
U32 nbsSlaPerfMonMinEthMaxto2047	1.3.6.1.4.1.629.216.3.2.1.25	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 'EthMax'+1-2047 byte frames.
U32 nbsSlaPerfMonMin2048to4095	1.3.6.1.4.1.629.216.3.2.1.26	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 2048-4095 byte frames.
U32 nbsSlaPerfMonMin4096to8191	1.3.6.1.4.1.629.216.3.2.1.27	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 4096-8191 byte frames.
U32 nbsSlaPerfMonMin8192orMore	1.3.6.1.4.1.629.216.3.2.1.28	Unsigned32	read-only	The minimum transit time (nanosec) for monitored 8192-plus byte frames.
U32 nbsSlaPerfMonMaxAllSizes	1.3.6.1.4.1.629.216.3.2.1.29	Unsigned32	read-only	The maximum transit time (nanosec) for monitored frames.
U32 nbsSlaPerfMonMax64	1.3.6.1.4.1.629.216.3.2.1.30	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 64 byte frames.
U32 nbsSlaPerfMonMax65to127	1.3.6.1.4.1.629.216.3.2.1.31	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 65-127 byte frames.
U32 nbsSlaPerfMonMax128to255	1.3.6.1.4.1.629.216.3.2.1.32	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 128-255 byte frames.
U32 nbsSlaPerfMonMax256to511	1.3.6.1.4.1.629.216.3.2.1.33	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 256-511 byte frames.
U32 nbsSlaPerfMonMax512to1023	1.3.6.1.4.1.629.216.3.2.1.34	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 512-1023 byte frames.
U32 nbsSlaPerfMonMax1024toEthMax	1.3.6.1.4.1.629.216.3.2.1.35	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 1024-'EthMax' byte frames.
U32 nbsSlaPerfMonMaxEthMaxto2047	1.3.6.1.4.1.629.216.3.2.1.36	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 'EthMax'+1-2047 byte frames.
U32 nbsSlaPerfMonMax2048to4095	1.3.6.1.4.1.629.216.3.2.1.37	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 4096-8191 byte frames.
U32 nbsSlaPerfMonMax4096to8191	1.3.6.1.4.1.629.216.3.2.1.38	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 4096-8191 byte frames.
U32 nbsSlaPerfMonMax8192orMore	1.3.6.1.4.1.629.216.3.2.1.39	Unsigned32	read-only	The maximum transit time (nanosec) for monitored 8192-plus byte frames.
C64 nbsSlaPerfMonFramesAllSizesEx	1.3.6.1.4.1.629.216.3.2.1.40	Counter64	read-only	The count of all monitored frames.
C64 nbsSlaPerfMonFrames64	1.3.6.1.4.1.629.216.3.2.1.41	Counter64	read-only	The count of all monitored 64 byte frames.
C64 nbsSlaPerfMonFrames65to127	1.3.6.1.4.1.629.216.3.2.1.42	Counter64	read-only	The count of all monitored 65-127 byte frames.
C64 nbsSlaPerfMonFrames128to255	1.3.6.1.4.1.629.216.3.2.1.43	Counter64	read-only	The count of all monitored 128-255 byte frames.
C64 nbsSlaPerfMonFrames256to511	1.3.6.1.4.1.629.216.3.2.1.44	Counter64	read-only	The count of all monitored 256-511 byte frames.
C64 nbsSlaPerfMonFrames512to1023	1.3.6.1.4.1.629.216.3.2.1.45	Counter64	read-only	The count of all monitored 512-1023 byte frames.
C64 nbsSlaPerfMonFrames1024toEthMax	1.3.6.1.4.1.629.216.3.2.1.46	Counter64	read-only	The count of all monitored 1024-'EthMax' byte frames.
C64 nbsSlaPerfMonFramesEthMaxto2047	1.3.6.1.4.1.629.216.3.2.1.47	Counter64	read-only	The count of all monitored 'EthMax'+1-2047 byte frames.
C64 nbsSlaPerfMonFrames2048to4095	1.3.6.1.4.1.629.216.3.2.1.48	Counter64	read-only	The count of all monitored 2048-4095 byte frames.
C64 nbsSlaPerfMonFrames4096to8191	1.3.6.1.4.1.629.216.3.2.1.49	Counter64	read-only	The count of all monitored 4096-8191 byte frames.
C64 nbsSlaPerfMonFrames8192orMore	1.3.6.1.4.1.629.216.3.2.1.50	Counter64	read-only	The count of all monitored 8192-plus byte frames.
C64 nbsSlaPerfMonOctetsAllSizes	1.3.6.1.4.1.629.216.3.2.1.51	Counter64	read-only	The count of octets in all monitored frames.
C64 nbsSlaPerfMonOctets64	1.3.6.1.4.1.629.216.3.2.1.52	Counter64	read-only	The count of octets in all monitored 64 byte frames.
C64 nbsSlaPerfMonOctets65to127	1.3.6.1.4.1.629.216.3.2.1.53	Counter64	read-only	The count of octets in all monitored 65-127 byte frames.
C64 nbsSlaPerfMonOctets128to255	1.3.6.1.4.1.629.216.3.2.1.54	Counter64	read-only	The count of octets in all monitored 128-255 byte frames.
C64 nbsSlaPerfMonOctets256to511	1.3.6.1.4.1.629.216.3.2.1.55	Counter64	read-only	The count of octets in all monitored 256-511 byte frames.
C64 nbsSlaPerfMonOctets512to1023	1.3.6.1.4.1.629.216.3.2.1.56	Counter64	read-only	The count of octets in all monitored 512-1023 byte frames.
C64 nbsSlaPerfMonOctets1024toEthMax	1.3.6.1.4.1.629.216.3.2.1.57	Counter64	read-only	The count of octets in all monitored 1024-'EthMax' byte frames.
C64 nbsSlaPerfMonOctetsEthMaxto2047	1.3.6.1.4.1.629.216.3.2.1.58	Counter64	read-only	The count of octets in all monitored 'EthMax'+1-2047 byte frames.
C64 nbsSlaPerfMonOctets2048to4095	1.3.6.1.4.1.629.216.3.2.1.59	Counter64	read-only	The count of octets in all monitored 2048-4095 byte frames.
C64 nbsSlaPerfMonOctets4096to8191	1.3.6.1.4.1.629.216.3.2.1.60	Counter64	read-only	The count of octets in all monitored 4096-8191 byte frames.
C64 nbsSlaPerfMonOctets8192orMore	1.3.6.1.4.1.629.216.3.2.1.61	Counter64	read-only	The count of octets in all monitored 8192-plus byte frames.

RFC description

NBS Service Level Agreement MIB for traffic generation, loss analysis, and performance monitoring configuration.

Start monitoring NBase-Xyplex network/access switch or transport platform (SLA test/measurement) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NBS-SLA-MIB