All MIBs › MOXA-EDS408A-MIB › enableWarmStart
enableWarmStart
Module: MOXA-EDS408A-MIB
OID (symbolic): MOXA-EDS408A-MIB::enableWarmStart
OID (numeric): 1.3.6.1.4.1.8691.7.7.1.36
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enable to restart MOXA ethernet switch.
What is enableWarmStart?
Setting this to yes(1) restarts the switch in software (a warm start) without a full power cycle. Admins use it to remotely reboot a switch to apply certain configuration changes without needing physical access.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8691.7.7.1.36 snmpwalk -v2c -c public <target> MOXA-EDS408A-MIB::enableWarmStart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8691.7.7.1.36.1 snmpget -v2c -c public <target> MOXA-EDS408A-MIB::enableWarmStart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8691.7.7.1.36.1 i <value>
Start monitoring Moxa EDS-408A industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MOXA-EDS408A-MIB::enableWarmStart OID value, configure state conditions and alerts, and monitor any Moxa EDS-408A industrial Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8691 | moxa | MOXA-CN2600-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8691.7 | industrialEthernet | MOXA-EDS408A-MIB |
| 1.3.6.1.4.1.8691.7.7 | eds408a | MOXA-EDS408A-MIB |
| 1.3.6.1.4.1.8691.7.7.1 | swMgmt | MOXA-EDS408A-MIB |
| 1.3.6.1.4.1.8691.7.7.1.36 | enableWarmStart | MOXA-EDS408A-MIB |