| OID symbolic | OID numeric | Type | Access | Description |
|---|
| dlinkSwDhcpRelayMIB | 1.3.6.1.4.1.171.26.23 | | | This MIB module defines objects for BOOTP/DHCP relay. |
| dDhcpRelayMIBNotifications | 1.3.6.1.4.1.171.26.23.0 | | | |
| dDhcpRelayMIBObjects | 1.3.6.1.4.1.171.26.23.1 | | | |
| dDhcpRelayGeneral | 1.3.6.1.4.1.171.26.23.1.1 | | | |
| T/F dDhcpRelayAgentInfoCheckEnabled | 1.3.6.1.4.1.171.26.23.1.1.1 | TruthValue | read-write | This object indicates whether the DHCP relay agent validates the
relay agent information option in the received DHCP reply packet. |
| T/F dDhcpRelayAgentInfoInsertEnabled | 1.3.6.1.4.1.171.26.23.1.1.2 | TruthValue | read-write | This object indicates whether the DHCP relay agent inserts relay
agent information option (option 82). |
| INT dDhcpRelayAgentInfoPolicy | 1.3.6.1.4.1.171.26.23.1.1.3 | INTEGER | read-write | This object indicates the re-forwarding policy of DHCP relay agent
information option 82.
drop (1) - discards the packet that already has the relay
option.
keep (2) - the DHCP requests packet that already has the relay
option is left unchanged and directly relayed to the
DHCP server.
replace (3) - the DHCP requests packet that already has the relay
option will be replaced by a new option. |
| T/F dDhcpRelayInfoTrustAll | 1.3.6.1.4.1.171.26.23.1.1.4 | TruthValue | read-write | This object indicates whether the DHCP relay agent trusts the DHCP
relay information for all interfaces. |
| T/F dDhcpRelaySmartRelay | 1.3.6.1.4.1.171.26.23.1.1.5 | TruthValue | read-write | This object indicates the status of smart relay function.
By default, the relay agent sets the gateway address field of the
packet to the primary address of the interface. When the received
interface of the packet has secondary addresses and smart relay is
enabled, relay agent will count the number that a client retries
sending of the DISCOVER message. The relay agent will switch the
gateway address to secondary address of the received interface
after three retries. |
| INT dDhcpROption82RemoteIdType | 1.3.6.1.4.1.171.26.23.1.1.6 | INTEGER | read-write | This object indicates the type of remote ID sub-option.
default(1) - MAC address of VLAN 1.
userDefined(2) - The value of dDhcpROption82RemoteID is used.
vendor2(4) - System Name.
vendor3(5) - The value of dDhcpRPortIfOp82RemIdVendor3Cfg
of the corresponding entry is used. |
| STR dDhcpROption82RemoteIdUserDef | 1.3.6.1.4.1.171.26.23.1.1.7 | DisplayString | read-write | This object indicates the global user defined string as the remote
ID of the device.
This object can be modified when dDhcpROption82RemoteIdType is set
to 'userDefined'.
When read, a zero length string is returned when dDhcpROption82RemoteIdType
is not 'userDefined'. |
| INT dDhcpROption82CircuitIdType | 1.3.6.1.4.1.171.26.23.1.1.8 | INTEGER | read-write | This object indicates the type of circuit ID sub-option.
default(1) - VLAN ID, Module ID and Port Number.
userDefined(2) - The value of dDhcpROption82CircuitID is used.
vendor1(3) - VLAN ID, Slot ID, Port Number and MAC address of VLAN 1.
vendor2(4) - Port Number.
vendor3(5) - The value of dDhcpRPortIfOp82CirIdVendor3Cfg
of the corresponding entry is used.
vendor4(6) - System Name, Module ID, Port Number and Client's VLAN ID.
vendor5(7) - System Name, 'eth', Chassis ID, Slot ID, Port
Number and Client's VLAN ID.
vendor6(8) - 'Ethernet', Chassis ID, Slot ID, Port
Number, Client's VLAN ID and System Name. |
| STR dDhcpROption82CircuitIdUserDef | 1.3.6.1.4.1.171.26.23.1.1.9 | DisplayString | read-write | This object indicates the global user defined string as the circuit ID.
This object can be modified when dDhcpROption82CircuitIdType is set
to 'userDefined'.
When read, a zero length string is returned when dDhcpROption82CircuitIdType
is not 'userDefined'. |
| dDhcpRPoolObjects | 1.3.6.1.4.1.171.26.23.1.2 | | | |
| dDhcpRPoolClassRelayTargetTable | 1.3.6.1.4.1.171.26.23.1.2.1 | | not-accessible | A table that contains relay target class configuration for DHCP pools. |
| dDhcpRPoolClassRelayTargetEntry | 1.3.6.1.4.1.171.26.23.1.2.1.1 | | not-accessible | By using DHCP class, DHCP relay uses option configuration to further
determine which DHCP relay target for relaying the packet that
matches the value pattern of option defined in the class. |
| STR dDhcpRPoClRelayTargetPoolName | 1.3.6.1.4.1.171.26.23.1.2.1.1.1 | DisplayString | not-accessible | This object specifies a DHCP pool.
The value must be same as an entry in dDhcpSPoolTable identified by
dDhcpSPoolName. |
| STR dDhcpRPoClRelayTargetClassName | 1.3.6.1.4.1.171.26.23.1.2.1.1.2 | DisplayString | not-accessible | This object specifies a DHCP class.
The value must be same as an entry in dDhcpSClassTable identified by
dDhcpSClassName. |
| STR dDhcpRPoClRelayTargetVrfName | 1.3.6.1.4.1.171.26.23.1.2.1.1.3 | DisplayString | not-accessible | The name of virtual routing and forwarding (VRF).
If this object is a zero length string, the relay target is in
global routing and forwarding space. |
| IP dDhcpRPoClRelayTargetAddr | 1.3.6.1.4.1.171.26.23.1.2.1.1.4 | IpAddress | not-accessible | This object indicates the IP address of the target server for
the class. |
| ROW dDhcpRPoClRelayTargetRowStatus | 1.3.6.1.4.1.171.26.23.1.2.1.1.99 | RowStatus | read-create | This object manages this entry. |
| dDhcpRPoolRelayDestTable | 1.3.6.1.4.1.171.26.23.1.2.2 | | not-accessible | A table that contains DHCP relay destination IP address of DHCP
pools. |
| dDhcpRPoolRelayDestEntry | 1.3.6.1.4.1.171.26.23.1.2.2.1 | | not-accessible | By using DHCP class, DHCP relay uses option configuration to further
determine which IP addresses to allocate to clients. |
| STR dDhcpRPoolRelayDestPoolName | 1.3.6.1.4.1.171.26.23.1.2.2.1.1 | DisplayString | not-accessible | This object specifies a DHCP pool.
The value must be same as an entry in dDhcpSPoolTable identified by
dDhcpSPoolName. |
| STR dDhcpRPoolRelayDestVrfName | 1.3.6.1.4.1.171.26.23.1.2.2.1.2 | DisplayString | not-accessible | The name of virtual routing and forwarding(VRF).
If this object is a zero length string, the destination DHCP server
IP address is in global routing and forwarding space. |
| IP dDhcpRPoolRelayDestAddr | 1.3.6.1.4.1.171.26.23.1.2.2.1.3 | IpAddress | not-accessible | This object indicates the IP address of the relay destination for
the pool. |
| ROW dDhcpRPoolRelayDestRowStatus | 1.3.6.1.4.1.171.26.23.1.2.2.1.99 | RowStatus | read-create | This object manages this entry. |
| dDhcpRPoolRelaySourceTable | 1.3.6.1.4.1.171.26.23.1.2.3 | | not-accessible | A table that contains the configuration of the source subnet that
the client packets come from. |
| dDhcpRPoolRelaySourceEntry | 1.3.6.1.4.1.171.26.23.1.2.3.1 | | not-accessible | An entry identifying a surce subnet that the client packets come
from. |
| STR dDhcpRPoolRelaySourcePoolName | 1.3.6.1.4.1.171.26.23.1.2.3.1.1 | DisplayString | not-accessible | This object specifies a DHCP pool.
The value must be same as an entry in dDhcpSPoolTable identified by
dDhcpSPoolName. |
| IP dDhcpRPoolRelaySourceSubnet | 1.3.6.1.4.1.171.26.23.1.2.3.1.2 | IpAddress | not-accessible | This object indicates the source subnet of the client packets
come from of the corresponding entry. |
| IP dDhcpRPoolRelaySourceSubnetMask | 1.3.6.1.4.1.171.26.23.1.2.3.1.3 | IpAddress | not-accessible | This object indicates the network mask of the source subnet
for the corresponding entry. |
| ROW dDhcpRPoolRelaySourceRowStatus | 1.3.6.1.4.1.171.26.23.1.2.3.1.99 | RowStatus | read-create | This object manages this entry. |
| dDhcpRelayIfObjects | 1.3.6.1.4.1.171.26.23.1.3 | | | |
| dDhcpRIfIgnoreBootpTable | 1.3.6.1.4.1.171.26.23.1.3.1 | | not-accessible | A list of configurations about the BOOTP/DHCP relay will ignore
BOOTP packet on an interface.
An entry is created/removed when ignoring the BOOTP request
packets is enabled or disabled on an interface via CLI or by
issuing appropriate sets to this table using snmp. |
| dDhcpRIfIgnoreBootpEntry | 1.3.6.1.4.1.171.26.23.1.3.1.1 | | not-accessible | Defines an entry in the dDhcpRelayAddrTable. |
| NUM dDhcpRIfIgnoreBootpIfIndex | 1.3.6.1.4.1.171.26.23.1.3.1.1.1 | InterfaceIndex | not-accessible | The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object. |
| T/F dDhcpRIfIgnoreBootpEnabled | 1.3.6.1.4.1.171.26.23.1.3.1.1.2 | TruthValue | read-write | This object indicates whether the interface ignore the bootp packet or not. |
| dDhcpRIfAgentInfoChkTable | 1.3.6.1.4.1.171.26.23.1.3.2 | | not-accessible | A list of configurations about the DHCP relay validates the
relay agent information (option 82) in the received DHCP reply packet
on an interface.
An entry is created/removed when checking option 82 is or not configured
on an interface via CLI or by issuing appropriate sets to this table
using snmp.
If checking option 82 is not configured for an interface, the global
setting, dDhcpRelayAgentInfoCheckEnabled takes effect. If checking
option 82 is configured for an interface, the interface setting takes
effect. |
| dDhcpRIfAgentInfoChkEntry | 1.3.6.1.4.1.171.26.23.1.3.2.1 | | not-accessible | Defines an entry in the dDhcpRIfInfoChkTable. |
| NUM dDhcpRIfAgentInfoChkIfIndex | 1.3.6.1.4.1.171.26.23.1.3.2.1.1 | InterfaceIndex | not-accessible | The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object. |
| INT dDhcpRIfAgentInfoChkState | 1.3.6.1.4.1.171.26.23.1.3.2.1.2 | INTEGER | read-create | This object indicates whether the DHCP relay agent validates the
relay agent information option in the received DHCP reply packet
on the corresponding interface. |
| dDhcpRIfAgentInfoInsertTable | 1.3.6.1.4.1.171.26.23.1.3.3 | | not-accessible | A list of configurations about whether insert option 82 for
an interface during relay of DHCP request packets.
An entry is created/removed when the insertion of
option 82 is or not configured on an interface via CLI
or by issuing appropriate sets to this table using snmp.
If the insertion of option 82 is not configured for an interface,
the global setting, dDhcpRelayAgentInfoInsertEnabled takes effect. If checking
option 82 is configured for an interface, the interface setting takes
effect. |
| dDhcpRIfAgentInfoInsertEntry | 1.3.6.1.4.1.171.26.23.1.3.3.1 | | not-accessible | Defines an entry in the dDhcpRIfAgentInfoInsertTable. |
| NUM dDhcpRIfAgentInfoInsertIfIndex | 1.3.6.1.4.1.171.26.23.1.3.3.1.1 | InterfaceIndex | not-accessible | The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object. |
| INT dDhcpRIfAgentInfoInsertState | 1.3.6.1.4.1.171.26.23.1.3.3.1.2 | INTEGER | read-create | This object indicates whether insert option 82 for an interface
during relay of DHCP request packets. |
| dDhcpRIfAgentInfoPolicyTable | 1.3.6.1.4.1.171.26.23.1.3.4 | | not-accessible | A list of configurations about relay agent information
re-forwarding policy for the DHCP relay agent on an interface.
An entry is created/removed when the re-forwarding policy
is or not configured on an interface via CLI
or by issuing appropriate sets to this table using snmp.
If the re-forwarding policy is not configured for an interface,
the global setting, dDhcpRelayAgentInfoPolicy takes effect. If
re-forwarding policy is configured for an interface, the interface
setting takes effect. |
| dDhcpRIfAgentInfoPolicyEntry | 1.3.6.1.4.1.171.26.23.1.3.4.1 | | not-accessible | Defines an entry in the dDhcpRIfAgentInfoPolicyTable. |
| NUM dDhcpRIfAgentInfoPolicyIfIndex | 1.3.6.1.4.1.171.26.23.1.3.4.1.1 | InterfaceIndex | not-accessible | The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object. |
| INT dDhcpRIfAgentInfoPolicyAction | 1.3.6.1.4.1.171.26.23.1.3.4.1.2 | INTEGER | read-create | This object indicates the re-forwarding policy of DHCP relay agent
information option 82 for the corresponding interface.
drop (1) - discards the packet that already has the relay
option.
keep (2) - the DHCP requests packet that already has the relay
option is left unchanged and directly relayed to the
DHCP server.
replace (3) - the DHCP requests packet that already has the relay
option will be replaced by a new option.
none (4) - not configure the policy action on the interface. |
| dDhcpRIfAgentInfoTrustTable | 1.3.6.1.4.1.171.26.23.1.3.5 | | not-accessible | A list of configurations about the relay agent trusts the relay
information on an interface.
An entry is created/removed when the trusting relay information
is enabled/disabled on an interface via CLI or by issuing
appropriate sets to this table using snmp.
If dDhcpRelayInfoTrustAll is 'true', the dhcp relay information is
trusted for all interfaces. If dDhcpRelayInfoTrustAll is 'false',
the trust state on an interface is determined whether
the corresponding interface exists in this table. If exists, the
corresponding interface is trusted, otherwise, the interface is not
trusted.
When relay information is trusted on an interface, the
arriving packets with giaddr==0 (this relay agent is the first
relay of this DHCP request packet) but with relay agent information
option present will be accepted. If it is un-trusted, these packets
will be dropped. |
| dDhcpRIfAgentInfoTrustEntry | 1.3.6.1.4.1.171.26.23.1.3.5.1 | | not-accessible | Defines an entry in the dDhcpRIfAgentInfoTrustTable. |
| NUM dDhcpRIfAgentInfoTrustIfIndex | 1.3.6.1.4.1.171.26.23.1.3.5.1.1 | InterfaceIndex | not-accessible | The ifIndex value of the interface.
Only VLAN interfaces are valid interfaces for this object. |
| T/F dDhcpRIfAgentInfoTrustEnabled | 1.3.6.1.4.1.171.26.23.1.3.5.1.2 | TruthValue | read-write | This object indicates whether the interface is trusted on
the not. |
| dDhcpRelayPortIfOption82Objects | 1.3.6.1.4.1.171.26.23.1.4 | | | |
| dDhcpRPortIfOp82RemIdTable | 1.3.6.1.4.1.171.26.23.1.4.1 | | not-accessible | This table is used to manage the remote ID sub-option of Option 82
for physical port or port channel interface. |
| dDhcpRPortIfOp82RemIdEntry | 1.3.6.1.4.1.171.26.23.1.4.1.1 | | not-accessible | An entry in dDhcpRPortIfOption82RemIdTable containing the
configuration about the remote ID sub-option of Option 82 for the
corresponding interface. |
| NUM dDhcpRPortIfOp82RemIdIfIndex | 1.3.6.1.4.1.171.26.23.1.4.1.1.1 | InterfaceIndex | not-accessible | This object indicates the ifIndex value of the port or port channel.
Only physical port and port channel interface will appear in this
table. |
| STR dDhcpRPortIfOp82RemIdVendor3Cfg | 1.3.6.1.4.1.171.26.23.1.4.1.1.2 | DisplayString | read-write | This object indicates the per port/port channel user defined
string as remote ID.
This object is used when dDhcpROption82RemoteIdType is set to
'vendor3'. |
| dDhcpRPortIfOp82CirIdTable | 1.3.6.1.4.1.171.26.23.1.4.2 | | not-accessible | This table is used to manage the circuit ID sub-option of Option 82
for physical port or port channel interface. |
| dDhcpRPortIfOp82CirIdEntry | 1.3.6.1.4.1.171.26.23.1.4.2.1 | | not-accessible | An entry in dDhcpRPortIfOp82CirIdTable containing the
configuration about the circuit ID sub-option of Option 82 for the
corresponding interface. |
| NUM dDhcpRPortIfOp82CirIdIfIndex | 1.3.6.1.4.1.171.26.23.1.4.2.1.1 | InterfaceIndex | not-accessible | This object indicates the ifIndex value of the port or port channel.
Only physical port and port channel interface will appear in this
table. |
| STR dDhcpRPortIfOp82CirIdVendor3Cfg | 1.3.6.1.4.1.171.26.23.1.4.2.1.2 | DisplayString | read-write | This object indicates the per port/port channel user defined
string as circuit ID.
This object is used when dDhcpROption82CircuitIdType is set to
'vendor3'. |
| dDhcpRelayVlanObjects | 1.3.6.1.4.1.171.26.23.1.5 | | | |
| DLI dDhcpRVlanLocalRelayCrlFirst2K | 1.3.6.1.4.1.171.26.23.1.5.1 | Dlink2kVlanList | read-write | This object specifies the DHCP Local Relay enabled VLAN in a
string of octets containing one bit per VLAN for VLANs 1 to 2048.
If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay. |
| DLI dDhcpRVlanLocalRelayCrlSecond2K | 1.3.6.1.4.1.171.26.23.1.5.2 | Dlink2kVlanList | read-write | This object specifies the DHCP Local Relay enabled VLAN in a
string of octets containing one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the VLAN is enabled for DHCP Local Relay. |
| dDhcpRelayMIBConformance | 1.3.6.1.4.1.171.26.23.2 | | | |
| dDhcpRelayCompliances | 1.3.6.1.4.1.171.26.23.2.1 | | | |
| dDhcpRelayCompliance | 1.3.6.1.4.1.171.26.23.2.1.1 | | | The compliance statement for entities which implement the
DLINK-DHCP-RELAY-IPV4-MIB. |
| dDhcpRelayGroups | 1.3.6.1.4.1.171.26.23.2.2 | | | |
| dDhcpRGblCfgGroup | 1.3.6.1.4.1.171.26.23.2.2.1 | | | A collection of objects providing global configuration about DHCP
relay. |
| dDhcpRPoolCfgGroup | 1.3.6.1.4.1.171.26.23.2.2.2 | | | A collection of objects providing DHCP pool configuration. |
| dDhcpRInterfaceGroup | 1.3.6.1.4.1.171.26.23.2.2.3 | | | A collection of objects providing per interface configuration of
DHCP Relay. |
| dDhcpROp82SuboptionGroup | 1.3.6.1.4.1.171.26.23.2.2.4 | | | A collection of objects providing sub-options configuration of option 82. |
| dDhcpRVlanCfgGroup | 1.3.6.1.4.1.171.26.23.2.2.5 | | | A collection of objects which are used to configure as
well as show information regarding the feature enabling
on each VLAN. |
