All MIBs › MIMOSA-NETWORKS-BASE-MIB
Organization: Mimosa Networks www.mimosa.co
Last Updated: 2015-06-03
Category: Wireless/WiFi
Description:
Manages Mimosa Networks base system identity, configuration, and device status.
Imported Objects
From IF-MIB
| ifIndex | OBJECT-TYPE |
From RFC1155-SMI
| enterprises |
From SNMPv2-CONF
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
What Is MIMOSA-NETWORKS-BASE-MIB?
MIMOSA-NETWORKS-BASE-MIB is a Mimosa Networks proprietary MIB that manages base system identity, configuration, and device status for Mimosa's fixed-wireless/microwave backhaul and access hardware. It exposes product and hardware/software identification objects alongside operational data related to link speed changes, and defines a trap for reporting notable events. MIMOSA-NETWORKS-BASE-MIB SNMP monitoring covers software/link status: mimosaOldSpeed and mimosaNewSpeed let an operator see when a wireless link's negotiated speed changes (a common indicator of RF interference or link degradation), while mimosaTrapMessage carries human-readable status/fault text for event notification. It appears to be a largely self-contained vendor MIB relying mainly on standard SNMPv2-SMI/TRAP-TYPE conventions rather than deep dependency on other MIBs. It is deployed on Mimosa Networks point-to-point/point-to-multipoint wireless backhaul radios used in ISP and enterprise wireless access deployments.
IPNetwork Monitor allows you to monitor SNMP objects defined in MIMOSA-NETWORKS-BASE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- link speed change (old vs new)
- trap/event messages
- product identification
- hardware version
- software version
Supported Devices
- Mimosa Networks fixed-wireless/microwave backhaul radio (any generation, base identity)
Monitoring Examples
An administrator would subscribe to the trap carrying mimosaTrapMessage to receive free-text alerts about link or device events, and would compare mimosaOldSpeed against mimosaNewSpeed to detect an unexpected link speed downgrade on a Mimosa radio link. The mimosaProduct and mimosaHardware/mimosaSoftware branches would be polled to confirm which Mimosa model and firmware version is running on a given radio. A repeated mimosaNewSpeed drop relative to mimosaOldSpeed would reveal a degrading wireless link, prompting investigation of RF interference or alignment issues.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| mimosa | 1.3.6.1.4.1.43356 | Mimosa device MIB definitions | ||
| mimosaProduct | 1.3.6.1.4.1.43356.1 | |||
| mimosaHardware | 1.3.6.1.4.1.43356.1.1 | |||
| mimosaB5 | 1.3.6.1.4.1.43356.1.1.1 | |||
| mimosaB5Lite | 1.3.6.1.4.1.43356.1.1.2 | |||
| mimosaA5 | 1.3.6.1.4.1.43356.1.1.3 | |||
| mimosaC5 | 1.3.6.1.4.1.43356.1.1.4 | |||
| mimosaSoftware | 1.3.6.1.4.1.43356.1.2 | |||
| mimosaMgmt | 1.3.6.1.4.1.43356.2 | |||
| mimosaTrap | 1.3.6.1.4.1.43356.2.0 | |||
| NTF mimosaCriticalFault | 1.3.6.1.4.1.43356.2.0.1 | The mimosaCriticalFault notification is sent when the log manager in the Mimosa product determines that a fault with a critical severity has been detected. The mimosaCriticalFaultLog contains the description of the general error. | ||
| NTF mimosaTempWarning | 1.3.6.1.4.1.43356.2.0.2 | The mimosaTempWarning notification is sent when the log manager in the Mimosa product receives an indication that the temperature is outside the safe range. | ||
| NTF mimosaTempNormal | 1.3.6.1.4.1.43356.2.0.3 | The mimosaTempNormal notification is sent when the log manager in the Mimosa product receives an indication that the temperature is with in the safe range. | ||
| NTF mimosaEthernetSpeedChange | 1.3.6.1.4.1.43356.2.0.4 | The mimosaEthernetSpeedChange notification is sent when the log manager in the Mimosa product determines that a speed change on the Ethernet port was detected. The mimosaOldSpeed and mimosaNewSpeed indicates the speed in bits per second of the change. ifIndex is used per the ifTable in the IF-MIB. | ||
| mimosaMib | 1.3.6.1.4.1.43356.2.1 | |||
| mimosaTrapMib | 1.3.6.1.4.1.43356.2.1.1 | |||
| OCT mimosaTrapMessage | 1.3.6.1.4.1.43356.2.1.1.1 | OCTET STRING | read-only | General Octet String object to contain message sent with traps. |
| I32 mimosaOldSpeed | 1.3.6.1.4.1.43356.2.1.1.2 | Integer32 | read-only | The speed of the Ethernet link before the change within Ethernet Speed Change Notifications. |
| I32 mimosaNewSpeed | 1.3.6.1.4.1.43356.2.1.1.3 | Integer32 | read-only | The speed of the Ethernet link after the change within Ethernet Speed Change Notifications. |
| mimosaWireless | 1.3.6.1.4.1.43356.2.1.2 | |||
| mimosaMIBGroups | 1.3.6.1.4.1.43356.2.3 | |||
| mimosaTrapMIBGroup | 1.3.6.1.4.1.43356.2.3.1 | A collection of objects providing basic Trap function. | ||
| mimosaGenericNotificationsGroup | 1.3.6.1.4.1.43356.2.3.2 | The basic Trap notifications for all Mimosa products. | ||
| mimosaConformanceGroup | 1.3.6.1.4.1.43356.2.4 |
RFC description
Mimosa Networks vendor-private base MIB defining root OID structure and common management objects for Mimosa wireless devices.
Start monitoring Mimosa Networks fixed-wireless/microwave backhaul radio (any generation, base identity) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.