MY-AP-MIB

All MIBs › MY-AP-MIB

Organization: D-Link Crop.

Last Updated: 2002-03-20

Category: Wireless/WiFi

Description: Manages D-Link wireless access point configuration and client association status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MY-AP-MIB?

MY-AP-MIB is a vendor-specific MIB from D-Link managing "aggregate port" (link-aggregation/port-trunking) configuration on its managed switches — the sample objects (port config tables, member ports) confirm this is a trunking MIB rather than a Wi-Fi access-point MIB despite the name. It belongs to the Ethernet switching/port-trunking technology area of D-Link's switch product line. It exposes tables mapping physical ports to aggregate-port groups, including current/maximum aggregate-port counts, per-port aggregate membership, and objects for adding/removing member ports. Its monitoring value is confirming the software-level configuration status of link-aggregation groups — how many aggregate ports exist, which physical ports belong to which group, and pending membership changes — rather than physical hardware health. It depends on the base D-Link switch system MIB for overall device identity and is deployed on D-Link managed switches using link aggregation for higher-bandwidth uplinks. Network engineers evaluating or troubleshooting this functionality can download the MY-AP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MY-AP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link managed Ethernet switch

Monitoring Examples

An administrator would poll myApTable/myApEntry indexed by myApIndex to see myApMaxPtNumber and the current member-port list for each aggregate port group, and check myApPortConfigTable/myApPortConfigEntry (keyed by myApPortConfigPortIndex/myApPortConfigApIndex) to confirm which physical port maps to which aggregate group. The scalars myApMaxNumber and myApCurrentNumber show maximum vs. currently configured aggregate-port groups, while myApMemberAction and myApPossibleMember add or remove candidate ports from a group. A port unexpectedly missing from its expected aggregate group would explain reduced uplink bandwidth or a broken trunk.

What Can Be Monitored

aggregate port (link-aggregation) group membership
current vs. maximum aggregate port count
per-port aggregate group mapping
member port add/remove actions

Imported Objects

From MY-SMI

myMgmt

OBJECT-IDENTITY

From MY-TC

ConfigStatus
IfIndex
MemberMap

From P-BRIDGE-MIB

EnabledStatus

From Q-BRIDGE-MIB

PortList
VlanId

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
myApMIB	1.3.6.1.4.1.171.10.97.2.7			This module defines my aggreate port(AP) mibs.
myApMIBObjects	1.3.6.1.4.1.171.10.97.2.7.1
I32 myApMaxNumber	1.3.6.1.4.1.171.10.97.2.7.1.1	Integer32	read-only	Number of MAX aggreate ports this system supported.
I32 myApCurrentNumber	1.3.6.1.4.1.171.10.97.2.7.1.2	Integer32	read-only	Number of current aggreate ports this system have.
myApPortConfigTable	1.3.6.1.4.1.171.10.97.2.7.1.3		not-accessible	aggreate port table.
myApPortConfigEntry	1.3.6.1.4.1.171.10.97.2.7.1.3.1		not-accessible	list of aggreate port and it's port group table.
IFI myApPortConfigPortIndex	1.3.6.1.4.1.171.10.97.2.7.1.3.1.1	IfIndex	not-accessible
IFI myApPortConfigApIndex	1.3.6.1.4.1.171.10.97.2.7.1.3.1.2	IfIndex	read-write	Set this value to 1 �� myApMaxNumber indicate that add this value to that aggreate port which this aggreate port must be valid. It separates this port from aggreate port to set this value to 0
myApTable	1.3.6.1.4.1.171.10.97.2.7.1.4		not-accessible	Aggreate ports table.
myApEntry	1.3.6.1.4.1.171.10.97.2.7.1.4.1		not-accessible	list of aggreate ports and it's distribution table.
IFI myApIndex	1.3.6.1.4.1.171.10.97.2.7.1.4.1.1	IfIndex	read-only	aggreate ports index.
MEM myApMemberAction	1.3.6.1.4.1.171.10.97.2.7.1.4.1.2	MemberMap	read-only	Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggreate port. and 0 indicates the port is not in the aggreate port. this object can be modified only when the status of this entry is invalid.
MEM myApPossibleMember	1.3.6.1.4.1.171.10.97.2.7.1.4.1.3	MemberMap	read-only	Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect can be set in the aggreate port. and 0 indicates the port is not possible be set in the aggreate port.
I32 myApMaxPtNumber	1.3.6.1.4.1.171.10.97.2.7.1.4.1.4	Integer32	read-only	Max number of ports this aggreate port can include.
INT myApFlowBalance	1.3.6.1.4.1.171.10.97.2.7.1.5	INTEGER	read-write	Aggreate port's flow banlance arithmetic.
myApConfigTable	1.3.6.1.4.1.171.10.97.2.7.1.6		not-accessible	Aggreate ports table.
myApConfigEntry	1.3.6.1.4.1.171.10.97.2.7.1.6.1		not-accessible	list of aggreate ports and it's distribution table.
I32 myApConfigNumber	1.3.6.1.4.1.171.10.97.2.7.1.6.1.1	Integer32	read-create	aggreate ports number.Set this value to 1 �� myApMaxNumber.
IFI myApConfigIndex	1.3.6.1.4.1.171.10.97.2.7.1.6.1.2	IfIndex	read-only	aggreate ports index.
I32 myApConfigMaxPtNumber	1.3.6.1.4.1.171.10.97.2.7.1.6.1.3	Integer32	read-only	Number of MAX aggreate ports this system supported.
I32 myApConfigCurrentPtNumber	1.3.6.1.4.1.171.10.97.2.7.1.6.1.4	Integer32	read-only	Number of current ports this aggreate port have.
POR myApConfigPortMember	1.3.6.1.4.1.171.10.97.2.7.1.6.1.5	PortList	read-only	Each octet in this member action map assigned to a port, when the octet's value is 1 indicates the port of this octect is in the aggreate port. and 0 indicates the port is not in the aggreate port. this object can be modified only when the status of this entry is invalid.
I32 myApConfigAction	1.3.6.1.4.1.171.10.97.2.7.1.6.1.6	Integer32	read-write	The value 1 to add an aggreate port, 0 to delete an aggreate port.
myApPortMemberTable	1.3.6.1.4.1.171.10.97.2.7.1.7		not-accessible	aggreate port table.
myApPortMemberEntry	1.3.6.1.4.1.171.10.97.2.7.1.7.1		not-accessible	list of aggreate port and it's port group table.
IFI myApPortMemberPortIndex	1.3.6.1.4.1.171.10.97.2.7.1.7.1.1	IfIndex	read-only	a switch port index.
I32 myApPortMemberApNumber	1.3.6.1.4.1.171.10.97.2.7.1.7.1.2	Integer32	read-write	Set this value to 1 �� myApMaxNumber indicate that add this value to that aggreate port.
I32 myApPortMemberAction	1.3.6.1.4.1.171.10.97.2.7.1.7.1.3	Integer32	read-write	The value 1 indcate add to an aggreate port, 0 to delete from an aggreate port.
myApMIBConformance	1.3.6.1.4.1.171.10.97.2.7.2
myApMIBCompliances	1.3.6.1.4.1.171.10.97.2.7.2.1
myApMIBCompliance	1.3.6.1.4.1.171.10.97.2.7.2.1.1			The compliance statement for entities which implement the My Ap MIB
myApMIBGroups	1.3.6.1.4.1.171.10.97.2.7.2.2
myApMIBGroup	1.3.6.1.4.1.171.10.97.2.7.2.2.1			A collection of objects providing aggreate port configure.

RFC description

Manages aggregate port (link aggregation) configuration and status on D-Link switches.

Start monitoring D-Link managed Ethernet switch (link aggregation/port trunking) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MY-AP-MIB

What Is MY-AP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description