MERU-CONFIG-AP-MIB

All MIBs › MERU-CONFIG-AP-MIB

Organization: Meru Networks

Last Updated: 2005-06-05

Category: Wireless/WiFi

Description: Configures wireless access point radio and profile settings on Meru Networks controllers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MERU-CONFIG-AP-MIB?

MERU-CONFIG-AP-MIB is a vendor MIB from Meru Networks (a WLAN controller vendor later acquired by Fortinet) for configuring access point (AP) radio and profile settings within a Meru wireless LAN system. It falls into the configuration category of data, covering per-AP radio parameters and profile assignments pushed down from a central WLAN controller. It supports monitoring of the software/configuration status of managed APs, such as confirming an AP has correctly received its assigned RF profile and radio settings rather than reverting to defaults. It works alongside other Meru configuration and statistics MIBs (e.g., security, SNMP, global statistics) as part of the same controller-based management architecture rather than an IETF standard. It is typically deployed on Meru WLAN controllers managing fleets of enterprise access points, and administrators can download the MERU-CONFIG-AP-MIB file to load it into their controller management tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in MERU-CONFIG-AP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Meru Networks WLAN access points
Meru WLAN controllers

Monitoring Examples

No specific object or table names were available in the source excerpt for this MIB, but based on its stated purpose, an administrator would use it to verify that a given AP's radio channel, power, and profile assignment match the intended configuration, and would poll it after a bulk profile push to confirm no AP silently failed to apply its new RF settings.

What Can Be Monitored

AP radio configuration
AP profile assignment
radio channel/power settings

Imported Objects

From IPV6-TC

Ipv6Address

From MERU-SMI

mwConfiguration

OBJECT-IDENTITY

From MERU-TC

MwlAlarmState
MwlApDiscoveryState
MwlApHwType
MwlApIndoorOutdoorType
MwlApIpAssignmentType
MwlAvailabilityStatus
MwlCertRequestStatus
MwlCertificateStatus
MwlDiscoveryOrder
MwlEnableDisableOption
MwlLedMode
MwlOnOffSwitch
MwlOperationalState
MwlPowerSupply
MwlVpnAuthenticationStatus
MwlVpnAuthenticationType
MwlVpnConnectivityStatus
MwlVpnMode

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using mwApUpTime OID:

Select a Meru Networks WLAN access point (radio/profile configuration) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type mwApUpTime into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object describes Uptime. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a TimeTicks-type OID, Value bounds is the most useful condition here — trigger an alert if the value is unexpectedly low (e.g. under 10 minutes), since that indicates a recent, possibly unplanned, reboot or restart. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
mwConfigAp	1.3.6.1.4.1.15983.1.1.4.2			This MIB defines all the managed objects used to manage the Meru WLAN AP Configuration infrastructure
mwApTable	1.3.6.1.4.1.15983.1.1.4.2.1		not-accessible	This object describes AP Table
mwApEntry	1.3.6.1.4.1.15983.1.1.4.2.1.1		not-accessible	This object describes AP Table
I32 mwApTableIndex	1.3.6.1.4.1.15983.1.1.4.2.1.1.1	Integer32	not-accessible	The index value of the table
STR mwApDescr	1.3.6.1.4.1.15983.1.1.4.2.1.1.2	DisplayString	read-create	This object describes AP Name
STR mwApFloor	1.3.6.1.4.1.15983.1.1.4.2.1.1.3	DisplayString	read-create	This object describes Floor
U32 mwApNodeId	1.3.6.1.4.1.15983.1.1.4.2.1.1.4	Unsigned32	read-create	This object describes AP ID
STR mwApContact	1.3.6.1.4.1.15983.1.1.4.2.1.1.6	DisplayString	read-create	This object describes Contact
MWL mwApLedMode	1.3.6.1.4.1.15983.1.1.4.2.1.1.7	MwlLedMode	read-create	This object describes LED Mode
STR mwApLocation	1.3.6.1.4.1.15983.1.1.4.2.1.1.8	DisplayString	read-create	This object describes Location
STR mwApBuilding	1.3.6.1.4.1.15983.1.1.4.2.1.1.9	DisplayString	read-create	This object describes Building
U32 mwApParentId	1.3.6.1.4.1.15983.1.1.4.2.1.1.10	Unsigned32	read-create	This object describes Parent AP ID
STR mwApInitScript	1.3.6.1.4.1.15983.1.1.4.2.1.1.11	DisplayString	read-create	This object describes AP Init Script
MWL mwApEncryption	1.3.6.1.4.1.15983.1.1.4.2.1.1.12	MwlOnOffSwitch	read-create	This object describes Dataplane Encryption
MAC mwApSerialNumber	1.3.6.1.4.1.15983.1.1.4.2.1.1.13	MacAddress	read-create	This object describes Serial Number
MWL mwApIndoorOutdoor	1.3.6.1.4.1.15983.1.1.4.2.1.1.14	MwlApIndoorOutdoorType	read-create	This object describes AP Indoor/Outdoor type
U32 mwApLinkProbingDuration	1.3.6.1.4.1.15983.1.1.4.2.1.1.16	Unsigned32	read-create	This object describes Link Probing Duration
TIK mwApUpTimeEx	1.3.6.1.4.1.15983.1.1.4.2.1.1.17	TimeTicks	read-only	This object describes Uptime
STR mwApHwRev	1.3.6.1.4.1.15983.1.1.4.2.1.1.18	DisplayString	read-only	This object describes Hardware Revision
MWL mwApHwType	1.3.6.1.4.1.15983.1.1.4.2.1.1.19	MwlApHwType	read-only	This object describes AP Model
MAC mwApParentMac	1.3.6.1.4.1.15983.1.1.4.2.1.1.20	MacAddress	read-only	This object describes Parent MAC Address
MWL mwApAlarmState	1.3.6.1.4.1.15983.1.1.4.2.1.1.21	MwlAlarmState	read-only	This object describes Alarm State
STR mwApBootVersion	1.3.6.1.4.1.15983.1.1.4.2.1.1.22	DisplayString	read-only	This object describes Boot Image Version
STR mwApFPGAVersion	1.3.6.1.4.1.15983.1.1.4.2.1.1.23	DisplayString	read-only	This object describes FPGA Version
STR mwApRuntimeVersion	1.3.6.1.4.1.15983.1.1.4.2.1.1.24	DisplayString	read-only	This object describes Runtime Image Version
MWL mwApOperationalState	1.3.6.1.4.1.15983.1.1.4.2.1.1.26	MwlOperationalState	read-only	This object describes Operational State
MWL mwApAvailabilityStatus	1.3.6.1.4.1.15983.1.1.4.2.1.1.27	MwlAvailabilityStatus	read-only	This object describes Availability Status
MWL mwApRuntimeDiscoveryOrder	1.3.6.1.4.1.15983.1.1.4.2.1.1.28	MwlApDiscoveryState	read-only	This object describes Connectivity Layer
MWL mwApPowerSupplyType	1.3.6.1.4.1.15983.1.1.4.2.1.1.29	MwlPowerSupply	read-create	This object describes Power Supply Type
I32 mwApKeepAliveTimeout	1.3.6.1.4.1.15983.1.1.4.2.1.1.30	Integer32	read-create	This object describes KeepAlive Timeout(seconds)
ROW mwApRowStatus	1.3.6.1.4.1.15983.1.1.4.2.1.1.50	RowStatus	read-create	This object is used to create and delete rows in the table
mwAp2controllerMapTable	1.3.6.1.4.1.15983.1.1.4.2.2		not-accessible	This object describes Assignments of APs to Controllers
mwAp2controllerMapEntry	1.3.6.1.4.1.15983.1.1.4.2.2.1		not-accessible	This object describes Assignments of APs to Controllers
I32 mwAp2controllerMapTableIndex	1.3.6.1.4.1.15983.1.1.4.2.2.1.1	Integer32	not-accessible	The index value of the table
MAC mwAp2controllerMapApMac	1.3.6.1.4.1.15983.1.1.4.2.2.1.2	MacAddress	read-create	This object describes AP MAC Address
STR mwAp2controllerMapDestinationController	1.3.6.1.4.1.15983.1.1.4.2.2.1.3	DisplayString	read-create	This object describes Destination Controller
ROW mwAp2controllerMapRowStatus	1.3.6.1.4.1.15983.1.1.4.2.2.1.4	RowStatus	read-create	This object is used to create and delete rows in the table
mwApip2controllerMapTable	1.3.6.1.4.1.15983.1.1.4.2.3		not-accessible	This object describes Assignments of AP subnet to Controllers
mwApip2controllerMapEntry	1.3.6.1.4.1.15983.1.1.4.2.3.1		not-accessible	This object describes Assignments of AP subnet to Controllers
I32 mwApip2controllerMapTableIndex	1.3.6.1.4.1.15983.1.1.4.2.3.1.1	Integer32	not-accessible	The index value of the table
IP mwApip2controllerMapApSubnetIp	1.3.6.1.4.1.15983.1.1.4.2.3.1.2	IpAddress	read-create	This object describes AP IP Subnet
IP mwApip2controllerMapApSubnetMask	1.3.6.1.4.1.15983.1.1.4.2.3.1.3	IpAddress	read-create	This object describes AP Netmask
STR mwApip2controllerMapDestinationController	1.3.6.1.4.1.15983.1.1.4.2.3.1.4	DisplayString	read-create	This object describes Destination Controller
ROW mwApip2controllerMapRowStatus	1.3.6.1.4.1.15983.1.1.4.2.3.1.5	RowStatus	read-create	This object is used to create and delete rows in the table
mwApSwapTable	1.3.6.1.4.1.15983.1.1.4.2.4		not-accessible	This object describes AP Replacement Table
mwApSwapEntry	1.3.6.1.4.1.15983.1.1.4.2.4.1		not-accessible	This object describes AP Replacement Table
I32 mwApSwapTableIndex	1.3.6.1.4.1.15983.1.1.4.2.4.1.1	Integer32	not-accessible	The index value of the table
MAC mwApSwapNewApMac	1.3.6.1.4.1.15983.1.1.4.2.4.1.2	MacAddress	read-create	This object describes New AP MAC Address
MAC mwApSwapCurrentApMac	1.3.6.1.4.1.15983.1.1.4.2.4.1.3	MacAddress	read-create	This object describes AP MAC Address
ROW mwApSwapRowStatus	1.3.6.1.4.1.15983.1.1.4.2.4.1.4	RowStatus	read-create	This object is used to create and delete rows in the table
mwApConnectivityTable	1.3.6.1.4.1.15983.1.1.4.2.5		not-accessible	This object describes AP Network Connectivity configuration
mwApConnectivityEntry	1.3.6.1.4.1.15983.1.1.4.2.5.1		not-accessible	This object describes AP Network Connectivity configuration
I32 mwApConnectivityTableIndex	1.3.6.1.4.1.15983.1.1.4.2.5.1.1	Integer32	not-accessible	The index value of the table
IP mwApConnectivityWncIp	1.3.6.1.4.1.15983.1.1.4.2.5.1.2	IpAddress	read-write	This object describes Controller Address
STR mwApConnectivityHostName	1.3.6.1.4.1.15983.1.1.4.2.5.1.3	DisplayString	read-write	This object describes AP Host Name
IP mwApConnectivityPrimaryDns	1.3.6.1.4.1.15983.1.1.4.2.5.1.4	IpAddress	read-write	This object describes Primary DNS Server
STR mwApConnectivityWncHostName	1.3.6.1.4.1.15983.1.1.4.2.5.1.5	DisplayString	read-write	This object describes Controller Host Name
MWL mwApConnectivityAssignedType	1.3.6.1.4.1.15983.1.1.4.2.5.1.6	MwlApIpAssignmentType	read-write	This object describes IP Type
IP mwApConnectivitySecondaryDns	1.3.6.1.4.1.15983.1.1.4.2.5.1.7	IpAddress	read-write	This object describes Secondary DNS Server
STR mwApConnectivityWncDomainName	1.3.6.1.4.1.15983.1.1.4.2.5.1.8	DisplayString	read-write	This object describes Controller Domain Name
IP mwApConnectivityConfigureIpAddr	1.3.6.1.4.1.15983.1.1.4.2.5.1.9	IpAddress	read-write	This object describes Static IP Address
IP mwApConnectivityConfigureNetMask	1.3.6.1.4.1.15983.1.1.4.2.5.1.10	IpAddress	read-write	This object describes Static IP Netmask
IP mwApConnectivityConfigureGatewayAddr	1.3.6.1.4.1.15983.1.1.4.2.5.1.11	IpAddress	read-write	This object describes Static Default Gateway
MWL mwApConnectivityConfiguredDiscoveryOrder	1.3.6.1.4.1.15983.1.1.4.2.5.1.12	MwlDiscoveryOrder	read-write	This object describes Discovery Protocol
I32 mwApConnectivityNodeId	1.3.6.1.4.1.15983.1.1.4.2.5.1.13	Integer32	read-only	This object describes AP ID
STR mwApConnectivityNodeName	1.3.6.1.4.1.15983.1.1.4.2.5.1.14	DisplayString	read-only	This object describes AP Name
STR mwApConnectivityDomainName	1.3.6.1.4.1.15983.1.1.4.2.5.1.15	DisplayString	read-only	This object describes Domain Name
IP mwApConnectivityRuntimeDns1	1.3.6.1.4.1.15983.1.1.4.2.5.1.16	IpAddress	read-only	This object describes DNS Server 1
IP mwApConnectivityRuntimeDns2	1.3.6.1.4.1.15983.1.1.4.2.5.1.17	IpAddress	read-only	This object describes DNS Server 2
IP mwApConnectivityRuntimeDns3	1.3.6.1.4.1.15983.1.1.4.2.5.1.18	IpAddress	read-only	This object describes DNS Server 3
IP mwApConnectivityRuntimeDns4	1.3.6.1.4.1.15983.1.1.4.2.5.1.19	IpAddress	read-only	This object describes DNS Server 4
IP mwApConnectivityRuntimeDns5	1.3.6.1.4.1.15983.1.1.4.2.5.1.20	IpAddress	read-only	This object describes DNS Server 5
IP mwApConnectivityRuntimeDns6	1.3.6.1.4.1.15983.1.1.4.2.5.1.21	IpAddress	read-only	This object describes DNS Server 6
IP mwApConnectivityRuntimeDns7	1.3.6.1.4.1.15983.1.1.4.2.5.1.22	IpAddress	read-only	This object describes DNS Server 7
IP mwApConnectivityRuntimeDns8	1.3.6.1.4.1.15983.1.1.4.2.5.1.23	IpAddress	read-only	This object describes DNS Server 8
IP mwApConnectivityRuntimeIpAddr	1.3.6.1.4.1.15983.1.1.4.2.5.1.24	IpAddress	read-only	This object describes IP Address
IP mwApConnectivityRuntimeNetMask	1.3.6.1.4.1.15983.1.1.4.2.5.1.25	IpAddress	read-only	This object describes NetMask
IP mwApConnectivityRuntimeGatewayAddr	1.3.6.1.4.1.15983.1.1.4.2.5.1.26	IpAddress	read-only	This object describes Gateway
MWL mwApConnectivityRuntimeDiscoveryState	1.3.6.1.4.1.15983.1.1.4.2.5.1.27	MwlApDiscoveryState	read-only	This object describes Connectivity Layer
MWL mwApConnectivityVPNState	1.3.6.1.4.1.15983.1.1.4.2.5.1.28	MwlEnableDisableOption	read-only	This object describes VPN
MWL mwApConnectivityVPNAuthMethod	1.3.6.1.4.1.15983.1.1.4.2.5.1.29	MwlVpnAuthenticationType	read-only	This object describes VPN Authentication Method
IP mwApConnectivityWncTunnelIp	1.3.6.1.4.1.15983.1.1.4.2.5.1.30	IpAddress	read-only	This object describes Controller Tunnel IP Address
IP mwApConnectivityRuntimeTunnelIpAddr	1.3.6.1.4.1.15983.1.1.4.2.5.1.31	IpAddress	read-only	This object describes Tunnel IP
IP mwApConnectivityVpnServerIp	1.3.6.1.4.1.15983.1.1.4.2.5.1.32	IpAddress	read-only	This object describes VPN Server IP
STR mwApConnectivityVpnServerHostName	1.3.6.1.4.1.15983.1.1.4.2.5.1.33	DisplayString	read-only	This object describes VPN Server Host Name
U32 mwApConnectivityVpnServerPort	1.3.6.1.4.1.15983.1.1.4.2.5.1.34	Unsigned32	read-only	This object describes VPN Server Port
MWL mwApConnectivityVPNStatus	1.3.6.1.4.1.15983.1.1.4.2.5.1.35	MwlVpnMode	read-only	This object describes VPN Connectivity Mode
mwApCertificateTable	1.3.6.1.4.1.15983.1.1.4.2.6		not-accessible	This object describes AP Certificate configuration
mwApCertificateEntry	1.3.6.1.4.1.15983.1.1.4.2.6.1		not-accessible	This object describes AP Certificate configuration
I32 mwApCertificateTableIndex	1.3.6.1.4.1.15983.1.1.4.2.6.1.1	Integer32	not-accessible	The index value of the table
I32 mwApCertificateNodeId	1.3.6.1.4.1.15983.1.1.4.2.6.1.2	Integer32	read-only	This object describes AP ID
STR mwApCertificateNodeName	1.3.6.1.4.1.15983.1.1.4.2.6.1.3	DisplayString	read-only	This object describes AP Name
MAC mwApCertificateSerialNumber	1.3.6.1.4.1.15983.1.1.4.2.6.1.4	MacAddress	read-only	This object describes Serial Number
MWL mwApCertificateOperationalState	1.3.6.1.4.1.15983.1.1.4.2.6.1.5	MwlOperationalState	read-only	This object describes Operational State
MWL mwApCertificateAvailabilityStatus	1.3.6.1.4.1.15983.1.1.4.2.6.1.6	MwlAvailabilityStatus	read-only	This object describes Availability Status
MWL mwApCertificateStatus	1.3.6.1.4.1.15983.1.1.4.2.6.1.7	MwlCertificateStatus	read-only	This object describes Certificate Status
MWL mwApCertificateApCertReqStatus	1.3.6.1.4.1.15983.1.1.4.2.6.1.8	MwlCertRequestStatus	read-only	This object describes User Req Status
STR mwApCertificateCertificateAuthority	1.3.6.1.4.1.15983.1.1.4.2.6.1.9	DisplayString	read-only	This object describes CA
DAT mwApCertificateValidity	1.3.6.1.4.1.15983.1.1.4.2.6.1.10	DateAndTime	read-only	This object describes Validity (MM/DD/YYYY)
MWL mwApCertificateApHwType	1.3.6.1.4.1.15983.1.1.4.2.6.1.11	MwlApHwType	read-only	This object describes AP Model
ROW mwApCertificateRowStatus	1.3.6.1.4.1.15983.1.1.4.2.6.1.20	RowStatus	read-create	This object is used to create and delete rows in the table
mwApVpnClientInfoTable	1.3.6.1.4.1.15983.1.1.4.2.7		not-accessible	This object describes AP VPN Clients Info
mwApVpnClientInfoEntry	1.3.6.1.4.1.15983.1.1.4.2.7.1		not-accessible	This object describes AP VPN Clients Info
I32 mwApVpnClientInfoTableIndex	1.3.6.1.4.1.15983.1.1.4.2.7.1.1	Integer32	not-accessible	The index value of the table
I32 mwApVpnClientInfoNodeId	1.3.6.1.4.1.15983.1.1.4.2.7.1.2	Integer32	read-only	This object describes AP ID
STR mwApVpnClientInfoNodeName	1.3.6.1.4.1.15983.1.1.4.2.7.1.3	DisplayString	read-only	This object describes AP Name
MAC mwApVpnClientInfoApMac	1.3.6.1.4.1.15983.1.1.4.2.7.1.4	MacAddress	read-only	This object describes AP MAC
IP mwApVpnClientInfoTunnelIpAddr	1.3.6.1.4.1.15983.1.1.4.2.7.1.5	IpAddress	read-only	This object describes VPN IP Address
IP mwApVpnClientInfoRealIpAddr	1.3.6.1.4.1.15983.1.1.4.2.7.1.6	IpAddress	read-only	This object describes Real IP Address
MWL mwApVpnClientInfoVpnConnectivityStatus	1.3.6.1.4.1.15983.1.1.4.2.7.1.7	MwlVpnConnectivityStatus	read-only	This object describes VPN Connectivity Status
MWL mwApVpnClientInfoVpnAuthenticationStatus	1.3.6.1.4.1.15983.1.1.4.2.7.1.8	MwlVpnAuthenticationStatus	read-only	This object describes VPN Authentication Status

RFC description

Meru Networks proprietary MIB for managing wireless access point configuration objects, including AP tables and parameters used by the Meru WLAN management infrastructure.

Start monitoring Meru Networks WLAN access point (radio/profile configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MERU-CONFIG-AP-MIB