MIMOSA-NETWORKS-BFIVE-MIB

All MIBs › MIMOSA-NETWORKS-BFIVE-MIB

Organization: Mimosa Networks www.mimosa.co

Last Updated: 2016--1-0-

Category: Wireless/WiFi

Description: Monitors Mimosa B5 backhaul radio link performance and configuration objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MIMOSA-NETWORKS-BFIVE-MIB?

MIMOSA-NETWORKS-BFIVE-MIB is a vendor MIB for Mimosa Networks' B5 series point-to-point wireless backhaul radios, used to deliver high-capacity Ethernet links over unlicensed/licensed microwave spectrum. It exposes device identification and hardware environmental data such as firmware version/build date, last reboot time, internal temperature, and location (GPS longitude/latitude/altitude), alongside general/link/WAN information groups. It is explicitly useful for monitoring hardware health of the radio unit, particularly internal temperature (to catch overheating in outdoor enclosures) and last reboot time (to catch unexpected restarts), as well as confirming firmware version for fleet consistency. As a self-contained vendor MIB it doesn't appear to layer heavily on IETF standard MIBs, though it would typically coexist with IF-MIB for underlying Ethernet interface counters. It is deployed on Mimosa B5 outdoor point-to-point backhaul radio links in wireless ISP (WISP) and enterprise wireless backhaul deployments. Engineers can download the MIMOSA-NETWORKS-BFIVE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MIMOSA-NETWORKS-BFIVE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Mimosa Networks B5 point-to-point backhaul radios

Monitoring Examples

A WISP technician polls mimosaInternalTemp on a rooftop-mounted B5 radio to detect thermal stress during summer heat that could precede a hardware fault, and checks mimosaLastRebootTime to see if the unit rebooted unexpectedly overnight, suggesting a power or firmware issue. Comparing mimosaFirmwareVersion and mimosaFirmwareBuildDate across a fleet of radios flags units that are due for a firmware upgrade. mimosaLongitude/mimosaLatitude/mimosaAltitude confirm the radio's registered install location matches its physical deployment for link-planning purposes.

What Can Be Monitored

internal temperature
firmware version/build date
last reboot time
GPS location (lat/long/altitude)
device serial number

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From MIMOSA-NETWORKS-BASE-MIB

mimosaConformanceGroup	OBJECT-IDENTITY
mimosaWireless	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 mimosaAltitude	1.3.6.1.4.1.43356.2.1.2.2.3	Integer32	read-only	The Altitude of the Mimosa device location in meters.
I32 mimosaAntennaGain	1.3.6.1.4.1.43356.2.1.2.6.4	Integer32	read-only	The antenna gain on the Mimosa device.
mimosaB5Module	1.3.6.1.4.1.43356.2.4.1			Mimosa device MIB definitions
I32 mimosaCenterFreq	1.3.6.1.4.1.43356.2.1.2.6.1.1.6	Integer32	read-only	The center frequency for the given RF chain. A value of 0 means this particular Chain is not a valid entry.
I32 mimosaChain	1.3.6.1.4.1.43356.2.1.2.6.1.1.1	Integer32	not-accessible	An index which is used to access a particular entry in the chain table.
mimosaChainEntry	1.3.6.1.4.1.43356.2.1.2.6.1.1		not-accessible	An entry containing chain information applicable to a particular RF chain.
mimosaChainTable	1.3.6.1.4.1.43356.2.1.2.6.1		not-accessible	A list of RF chain entries, which is part of MIMO tables. MIMO stands for Multiple In Multiple Out.
I32 mimosaChannel	1.3.6.1.4.1.43356.2.1.2.6.3.1.1	Integer32	not-accessible	The index used to access a particular entry in the RF channel table.
I32 mimosaChannelCenterFreq	1.3.6.1.4.1.43356.2.1.2.6.3.1.5	Integer32	read-only	Specifies the center frequency of the channel used on the link. In all modes, the center frequency represents the absolute center of the selected channel width without any offset, and the center can be moved in 5 MHz increments. A value of 0 means this particular channel is not a valid entry.
mimosaChannelEntry	1.3.6.1.4.1.43356.2.1.2.6.3.1		not-accessible	The entry containing management information applicable to a particular channel.
INT mimosaChannelMode	1.3.6.1.4.1.43356.2.1.2.6.3.1.2	INTEGER	read-only	Specifies the mode for the given channel. The transmit or receive values indicate Frequency Diversity (FD) mode is in use. The bidirectional value means that the channel is used for both transmit and receive in all other single or dual channel modes.
mimosaChannelTable	1.3.6.1.4.1.43356.2.1.2.6.3		not-accessible	A list of RF channel entries on the Mimosa device.
I32 mimosaChannelTxPower	1.3.6.1.4.1.43356.2.1.2.6.3.1.4	Integer32	read-only	Specifies the transmit power level on the channel. If Channel Width is set to 1xN MHz, Channel 2 is not be used. In Frequency Diversity mode, Power 1 and Power 2 represent transmit power on the local and remote sides, respectively.
I32 mimosaChannelWidth	1.3.6.1.4.1.43356.2.1.2.6.3.1.3	Integer32	read-only	Specifies the channel width of the given channel.
DEC mimosaClockAccuracy	1.3.6.1.4.1.43356.2.1.2.2.8	DecimalTwo	read-only	Timing signal accuracy measured in parts per billion (PPB) by the Mimosa device. Display is in 2 decimal points.
I32 mimosaConsoleTimeout	1.3.6.1.4.1.43356.2.1.2.5.5	Integer32	read-only	The amount inactivity on the 2.4 GHz wireless interface before turning it off in Auto mode.
STR mimosaDeviceName	1.3.6.1.4.1.43356.2.1.2.1.1	DisplayString	read-only	The name of the local Mimosa device. This unique identifier could be the same as the sysName object.
STR mimosaFirmwareBuildDate	1.3.6.1.4.1.43356.2.1.2.1.4	DisplayString	read-only	The creation date of the currently installed and/or running firmware on the Mimosa device.
STR mimosaFirmwareVersion	1.3.6.1.4.1.43356.2.1.2.1.3	DisplayString	read-only	The version of the currently installed and/or running firmware on the Mimosa device.
INT mimosaFlowControl	1.3.6.1.4.1.43356.2.1.2.5.11	INTEGER	read-only	Specifies whether Flow Control is enabled on the Mimosa device.
mimosaGeneral	1.3.6.1.4.1.43356.2.1.2.1
I32 mimosaGlonassSatellites	1.3.6.1.4.1.43356.2.1.2.2.7	Integer32	read-only	Total number of GLONASS satellites detected.
I32 mimosaGPSSatellites	1.3.6.1.4.1.43356.2.1.2.2.6	Integer32	read-only	Total number of GPS satellites detected.
INT mimosaHttpsEnabled	1.3.6.1.4.1.43356.2.1.2.8.1	INTEGER	read-only	Specifies whether HTTPS is enabled on the Mimosa device.
DEC mimosaInternalTemp	1.3.6.1.4.1.43356.2.1.2.1.8	DecimalOne	read-only	The internal temperature of the Mimosa device.
STR mimosaLastRebootTime	1.3.6.1.4.1.43356.2.1.2.1.5	DisplayString	read-only	The last time the Mimosa device rebooted.
DEC mimosaLatitude	1.3.6.1.4.1.43356.2.1.2.2.2	DecimalFive	read-only	The Latitude of the Mimosa device location, in 5 decimal points.
INT mimosaLEDBrightness	1.3.6.1.4.1.43356.2.1.2.1.7	INTEGER	read-only	Indicates the intensity of the status indicator lights on the device exterior. The Auto option adjusts the amount of light based upon ambient conditions. Manual options include Low, Medium, and High.
I32 mimosaLocalChannel	1.3.6.1.4.1.43356.2.1.2.5.4	Integer32	read-only	The channel used for the local 2.4 GHz wireless interface.
IP mimosaLocalGateway	1.3.6.1.4.1.43356.2.1.2.5.10	IpAddress	read-only	The IP address of the gateway for the 2.4 GHz wireless link.
IP mimosaLocalIpAddr	1.3.6.1.4.1.43356.2.1.2.5.8	IpAddress	read-only	The IP address assigned to the 2.4 GHz wireless link.
PHY mimosaLocalMac	1.3.6.1.4.1.43356.2.1.2.5.7	PhysAddress	read-only	The MAC address used for 2.4 GHz wireless link.
IP mimosaLocalNetMask	1.3.6.1.4.1.43356.2.1.2.5.9	IpAddress	read-only	The IP netmask assigned to the 2.4 GHz wireless link.
STR mimosaLocalSsid	1.3.6.1.4.1.43356.2.1.2.5.3	DisplayString	read-only	The SSID for managing the local 2.4 GHz wireless interface.
mimosaLocInfo	1.3.6.1.4.1.43356.2.1.2.2
DEC mimosaLongitude	1.3.6.1.4.1.43356.2.1.2.2.1	DecimalFive	read-only	The Longitude of the Mimosa device location, in 5 decimal points.
I32 mimosaMaxClients	1.3.6.1.4.1.43356.2.1.2.5.6	Integer32	read-only	The maximum number of wireless clients that can simultaneously access the 2.4 GHz management interface.
INT mimosaMgmtCloudEnabled	1.3.6.1.4.1.43356.2.1.2.8.3	INTEGER	read-only	Specifies whether the Management Cloud is enabled on the Mimosa device.
mimosaMgmtInfo	1.3.6.1.4.1.43356.2.1.2.5
INT mimosaMgmtVlanEnabled	1.3.6.1.4.1.43356.2.1.2.8.2	INTEGER	read-only	Specifies whether the Management VLAN is enabled on the Mimosa device.
INT mimosaNetworkMode	1.3.6.1.4.1.43356.2.1.2.5.1	INTEGER	read-only	Specifies the mode for the local 2.4 GHz wireless network operation. If Auto is selected, the 2.4 GHz management network is turned on for a limited time (defined in Console Timeout ) after boot and then turned off if there is no activity. If a user associates with the radio within the timeout period, they will not be disconnected.
INT mimosaNtpMode	1.3.6.1.4.1.43356.2.1.2.8.7	INTEGER	read-only	Specifies whether the NTP client is configured to use standard servers from NIST, NTP organizations or custom NTP server.
STR mimosaNtpServer	1.3.6.1.4.1.43356.2.1.2.8.8	DisplayString	read-only	Specifies the name or address of the custom NTP server.
mimosaPerfInfo	1.3.6.1.4.1.43356.2.1.2.7
DEC mimosaPerRxRate	1.3.6.1.4.1.43356.2.1.2.7.4	DecimalTwo	read-only	The receive Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
DEC mimosaPerTxRate	1.3.6.1.4.1.43356.2.1.2.7.3	DecimalTwo	read-only	The trasnmit Packet Error Rate (PER) over a 5 second interval. It is caluculated as packets with errors versuss packets without errors.
DEC mimosaPhyRxRate	1.3.6.1.4.1.43356.2.1.2.7.2	DecimalTwo	read-only	The receive packet rate at the physical level over a 5 second interval.
DEC mimosaPhyTxRate	1.3.6.1.4.1.43356.2.1.2.7.1	DecimalTwo	read-only	The transmit packet rate at the physical level over a 5 second interval.
INT mimosaPingWatchdogEnabled	1.3.6.1.4.1.43356.2.1.2.8.5	INTEGER	read-only	Specifies whether the IP Ping watchdog is enabled on the Mimosa device. This is used to reset the device if a configured IP address is not reached in certain number of retries.
INT mimosaPolarization	1.3.6.1.4.1.43356.2.1.2.6.1.1.7	INTEGER	read-only	The ploarization of the given RF chain. It could be horizontal or vertical.
STR mimosaRecoverySsid	1.3.6.1.4.1.43356.2.1.2.5.2	DisplayString	read-only	The recovery SSID that allows the device to be reset to factory defaults. This is available for 10 minutes after device boot. Disabling the 2.4 GHz management network will not impact availability of this option. The serial number of the device must be known in order to perform the factory reset.
STR mimosaRegulatoryDomain	1.3.6.1.4.1.43356.2.1.2.1.9	DisplayString	read-only	The country in which the Mimosa device has been configured to run.
INT mimosaRestMgmtEnabled	1.3.6.1.4.1.43356.2.1.2.8.4	INTEGER	read-only	Specifies whether the REST management is enabled on the Mimosa device.
mimosaRfInfo	1.3.6.1.4.1.43356.2.1.2.6
I32 mimosaRxEVM	1.3.6.1.4.1.43356.2.1.2.6.2.1.8	Integer32	read-only	Specifies the receive Error Vector Magnitude (EVM) of the given data stream.
I32 mimosaRxMCS	1.3.6.1.4.1.43356.2.1.2.6.2.1.6	Integer32	read-only	Specifies the receive MCS of the given data stream. A value of -1 means this particular RxStream is not a valid entry.
I32 mimosaRxNoise	1.3.6.1.4.1.43356.2.1.2.6.1.1.4	Integer32	read-only	Specifies the received noise level for the given RF chain.
I32 mimosaRxPhy	1.3.6.1.4.1.43356.2.1.2.6.2.1.5	Integer32	read-only	Specifies the receive rate of the given data stream.
I32 mimosaRxPower	1.3.6.1.4.1.43356.2.1.2.6.1.1.3	Integer32	read-only	Specifies the receive power of the given RF chain. A value of -100 means this particular RxChain is not a valid entry (SNR must be -100).
I32 mimosaRxWidth	1.3.6.1.4.1.43356.2.1.2.6.2.1.7	Integer32	read-only	Specifies the receive Rx Width of the given data stream. A value of -1 means this particular RxWidth is not a valid entry.
DEC mimosaSatelliteSNR	1.3.6.1.4.1.43356.2.1.2.2.4	DecimalOne	read-only	The average Signal to Noise Ratio (SNR) amongst all of the satellites detected by the Mimosa device. Display is in 1 decimal point.
INT mimosaSatelliteStrength	1.3.6.1.4.1.43356.2.1.2.2.5	INTEGER	read-only	Strength of the satellites based on the number of satellites available. It is considered good if more than 2 satellites are available.
STR mimosaSerialNumber	1.3.6.1.4.1.43356.2.1.2.1.2	DisplayString	read-only	The unique serial number of the Mimosa device.
mimosaServices	1.3.6.1.4.1.43356.2.1.2.8
I32 mimosaSNR	1.3.6.1.4.1.43356.2.1.2.6.1.1.5	Integer32	read-only	Indicates the Signal to Noise Ratio (SNR) for the given RF chain. A value of -100 means this particular RxChain is not a valid entry.
I32 mimosaStream	1.3.6.1.4.1.43356.2.1.2.6.2.1.1	Integer32	not-accessible	The index used to access a particular entry in the stream table.
mimosaStreamEntry	1.3.6.1.4.1.43356.2.1.2.6.2.1		not-accessible	The entry containing information applicable to a particular stream.
mimosaStreamTable	1.3.6.1.4.1.43356.2.1.2.6.2		not-accessible	A list of data stream entries, which are part of MIMO tables. MIMO stands for Multiple In Multiple Out.
INT mimosaSyslogEnabled	1.3.6.1.4.1.43356.2.1.2.8.6	INTEGER	read-only	Specifies whether the Syslog client is enabled on the Mimosa device. Syslog client sends the log messages to configured syslog server.
I32 mimosaTargetSignalStrength	1.3.6.1.4.1.43356.2.1.2.6.7	Integer32	read-only	The calculated target receive signal strength based on device coordinates and settings.
mimosaTdmaInfo	1.3.6.1.4.1.43356.2.1.2.4
INT mimosaTDMAMode	1.3.6.1.4.1.43356.2.1.2.4.3	INTEGER	read-only	Specifies the TDMA Gender of the radio (A or B).
I32 mimosaTDMAWindow	1.3.6.1.4.1.43356.2.1.2.4.4	Integer32	read-only	Specifies the length of the transmit time slot in milliseconds.
DEC mimosaTotalRxPower	1.3.6.1.4.1.43356.2.1.2.6.6	DecimalOne	read-only	The total receive power for all the channels on the Mimosa device.
DEC mimosaTotalTxPower	1.3.6.1.4.1.43356.2.1.2.6.5	DecimalOne	read-only	The total transmit power for all the channels on the Mimosa device.
INT mimosaTrafficSplit	1.3.6.1.4.1.43356.2.1.2.4.5	INTEGER	read-only	The radio can be configured to allocate bandwidth symmetrically (50/50) or asymmetrically (75/25 or 25/75) in environments where traffic direction is expected to be heavier in one direction than the other. With an asymmetrical split, the local radio is represented first in the slash notation, (local/remote). For example, in the (75/25) split, the local radio gets 75, while the remote radio gets 25. If Auto is selected the radio will automatically determine, based upon traffic flow, which ratio will be used. The radio will continue to evaluate the flow and adjust accordingly.
I32 mimosaTxMCS	1.3.6.1.4.1.43356.2.1.2.6.2.1.3	Integer32	read-only	Specifies the transmit MCS of the given data stream. A value of -1 means this particular TxStream is not a valid entry.
I32 mimosaTxPhy	1.3.6.1.4.1.43356.2.1.2.6.2.1.2	Integer32	read-only	Specifies the transmit rate of the given data stream.
I32 mimosaTxPower	1.3.6.1.4.1.43356.2.1.2.6.1.1.2	Integer32	read-only	Specifies the transmit power of the given RF chain. A value of -8 means this particular TxChain is not a valid entry.
I32 mimosaTxWidth	1.3.6.1.4.1.43356.2.1.2.6.2.1.4	Integer32	read-only	Specifies the channel width based on MCS. A value of -1 means this particular TxWidth is not a valid entry
STR mimosaUnlockCode	1.3.6.1.4.1.43356.2.1.2.1.6	DisplayString	read-only	The code used to unlock the Mimosa device.
mimosaWanInfo	1.3.6.1.4.1.43356.2.1.2.3
PHY mimosaWanMac	1.3.6.1.4.1.43356.2.1.2.3.2	PhysAddress	read-only	The MAC address used for the wireless link.
STR mimosaWanSsid	1.3.6.1.4.1.43356.2.1.2.3.1	DisplayString	read-only	The wireless link name used by both radios. Both AP and Station must use the same SSID to communicate with each other.
INT mimosaWanStatus	1.3.6.1.4.1.43356.2.1.2.3.3	INTEGER	read-only	The wireless link status between the Mimosa devices.
TIK mimosaWanUpTime	1.3.6.1.4.1.43356.2.1.2.3.4	TimeTicks	read-only	The wireless link up time since last reboot.
INT mimosaWirelessMode	1.3.6.1.4.1.43356.2.1.2.4.1	INTEGER	read-only	Describes wherger the Mimosa device acts as an access point or station.
INT mimosaWirelessProtocol	1.3.6.1.4.1.43356.2.1.2.4.2	INTEGER	read-only	Describes the wireless protocol configured on the Mimosa device. Both TDMA and CSMA are supported. TDMA is a deterministic protocol where each device is assigned a time slot during which it is allowed to transmit. This allows for collocated radios to utilize the same channel and avoid Tx/Rx collisions and interference.

RFC description

Mimosa B5 wireless device MIB defining RF, performance, and service management objects for point-to-point links.

Start monitoring Mimosa Networks B5 point-to-point backhaul radio with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MIMOSA-NETWORKS-BFIVE-MIB

What Is MIMOSA-NETWORKS-BFIVE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description