ME1200-SYSUTIL-MIB

All MIBs › ME1200-SYSUTIL-MIB

Organization: Cisco Systems, Inc

Last Updated: 2017--0-7-

Category: Switch Management

Description: Monitors system CPU, memory utilization, and reboot information on Cisco ME1200 switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-SYSUTIL-MIB?

This is a Cisco private MIB for the ME1200 Metro Ethernet switch providing system utilization and capability data, similar in spirit to a vendor system-health MIB. It exposes platform capability flags (warm reboot, POST, ZTP, stack firmware check support), configurable monitoring thresholds and modes for memory and CPU load, and real-time CPU load averages over multiple intervals (100ms, 1s, 10s, 1min, 5min). This MIB is explicitly a hardware/software status monitoring tool: CPU load averages across several time windows let an operator distinguish a brief spike from sustained high load, and the memory pool notification threshold configuration governs when the switch itself will alert on memory pressure. It is a self-contained Cisco private MIB, typically used alongside ME1200-LLDP-MIB and ME1200-HQOS-MIB for full platform visibility rather than any IETF standard. It is deployed on ME1200 switches in metro access deployments where operators need to catch CPU or memory exhaustion before it causes service-affecting instability. Network engineers evaluating or troubleshooting this functionality can download the ME1200-SYSUTIL-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-SYSUTIL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME1200 Metro Ethernet switch

Monitoring Examples

An operator would poll me1200SysutilStatusCpuLoadAverage1min and me1200SysutilStatusCpuLoadAverage5min to distinguish a transient CPU spike (visible only in the 100msec/1sec averages) from sustained high load requiring investigation. me1200SysutilConfigSystemMemoryPoolNotifThreshold would be tuned so the switch proactively reports memory pressure before an out-of-memory condition affects forwarding. me1200SysutilCapabilitiesWarmRebootSupported and PostSupported flags would be checked to confirm platform capabilities before scheduling a maintenance reboot.

What Can Be Monitored

CPU load average (100ms/1s/10s/1min/5min)
memory pool utilization notification threshold
warm reboot and POST support
CPU load monitoring mode/interval configuration

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200DisplayString
ME1200Unsigned8

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200SysutilMib	1.3.6.1.4.1.9.9.815.1.24			This is a private version of SysUtil
me1200SysutilMibObjects	1.3.6.1.4.1.9.9.815.1.24.1
me1200SysutilCapabilities	1.3.6.1.4.1.9.9.815.1.24.1.1
T/F me1200SysutilCapabilitiesWarmRebootSupported	1.3.6.1.4.1.9.9.815.1.24.1.1.1	TruthValue	read-only	Indicate if warm restart is supported or not. true(1) means it is supported. false(2) means it is not supported.
T/F me1200SysutilCapabilitiesPostSupported	1.3.6.1.4.1.9.9.815.1.24.1.1.2	TruthValue	read-only	Indicate if POST(Power On Self Test) is supported or not. true(1) means it is supported. false(2) means it is not supported.
T/F me1200SysutilCapabilitiesZtpSupported	1.3.6.1.4.1.9.9.815.1.24.1.1.3	TruthValue	read-only	Indicate if ZTP(Zero Touch Provisioning) is supported or not. true(1) means it is supported. false(2) means it is not supported.
T/F me1200SysutilCapabilitiesStackFwChkSupported	1.3.6.1.4.1.9.9.815.1.24.1.1.4	TruthValue	read-only	Indicate if stack firmware version check is supported or not. true(1) means it is supported. false(2) means it is not supported.
me1200SysutilConfig	1.3.6.1.4.1.9.9.815.1.24.1.2
me1200SysutilConfigSystemMemoryPool	1.3.6.1.4.1.9.9.815.1.24.1.2.1
U32 me1200SysutilConfigSystemMemoryPoolNotifThreshold	1.3.6.1.4.1.9.9.815.1.24.1.2.1.1	Unsigned32	read-write	The threshold value in percentage of free memory remaining in a memory pool.A SNMP notification is sent when the free memory available goes below this threshold value.
me1200SysutilConfigSystemCpuLoad	1.3.6.1.4.1.9.9.815.1.24.1.2.2
ME1 me1200SysutilConfigSystemCpuLoadMonitoringMode	1.3.6.1.4.1.9.9.815.1.24.1.2.2.1	ME1200Unsigned8	read-write	The mode of system CPU load monitoring. If the mode is enabled, a SNMP notification is sent when the CPU load is over the average value in one minute, five minutes or fifteen minutes.
U32 me1200SysutilConfigSystemCpuLoadMonitoringInterval	1.3.6.1.4.1.9.9.815.1.24.1.2.2.2	Unsigned32	read-write	The interval value in senconds of CPU load monitoring.
me1200SysutilStatus	1.3.6.1.4.1.9.9.815.1.24.1.3
me1200SysutilStatusCpuLoad	1.3.6.1.4.1.9.9.815.1.24.1.3.1
U32 me1200SysutilStatusCpuLoadAverage100msec	1.3.6.1.4.1.9.9.815.1.24.1.3.1.1	Unsigned32	read-only	Average CPU load (%) in 100 milli-seconds.
U32 me1200SysutilStatusCpuLoadAverage1sec	1.3.6.1.4.1.9.9.815.1.24.1.3.1.2	Unsigned32	read-only	Average CPU load (%) in 1 second.
U32 me1200SysutilStatusCpuLoadAverage10sec	1.3.6.1.4.1.9.9.815.1.24.1.3.1.3	Unsigned32	read-only	Average CPU load (%) in 10 seconds.
U32 me1200SysutilStatusCpuLoadAverage1min	1.3.6.1.4.1.9.9.815.1.24.1.3.1.4	Unsigned32	read-only	Average CPU load (%) in 1 minute.
U32 me1200SysutilStatusCpuLoadAverage5min	1.3.6.1.4.1.9.9.815.1.24.1.3.1.5	Unsigned32	read-only	Average CPU load (%) in 5 minutes.
U32 me1200SysutilStatusCpuLoadAverage15min	1.3.6.1.4.1.9.9.815.1.24.1.3.1.6	Unsigned32	read-only	Average CPU load (%) in 15 minutes.
me1200SysutilStatusPowerSupplyTable	1.3.6.1.4.1.9.9.815.1.24.1.3.2		not-accessible	Table of power supply status.
me1200SysutilStatusPowerSupplyEntry	1.3.6.1.4.1.9.9.815.1.24.1.3.2.1		not-accessible	Each row contains the power supply status.
I32 me1200SysutilStatusPowerSupplySwitchId	1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.1	Integer32	not-accessible	The identification of switch.
I32 me1200SysutilStatusPowerSupplyPsuId	1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.2	Integer32	not-accessible	The identification of power supply.
ME1 me1200SysutilStatusPowerSupplyState	1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.3	ME1200SysutilPowerSupplyStateType	read-only	The state of power supply.
STR me1200SysutilStatusPowerSupplyDescription	1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.4	ME1200DisplayString	read-only	The description of power supply.
STR me1200SysutilVoltageStatus	1.3.6.1.4.1.9.9.815.1.24.1.3.2.1.5	ME1200DisplayString	read-only	Status of differnt system voltages.
me1200SysutilStatusSystemLedTable	1.3.6.1.4.1.9.9.815.1.24.1.3.3		not-accessible	Table of system LED status.
me1200SysutilStatusSystemLedEntry	1.3.6.1.4.1.9.9.815.1.24.1.3.3.1		not-accessible	Each row contains the system LED status.
I32 me1200SysutilStatusSystemLedSwitchId	1.3.6.1.4.1.9.9.815.1.24.1.3.3.1.1	Integer32	not-accessible	The identification of switch.
STR me1200SysutilStatusSystemLedDescription	1.3.6.1.4.1.9.9.815.1.24.1.3.3.1.2	ME1200DisplayString	read-only	The description of system LED status.
me1200SysutilStatusSystemMemoryPool	1.3.6.1.4.1.9.9.815.1.24.1.3.4
U32 me1200SysutilStatusSystemMemoryPoolValid	1.3.6.1.4.1.9.9.815.1.24.1.3.4.1	Unsigned32	read-only	The total memory size in kilobytes that is valid for the system.
U32 me1200SysutilStatusSystemMemoryPoolUsed	1.3.6.1.4.1.9.9.815.1.24.1.3.4.2	Unsigned32	read-only	The memory size in kilobytes that is currently in use by the applications.
U32 me1200SysutilStatusSystemMemoryPoolFree	1.3.6.1.4.1.9.9.815.1.24.1.3.4.3	Unsigned32	read-only	The memory size in kilobytes that is currently unsed by the applications.
me1200SysutilControl	1.3.6.1.4.1.9.9.815.1.24.1.4
me1200SysutilControlRebootTable	1.3.6.1.4.1.9.9.815.1.24.1.4.1		not-accessible	This is a table to reboot a swicth
me1200SysutilControlRebootEntry	1.3.6.1.4.1.9.9.815.1.24.1.4.1.1		not-accessible	Each switch has a set of parameters
I32 me1200SysutilControlRebootSwitchId	1.3.6.1.4.1.9.9.815.1.24.1.4.1.1.1	Integer32	not-accessible	The identification of switch.
ME1 me1200SysutilControlRebootType	1.3.6.1.4.1.9.9.815.1.24.1.4.1.1.2	ME1200SysutilRebootType	read-write	Type of reboot. noReboot(0) does not reboot. coldReboot(1) is to do cold reboot. warmReboot(2) is to do warm reboot, but this is optional. The OID of vtssSysutilCapabilitiesWarmRebootSupported tells if warm reboot is supported or not.
me1200SysutilControlSystemLedTable	1.3.6.1.4.1.9.9.815.1.24.1.4.2		not-accessible	This is a table to clear the system LED error status
me1200SysutilControlSystemLedEntry	1.3.6.1.4.1.9.9.815.1.24.1.4.2.1		not-accessible	Each switch has a set of parameters
I32 me1200SysutilControlSystemLedSwitchId	1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.1	Integer32	not-accessible	The identification of switch.
ME1 me1200SysutilControlSystemLedClearStatus	1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.2	ME1200SysutilSystemLedClearType	read-write	Type of system LED status clearing.all(0) is used to clear all error status of the system LED and back to normal indication. fatal(1) is used to clear fatal error status of the system LED. software(2) is used to clear generic software error status of the system LED. post(3) is used to clear POST(Power On Self Test) error status of the system LED. ztp(4) is used to clear ZTP(Zero Touch Provisioning) error status of the system LED. stackFwChk(5) is used to clear stack firmware version check error status of the system LED.
me1200SysutilNotificationPrefix	1.3.6.1.4.1.9.9.815.1.24.1.5
me1200SysutilNotification	1.3.6.1.4.1.9.9.815.1.24.1.5.0
NTF me1200SysutilNotificationPowerSupplyStateChange	1.3.6.1.4.1.9.9.815.1.24.1.5.0.1			Notification is sent if a power supply change state.
NTF me1200SysutilNotificationReboot	1.3.6.1.4.1.9.9.815.1.24.1.5.0.2			Notification is sent when the device is rebooted by the user interface demand from CLI, Web or SNMP.
NTF me1200SysutilNotificationMemoryPoolLowMemory	1.3.6.1.4.1.9.9.815.1.24.1.5.0.3			Notification is sent when the free memory available goes below the value of system memory pool notification threshold.
NTF me1200SysutilNotificationMemoryPoolLowMemoryRecovery	1.3.6.1.4.1.9.9.815.1.24.1.5.0.4			Notification is sent when the free memory available recovery above the value of system memory pool notification threshold after the low memory event occurred.
NTF me1200SysutilNotificationCpuLoadOverAverage1min	1.3.6.1.4.1.9.9.815.1.24.1.5.0.5			Notification is sent when the CPU load is over the average value in one minute.
NTF me1200SysutilNotificationCpuLoadOverAverage5min	1.3.6.1.4.1.9.9.815.1.24.1.5.0.6			Notification is sent when the CPU load is over the average value in five minutes.
NTF me1200SysutilNotificationCpuLoadOverAverage15min	1.3.6.1.4.1.9.9.815.1.24.1.5.0.7			Notification is sent when the CPU load is over the average value in fifteen minutes.
NTF me1200SysutilNotificationVoltageFailure	1.3.6.1.4.1.9.9.815.1.24.1.5.0.8			Notification is sent when different system voltages are out of range.
me1200SysutilMibConformance	1.3.6.1.4.1.9.9.815.1.24.2
me1200SysutilMibCompliances	1.3.6.1.4.1.9.9.815.1.24.2.1
me1200SysutilMibCompliance	1.3.6.1.4.1.9.9.815.1.24.2.1.1			The compliance statement for the implementation.
me1200SysutilMibGroups	1.3.6.1.4.1.9.9.815.1.24.2.2
me1200SysutilCapabilitiesInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.1			A collection of objects suitable for bulk operations.
me1200SysutilConfigSystemMemoryPoolInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.2			A collection of objects suitable for bulk operations.
me1200SysutilConfigSystemCpuLoadInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.3			A collection of objects suitable for bulk operations.
me1200SysutilStatusCpuLoadInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.4			A collection of objects suitable for bulk operations.
me1200SysutilStatusPowerSupplyInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.5			A collection of objects suitable for bulk operations.
me1200SysutilStatusSystemLedInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.6			A collection of objects suitable for bulk operations.
me1200SysutilStatusSystemMemoryPoolInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.7			A collection of objects suitable for bulk operations.
me1200SysutilControlRebootInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.8			A collection of objects suitable for bulk operations.
me1200SysutilControlSystemLedInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.9			A collection of objects suitable for bulk operations.
me1200SysutilNotificationInfoGroup	1.3.6.1.4.1.9.9.815.1.24.2.2.10			A collection of objects suitable for bulk operations.

RFC description

Vendor-private MIB for Microchip/Vitesse (formerly Marvell/Microsemi) ME1200 switch platform system utilities, providing CPU, memory, and system resource monitoring objects.

Start monitoring Cisco Metro Ethernet switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-SYSUTIL-MIB

What Is ME1200-SYSUTIL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description