All MIBs › ME1200-SYSUTIL-MIB › me1200SysutilControlSystemLedClearStatus
me1200SysutilControlSystemLedClearStatus
Module: ME1200-SYSUTIL-MIB
OID (symbolic): ME1200-SYSUTIL-MIB::me1200SysutilControlSystemLedClearStatus
OID (numeric): 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.2
Node type: OBJECT-TYPE
Type: ME1200SysutilSystemLedClearType
Access: read-write
Description: Type of system LED status clearing.all(0) is used to clear all error status of the system LED and back to normal indication. fatal(1) is used to clear fatal error status of the system LED. software(2) is used to clear generic software error status of the system LED. post(3) is used to clear POST(Power On Self Test) error status of the system LED. ztp(4) is used to clear ZTP(Zero Touch Provisioning) error status of the system LED. stackFwChk(5) is used to clear stack firmware version check error status of the system LED.
What is me1200SysutilControlSystemLedClearStatus?
Write-only per-switch control to clear system LED error indications by category: all(0), fatal(1), software(2), post(3), ztp(4), or stackFwChk(5). After resolving a POST failure, an admin would set this to post(3) to clear just that LED indication without touching other error states.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.2 snmpwalk -v2c -c public <target> ME1200-SYSUTIL-MIB::me1200SysutilControlSystemLedClearStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.2.1 snmpget -v2c -c public <target> ME1200-SYSUTIL-MIB::me1200SysutilControlSystemLedClearStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.2.1 s <value>
Start monitoring Cisco Metro Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-SYSUTIL-MIB::me1200SysutilControlSystemLedClearStatus OID value, configure state conditions and alerts, and monitor any Cisco Metro Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.24 | me1200SysutilMib | ME1200-SYSUTIL-MIB |
| 1.3.6.1.4.1.9.9.815.1.24.1 | me1200SysutilMibObjects | ME1200-SYSUTIL-MIB |
| 1.3.6.1.4.1.9.9.815.1.24.1.4 | me1200SysutilControl | ME1200-SYSUTIL-MIB |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.2 | me1200SysutilControlSystemLedTable | ME1200-SYSUTIL-MIB |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1 | me1200SysutilControlSystemLedEntry | ME1200-SYSUTIL-MIB |
| 1.3.6.1.4.1.9.9.815.1.24.1.4.2.1.2 | me1200SysutilControlSystemLedClearStatus | ME1200-SYSUTIL-MIB |