ME1200-SYSLOG-MIB

All MIBs › ME1200-SYSLOG-MIB

Organization: Cisco Systems, Inc

Last Updated: 2014-03-25

Category: Network Management

Description: Manages syslog message collection and server settings on Cisco ME1200 switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-SYSLOG-MIB?

ME1200-SYSLOG-MIB is a Cisco proprietary module for the ME1200 Metro Ethernet switch family, managing syslog message collection, server configuration, and local message history. It exposes syslog server mode/address/level configuration along with status and control history tables recording individual log messages, their severity level, timestamp, and text, indexed per switch in a stack. Its monitoring value is primarily software/event status: administrators can confirm the syslog server is correctly configured and reachable, and review the device's own historical log messages to detect recurring errors, warnings, or operational events. It builds on the standard syslog protocol/message-severity model (RFC 5424-style levels) for its message classification. It is typically deployed on Cisco ME1200 switches in metro Ethernet networks where centralized logging and local log review are both required for operational visibility. Engineers can download the ME1200-SYSLOG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-SYSLOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME1200 Metro Ethernet switch

Monitoring Examples

An administrator would poll me1200SyslogConfigServerMode/Address/Level to confirm the syslog server destination is correctly configured, then review me1200SyslogStatusHistoryTable/Entry for me1200SyslogStatusHistoryMsgLevel and me1200SyslogStatusHistoryMsgText to see recent log messages per switch unit. A cluster of high-severity me1200SyslogStatusHistoryMsgLevel entries around the same me1200SyslogStatusHistoryMsgTimeStamp would reveal a correlated fault event across the stack worth investigating.

What Can Be Monitored

syslog server configuration (mode/address/level)
local log message history
log message severity level
log message timestamp and text
per-switch-unit log identification

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200DisplayString
ME1200InetAddress

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200SyslogMib	1.3.6.1.4.1.9.9.815.1.37			This is a private MIB for Syslog
me1200SyslogMibObjects	1.3.6.1.4.1.9.9.815.1.37.1
me1200SyslogConfig	1.3.6.1.4.1.9.9.815.1.37.1.2
me1200SyslogConfigServer	1.3.6.1.4.1.9.9.815.1.37.1.2.1
T/F me1200SyslogConfigServerMode	1.3.6.1.4.1.9.9.815.1.37.1.2.1.1	TruthValue	read-write	Indicates the syslog server mode operation. When the mode operation is enabled, the syslog message will send out to syslog server.
ADR me1200SyslogConfigServerAddress	1.3.6.1.4.1.9.9.815.1.37.1.2.1.2	ME1200InetAddress	read-write	The domain name of syslog server.
ME1 me1200SyslogConfigServerLevel	1.3.6.1.4.1.9.9.815.1.37.1.2.1.3	ME1200SyslogLevelType	read-write	Indicates what level of message will send to syslog server. For example, the error level will send the specific messages which severity code is less or equal than error(3), the warning level will send the specific messages which severity code is less or equal than warning(4), the notice level will send the specific messages which severity code is less or equal than notice(5), the informational level will send the specific messages which severity code is less or equal than informational(6) and the enumeration option of all(8) isn't used in this case.
me1200SyslogStatus	1.3.6.1.4.1.9.9.815.1.37.1.3
me1200SyslogStatusHistoryTable	1.3.6.1.4.1.9.9.815.1.37.1.3.1		not-accessible	The syslog history table.
me1200SyslogStatusHistoryEntry	1.3.6.1.4.1.9.9.815.1.37.1.3.1.1		not-accessible	Each row contains a set of parameters.
I32 me1200SyslogStatusHistorySwitchId	1.3.6.1.4.1.9.9.815.1.37.1.3.1.1.1	Integer32	not-accessible	The identification of switch. For non-stackable switch, the valid value is limited to 1.
I32 me1200SyslogStatusHistoryMsgId	1.3.6.1.4.1.9.9.815.1.37.1.3.1.1.2	Integer32	not-accessible	The identification of Syslog message.
ME1 me1200SyslogStatusHistoryMsgLevel	1.3.6.1.4.1.9.9.815.1.37.1.3.1.1.3	ME1200SyslogLevelType	read-only	The severity level of the system log message. Note that enumeration option of all(8) isn't used in this case.
DAT me1200SyslogStatusHistoryMsgTimeStamp	1.3.6.1.4.1.9.9.815.1.37.1.3.1.1.4	DateAndTime	read-only	The value of sysUpTime when this message was generated.
STR me1200SyslogStatusHistoryMsgText	1.3.6.1.4.1.9.9.815.1.37.1.3.1.1.5	ME1200DisplayString	read-only	The detailed context of the system log message.
me1200SyslogControl	1.3.6.1.4.1.9.9.815.1.37.1.4
me1200SyslogControlHistoryTable	1.3.6.1.4.1.9.9.815.1.37.1.4.1		not-accessible	The syslog history clear table.
me1200SyslogControlHistoryEntry	1.3.6.1.4.1.9.9.815.1.37.1.4.1.1		not-accessible	Each row contains a set of parameters.
I32 me1200SyslogControlHistorySwitchId	1.3.6.1.4.1.9.9.815.1.37.1.4.1.1.1	Integer32	not-accessible	The identification of switch. For non-stackable switch, the valid value is limited to 1. For stackable switch, value 0 means the action is applied to all switches.
ME1 me1200SyslogControlHistoryClearLevel	1.3.6.1.4.1.9.9.815.1.37.1.4.1.1.2	ME1200SyslogLevelType	not-accessible	Indicates which level of message want to clear.
T/F me1200SyslogControlHistoryClear	1.3.6.1.4.1.9.9.815.1.37.1.4.1.1.3	TruthValue	read-write	Clear syslog history by setting to true.
me1200SyslogMibConformance	1.3.6.1.4.1.9.9.815.1.37.2
me1200SyslogMibCompliances	1.3.6.1.4.1.9.9.815.1.37.2.1
me1200SyslogMibCompliance	1.3.6.1.4.1.9.9.815.1.37.2.1.1			The compliance statement for the implementation.
me1200SyslogMibGroups	1.3.6.1.4.1.9.9.815.1.37.2.2
me1200SyslogConfigServerInfoGroup	1.3.6.1.4.1.9.9.815.1.37.2.2.1			A collection of objects suitable for bulk operations.
me1200SyslogStatusHistoryTableInfoGroup	1.3.6.1.4.1.9.9.815.1.37.2.2.2			A collection of objects suitable for bulk operations.
me1200SyslogControlHistoryTableInfoGroup	1.3.6.1.4.1.9.9.815.1.37.2.2.3			A collection of objects suitable for bulk operations.

RFC description

Cisco ME1200 private MIB for syslog management and configuration with server-based logging capabilities.

Start monitoring Cisco ME1200 Metro Ethernet switch (syslog server/message history) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-SYSLOG-MIB

What Is ME1200-SYSLOG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description