MEDIAHAWK-MIB

All MIBs › MEDIAHAWK-MIB

Category: Network Management

Description: Monitors MediaHawk media surveillance and recording system status and events.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MEDIAHAWK-MIB?

MEDIAHAWK-MIB is an enterprise MIB from Concurrent Computer Corporation for the MediaHawk video server, a media recording and surveillance/broadcast storage system. It exposes data about individual recorded video assets, including file size, number of copies, number of open handles, content storage space, and index space consumption. It is used to monitor the software and storage health of the video server: a video status showing an error, an index or content space nearing capacity, or an unexpectedly high open-file count are direct indicators of a recording or storage problem needing attention. It is a standalone enterprise MIB registered under Concurrent Computer Corporation's OID branch with no evident dependency on other vendor or standards MIBs. It is deployed on broadcast, surveillance, or video-on-demand server appliances that continuously record and archive live video streams. Engineers can download the MEDIAHAWK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MEDIAHAWK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MediaHawk video server appliance

Monitoring Examples

Walking mhvsVPVideoTable indexed by mhvsVPVideoIndex reads mhvsVPVideoName, mhvsVPVideoStatus, and mhvsVPVideoSize together with mhvsVPVideoContentSpace and mhvsVPVideoIndexSpace. A video entry stuck in an error status, or index space approaching capacity, signals a recording or storage problem. mhvsVPVideoNumOpen and mhvsVPVideoNumCopies show how many processes currently reference that video asset.

What Can Be Monitored

per-video recording status
video file size
content storage space used
index space used
number of open video handles
number of video copies

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

From SNMPv2-TC

DateAndTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
concurrentComputerCorporation	1.3.6.1.4.1.1457
NTF mhvsVPStreamChangedStatus	1.3.6.1.4.1.1457.0.50			Trap is issued when a stream is opened or closed or changes state depending on the setting of mhvsVPStreamsTrapGeneration. The trap contains the new state of the stream ('unknown' if closed)
NTF mhvsVPResourcesSPChangedStatus	1.3.6.1.4.1.1457.0.51			Trap is issued when a Service Provider changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the SP and includes its new state
NTF mhvsVPResourcesVPChangedStatus	1.3.6.1.4.1.1457.0.52			Trap is issued when a Video Pump changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the VP and includes its new state
NTF mhvsVPResourcesDiskChangedStatus	1.3.6.1.4.1.1457.0.53			Trap is issued when a Disk Resource changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Disk and includes its new state
NTF mhvsVPResourcesDiskAttChangedStatus	1.3.6.1.4.1.1457.0.54			Trap is issued when a Disk Attachment changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Disk Attachment and includes its new state
NTF mhvsVPResourcesNetwChangedStatus	1.3.6.1.4.1.1457.0.55			Trap is issued when a Network Resource changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Network Resource and includes its new state
NTF mhvsVPResourcesNetwAttChangedStatus	1.3.6.1.4.1.1457.0.56			Trap is issued when a Network Attachment changes state depending on the setting of mhvsVPResourcesTrapGeneration. The trap identifies the Network Attachment and includes its new state
NTF mhvsVPVideoChangedStatus	1.3.6.1.4.1.1457.0.57			Trap is issued when a video changes state depending on the setting of mhvsVPVideoTrapGeneration. The trap identifies the video and includes its new state
NTF mhvsVPVideoInstChangedStatus	1.3.6.1.4.1.1457.0.58			Trap is issued when a video instance changes state depending on the setting of mhvsVPVideoTrapGeneration. The trap identifies the video instance and includes its new state
NTF mhvsVPMenuChangedStatus	1.3.6.1.4.1.1457.0.59			Trap is issued when a menu changes state depending on the setting of mhvsVPMenuTrapGeneration. The trap identifies the menu and includes its new state
NTF mhvsVPMenuInstChangedStatus	1.3.6.1.4.1.1457.0.60			Trap is issued when a menu instance changes state depending on the setting of mhvsVPMenuTrapGeneration. The trap identifies the menu instance and includes its new state
NTF mhProcessStart	1.3.6.1.4.1.1457.0.101			Trap is issued when VEMon successfully started
NTF mhProcessTermination	1.3.6.1.4.1.1457.0.102			Trap is issued when VEMon has terminated
NTF vpProcessStart	1.3.6.1.4.1.1457.0.103			Trap is issued when VPMon successfully started
NTF vpProcessTermination	1.3.6.1.4.1.1457.0.104			Trap is issued when VPMon has terminated
NTF vpPartitionStateChanged	1.3.6.1.4.1.1457.0.105			Trap is issued when the mirror state has changed
NTF mhEnvironmentFanFailure	1.3.6.1.4.1.1457.0.106			Trap is issued when A Fan has failed
NTF mhEnvironmentPowerSupplyFailure	1.3.6.1.4.1.1457.0.107			Trap is issued when A Power Supply has failed
NTF mhEnvironmentTemperatureAlarm	1.3.6.1.4.1.1457.0.108			Trap is issued when Over Temperature is detected
mediaHawkVideoServer	1.3.6.1.4.1.1457.1
mediaHawkVSVP	1.3.6.1.4.1.1457.1.2
mhvsVPVideo	1.3.6.1.4.1.1457.1.2.1
mhvsVPVideoTable	1.3.6.1.4.1.1457.1.2.1.2		not-accessible	Table listing the Videos on the Video Server.
mhvsVPVideoEntry	1.3.6.1.4.1.1457.1.2.1.2.1		not-accessible	Entry for table mhvsVPVideoTable
INT mhvsVPVideoIndex	1.3.6.1.4.1.1457.1.2.1.2.1.1	INTEGER	read-only	Unique identifier of this video
STR mhvsVPVideoName	1.3.6.1.4.1.1457.1.2.1.2.1.2	DisplayString	read-only	Name of this video
GAU mhvsVPVideoNumCopies	1.3.6.1.4.1.1457.1.2.1.2.1.3	Gauge	read-only	Number of copies
INT mhvsVPVideoSize	1.3.6.1.4.1.1457.1.2.1.2.1.4	INTEGER	read-only	Size in KBytes of the video
GAU mhvsVPVideoNumOpen	1.3.6.1.4.1.1457.1.2.1.2.1.5	Gauge	read-only	Current number of streams using this video
INT mhvsVPVideoStatus	1.3.6.1.4.1.1457.1.2.1.2.1.6	INTEGER	read-write	Status of the video
INT mhvsVPVideoContentSpace	1.3.6.1.4.1.1457.1.2.1.2.1.7	INTEGER	read-only	Space in KBytes of the content files belonging to the video
INT mhvsVPVideoIndexSpace	1.3.6.1.4.1.1457.1.2.1.2.1.8	INTEGER	read-only	Space in KBytes of the index files belonging to the video
mhvsVPVideoInstTable	1.3.6.1.4.1.1457.1.2.1.3		not-accessible	Table listing each instance of the Videos on the Video Server
mhvsVPVideoInstEntry	1.3.6.1.4.1.1457.1.2.1.3.1		not-accessible	Entry for table mhvsVPVideoInstTable
INT mhvsVPVideoInstVideoIndex	1.3.6.1.4.1.1457.1.2.1.3.1.1	INTEGER	read-only	Unique identifier of this video. Set to mhvsVPVideoIndex.
INT mhvsVPVideoInstDiskIndex	1.3.6.1.4.1.1457.1.2.1.3.1.3	INTEGER	read-only	The disk holding this instance. Set to mhvsVPResourcesDiskIndex.
GAU mhvsVPVideoInstNumOpen	1.3.6.1.4.1.1457.1.2.1.3.1.4	Gauge	read-only	Current number of streams using this video instance
INT mhvsVPVideoInstStatus	1.3.6.1.4.1.1457.1.2.1.3.1.5	INTEGER	read-write	The status of this video instance
STR mhvsVPVideoInstPath	1.3.6.1.4.1.1457.1.2.1.3.1.6	DisplayString	read-only	Path to the video from the disk
INT mhvsVPVideoInstIndex	1.3.6.1.4.1.1457.1.2.1.3.1.7	INTEGER	read-only	The index for this video instance
INT mhvsVPVideoInstSize	1.3.6.1.4.1.1457.1.2.1.3.1.8	INTEGER	read-only	Size in KBytes of the video instance
INT mhvsVPVideoTrapGeneration	1.3.6.1.4.1.1457.1.2.1.4	INTEGER	read-write	Controls when the mhvsVPVideoChangedStatus and mhvsVPVideoInstChangedStatus traps are generated. off => no traps are generated, on => video or video instance changes state
mhvsVPResources	1.3.6.1.4.1.1457.1.2.2
GAU mhvsVPResourcesMaxStreams	1.3.6.1.4.1.1457.1.2.2.1	Gauge	read-only	The maximum number of streams supported by the Video Server
GAU mhvsVPResourcesNumStreams	1.3.6.1.4.1.1457.1.2.2.2	Gauge	read-only	The number of streams running on the Video Server
GAU mhvsVPResourcesMaxBandwidth	1.3.6.1.4.1.1457.1.2.2.3	Gauge	read-only	The maximum bandwidth in kbps supported by the Video Server
GAU mhvsVPResourcesBandwidth	1.3.6.1.4.1.1457.1.2.2.4	Gauge	read-only	The currently allocated bandwidth in kbps on the Video Server
mhvsVPResourcesVPTable	1.3.6.1.4.1.1457.1.2.2.5		not-accessible	Table listing the Video Pumps on the Video Server.
mhvsVPResourcesVPEntry	1.3.6.1.4.1.1457.1.2.2.5.1		not-accessible	Entry for table mhvsVPResourcesVPTable
INT mhvsVPResourcesVPIndex	1.3.6.1.4.1.1457.1.2.2.5.1.1	INTEGER	read-only	A unique number within the Video Server for the Video Pump
GAU mhvsVPResourcesVPMax	1.3.6.1.4.1.1457.1.2.2.5.1.2	Gauge	read-only	The maximum resources for this Video Pump
GAU mhvsVPResourcesVPUsed	1.3.6.1.4.1.1457.1.2.2.5.1.3	Gauge	read-only	The used resources for this Video Pump
GAU mhvsVPResourcesVPNumStreams	1.3.6.1.4.1.1457.1.2.2.5.1.4	Gauge	read-only	The number of streams using this Video Pump
INT mhvsVPResourcesVPStatus	1.3.6.1.4.1.1457.1.2.2.5.1.5	INTEGER	read-write	The status of this Video Pump
INT mhvsVPResourcesVPConnected	1.3.6.1.4.1.1457.1.2.2.5.1.6	INTEGER	read-only	Indicates whether this Video Pump is connected to the Video Server
INT mhvsVPResourcesVPHostIndex	1.3.6.1.4.1.1457.1.2.2.5.1.7	INTEGER	read-only	Set to spsHostsindex in spsHostsTable
mhvsVPResourcesDiskTable	1.3.6.1.4.1.1457.1.2.2.6		not-accessible	Table listing the Disk Resources on the Video Server.
mhvsVPResourcesDiskEntry	1.3.6.1.4.1.1457.1.2.2.6.1		not-accessible	Entry for table mhvsVPResourcesDiskTable
INT mhvsVPResourcesDiskIndex	1.3.6.1.4.1.1457.1.2.2.6.1.1	INTEGER	read-only	A unique number within the Video Server for the disk
STR mhvsVPResourcesDiskName	1.3.6.1.4.1.1457.1.2.2.6.1.2	DisplayString	read-only	The name of the disk
GAU mhvsVPResourcesDiskMax	1.3.6.1.4.1.1457.1.2.2.6.1.3	Gauge	read-write	The maximum resources for this disk
GAU mhvsVPResourcesDiskUsed	1.3.6.1.4.1.1457.1.2.2.6.1.4	Gauge	read-only	The used resources for this disk
GAU mhvsVPResourcesDiskNumStreams	1.3.6.1.4.1.1457.1.2.2.6.1.5	Gauge	read-only	The number of streams using this disk
INT mhvsVPResourcesDiskStatus	1.3.6.1.4.1.1457.1.2.2.6.1.6	INTEGER	read-write	The status of this disk
INT mhvsVPResourcesDiskMaxCapacity	1.3.6.1.4.1.1457.1.2.2.6.1.7	INTEGER	read-only	The maximum capacity in KBytes of the content partition of this disk
INT mhvsVPResourcesDiskUsedCapacity	1.3.6.1.4.1.1457.1.2.2.6.1.8	INTEGER	read-only	The used capacity in KBytes of the content partition of this disk
INT mhvsVPResourcesDiskMaxSysCapacity	1.3.6.1.4.1.1457.1.2.2.6.1.9	INTEGER	read-only	The maximum capacity in KBytes of the /sys partition of this disk
INT mhvsVPResourcesDiskUsedSysCapacity	1.3.6.1.4.1.1457.1.2.2.6.1.10	INTEGER	read-only	The used capacity in KBytes of the /sys partition of this disk
mhvsVPResourcesNetwTable	1.3.6.1.4.1.1457.1.2.2.7		not-accessible	Table listing the Network Resources on the Video Server.
mhvsVPResourcesNetwEntry	1.3.6.1.4.1.1457.1.2.2.7.1		not-accessible	Entry for table mhvsVPResourcesNetwTable
INT mhvsVPResourcesNetwIndex	1.3.6.1.4.1.1457.1.2.2.7.1.1	INTEGER	read-only	A unique number within the Video Server for the network
GAU mhvsVPResourcesNetwMax	1.3.6.1.4.1.1457.1.2.2.7.1.3	Gauge	read-write	The maximum resources for this network
GAU mhvsVPResourcesNetwUsed	1.3.6.1.4.1.1457.1.2.2.7.1.4	Gauge	read-only	The used resources for this network
GAU mhvsVPResourcesNetwNumStreams	1.3.6.1.4.1.1457.1.2.2.7.1.5	Gauge	read-only	The number of streams using this network
INT mhvsVPResourcesNetwType	1.3.6.1.4.1.1457.1.2.2.7.1.6	INTEGER	read-only	The type of this network
STR mhvsVPResourcesNetwId	1.3.6.1.4.1.1457.1.2.2.7.1.7	DisplayString	read-only	The id. of this network For DVB or QAM, this is the TSID. For CODEC, this is the Codec port number. For ATM, this is the resource id.. For IP, this is a user-defined identifier.
INT mhvsVPResourcesNetwStatus	1.3.6.1.4.1.1457.1.2.2.7.1.8	INTEGER	read-write	The status of this network
mhvsVPResourcesSPTable	1.3.6.1.4.1.1457.1.2.2.8		not-accessible	Table listing the Service Providers on the Video Server.
mhvsVPResourcesSPEntry	1.3.6.1.4.1.1457.1.2.2.8.1		not-accessible	Entry for table mhvsVPResourcesSPTable
INT mhvsVPResourcesSPIndex	1.3.6.1.4.1.1457.1.2.2.8.1.1	INTEGER	read-only	A unique number within the Video Server for the Service Provider
GAU mhvsVPResourcesSPMax	1.3.6.1.4.1.1457.1.2.2.8.1.2	Gauge	read-only	The maximum resources (i.e. sessions) for this Service Provider
GAU mhvsVPResourcesSPUsed	1.3.6.1.4.1.1457.1.2.2.8.1.3	Gauge	read-only	The used resources (i.e. sessions) for this Service Provider
INT mhvsVPResourcesSPStatus	1.3.6.1.4.1.1457.1.2.2.8.1.4	INTEGER	read-write	The status of this Service Provider
INT mhvsVPResourcesSPConnected	1.3.6.1.4.1.1457.1.2.2.8.1.5	INTEGER	read-only	Indicates whether this Service Provider is connected to the Video Server
INT mhvsVPResourcesSPHostIndex	1.3.6.1.4.1.1457.1.2.2.8.1.6	INTEGER	read-only	Set to spsHostsindex in spsHostsTable
mhvsVPResourcesDiskAttTable	1.3.6.1.4.1.1457.1.2.2.9		not-accessible	Table listing the Disk Attachments on the Video Server.
mhvsVPResourcesDiskAttEntry	1.3.6.1.4.1.1457.1.2.2.9.1		not-accessible	Entry for table mhvsVPResourcesDiskAttTable
INT mhvsVPResourcesDiskAttDiskIndex	1.3.6.1.4.1.1457.1.2.2.9.1.1	INTEGER	read-only	Corresponds to mhvsVPResourcesDiskIndex in mhvsVPResourcesDiskTable
INT mhvsVPResourcesDiskAttVPIndex	1.3.6.1.4.1.1457.1.2.2.9.1.2	INTEGER	read-only	Corresponds to mhvsVPResourcesVPIndex in mhvsVPResourcesVPTable
STR mhvsVPResourcesDiskAttDir	1.3.6.1.4.1.1457.1.2.2.9.1.3	DisplayString	read-only	The mount-point of the disk on the host
INT mhvsVPResourcesDiskAttStatus	1.3.6.1.4.1.1457.1.2.2.9.1.4	INTEGER	read-write	The status of this disk to VP attachment
INT mhvsVPResourcesDiskAttIndex	1.3.6.1.4.1.1457.1.2.2.9.1.5	INTEGER	read-only	Index into list of attachments for this disk
mhvsVPResourcesNetwAttTable	1.3.6.1.4.1.1457.1.2.2.10		not-accessible	Table listing the NetwAttork Resource Attachments on the Video Server.
mhvsVPResourcesNetwAttEntry	1.3.6.1.4.1.1457.1.2.2.10.1		not-accessible	Entry for table mhvsVPResourcesNetwAttTable
INT mhvsVPResourcesNetwAttFromType	1.3.6.1.4.1.1457.1.2.2.10.1.1	INTEGER	read-only	Corresponds to mhvsVPResourcesNetwType in mhvsVPResourcesNetwTable
INT mhvsVPResourcesNetwAttFromIndex	1.3.6.1.4.1.1457.1.2.2.10.1.2	INTEGER	read-only	Corresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTable
INT mhvsVPResourcesNetwAttToType	1.3.6.1.4.1.1457.1.2.2.10.1.3	INTEGER	read-only	The type of resource to which the network resource is attached
INT mhvsVPResourcesNetwAttToIndex	1.3.6.1.4.1.1457.1.2.2.10.1.4	INTEGER	read-only	If mhvsVPResourcesNetwAttToType is vp, this corresponds to mhvsVPResourcesVpId in mhvsVPResourcesVPTable. Otherwise, it corresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTable
INT mhvsVPResourcesNetwAttStatus	1.3.6.1.4.1.1457.1.2.2.10.1.5	INTEGER	read-write	The status of this network attachment
INT mhvsVPResourcesNetwAttIndex	1.3.6.1.4.1.1457.1.2.2.10.1.6	INTEGER	read-only	Index into list of attachments for this network resource
STR mhvsVPResourcesNetwAttName	1.3.6.1.4.1.1457.1.2.2.10.1.7	DisplayString	read-only	Name for this network attachment
INT mhvsVPResourcesTrapGeneration	1.3.6.1.4.1.1457.1.2.2.11	INTEGER	read-write	Controls when the mhvsVPResources...ChangedStatus traps are generated. off => no traps are generated, on => resource changes state
mhvsVPStreams	1.3.6.1.4.1.1457.1.2.3
INT mhvsVPStreamsTrapGeneration	1.3.6.1.4.1.1457.1.2.3.1	INTEGER	read-write	Controls when the mhvsVPStreamChangedStatus trap is generated. openClose => streams opened or closed, stateChange => streams opened or closed or change state
mhvsVPStreamsVideoTable	1.3.6.1.4.1.1457.1.2.3.2		not-accessible	Table relating Video Instances to Stream Instances
mhvsVPStreamsVideoEntry	1.3.6.1.4.1.1457.1.2.3.2.1		not-accessible	Entry for table mhvsVPStreamsVideoTable
INT mhvsVPStreamsVideoSSEIndex	1.3.6.1.4.1.1457.1.2.3.2.1.1	INTEGER	read-only	Set to spsStreamInstStreamSEIndex.
INT mhvsVPStreamsVideoSIIndex	1.3.6.1.4.1.1457.1.2.3.2.1.2	INTEGER	read-only	Set to spsStreamInstIndex.
INT mhvsVPStreamsVideoDiskIndex	1.3.6.1.4.1.1457.1.2.3.2.1.3	INTEGER	read-only	Set to mhvsVPVideoInstDiskIndex.
INT mhvsVPStreamsVideoVideoIndex	1.3.6.1.4.1.1457.1.2.3.2.1.4	INTEGER	read-only	Set to mhvsVPVideoInstVideoIndex.
mhvsVPStreamsNetwTable	1.3.6.1.4.1.1457.1.2.3.3		not-accessible	Table relating Network Resources to Stream Instances.
mhvsVPStreamsNetwEntry	1.3.6.1.4.1.1457.1.2.3.3.1		not-accessible	Entry for table mhvsVPStreamsNetwTable
INT mhvsVPStreamsNetwSSEIndex	1.3.6.1.4.1.1457.1.2.3.3.1.1	INTEGER	read-only	Corresponds to spsStreamInstStreamSEIndex in spsStreamInstTable
INT mhvsVPStreamsNetwSIIndex	1.3.6.1.4.1.1457.1.2.3.3.1.2	INTEGER	read-only	Corresponds to spsStreamInstIndex in spsStreamInstTable
INT mhvsVPStreamsNetwNetwType	1.3.6.1.4.1.1457.1.2.3.3.1.3	INTEGER	read-only	Corresponds to mhvsVPResourcesNetwType in mhvsVPResourcesNetwTable
INT mhvsVPStreamsNetwNetwIndex	1.3.6.1.4.1.1457.1.2.3.3.1.4	INTEGER	read-only	Corresponds to mhvsVPResourcesNetwIndex in mhvsVPResourcesNetwTable
mhvsVPMenu	1.3.6.1.4.1.1457.1.2.4
mhvsVPMenuTable	1.3.6.1.4.1.1457.1.2.4.2		not-accessible	Table listing the Menus on the Video Server.
mhvsVPMenuEntry	1.3.6.1.4.1.1457.1.2.4.2.1		not-accessible	Entry for table mhvsVPMenuTable
INT mhvsVPMenuIndex	1.3.6.1.4.1.1457.1.2.4.2.1.1	INTEGER	read-only	Unique identifier of this menu
STR mhvsVPMenuName	1.3.6.1.4.1.1457.1.2.4.2.1.2	DisplayString	read-only	Name of this menu
GAU mhvsVPMenuNumCopies	1.3.6.1.4.1.1457.1.2.4.2.1.3	Gauge	read-only	Number of copies
GAU mhvsVPMenuNumOpen	1.3.6.1.4.1.1457.1.2.4.2.1.5	Gauge	read-only	Current number of streams using this menu
INT mhvsVPMenuStatus	1.3.6.1.4.1.1457.1.2.4.2.1.6	INTEGER	read-write	Status of the menu
mhvsVPMenuInstTable	1.3.6.1.4.1.1457.1.2.4.3		not-accessible	Table listing each instance of the Menus on the Video Server
mhvsVPMenuInstEntry	1.3.6.1.4.1.1457.1.2.4.3.1		not-accessible	Entry for table mhvsVPMenuInstTable
INT mhvsVPMenuInstMenuIndex	1.3.6.1.4.1.1457.1.2.4.3.1.1	INTEGER	read-only	Unique identifier of this menu. Set to mhvsVPMenuIndex.
INT mhvsVPMenuInstDiskIndex	1.3.6.1.4.1.1457.1.2.4.3.1.3	INTEGER	read-only	The disk holding this instance. Set to mhvsVPResourcesDiskIndex.
GAU mhvsVPMenuInstNumOpen	1.3.6.1.4.1.1457.1.2.4.3.1.4	Gauge	read-only	Current number of streams using this menu instance
INT mhvsVPMenuInstStatus	1.3.6.1.4.1.1457.1.2.4.3.1.5	INTEGER	read-write	The status of this menu instance
STR mhvsVPMenuInstPath	1.3.6.1.4.1.1457.1.2.4.3.1.6	DisplayString	read-only	Path to the menu from the disk
INT mhvsVPMenuInstIndex	1.3.6.1.4.1.1457.1.2.4.3.1.7	INTEGER	read-only	The index for this menu instance
INT mhvsVPMenuTrapGeneration	1.3.6.1.4.1.1457.1.2.4.4	INTEGER	read-write	Controls when the mhvsVPMenuChangedStatus and mhvsVPMenuInstChangedStatus traps are generated. off => no traps are generated, on => menu or menu instance changes state
mediaHawkVEMon	1.3.6.1.4.1.1457.1.3
INT mediaHawkVEMonAlive	1.3.6.1.4.1.1457.1.3.1	INTEGER	read-only	Always 1. If VEMon is not running on the target system, a snmp error or timeout will occur.
mediaHawkDVBTable	1.3.6.1.4.1.1457.1.3.2		not-accessible	Table listing the DVBs on the IVM.
mediaHawkDVBEntry	1.3.6.1.4.1.1457.1.3.2.1		not-accessible	Entry for table mediaHawkDVBTable
INT mhDVBStatus	1.3.6.1.4.1.1457.1.3.2.1.1	INTEGER	read-only	'1' if the DVB-ASI card is on-line and operational, '0' if not.
STR mhDVBName	1.3.6.1.4.1.1457.1.3.2.1.2	DisplayString	read-only	The device name of the DVB-ASI software device, currently either 'gi0' or 'mh0'.
INT mhDVBMTU	1.3.6.1.4.1.1457.1.3.2.1.3	INTEGER	read-only	The MTU (maximum transmission unit) size for the DVB card Interface.
INT mhDVBReceivePackets	1.3.6.1.4.1.1457.1.3.2.1.4	INTEGER	read-only	Total packets received by this DVB-ASI card. Normally 0.
INT mhDVBReceiveErrors	1.3.6.1.4.1.1457.1.3.2.1.5	INTEGER	read-only	Receive errors detected by this DVB-ASI card. Normally 0.
INT mhDVBTransmitPackets	1.3.6.1.4.1.1457.1.3.2.1.6	INTEGER	read-only	Total packets transmitted by this DVB-ASI card since the system was last restarted. Packets are 48128 bytes long.
INT mhDVBTransmitErrors	1.3.6.1.4.1.1457.1.3.2.1.7	INTEGER	read-only	Total number of transmit errors detected by this DVB-ASI card since the system was last restarted.
INT mhDVBTransmitKBytesPerSec	1.3.6.1.4.1.1457.1.3.2.1.8	INTEGER	read-only	Average number of 1K bytes transferred per second over the last 10 seconds for this DVB-ASI card.
mediaHawkDisk	1.3.6.1.4.1.1457.1.3.3
INT mhDiskNumDisks	1.3.6.1.4.1.1457.1.3.3.1	INTEGER	read-only	Total number of disk drives accessible to this CPU. Determines the number of entries in the following disk information variables.
INT mhDiskKBytesPerSec	1.3.6.1.4.1.1457.1.3.3.2	INTEGER	read-only	Total number of Kilobytes per second of disk activity from this particular CPU from all drives connected to it. Averaged over the last 10 seconds.
mhDiskDrivesTable	1.3.6.1.4.1.1457.1.3.3.3		not-accessible	Table listing the Disk Drives on the IVM.
mhDiskDrivesEntry	1.3.6.1.4.1.1457.1.3.3.3.1		not-accessible	Entry for table mhDiskDrivesTable
STR mhDiskDriveName	1.3.6.1.4.1.1457.1.3.3.3.1.1	DisplayString	read-only	Returns a string identifying the particular drive. The first 3 characters give the controller name, the next digit is the controller number. This is followed by a logical drive number. I.e. fib0_12. This drive number does not correspond to any other value in this MIB.
INT mhDiskDriveReads	1.3.6.1.4.1.1457.1.3.3.3.1.2	INTEGER	read-only	The total number of read commands issued to the drive from this system since the system was booted.
INT mhDiskDriveWrites	1.3.6.1.4.1.1457.1.3.3.3.1.3	INTEGER	read-only	The total number of write commands issued to the drive from this system since the system was booted.
INT mhDiskDriveReadKBytes	1.3.6.1.4.1.1457.1.3.3.3.1.4	INTEGER	read-only	The total quantity of data read since the system was booted off of the specified drive. Counted in units of 1024 bytes.
INT mhDiskDriveWriteKBytes	1.3.6.1.4.1.1457.1.3.3.3.1.5	INTEGER	read-only	The total quantity of data written to the specified drive since the system was booted. Counted in units of 1024 bytes.
INT mhDiskDriveReadKBytesPerSec	1.3.6.1.4.1.1457.1.3.3.3.1.6	INTEGER	read-only	Average number of bytes read off of the specified drive from this system measured in units of 1024 bytes. This average is over the last 5 seconds.
INT mhDiskDriveWriteKBytesPerSec	1.3.6.1.4.1.1457.1.3.3.3.1.7	INTEGER	read-only	Average number of bytes written to the specified drive from this system measured in units of 1024 bytes. This average is over the last 5 seconds.
INT mhContentMounted	1.3.6.1.4.1.1457.1.3.3.4	INTEGER	read-only	Returns an integer to indicate that the Video Content disk partition is mounted and on-line. A 1 indicates that the content is on-line, a 0 indicates it is not.
mediaHawkEnvironment	1.3.6.1.4.1.1457.1.3.4
mhEnvironmentFanTable	1.3.6.1.4.1.1457.1.3.4.1		not-accessible	Table listing the Fans on the IVM.
mhEnvironmentFanEntry	1.3.6.1.4.1.1457.1.3.4.1.1		not-accessible	Entry for table mhEnvironmentFanTable
STR mhEnvironmentFanLocation	1.3.6.1.4.1.1457.1.3.4.1.1.1	DisplayString	read-only	Returns a string indicating the Video Array ID followed by the number, such As '1A,0' for the first fan, '1A,2' for the third fan, etc.
INT mhEnvironmentFanStatus	1.3.6.1.4.1.1457.1.3.4.1.1.2	INTEGER	read-only	Returns an integer of either 0 if the fan has failed or 1 if the fan is working properly.
mhEnvironmentPowerSupplyTable	1.3.6.1.4.1.1457.1.3.4.2		not-accessible	Table listing the Power Supplies on the IVM.
mhEnvironmentPowerSupplyEntry	1.3.6.1.4.1.1457.1.3.4.2.1		not-accessible	Entry for table mhEnvironmentPowerSupplyTable
STR mhEnvironmentPowerSupplyLocation	1.3.6.1.4.1.1457.1.3.4.2.1.1	DisplayString	read-only	Returns a string indicating the Video Array ID followed by the number, such as '1A,0' for the left supply, '1A,2' for the right supply, etc.
INT mhEnvironmentPowerSupplyStatus	1.3.6.1.4.1.1457.1.3.4.2.1.2	INTEGER	read-only	Returns an integer as follows: -1 if the power supply is missing or not plugged in, 0 if the power supply has failed, or 1 if the power supply is working properly.
mhEnvironmentTemperatureTable	1.3.6.1.4.1.1457.1.3.4.3		not-accessible	Table listing the Temperature sensors on the IVM.
mhEnvironmentTemperatureEntry	1.3.6.1.4.1.1457.1.3.4.3.1		not-accessible	Entry for table mhEnvironmentTemperatureTable
STR mhEnvironmentTemperatureLocation	1.3.6.1.4.1.1457.1.3.4.3.1.1	DisplayString	read-only	Returns a string indicating the location of the related temperature sensor, such as 'Inlet LR' for lower right air inlet sensor.
INT mhEnvironmentTemperatureValue	1.3.6.1.4.1.1457.1.3.4.3.1.2	INTEGER	read-only	Returns the temperature of the related sensor, in degrees C.
INT mhEnvironmentTemperatureRedLine	1.3.6.1.4.1.1457.1.3.4.3.1.3	INTEGER	read-only	Returns the maximum permissible temperature of the related sensor, in In degrees C. Temperatures over this value may cause a system failure.
INT mediaHawkVideoEngineHealth	1.3.6.1.4.1.1457.1.3.5	INTEGER	read-only	Returns a 1, 2, or 3 for the health of the addressed engine. 1 is red (something is down); 2 = yellow; 3 = green. Checks status of DVB card, etc.
INT mediaHawkArrayHealth	1.3.6.1.4.1.1457.1.3.6	INTEGER	read-only	Returns a 1, 2, or 3 for the health of the overall video array. 1 is red; (something is down); 2 = yellow; 3 = green. Checks particular engine to which the value is addressed, along with the health of the disks, power supplies, fans, etc.
STR mediaHawkShutdown	1.3.6.1.4.1.1457.1.3.7	DisplayString	read-write	A writable variable used to request a particular engine or full video array to shutdown or restart. Passes a string indicating the engine or array followed by a code indicating the function to perform.
STR mediaHawkDiskDisable	1.3.6.1.4.1.1457.1.3.8	DisplayString	read-write	A writable variable used to request a particular disk drive to be disabled and spun down. Passes a string indicating the array followed by the drive position, such as 1A2.3. Returns a string indicating status of the operation.
STR mediaHawkDiskEnable	1.3.6.1.4.1.1457.1.3.9	DisplayString	read-write	A writable variable used to request a particular disk drive to be enabled and spun up. Passes a string indicating the array followed by the drive position, such as 1A2.3. Returns a string indicating status of the operation.
mediaHawkVPMon	1.3.6.1.4.1.1457.1.4
INT mediaHawkVPMonAlive	1.3.6.1.4.1.1457.1.4.1	INTEGER	read-only	Always 1. If VPMon is not running on the target system, a snmp error or timeout will occur.
INT mhPartitionLastUnit	1.3.6.1.4.1.1457.1.4.2	INTEGER	read-only	Returns last currently configured Virtual Partition number. A value of -1 indicates that there are currently no configured virtual partitions in the target system.
INT mhPartitionCount	1.3.6.1.4.1.1457.1.4.3	INTEGER	read-only	Returns the maximum number of virtual partitions that may be configured in the target system. A value of 0 indicates that the Virtual Partition driver has not been configured into the kernel.
mhPartitionsTable	1.3.6.1.4.1.1457.1.4.4		not-accessible	Table listing the Partitions on the IVM.
mhPartitionsEntry	1.3.6.1.4.1.1457.1.4.4.1		not-accessible	Entry for table mhPartitionsTable
STR mhPartitionName	1.3.6.1.4.1.1457.1.4.4.1.1	DisplayString	read-only	Returns the path name of the raw device associated with VP unit 'N'. Examples: mhPartitionName.0 Returns '/dev/rdsk/vp0' mhPartitionName.1 Returns '/dev/rdsk/vp1'.
STR mhPartitionType	1.3.6.1.4.1.1457.1.4.4.1.2	DisplayString	read-only	Returns current configuration of VP unit 'N'. Legal values are: 'unconfigured' partition has not been configured 'mirror' configured as a mirrored device 'stripe' configured as a striped device.
STR mhPartitionState	1.3.6.1.4.1.1457.1.4.4.1.3	DisplayString	read-only	Returns the current state of VP unit 'N'. Legal values are: 'unconfigured' partition has not been configured 'striped' configured as a striped device 'verifying' mirror is currently synchronized and is executing a mirror integrity check. 'restoring' mirror is currently being restored. 'synchronized mirror is currently synchronized. 'primary disk failure' a primary disk failure has caused the mirror to loose synchronization. The primary disk device requires maintenance. 'secondary disk failure' a secondary disk failure has caused the mirror to loose synchronization. The secondary disk device requires maintenance. 'primary+secondary disk failure' 'tertiary disk failure' 'primary+tertiary disk failure' 'secondary+tertiary disk failure' 'triple disk failure' 'unsynchronized' the mirror is not synchronized and needs to be restored. This state occurs as a result of a system panic or hang, not as a result of a disk failure.
INT mhPartitionActiveReadCount	1.3.6.1.4.1.1457.1.4.4.1.4	INTEGER	read-only	Returns the current number of outstanding read requests on VP unit 'N'.
INT mhPartitionActiveWriteCount	1.3.6.1.4.1.1457.1.4.4.1.5	INTEGER	read-only	Returns the current number of outstanding write requests on VP unit 'N'.
INT mhPartitionTotalErrors	1.3.6.1.4.1.1457.1.4.4.1.6	INTEGER	read-only	The total number of I/O errors on VP unit 'N' since system initialization.
INT mhPartitionSliceSize	1.3.6.1.4.1.1457.1.4.4.1.7	INTEGER	read-only	If mhPartitionType='stripe', this is the stripe size as defined by vpinit(1m). Otherwise, a 0 is returned.
INT mhPartitionSizeKbytes	1.3.6.1.4.1.1457.1.4.4.1.8	INTEGER	read-only	The size, in kilobytes, of this VP is returned.
STR mhPartitionReaderMode	1.3.6.1.4.1.1457.1.4.4.1.9	DisplayString	read-write	none The VP is not a mirror. primary When this mirror is synchronized, all read requests will be scheduled exclusively to the primary partition. secondary When this mirror is synchronized, all read requests will be scheduled exclusively to the secondary partition. distributed When this mirror is synchronized, all read requests will be distributed between the two partitions.
INT mhPartitionWriterMode	1.3.6.1.4.1.1457.1.4.4.1.10	INTEGER	read-write	-1 The VP is not a mirror. 0 When this mirror is synchronized, the first write to this device will result in the on-disk state of the mirror to be marked 'dirty'. The final close(2) of this VP will result in the VP being marked 'clean'. These on-disk states are used during system crash recover to maintain the integrity of the mirror. >0 When this mirror is synchronized, the first write to this VP.
INT mhPartitionRestoreThrottle	1.3.6.1.4.1.1457.1.4.4.1.11	INTEGER	read-write	During a mirrored restore or verify operation, an artificial delay may be performed between each read/write (restore) or read/read (verify) sequence. This value is the number of microseconds to delay. Note that the VP driver converts this value into a number of clock 'ticks', so microsecond resolution is not actually possible. Specifying a delay between 1 and 16666 results in a 1 tick delay, between 16667 and 33333 results in a 2 tick delay, etc. 0 No delay is performed. This results in the fastest possible restoration/verification of the mirror at the expense of I/O bandwidth. >0 The specified delay is performed. This lengthens the restoration/verification process, but is more friendly to other transfers which are taking place on the same controller(s).
STR mhPartitionProgressMeter	1.3.6.1.4.1.1457.1.4.4.1.12	DisplayString	read-only	During a mirrored restore or verify operation, this value indicates the completion percentage. This value is always between '0.0%' and '100.0%'. A synchronized mirror will report this value as '100.0%'.
INT mhPartitionMemberCount	1.3.6.1.4.1.1457.1.4.4.1.13	INTEGER	read-only	Returns the number of sub-devices which comprise this VP unit. Unconfigured VPs return 0, mirror VPs return 2, and striped VP return the number of striped partitions.
STR mhPartitionMemberDevices	1.3.6.1.4.1.1457.1.4.4.1.14	DisplayString	read-only	Returns the names of the sub-devices which comprise this VP unit. Normally, the named devices are the same as found in /dev/dsk. For example: 3s0 4s0. In the event that the device node for the configured device cannot be located, the major and minor number will be returned (this is very unlikely to happen). For example: 101,57856.
INT mhPartitionStartRestore	1.3.6.1.4.1.1457.1.4.4.1.15	INTEGER	read-write	Returns a 1 if a restore or verify operation is currently in progress, or a 0 if not. This option can be used to initiate a repair, restore, or verify operation as follows: 1 Repair (vpinit -R equivalent) 2 Restore (vpinit -r equivalent) 3 Repair and Restore (vpinit -Rr equivalent) 4 Verify (vpinit -t equivalent) All other set values are silently ignored.
INT mhPartitionCancelRestore	1.3.6.1.4.1.1457.1.4.4.1.16	INTEGER	read-write	When read, returns a 0. When set to a value of 1, the currently executing restore or verify operation is terminated. This operation is ignored if any value other than 1 is set, or if the specified VP device is not currently restoring or verifying the mirror.
INT mpPartitionErrorMask	1.3.6.1.4.1.1457.1.4.4.1.17	INTEGER	read-write	Returns an integer value [0..7] which represents a bitmask of member devices which have reported an I/O error. This value is a logical 'or' of all errant partition members. The bitmask is encoded as follows: 0 No members have reported a failure (green). 1 Primary member failure (yellow). 2 Secondary member failure (yellow). 3 Primary and secondary member failures (red). 4 Tertiary member failure (yellow). 5 Primary and tertiary member failures (red). 6 Secondary and tertiary member failures (red). 7 Primary, secondary and tertiary member failures (red).
STR mhPartitionHealth	1.3.6.1.4.1.1457.1.4.4.1.18	DisplayString	read-only	Returns a string which indicates the overall health of the VP subsystem: none This device is not a mirror. red A double or triple drive failure has occurred. yellow A single drive fault has occurred on the mirrored set. green All members of the mirror are synchronized.
STR mhPartitionRestoreStatus	1.3.6.1.4.1.1457.1.4.4.1.19	DisplayString	read-only	Returns a string which indicates the restore/verify status associated with either the current, or last, restore/verify operation performed. NOTE: This status does NOT reflect the current status of the mirror. This is simply a historical log of the last restore or verify command which started execution on the associated VP device. For example, this status may report a successfully executed restore operation but the mirror may have lost synchronization in the time period since the execution of the restore. The possible strings that can be returned are: restore/verify not run since reboot The restore/verify status is not persistent over kernel reboots. This status is returned whenever the restore or verify commands have not been issued since the last reboot. restore successful The last command issued to this VP was a restore which was successful. verify successful The last command issued to this VP was a verify which was successful. restore cleared read errors The restore cleared the VP's read error counters. A physical restore operation was not performed. restore operation active A restore operation is currently active on this VP. verify operation active A verify operation is currently active on this VP. restore was canceled A restore operation was started but the canceled at the user's request. verify was canceled A verify operation was started but the canceled at the user's request. mirror needs repair A restore operation was attempted on a mirror that need to be repaired. memory allocation failure Buffer allocation necessary to perform a restore or verify operation were not available. cannot verify a 'forced' mirror A verify operation was attempted on a mirror that was created using the 'force' option. Since the mirror was never synchronized on a block-by-block basis, the verify operation is expected to fail. synchronization was lost during verify The verify operation was aborted due to a loss of synchronization. The error causing the loss of synchronization was not associated with the verify operation (an external event caused the loss). error reading primary device A restore or verify command aborted due to a read error on the primary device during the operation. error writing primary device A restore command aborted due to a write error on the primary device during the restore operation. error reading secondary device A restore or verify command aborted due to a read error on the secondary device during the operation. error writing secondary device A restore command aborted due to a write error on the secondary device during the restore operation. error accessing tertiary device A restore or verify command aborted due to failure either communicating with a Loop B client system or because of a read or write error on the tertiary device. verify error A verify error occured between the primary and secondary mirrored device. tertiary device verify error A verify error occured between the primary and tertiary mirrored device. status unavailable The restore status returned was invalid.
DAT mhPartitionRestoreDate	1.3.6.1.4.1.1457.1.4.4.1.20	DateAndTime	read-only	Returns the date and time of the last partition restore, in DateAndTime format of 11 octets.
STR mhPartitionMountPoint	1.3.6.1.4.1.1457.1.4.4.1.21	DisplayString	read-only	Returns a string denoting the mount-point name if this partition is the mount point for any file system. A null string is returned if this partition is not a mount point. MediaHawk Model 2000 Systems only.
INT mhPartitionFreeSpace	1.3.6.1.4.1.1457.1.4.4.1.22	INTEGER	read-only	Applicable only if previous entry (mount point) returns a non-null string. Returns an integer from 0 to 99 indicating the percentage of free space in this partition. MediaHawk Model 2000 Systems only.
STR mhVPSubsystemHealth	1.3.6.1.4.1.1457.1.4.5	DisplayString	read-only	Returns a string which indicates the overall health of the VP subsystem: none There are no mirrors confgiured. red At least one partition has reported a double or triple drive failure. yellow At least one partition has reported a single member fault. green All partitions are synchronized .

RFC description

Monitors Concurrent MediaHawk video server resources, videos, streams, and environmental conditions.

Start monitoring Concurrent Computer Corporation MediaHawk video server appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MEDIAHAWK-MIB

What Is MEDIAHAWK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description