All MIBs › H3C-QOS-PROFILE-MIB
Organization: Huawei-3com Technologies co.,Ltd.
Last Updated: 2004-07-06
Category: Quality of Service, Vendor: H3C/HH3C
Description: H3C MIB for QoS profile management defining reusable traffic service policies applied to interfaces or users.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is H3C-QOS-PROFILE-MIB?
H3C-QOS-PROFILE-MIB is a Huawei-3Com (H3C) Technologies proprietary MIB configuring named QoS profiles bundling multiple traffic-limiting actions. Its profile table, keyed by index, records name, action count, and row status, while a traffic-limit table records, per profile/action, direction, user/IP/link ACL number and rule, target rate (Mbps/Kbps), peak rate, CIR/CBS/EBS/PIR, and conform-action local precedence. As a configuration MIB it lets an administrator confirm a named QoS profile's CIR/PIR rate-limiting parameters and which ACL selects the traffic it applies to. It is deployed on H3C (3Com/Huawei) routers/switches. Engineers can download the H3C-QOS-PROFILE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-QOS-PROFILE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C (3Com/Huawei) routers/switches
Monitoring Examples
An administrator checks h3cQoSTrafLmtCIR and h3cQoSTrafLmtUserAclRule to confirm a QoS profile's committed rate and matching traffic on an H3C device.
What Can Be Monitored
- named QoS profile rate-limiting configuration
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-3COM-OID-MIB
| h3cCommon | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| h3cQosProfile | 1.3.6.1.4.1.2011.10.2.17 | The private mib file includes the general information QoS profile. | ||
| h3cQoSProfObjects | 1.3.6.1.4.1.2011.10.2.17.1 | |||
| h3cQoSProf | 1.3.6.1.4.1.2011.10.2.17.1.1 | |||
| h3cQoSProfTable | 1.3.6.1.4.1.2011.10.2.17.1.1.1 | not-accessible | QoS profile table is used to config the qos profiles. | |
| h3cQoSProfEntry | 1.3.6.1.4.1.2011.10.2.17.1.1.1.1 | not-accessible | ||
| I32 h3cQoSProfIndex | 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.1 | Integer32 | not-accessible | QoS profile table index. |
| OCT h3cQoSProfName | 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.2 | OCTET STRING | read-create | QoS profile name. |
| I32 h3cQoSProfActionNumber | 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.3 | Integer32 | read-only | Total number of actions of a QoS profile. |
| ROW h3cQoSProfRowStatus | 1.3.6.1.4.1.2011.10.2.17.1.1.1.1.4 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| h3cQoSAction | 1.3.6.1.4.1.2011.10.2.17.1.2 | |||
| h3cQoSTrafficLimitTable | 1.3.6.1.4.1.2011.10.2.17.1.2.1 | not-accessible | Traffic limit table is used to set the average rate or peak rate of the flow. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. | |
| h3cQoSTrafficLimitEntry | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1 | not-accessible | ||
| I32 h3cQoSTrafLmtProfIndex | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.1 | Integer32 | not-accessible | The index of QoS profile which the traffic-limit action belongs to. |
| I32 h3cQoSTrafLmtActionIndex | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.2 | Integer32 | not-accessible | The index of traffic-limit action. |
| H3C h3cQoSTrafLmtDirection | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.3 | H3cQoSDirection | read-create | The direction of traffic-limit action. |
| I32 h3cQoSTrafLmtUserAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.4 | Integer32 | read-create | The number of user-based acl group. |
| I32 h3cQoSTrafLmtUserAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.5 | Integer32 | read-create | The subitem of user-based acl rule. |
| I32 h3cQoSTrafLmtIpAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.6 | Integer32 | read-create | The number of Ip-based acl group. |
| I32 h3cQoSTrafLmtIpAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.7 | Integer32 | read-create | The subitem of IP-based acl rule. |
| I32 h3cQoSTrafLmtLinkAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.8 | Integer32 | read-create | The number of Link-based acl group |
| I32 h3cQoSTrafLmtLinkAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.9 | Integer32 | read-create | The subitem of Link-based acl rule. |
| I32 h3cQoSTrafLmtTargetRateMbps | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.10 | Integer32 | read-create | Target rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product. |
| I32 h3cQoSTrafLmtTargetRateKbps | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.11 | Integer32 | read-create | Target rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product. |
| I32 h3cQoSTrafLmtPeakRate | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.12 | Integer32 | read-create | Peak rate |
| I32 h3cQoSTrafLmtCIR | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.13 | Integer32 | read-create | Committed Information Rate. unit:kbps. |
| I32 h3cQoSTrafLmtCBS | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.14 | Integer32 | read-create | Committed Burst Size. unit:byte. |
| I32 h3cQoSTrafLmtEBS | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.15 | Integer32 | read-create | Excess Burst Size. unit:byte. |
| I32 h3cQoSTrafLmtPIR | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.16 | Integer32 | read-create | Peak Information Rate. unit:kbps. |
| I32 h3cQoSTrafLmtConformLocalPre | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.17 | Integer32 | read-create | The local precedence of conformed flow. |
| INT h3cQoSTrafLmtConformActionType | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.18 | INTEGER | read-create | The action type of conformed flow. |
| INT h3cQoSTrafLmtExceedActionType | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.19 | INTEGER | read-create | The action type of non-conformed flow. |
| I32 h3cQoSTrafLmtExceedDscp | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.20 | Integer32 | read-create | The remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking DSCP, then value 255 is returned for get/get-next operation. |
| I32 h3cQoSTrafLmtExceedCos | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.21 | Integer32 | read-create | The remarked COS value of non-conformed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking COS, then value 255 is returned for get/get-next operation. |
| ROW h3cQoSTrafLmtRowStatus | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.22 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| I32 h3cQoSTrafLmtConformCos | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.23 | Integer32 | read-create | If the user chooses remark-cos value of the h3cQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-effort Specify best-effort priority(0) background Specify background priority(1) spare Specify spare priority(2) excellent-effort Specify excellent-effort priority(3) controlled-load Specify controlled-load priority(4) video Specify video priority(5) voice Specify voice priority(6) network-management Specify network-management priority(7) 255 indicates invalid value. |
| I32 h3cQoSTrafLmtConformDscp | 1.3.6.1.4.1.2011.10.2.17.1.2.1.1.24 | Integer32 | read-create | If the user chooses remark-dscp value of the h3cQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) 255 indicates invalid value. |
| h3cQoSTrafficPriorityTable | 1.3.6.1.4.1.2011.10.2.17.1.2.2 | not-accessible | Traffic priority table is used to remark the IP-precedence, DSCP or COS priority of packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. QOS policed service from DSCP mapping table is pre-defined in the hwDscpMapTable in the HUAWEI-LswQos-MIB. Policed service can decide what kind of QOS service the flow should get by the DSCP vlaue in the packets. Policed service includes remarking new DSCP,new EXP,new 802.1p priority,new local precedence and new drop priority. | |
| h3cQoSTrafficPriorityEntry | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1 | not-accessible | ||
| I32 h3cQoSTrafPrioProfIndex | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.1 | Integer32 | not-accessible | The index of QoS profile which the traffic-priority action belongs to. |
| I32 h3cQoSTrafPrioActionIndex | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.2 | Integer32 | not-accessible | The index of traffic-priority action. |
| H3C h3cQoSTrafPrioDirection | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.3 | H3cQoSDirection | read-create | The direction of traffic-priority action. |
| I32 h3cQoSTrafPrioUserAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.4 | Integer32 | read-create | The number of user-based acl group. |
| I32 h3cQoSTrafPrioUserAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.5 | Integer32 | read-create | The subitem of user-based acl rule. |
| I32 h3cQoSTrafPrioIpAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.6 | Integer32 | read-create | The number of Ip-based acl group. |
| I32 h3cQoSTrafPrioIpAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.7 | Integer32 | read-create | The subitem of IP-based acl rule. |
| I32 h3cQoSTrafPrioLinkAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.8 | Integer32 | read-create | The number of Link-based acl group |
| I32 h3cQoSTrafPrioLinkAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.9 | Integer32 | read-create | The subitem of Link-based acl rule. |
| I32 h3cQoSTrafPrioDscp | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.10 | Integer32 | read-create | Set new DSCP value of specifed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking DSCP, then value 255 is returned for get/get-next operation. |
| I32 h3cQoSTrafPrioIpPre | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.11 | Integer32 | read-create | Set Ip precedence value of specifed flow. Ip precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence, then value 255 is returned for get/get-next operation. |
| T/F h3cQoSTrafPrioIpPreFromCos | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.12 | TruthValue | read-create | Set Ip precedence according to vlan priority. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence from COS, then value 2 is returned for get/get-next operation. |
| I32 h3cQoSTrafPrioCos | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.13 | Integer32 | read-create | Set vlan priority of specifed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS, then value 255 is returned for get/get-next operation. |
| T/F h3cQoSTrafPrioCosFromIpPre | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.14 | TruthValue | read-create | Set vlan priority according to IP precedence. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS from Ip precedence, then value 2 is returned for get/get-next operation. |
| I32 h3cQoSTrafPrioLocalPre | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.15 | Integer32 | read-create | Set local precedence of specifed flow. Local precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking local precedence, then value 255 is returned for get/get-next operation. |
| INT h3cQoSTrafPrioPolicedServiceType | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.16 | INTEGER | read-create | The service type of policed Priority. Policed Service is not allowed to be set with remarking DSCP,IpPrecedence,IpPrecedenceFromCOS,COS,COSFromIpPrecedence and LocalPrecedence action simultaneously on the same product. Policed service is user-predefined qos policy parameters. trust-dscp(2) means to decide new police service parameters by the DSCP value in the packets. new-dscp(3) means to decide new police service parameters by the new DSCP value set by the user. And a DSCP mapping table should be pre-defined in the hwDscpMapTable in the HUAWEI-LswQos-MIB. Untrusted(4) means to set all the new DSCP,EXP,COS,Local precedence and Drop priority by the user. |
| I32 h3cQoSTrafPrioPolicedServiceDscp | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.17 | Integer32 | read-create | The service Dscp of policed Priority |
| I32 h3cQoSTrafPrioPolicedServiceExp | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.18 | Integer32 | read-create | The service Exp of policed Priority |
| I32 h3cQoSTrafPrioPolicedServiceCos | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.19 | Integer32 | read-create | The service cos of policed Priority |
| I32 h3cQoSTrafPrioPolicedServiceLoaclPre | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.20 | Integer32 | read-create | The service local pre of policed Priority |
| I32 h3cQoSTrafPrioPolicedServiceDropPriority | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.21 | Integer32 | read-create | The service drop priority of proliced Priority |
| ROW h3cQoSTrafPrioRowStatus | 1.3.6.1.4.1.2011.10.2.17.1.2.2.1.22 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| h3cQoSTrafficFilterTable | 1.3.6.1.4.1.2011.10.2.17.1.2.3 | not-accessible | Traffic filter table is used to deny or permit packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. To deny or permit packets,the ACL rules should be defined in h3cAcl table. The 'deny' or 'permit' action should be defined with ACL rules. In this table,a predefined ACL rules can be referenced in a specified QOS profile group. 'Direction' means the ACL rules can be applied to the inbound or outbound packets. | |
| h3cQoSTrafficFilterEntry | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1 | not-accessible | ||
| I32 h3cQoSTrafFilterProfIndex | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.1 | Integer32 | not-accessible | The index of QoS profile which the traffic-filter action belongs to. |
| I32 h3cQoSTrafFilterActionIndex | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.2 | Integer32 | not-accessible | The index of traffic-filter action. |
| H3C h3cQoSTrafFilterDirection | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.3 | H3cQoSDirection | read-create | The direction of traffic-filter action. |
| I32 h3cQoSTrafFilterUserAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.4 | Integer32 | read-create | The number of user-based acl group. |
| I32 h3cQoSTrafFilterUserAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.5 | Integer32 | read-create | The subitem of user-based acl rule. |
| I32 h3cQoSTrafFilterIpAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.6 | Integer32 | read-create | The number of Ip-based acl group. |
| I32 h3cQoSTrafFilterIpAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.7 | Integer32 | read-create | The subitem of IP-based acl rule. |
| I32 h3cQoSTrafFilterLinkAclNum | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.8 | Integer32 | read-create | The number of Link-based acl group |
| I32 h3cQoSTrafFilterLinkAclRule | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.9 | Integer32 | read-create | The subitem of Link-based acl rule. |
| ROW h3cQoSTrafFilterRowStatus | 1.3.6.1.4.1.2011.10.2.17.1.2.3.1.10 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| h3cQoSProfPortMapping | 1.3.6.1.4.1.2011.10.2.17.1.3 | |||
| h3cQoSProfPortMappingTable | 1.3.6.1.4.1.2011.10.2.17.1.3.1 | not-accessible | Port mapping table is used to apply the qos profile to the port. If a qos profile is applied to the port, then the port will have an entry in the table. | |
| h3cQoSProfPortMappingEntry | 1.3.6.1.4.1.2011.10.2.17.1.3.1.1 | not-accessible | ||
| I32 h3cQoSProfPortMappingIfIndex | 1.3.6.1.4.1.2011.10.2.17.1.3.1.1.1 | Integer32 | not-accessible | The ifindex which the specified QoS profile group is applied to. |
| I32 h3cQoSProfPortMappingProfIndex | 1.3.6.1.4.1.2011.10.2.17.1.3.1.1.2 | Integer32 | not-accessible | The index of specified QoS profile group. |
| ROW h3cQoSProfPortMappingRowStatus | 1.3.6.1.4.1.2011.10.2.17.1.3.1.1.3 | RowStatus | read-create | RowStatus,Now support three state:CreateAndGo,Active,Destroy. |
| h3cQoSProfPortMappingModeTable | 1.3.6.1.4.1.2011.10.2.17.1.3.2 | not-accessible | Port mapping mode table is used to set mapping mode of the port. When a qos profile is applied to a port, the profile can have two working ways: 1)The profile is the same for all the users connected to the port; 2)The profile can be different for different users connected to the port; Port-based mode means the profile is the same for all the users. User-based mode means the profile is different for different users. Default value is port-based. | |
| h3cQoSProfPortMappingModeEntry | 1.3.6.1.4.1.2011.10.2.17.1.3.2.1 | not-accessible | ||
| I32 h3cQoSProfPortMappingModeIfIndex | 1.3.6.1.4.1.2011.10.2.17.1.3.2.1.1 | Integer32 | not-accessible | The ifindex which the QoS profile mapping mode is applied to. |
| INT h3cQoSProfPortMappingMode | 1.3.6.1.4.1.2011.10.2.17.1.3.2.1.2 | INTEGER | read-write | The QoS profile mapping mode of specifed port. |
| h3cQoSProfDynPortMappingTable | 1.3.6.1.4.1.2011.10.2.17.1.3.3 | not-accessible | Dynamic port mapping table is used to get user' port,MAC address,IP address,VLAN ID and user-specified qos profiles. Network managers can allocate different QOS profile groups to different users. Once the user is on line, then the user-specified QOS profiles will be dynamically applied to the port the user connects. Each port can have different groups of users simultaneously connected. Each group of users can have assiociation with multiple QOS profiles simultaneously. So the user's port,MAC address,IP address and VLAN ID will replace the source information in the ACL rules refered in the QOS profiles. Once the user is off line, then the user-specified QOS profiles will be dynamically deleted from the port the user connects. | |
| h3cQoSProfDynPortMappingEntry | 1.3.6.1.4.1.2011.10.2.17.1.3.3.1 | not-accessible | ||
| I32 h3cQoSProfDynPortMappingIfIndex | 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.1 | Integer32 | not-accessible | if index of the port user profile is applied. |
| MAC h3cQoSProfDynPortMappingUserSrcMAC | 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.2 | MacAddress | not-accessible | User sourc MAC address. |
| OCT h3cQoSProfDynPortMappingUserName | 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.3 | OCTET STRING | read-only | User name. |
| IP h3cQoSProfDynPortMappingUserIPAddr | 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.4 | IpAddress | read-only | User IP address |
| I32 h3cQoSProfDynPortMappingUserVLANID | 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.5 | Integer32 | read-only | User VLAN ID. |
| OCT h3cQoSProfDynPortMappingUserProfName | 1.3.6.1.4.1.2011.10.2.17.1.3.3.1.6 | OCTET STRING | read-only | User profile name. |
| h3cQoSProfPortMappingTraps | 1.3.6.1.4.1.2011.10.2.17.2 | |||
| NTF h3cQoSProfPortMappingError | 1.3.6.1.4.1.2011.10.2.17.2.1 | An h3cQoSProfPortMappingError notification is generated when a qos profile fails to be applied on the port. | ||
| h3cQoSProfMibConformance | 1.3.6.1.4.1.2011.10.2.17.3 | |||
| h3cQoSProfMibCompliances | 1.3.6.1.4.1.2011.10.2.17.3.1 | |||
| h3cQoSProfMibCompliance | 1.3.6.1.4.1.2011.10.2.17.3.1.1 | The compliance statement for QoS Profile MIB. | ||
| h3cQoSProfMibGroups | 1.3.6.1.4.1.2011.10.2.17.3.2 | |||
| h3cQoSProfGroup | 1.3.6.1.4.1.2011.10.2.17.3.2.1 | Included table: h3cQoSProfTable. | ||
| h3cQoSActionGroup | 1.3.6.1.4.1.2011.10.2.17.3.2.2 | Included table: 1)h3cQoSTrafficLimitTable. 2)h3cQoSTrafficPriorityTable. 3)h3cQoSTrafficFilterTable | ||
| h3cQoSProfPortMappingGroup | 1.3.6.1.4.1.2011.10.2.17.3.2.3 | Included tables: 1)h3cQoSProfPortMappingTable. 2)h3cQoSProfPortMappingModeTable. 3)h3cQoSProfDynPortMappingTable. | ||
| h3cQoSProfPortMappingTrapsGroup | 1.3.6.1.4.1.2011.10.2.17.3.2.4 | Included: h3cQoSProfPortMappingTraps. |
RFC description
H3C vendor-private MIB for Quality of Service profile management and traffic policy configuration.
Start monitoring H3C router/switch (named QoS rate-limiting profiles) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.