HH3C-PU-MAN-MIB

All MIBs › HH3C-PU-MAN-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2007-09-05

Category: Device Management, Vendor: H3C/HH3C

Description: HH3C MIB for processing unit management providing monitoring of CPU and processing modules on H3C devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-PU-MAN-MIB?

HH3C-PU-MAN-MIB is an H3C proprietary MIB for managing Processing Units (PU) in H3C's video surveillance product line, where a PU refers to devices such as encoders (EC), decoders (DC), and encoder-recorders (ECR) that handle remote video/audio streams. It exposes online/offline status, connections to central management servers, and external alarm input/output channel data. Its monitoring value is squarely on hardware/software operational status: hh3cPUisOnline reports whether a given processing unit is reachable, hh3cPUCMSAddr and hh3cPUVersionServerAddr identify the management/version servers it registers with, and the external alarm tables (hh3cPUExternalInputAlarmTable/hh3cPUExternalOutputAlarmTable) surface physical alarm sensor and output relay states tied to each unit. It has an implicit dependency on H3C's broader video surveillance management framework (a central management server) rather than any IETF standard. It is deployed in video surveillance/security systems where H3C encoders, decoders, and cameras are centrally managed and monitored for connectivity and alarm conditions. Network engineers evaluating or troubleshooting this functionality can download the HH3C-PU-MAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-PU-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C video surveillance encoders/decoders (EC/DC/ECR processing units)

Monitoring Examples

An operator would poll hh3cPUisOnline for each registered processing unit to detect an encoder or decoder that has gone offline, and cross-check hh3cPUCMSAddr to confirm it is registered to the correct management server. The hh3cPUExternalInputAlarmTable (keyed by hh3cPUExternalInputAlarmChannelID) reports hh3cPUExternalInputAlarmStatus for connected sensors such as door contacts, while hh3cPUExternalOutputAlarmStatus reflects the state of output relays like sirens or lights. A count discrepancy in hh3cPUECCameraOnlines versus the expected camera count would flag cameras that have disconnected from their encoder.

What Can Be Monitored

processing unit online/offline status
central management server registration address
external input alarm channel status
external output alarm channel status
connected camera online count

Imported Objects

From HH3C-OID-MIB

hh3cSurveillanceMIB

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cPUDCRcvVideoPackets OID:

Select an H3C video surveillance encoder/decoder (EC/DC/ECR processing units) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cPUDCRcvVideoPackets into the Find box to locate it in the OID tree, then select it and click OK. The total number of video packets which are received from interfaces. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cPUMan	1.3.6.1.4.1.25506.9.2			The PU includes those device like EC(Encoder), DC(Decoder) and ECR(Encoder Recorder). The PU will survey the remote video and audio. This MIB is defined to manage the PU as our private MIB node according to its specific capability.
hh3cPUCommonMan	1.3.6.1.4.1.25506.9.2.1
hh3cPUCommonManObjects	1.3.6.1.4.1.25506.9.2.1.1
T/F hh3cPUisOnline	1.3.6.1.4.1.25506.9.2.1.1.1	TruthValue	read-only	The PU online status indicates whether the PU is normally registered into the VM. True indicates that the PU is normally registered into the VM.
IP hh3cPUCMSAddr	1.3.6.1.4.1.25506.9.2.1.1.2	IpAddress	read-only	The IP address of the CMS. All zero address indicates the CMS address is not configured.
IP hh3cPUVersionServerAddr	1.3.6.1.4.1.25506.9.2.1.1.3	IpAddress	read-only	The IP address of the version server. All zero address indicates the version server is not configured or does not support remote upgrade.
hh3cPUCommonManTables	1.3.6.1.4.1.25506.9.2.1.2
hh3cPUExternalInputAlarmTable	1.3.6.1.4.1.25506.9.2.1.2.1		not-accessible	External input alarm table
hh3cPUExternalInputAlarmEntry	1.3.6.1.4.1.25506.9.2.1.2.1.1		not-accessible	External input alarm entry
U32 hh3cPUExternalInputAlarmChannelID	1.3.6.1.4.1.25506.9.2.1.2.1.1.1	Unsigned32	accessible-for-notify	The ID of the external input alarm channel.
T/F hh3cPUExternalInputAlarmStatus	1.3.6.1.4.1.25506.9.2.1.2.1.1.2	TruthValue	read-only	True indicates that the current channel has alarm.
hh3cPUExternalOutputAlarmTable	1.3.6.1.4.1.25506.9.2.1.2.2		not-accessible	External output alarm table
hh3cPUExternalOutputAlarmEntry	1.3.6.1.4.1.25506.9.2.1.2.2.1		not-accessible	External output alarm entry
U32 hh3cPUExternalOutputAlarmChannelID	1.3.6.1.4.1.25506.9.2.1.2.2.1.1	Unsigned32	accessible-for-notify	The ID of the external output alarm channel
T/F hh3cPUExternalOutputAlarmStatus	1.3.6.1.4.1.25506.9.2.1.2.2.1.2	TruthValue	read-only	True indicates that the current channel has alarm.
hh3cPUECMan	1.3.6.1.4.1.25506.9.2.2
hh3cPUECManObjects	1.3.6.1.4.1.25506.9.2.2.1
U32 hh3cPUECCameraOnlines	1.3.6.1.4.1.25506.9.2.2.1.1	Unsigned32	read-only	Number of online cameras connected to an EC.
U32 hh3cPUECCameraAvailRate	1.3.6.1.4.1.25506.9.2.2.1.2	Unsigned32	read-only	Camera available rate. That is, the ratio of available cameras to total cameras connected to an EC. It ranges from 0 to 100.
hh3cPUECManTables	1.3.6.1.4.1.25506.9.2.2.2
hh3cPUECVideoChannelTable	1.3.6.1.4.1.25506.9.2.2.2.1		not-accessible	Video channel table
hh3cPUECVideoChannelEntry	1.3.6.1.4.1.25506.9.2.2.2.1.1		not-accessible	Video channel entry
U32 hh3cPUECVideoChannelID	1.3.6.1.4.1.25506.9.2.2.2.1.1.1	Unsigned32	accessible-for-notify	The ID of the video channel
STR hh3cPUECVideoChannelName	1.3.6.1.4.1.25506.9.2.2.2.1.1.2	DisplayString	read-only	The name of the video channel. It is suggested that the name includes the channel ID information.
BIT hh3cPUECVideoChannelServiceStatus	1.3.6.1.4.1.25506.9.2.2.2.1.1.3	Bits	read-only	The service status of the video channel. 0 the status is not known. 1 the video is not used or the channel has no signal. 2 the camera is kinescoping. 3 the camera is take snapshot.
hh3cPUECManMIBTrap	1.3.6.1.4.1.25506.9.2.2.3
hh3cPUECManTrapPrex	1.3.6.1.4.1.25506.9.2.2.3.0
NTF hh3cPUECManExternalSemaphoreTrap	1.3.6.1.4.1.25506.9.2.2.3.0.1			Send a trap about external semaphore alarm.
NTF hh3cPUECManVideoLossTrap	1.3.6.1.4.1.25506.9.2.2.3.0.2			Send a trap about video loss. Video loss is that no video signal is inputted to the EC.
NTF hh3cPUECManVideoRecoverTrap	1.3.6.1.4.1.25506.9.2.2.3.0.3			Send a trap about video recovery after loss.
NTF hh3cPUECManMotionDetectTrap	1.3.6.1.4.1.25506.9.2.2.3.0.4			Send a trap about motion detection.
NTF hh3cPUECManOnLineFailureTrap	1.3.6.1.4.1.25506.9.2.2.3.0.5			Send a trap when EC can not register the CMS.
NTF hh3cPUECManConnectionCMSFailureTrap	1.3.6.1.4.1.25506.9.2.2.3.0.6			Send a trap when the connection with the CMS breaks down.
NTF hh3cPUECManConnectionVerSrvFailureTrap	1.3.6.1.4.1.25506.9.2.2.3.0.7			Send a trap when the connection with the version server breaks down or can not create.
NTF hh3cPUECManFlashFailureTrap	1.3.6.1.4.1.25506.9.2.2.3.0.8			Send a trap about flash failure.
NTF hh3cPUECManCameraShelterTrap	1.3.6.1.4.1.25506.9.2.2.3.0.9			Send a trap when a camera is sheltered.
hh3cPUECManTrapObjects	1.3.6.1.4.1.25506.9.2.2.3.1
U32 hh3cPUECRegionCoordinateX1	1.3.6.1.4.1.25506.9.2.2.3.1.1	Unsigned32	accessible-for-notify	The horizontal coordinate of top left point of the motion detection region.
U32 hh3cPUECRegionCoordinateY1	1.3.6.1.4.1.25506.9.2.2.3.1.2	Unsigned32	accessible-for-notify	The vertical coordinate of top left point of the motion detection region.
U32 hh3cPUECRegionCoordinateX2	1.3.6.1.4.1.25506.9.2.2.3.1.3	Unsigned32	accessible-for-notify	The horizontal coordinate of botton right point of the motion detection region.
U32 hh3cPUECRegionCoordinateY2	1.3.6.1.4.1.25506.9.2.2.3.1.4	Unsigned32	accessible-for-notify	The horizontal coordinate of botton right point of the motion detection region.
hh3cPUDCMan	1.3.6.1.4.1.25506.9.2.3
hh3cPUDCManObjects	1.3.6.1.4.1.25506.9.2.3.1
C32 hh3cPUDCRcvVideoPacketsEx	1.3.6.1.4.1.25506.9.2.3.1.1	Counter32	read-only	The total number of video packets which are received from interfaces.
C32 hh3cPUDCRcvVideoRefFrames	1.3.6.1.4.1.25506.9.2.3.1.2	Counter32	read-only	The total number of video reference frames which are received from interfaces.
C32 hh3cPUDCVideoPacketsLoss	1.3.6.1.4.1.25506.9.2.3.1.3	Counter32	read-only	The total number of lost video packets.
C32 hh3cPUDCVideoRefFramesLoss	1.3.6.1.4.1.25506.9.2.3.1.4	Counter32	read-only	The total number of lost video reference frames.

RFC description

Processing Unit (Encoder/Decoder/Recorder) management for H3C surveillance and video systems.

Start monitoring H3C video surveillance encoder/decoder (EC/DC/ECR processing units) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-PU-MAN-MIB