All MIBs › ME1200-ICFG-MIB › me1200IcfgControlCopyConfigDestinationConfigFile
me1200IcfgControlCopyConfigDestinationConfigFile
Module: ME1200-ICFG-MIB
OID (symbolic): ME1200-ICFG-MIB::me1200IcfgControlCopyConfigDestinationConfigFile
OID (numeric): 1.3.6.1.4.1.9.9.815.1.101.1.4.2.5
Node type: OBJECT-TYPE
Type: ME1200DisplayString
Access: read-write
Description: Destination configuration file. If the configuration file is in flash then the format is flash:filename. If the configuration file is from tftp then the format is tftp://server[:port]/filename_with_path. Where 'default-config' is read-only and not allowed to be deleted.
What is me1200IcfgControlCopyConfigDestinationConfigFile?
This read-write ME1200DisplayString (up to 127 characters) specifies the destination configuration file for a copy operation, using flash:filename for local files or tftp://server[:port]/filename_with_path for remote TFTP files, with the default-config file protected from being overwritten via deletion. An admin sets this to name where a configuration backup or restore operation should write its output. Setting this to "flash:backup-2026-08-24.cfg" configures the copy operation to save its output under that filename in flash.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.101.1.4.2.5 snmpwalk -v2c -c public <target> ME1200-ICFG-MIB::me1200IcfgControlCopyConfigDestinationConfigFile
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.101.1.4.2.5.1 snmpget -v2c -c public <target> ME1200-ICFG-MIB::me1200IcfgControlCopyConfigDestinationConfigFile.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.815.1.101.1.4.2.5.1 s <value>
Start monitoring Cisco ME1200 Metro Ethernet access switch (configuration-file management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-ICFG-MIB::me1200IcfgControlCopyConfigDestinationConfigFile OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Metro Ethernet access switch (configuration-file management) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.101 | me1200IcfgMIB | ME1200-ICFG-MIB |
| 1.3.6.1.4.1.9.9.815.1.101.1 | me1200IcfgMIBObjects | ME1200-ICFG-MIB |
| 1.3.6.1.4.1.9.9.815.1.101.1.4 | me1200IcfgControl | ME1200-ICFG-MIB |
| 1.3.6.1.4.1.9.9.815.1.101.1.4.2 | me1200IcfgControlCopyConfig | ME1200-ICFG-MIB |
| 1.3.6.1.4.1.9.9.815.1.101.1.4.2.5 | me1200IcfgControlCopyConfigDestinationConfigFile | ME1200-ICFG-MIB |