H3C-VM-MAN-MIB

All MIBs › H3C-VM-MAN-MIB

Organization: H3C Technologies Co., Ltd.

Last Updated: 2007-04-13

Category: Device Management, Vendor: H3C/HH3C

Description: H3C MIB for virtual machine management monitoring VM status, resource allocation, and hypervisor configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-VM-MAN-MIB?

H3C-VM-MAN-MIB is a vendor-specific MIB from H3C for managing the Voice Media/VM feature used in video surveillance systems, covering user authentication, configuration management, network management, and control-signaling forwarding between surveillance devices. It exposes capability flags, connection-establishment and connection-release statistics (total, successful, and failed), abnormal termination counts, and registered device information such as IP addresses, names, and region coordinates. This MIB is centrally used to monitor the software/service health of the VM signaling function, particularly whether connection setup and teardown requests are succeeding or failing, which directly reflects the reliability of the surveillance control-signaling path. It is a private H3C MIB belonging to the same surveillance-focused family as H3C-PU-MAN-MIB, without dependency on IETF standards. It is typically deployed in H3C IP video surveillance platforms managing IPSAN storage and regional device registration across distributed camera sites. Engineers can download the H3C-VM-MAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-VM-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C IP video surveillance platforms
H3C VM signaling servers

Monitoring Examples

An administrator would compare h3cVMStatTotalConnEstablishRequests against h3cVMStatSuccConnEstablishRequests and h3cVMStatFailConnEstablishRequests to compute a connection success rate for the signaling path, and similarly track h3cVMStatTotalConnReleaseRequests versus h3cVMStatSuccConnReleaseRequests/h3cVMStatFailConnReleaseRequests for teardown reliability. A rising h3cVMStatExceptionTerminationConn count would flag abnormal session terminations pointing to network instability or device faults. The h3cVMManRegDevIP and h3cVMManRegDevName objects let an operator confirm which devices are registered in a given surveillance region, while h3cVMManIPSANDevIP identifies the storage target. A sudden spike in failed establish requests combined with high exception terminations would indicate the VM signaling service is degraded.

What Can Be Monitored

connection establish success/failure counts
connection release success/failure counts
abnormal termination count
registered device IP and name
IPSAN storage device address

Imported Objects

From ENTITY-MIB

entPhysicalAssetID

OBJECT-TYPE

From HUAWEI-3COM-OID-MIB

h3cSurveillanceMIB

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString

How to Use in IPNetwork Monitor

Example using h3cVMStatTotalConnEstablishRequests OID:

Select an H3C video surveillance platform or signaling server as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cVMStatTotalConnEstablishRequests into the Find box to locate it in the OID tree, then select it and click OK. The total number of establishment requests for video connection. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cVMMan	1.3.6.1.4.1.2011.10.9.1			VM is one of surveillance features, implementing user authentication, configuration management, network management and control signalling forwarding. This MIB contains objects to manage the VM feature.
h3cVMManMIBObjects	1.3.6.1.4.1.2011.10.9.1.1
BIT h3cVMCapabilitySet	1.3.6.1.4.1.2011.10.9.1.1.1	Bits	read-only	Components included in the VM feature represented by bit fields. VM feature includes three componets: CMS(Central Management Server), CSS(Control Signalling Server) and DM(Data Managment). A bit set to 1 indicates the corresponding component of this bit is included otherwise indicates the corresponding component of this bit is not included. VM can include one or more components at one time.
h3cVMStat	1.3.6.1.4.1.2011.10.9.1.1.2
C32 h3cVMStatTotalConnEstablishRequestsEx	1.3.6.1.4.1.2011.10.9.1.1.2.1	Counter32	read-only	The total number of establishment requests for video connection.
C32 h3cVMStatSuccConnEstablishRequests	1.3.6.1.4.1.2011.10.9.1.1.2.2	Counter32	read-only	The total number of successful establishment requests for video connection.
C32 h3cVMStatFailConnEstablishRequests	1.3.6.1.4.1.2011.10.9.1.1.2.3	Counter32	read-only	The total number of unsuccessful establishment requests for video connection.
C32 h3cVMStatTotalConnReleaseRequests	1.3.6.1.4.1.2011.10.9.1.1.2.4	Counter32	read-only	The total number of release requests for video connection.
C32 h3cVMStatSuccConnReleaseRequests	1.3.6.1.4.1.2011.10.9.1.1.2.5	Counter32	read-only	The total number of successful release requests for video connection.
C32 h3cVMStatFailConnReleaseRequests	1.3.6.1.4.1.2011.10.9.1.1.2.6	Counter32	read-only	The total number of unsuccessful release requests for video connection.
C32 h3cVMStatExceptionTerminationConn	1.3.6.1.4.1.2011.10.9.1.1.2.7	Counter32	read-only	The total number of exceptional termination for video connection.
h3cVMManMIBTrap	1.3.6.1.4.1.2011.10.9.1.2
h3cVMManTrapPrex	1.3.6.1.4.1.2011.10.9.1.2.0
NTF h3cVMManDeviceOnlineTrap	1.3.6.1.4.1.2011.10.9.1.2.0.1			Send a trap about the device having been registered to VM.
NTF h3cVMManDeviceOfflineTrap	1.3.6.1.4.1.2011.10.9.1.2.0.2			Send a trap about the device having been unregistered to VM.
NTF h3cVMManForwardDeviceExternalSemaphoreTrap	1.3.6.1.4.1.2011.10.9.1.2.0.3			Forward a trap about external semaphore alarm, which is created by the third party device.
NTF h3cVMManForwardDeviceVideoLossTrap	1.3.6.1.4.1.2011.10.9.1.2.0.4			Forward a trap about video loss, which is created by the third party device.
NTF h3cVMManForwardDeviceVideoRecoverTrap	1.3.6.1.4.1.2011.10.9.1.2.0.5			Forward a trap about video recovery after loss, which is created by the third party device.
NTF h3cVMManForwardDeviceMotionDetectTrap	1.3.6.1.4.1.2011.10.9.1.2.0.6			Forward a trap about motion detection, which is created by the third party device.
NTF h3cVMManForwardDeviceCoverTrap	1.3.6.1.4.1.2011.10.9.1.2.0.7			Forward a trap about video cover, which is created by the third party device.
NTF h3cVMManForwardDeviceCpuUsageThresholdTrap	1.3.6.1.4.1.2011.10.9.1.2.0.8			Forward a trap about cpu usage exceeding its threshold, which is created by the third party device.
NTF h3cVMManForwardDeviceMemUsageThresholdTrap	1.3.6.1.4.1.2011.10.9.1.2.0.9			Forward a trap about memory usage exceeding its threshold, which is created by the third party device.
NTF h3cVMManForwardDeviceHardDiskUsageThresholdTrap	1.3.6.1.4.1.2011.10.9.1.2.0.10			Forward a trap about harddisk usage exceeding its threshold, which is created by the third party device.
NTF h3cVMManForwardDeviceTemperatureThresholdTrap	1.3.6.1.4.1.2011.10.9.1.2.0.11			Forward a trap about temperature exceeding its threshold, which is created by the third party device.
NTF h3cVMManForwardDeviceStartKinescopeTrap	1.3.6.1.4.1.2011.10.9.1.2.0.12			Forward a trap about starting kinescope, which is created by the third party device.
NTF h3cVMManForwardDeviceStopKinescopeTrap	1.3.6.1.4.1.2011.10.9.1.2.0.13			Forward a trap about stopping kinescope, which is created by the third party device.
NTF h3cVMManClientReportTrap	1.3.6.1.4.1.2011.10.9.1.2.0.14			Send a trap about the fault which is reported by clients.
NTF h3cVMManClientRealtimeSurveillanceNoVideoTrap	1.3.6.1.4.1.2011.10.9.1.2.0.15			Send a trap about no realtime surveillance video stream which is reported by clients. h3cVMManRegDevIP, entPhysicalAssetID, h3cVMManRegDevName and h3cVMManPUECVideoChannelName describe an EC's relative information.
NTF h3cVMManClientVODNoVideoTrap	1.3.6.1.4.1.2011.10.9.1.2.0.16			Send a trap about no VOD video stream which is reported by clients. h3cVMManRegDevIP, entPhysicalAssetID, h3cVMManRegDevName and h3cVMManPUECVideoChannelName describe an EC's relative information.
NTF h3cVMManClientRealtimeSurveillanceVideoStreamDiscontinuityTrap	1.3.6.1.4.1.2011.10.9.1.2.0.17			Send a trap about the realtime surveillance video stream discontinuity which is reported by clients. entPhysicalAssetID, h3cVMManRegDevIP, h3cVMManRegDevName and h3cVMManPUECVideoChannelName describe an EC's relative information.
NTF h3cVMManClientVODVideoStreamDiscontinuityTrap	1.3.6.1.4.1.2011.10.9.1.2.0.18			Send a trap about the VOD video stream discontinuity which is reported by clients. h3cVMManRegDevIP, entPhysicalAssetID, h3cVMManRegDevName and h3cVMManPUECVideoChannelName describe an EC's relative information.
NTF h3cVMManClientCtlConnExceptionTerminationTrap	1.3.6.1.4.1.2011.10.9.1.2.0.19			Send a trap about the exceptional termination for control connection.
NTF h3cVMManClientFrequencyLoginFailTrap	1.3.6.1.4.1.2011.10.9.1.2.0.20			Send a trap about the frequency of client login failure.
NTF h3cVMManClientFrequencyVODFailTrap	1.3.6.1.4.1.2011.10.9.1.2.0.21			Send a trap about the frequency of client VOD failure.
NTF h3cVMManDMECDisobeyStorageScheduleTrap	1.3.6.1.4.1.2011.10.9.1.2.0.22			Send a trap about EC disobeying storage schedule created by DM.
NTF h3cVMManDMECDisobeyStorageScheduleRecoverTrap	1.3.6.1.4.1.2011.10.9.1.2.0.23			Send a trap about recovery after EC disobeying storage schedule created by DM.
h3cVMManTrapObjects	1.3.6.1.4.1.2011.10.9.1.2.1
IP h3cVMManIPSANDevIP	1.3.6.1.4.1.2011.10.9.1.2.1.1	IpAddress	accessible-for-notify	IP address of IPSAN Device which can store video data.
IP h3cVMManRegDevIP	1.3.6.1.4.1.2011.10.9.1.2.1.2	IpAddress	accessible-for-notify	IP address of devices which can registered or unregistered to VM.
STR h3cVMManRegDevName	1.3.6.1.4.1.2011.10.9.1.2.1.3	DisplayString	accessible-for-notify	Name of devices which can registered or unregistered to VM.
U32 h3cVMManRegionCoordinateX1	1.3.6.1.4.1.2011.10.9.1.2.1.4	Unsigned32	accessible-for-notify	The horizontal coordinate of top left point of the motion detection region.
U32 h3cVMManRegionCoordinateY1	1.3.6.1.4.1.2011.10.9.1.2.1.5	Unsigned32	accessible-for-notify	The vertical coordinate of top left point of the motion detection region.
U32 h3cVMManRegionCoordinateX2	1.3.6.1.4.1.2011.10.9.1.2.1.6	Unsigned32	accessible-for-notify	The horizontal coordinate of botton right point of the motion detection region.
U32 h3cVMManRegionCoordinateY2	1.3.6.1.4.1.2011.10.9.1.2.1.7	Unsigned32	accessible-for-notify	The horizontal coordinate of botton right point of the motion detection region.
U32 h3cVMManCpuUsage	1.3.6.1.4.1.2011.10.9.1.2.1.8	Unsigned32	accessible-for-notify	The CPU usage for this entity. Generally, the CPU usage will caculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity.
U32 h3cVMManCpuUsageThreshold	1.3.6.1.4.1.2011.10.9.1.2.1.9	Unsigned32	accessible-for-notify	The threshold for the CPU usage. When the CPU usage exceeds the threshold, a notification will be sent.
U32 h3cVMManMemUsage	1.3.6.1.4.1.2011.10.9.1.2.1.10	Unsigned32	accessible-for-notify	The memory usage for the entity. This object indicates what percent of memory are used.
U32 h3cVMManMemUsageThreshold	1.3.6.1.4.1.2011.10.9.1.2.1.11	Unsigned32	accessible-for-notify	The threshold for the Memory usage. When the memory usage exceeds the threshold, a notification will be sent.
U32 h3cVMManHardDiskUsage	1.3.6.1.4.1.2011.10.9.1.2.1.12	Unsigned32	accessible-for-notify	The hard disk usage for the entity. This object indicates what percent of hard disk are used.
U32 h3cVMManHardDiskUsageThreshold	1.3.6.1.4.1.2011.10.9.1.2.1.13	Unsigned32	accessible-for-notify	The threshold for the hard disk usage. When the hard disk usage exceeds the threshold, a notification will be sent.
I32 h3cVMManTemperature	1.3.6.1.4.1.2011.10.9.1.2.1.14	Integer32	accessible-for-notify	The temperature for the entity.
I32 h3cVMManTemperatureThreshold	1.3.6.1.4.1.2011.10.9.1.2.1.15	Integer32	accessible-for-notify	The threshold for the temperature. When the temperature exceeds the threshold, a notification will be sent.
IP h3cVMManClientIP	1.3.6.1.4.1.2011.10.9.1.2.1.16	IpAddress	accessible-for-notify	The client device IP address.
STR h3cVMManUserName	1.3.6.1.4.1.2011.10.9.1.2.1.17	DisplayString	accessible-for-notify	The client user name.
STR h3cVMManReportContent	1.3.6.1.4.1.2011.10.9.1.2.1.18	DisplayString	accessible-for-notify	The details of the fault which reported by clients
U32 h3cVMManClientVideoStreamDiscontinuityInterval	1.3.6.1.4.1.2011.10.9.1.2.1.19	Unsigned32	accessible-for-notify	Video stream discontinuity interval.
U32 h3cVMManClientVideoStreamDiscontinuityIntervalThreshold	1.3.6.1.4.1.2011.10.9.1.2.1.20	Unsigned32	accessible-for-notify	The threshold for the video stream discontinuity interval. When the discontinuity interval exceeds the threshold, a notification will be sent.
U32 h3cVMManClientStatPeriod	1.3.6.1.4.1.2011.10.9.1.2.1.21	Unsigned32	accessible-for-notify	The client statistic period.
U32 h3cVMManClientLoginFailNum	1.3.6.1.4.1.2011.10.9.1.2.1.22	Unsigned32	accessible-for-notify	The total number of client login failure in last statistic period which is defined by h3cVMManClientStatPeriod entity.
U32 h3cVMManClientLoginFailNumThreshold	1.3.6.1.4.1.2011.10.9.1.2.1.23	Unsigned32	accessible-for-notify	The threshold for the total number of client login failure in last statistic period. When the number exceeds the threshold, a notification will be sent.
U32 h3cVMManClientVODFailNum	1.3.6.1.4.1.2011.10.9.1.2.1.24	Unsigned32	accessible-for-notify	The total number of client VOD failure in last statistic period which is defined by h3cVMManClientStatPeriod entity.
U32 h3cVMManClientVODFailNumThreshold	1.3.6.1.4.1.2011.10.9.1.2.1.25	Unsigned32	accessible-for-notify	The threshold for the total number of client VOD failure in last statistic period. When the number exceeds the threshold, a notification will be sent.
DAT h3cVMManClientVODStart	1.3.6.1.4.1.2011.10.9.1.2.1.26	DateAndTime	accessible-for-notify	The start time for VOD.
DAT h3cVMManClientVODEnd	1.3.6.1.4.1.2011.10.9.1.2.1.27	DateAndTime	accessible-for-notify	The end time for VOD.
U32 h3cVMManPUExternalInputAlarmChannelID	1.3.6.1.4.1.2011.10.9.1.2.1.28	Unsigned32	accessible-for-notify	The ID of the external input alarm channel.
STR h3cVMManPUECVideoChannelName	1.3.6.1.4.1.2011.10.9.1.2.1.29	DisplayString	accessible-for-notify	The name of the video channel. It is suggested that the name includes the channel ID information.

RFC description

H3C (Huawei 3Com) virtual machine management MIB; monitors and manages VM resources and lifecycle.

Start monitoring H3C video surveillance platforms and signaling servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-VM-MAN-MIB