LUM-SYSTEM-MIB

All MIBs › LUM-SYSTEM-MIB

Organization: Infinera Corporation

Last Updated: 2019-03-29

Category: Hardware Inventory

Description: Manages system-level configuration and control on Infinera optical transport nodes.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LUM-SYSTEM-MIB?

This is an Infinera (LUM/Coriant lineage) private MIB managing system-level configuration on optical transport network elements, covering general node parameters, date/time, licensing, and authentication configuration. It exposes data on node identity (name, contact, location), configuration change tracking, login/session records, and RADIUS/TACACS+ authentication settings. While primarily a configuration and administrative MIB, it supports hardware/software status monitoring through objects like sysGeneralLastChangeTime and sysGeneralConfigLastChangeTime, which reveal when the node's software configuration was last modified, and sysGeneralLoginRecords/sysGeneralUserTableSize, which track operator access to the node. Because it governs authentication and licensing on a transport platform, it is commonly used alongside Infinera's chassis, alarm, and interface MIBs to give a complete picture of node health. It is deployed on optical transport nodes in carrier and enterprise backbone networks where operators need centralized visibility into node configuration state and access control. Engineers can download the LUM-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LUM-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Infinera optical transport network node

Monitoring Examples

An operator could poll sysGeneralConfigLastChangeTime after a maintenance window to confirm a configuration push was applied, and compare it against sysGeneralLastChangeTime to detect drift between config and general system state. sysGeneralLoginRecords lets security teams audit who accessed the node's CLI or management interface and when. sysNodeName and sysNodeLocation are typically cross-referenced in inventory systems to map SNMP alerts back to a physical site in the transport network.

What Can Be Monitored

node name, contact, and location
configuration last-change timestamp
login/session records
user table size
RADIUS/TACACS+ authentication configuration
license information

Imported Objects

From LUM-REG

lumModules	OBJECT-IDENTITY
lumSystemMIB	OBJECT-IDENTITY

From LUM-TC

CommandString
EnableDisable
FaultStatus
OnOff
Platform

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TestAndIncr

OIDs

OID symbolic	OID numeric	Type	Access	Description
lumSystemMIBModule	1.3.6.1.4.1.8708.1.1.4			The system MIB. - General - Node parameters - Date and time - License information - RADIUS and TACACS+ authentication configuration - User information
lumSystemConfs	1.3.6.1.4.1.8708.2.2.1
lumSystemGroups	1.3.6.1.4.1.8708.2.2.1.1
sysGeneralGroup	1.3.6.1.4.1.8708.2.2.1.1.1			The general system MIB objects.
sysNodeGroup	1.3.6.1.4.1.8708.2.2.1.1.2			The node properties objects.
sysHostListGroup	1.3.6.1.4.1.8708.2.2.1.1.3			The host name table.
sysTimeGroup	1.3.6.1.4.1.8708.2.2.1.1.4			The node time properties.
sysLogListGroup	1.3.6.1.4.1.8708.2.2.1.1.5			Log configuration directives.
sysGeneralGroupV2	1.3.6.1.4.1.8708.2.2.1.1.6			The general system MIB objects v2.
sysNodeGroupV2	1.3.6.1.4.1.8708.2.2.1.1.7			The node properties objects V2.
sysUserGroup	1.3.6.1.4.1.8708.2.2.1.1.8			The user table objects.
sysNodeGroupV3	1.3.6.1.4.1.8708.2.2.1.1.9			The node properties objects V3.
sysGeneralGroupV3	1.3.6.1.4.1.8708.2.2.1.1.10			The general system MIB objects v3.
sysNodeGroupV4	1.3.6.1.4.1.8708.2.2.1.1.11			The node properties objects V4.
sysGeneralGroupV4	1.3.6.1.4.1.8708.2.2.1.1.12			The general system MIB objects v4.
sysNodeGroupV5	1.3.6.1.4.1.8708.2.2.1.1.15			The node properties objects V5.
sysRadiusGroup	1.3.6.1.4.1.8708.2.2.1.1.16			The RADIUS MIB objects.
sysNodeGroupV6	1.3.6.1.4.1.8708.2.2.1.1.17			The node properties objects V6.
sysTimeGroupV2	1.3.6.1.4.1.8708.2.2.1.1.18			The node time properties V2.
sysLicenseGroup	1.3.6.1.4.1.8708.2.2.1.1.19			The node license properties V1.
sysTacacsGroup	1.3.6.1.4.1.8708.2.2.1.1.20			The TACACS+ MIB objects.
sysUserGroupV2	1.3.6.1.4.1.8708.2.2.1.1.21			The user table objects v2.
sysGeneralGroupV5	1.3.6.1.4.1.8708.2.2.1.1.22			The general system MIB objects v5.
sysUserGroupV3	1.3.6.1.4.1.8708.2.2.1.1.23			The user table objects v3.
sysTacacsGroupV2	1.3.6.1.4.1.8708.2.2.1.1.24			The TACACS+ MIB objects v2.
sysGeneralGroupV6	1.3.6.1.4.1.8708.2.2.1.1.25			The general system MIB objects v6.
sysUserGroupV4	1.3.6.1.4.1.8708.2.2.1.1.26			The user table objects v4.
sysSecurityGroupV1	1.3.6.1.4.1.8708.2.2.1.1.27			The security group objects v1 (7.0).
sysNodeGroupV7	1.3.6.1.4.1.8708.2.2.1.1.28			The node properties objects V7.
sysTacacsGroupV3	1.3.6.1.4.1.8708.2.2.1.1.29			The TACACS+ MIB objects v3.
sysRadiusGroupV2	1.3.6.1.4.1.8708.2.2.1.1.30			The RADIUS MIB objects.
sysTimeGroupV3	1.3.6.1.4.1.8708.2.2.1.1.31			The node time properties V3.
sysSecurityGroupV2	1.3.6.1.4.1.8708.2.2.1.1.32			The security group objects v2 (12.0).
sysRadiusGroupV3	1.3.6.1.4.1.8708.2.2.1.1.33			The RADIUS MIB objects V3.
sysRadiusGroupV4	1.3.6.1.4.1.8708.2.2.1.1.34			The RADIUS MIB objects V4.
sysGeneralGroupV7	1.3.6.1.4.1.8708.2.2.1.1.35			The general system MIB objects v7.
sysSecurityGroupV3	1.3.6.1.4.1.8708.2.2.1.1.36			The security group objects v3 (27.0).
sysNodeGroupV8	1.3.6.1.4.1.8708.2.2.1.1.37			The node properties objects V8 (28.0).
sysSecurityGroupV4	1.3.6.1.4.1.8708.2.2.1.1.38			The security group objects v4 (29.0).
sysSecurityGroupV5	1.3.6.1.4.1.8708.2.2.1.1.39			The security group objects v5 (30.0).
sysSecurityGroupV6	1.3.6.1.4.1.8708.2.2.1.1.40			The security group objects v6 (32.0).
sysManagerGroupV1	1.3.6.1.4.1.8708.2.2.1.1.41			The manager group objects v1 (32.0).
sysLoginBannerGroupV1	1.3.6.1.4.1.8708.2.2.1.1.42			The loginBanner group objects v1 (32.1).
sysManagerGroupV2	1.3.6.1.4.1.8708.2.2.1.1.43			The manager group objects v2 (32.1).
lumSystemCompl	1.3.6.1.4.1.8708.2.2.1.2
lumSystemBasicComplV1	1.3.6.1.4.1.8708.2.2.1.2.1			Basic implementation requirements for the system MIB V1.
lumSystemBasicComplV2	1.3.6.1.4.1.8708.2.2.1.2.2			Basic implementation requirements for the system MIB V2.
lumSystemBasicComplV3	1.3.6.1.4.1.8708.2.2.1.2.3			Basic implementation requirements for the system MIB V3.
lumSystemBasicComplV4	1.3.6.1.4.1.8708.2.2.1.2.4			Basic implementation requirements for the system MIB V4.
lumSystemBasicComplV5	1.3.6.1.4.1.8708.2.2.1.2.5			Basic implementation requirements for the system MIB V5.
lumSystemBasicComplV6	1.3.6.1.4.1.8708.2.2.1.2.6			Basic implementation requirements for the system MIB V6.
lumSystemBasicComplV7	1.3.6.1.4.1.8708.2.2.1.2.7			Basic implementation requirements for the system MIB V7.
lumSystemBasicComplV8	1.3.6.1.4.1.8708.2.2.1.2.8			Basic implementation requirements for the system MIB V8.
lumSystemBasicComplV9	1.3.6.1.4.1.8708.2.2.1.2.9			Basic implementation requirements for the system MIB V9.
lumSystemBasicComplV10	1.3.6.1.4.1.8708.2.2.1.2.10			Basic implementation requirements for the system MIB V10 (2.2).
lumSystemBasicComplV11	1.3.6.1.4.1.8708.2.2.1.2.11			Basic implementation requirements for the system MIB V11.
lumSystemBasicComplV12	1.3.6.1.4.1.8708.2.2.1.2.12			Basic implementation requirements for the system MIB V12.
lumSystemBasicComplV13	1.3.6.1.4.1.8708.2.2.1.2.13			Basic implementation requirements for the system MIB V13.
lumSystemBasicComplV14	1.3.6.1.4.1.8708.2.2.1.2.14			Basic implementation requirements for the system MIB V14.
lumSystemBasicComplV15	1.3.6.1.4.1.8708.2.2.1.2.15			Basic implementation requirements for the system MIB V15 (4.0).
lumSystemBasicComplV16	1.3.6.1.4.1.8708.2.2.1.2.16			Basic implementation requirements for the system MIB V16 (7.0).
lumSystemBasicComplV17	1.3.6.1.4.1.8708.2.2.1.2.17			Basic implementation requirements for the system MIB V17 (10.0).
lumSystemBasicComplV18	1.3.6.1.4.1.8708.2.2.1.2.18			Basic implementation requirements for the system MIB V18 (11.0).
lumSystemBasicComplV19	1.3.6.1.4.1.8708.2.2.1.2.19			Basic implementation requirements for the system MIB V19 (12.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV20	1.3.6.1.4.1.8708.2.2.1.2.20			Basic implementation requirements for the system MIB V20 (13.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV21	1.3.6.1.4.1.8708.2.2.1.2.21			Basic implementation requirements for the system MIB V21 (13.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV22	1.3.6.1.4.1.8708.2.2.1.2.22			Basic implementation requirements for the system MIB V22 (23.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV23	1.3.6.1.4.1.8708.2.2.1.2.23			Basic implementation requirements for the system MIB V23 (28.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV24	1.3.6.1.4.1.8708.2.2.1.2.24			Basic implementation requirements for the system MIB V24 (29.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV25	1.3.6.1.4.1.8708.2.2.1.2.25			Basic implementation requirements for the system MIB V25 (30.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV26	1.3.6.1.4.1.8708.2.2.1.2.26			Basic implementation requirements for the system MIB V26 (30.1). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV27	1.3.6.1.4.1.8708.2.2.1.2.27			Basic implementation requirements for the system MIB V27 (32.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV28	1.3.6.1.4.1.8708.2.2.1.2.28			Basic implementation requirements for the system MIB V28 (32.0). Used to indicate web-server less vulnerable to hanging.
lumSystemBasicComplV29	1.3.6.1.4.1.8708.2.2.1.2.29			Basic implementation requirements for the system MIB V29 (32.1). Used to indicate web-server less vulnerable to hanging.
lumSystemMinimalGroups	1.3.6.1.4.1.8708.2.2.1.3
sysGeneralMinimalGroupV1	1.3.6.1.4.1.8708.2.2.1.3.1			The minimal general system MIB objects v1.
sysNodeMinimalGroupV1	1.3.6.1.4.1.8708.2.2.1.3.2			The minimal node properties objects v1.
sysTimeMinimalGroupV1	1.3.6.1.4.1.8708.2.2.1.3.3			The minimal node time properties v1.
sysNodeMinimalGroupV2	1.3.6.1.4.1.8708.2.2.1.3.4			The minimal node properties objects v2.
sysTimeMinimalGroupV2	1.3.6.1.4.1.8708.2.2.1.3.5			The minimal node time properties v2.
sysRadiusMinimalGroupV1	1.3.6.1.4.1.8708.2.2.1.3.6			The minimal node RADIUS MIB objects v1.
sysTimeMinimalGroupV3	1.3.6.1.4.1.8708.2.2.1.3.7			The minimal node time properties v3.
sysRadiusMinimalGroupV2	1.3.6.1.4.1.8708.2.2.1.3.8			The minimal node RADIUS MIB objects v2.
sysRadiusMinimalGroupV3	1.3.6.1.4.1.8708.2.2.1.3.9			The minimal node RADIUS MIB objects v3.
sysRadiusMinimalGroupV4	1.3.6.1.4.1.8708.2.2.1.3.10			The minimal node RADIUS MIB objects v4.
lumSystemMinimalCompl	1.3.6.1.4.1.8708.2.2.1.4
lumSystemMinimalComplV1	1.3.6.1.4.1.8708.2.2.1.4.1			Minimal implementation requirements for the system MIB V1.
lumSystemMinimalComplV2	1.3.6.1.4.1.8708.2.2.1.4.2			Minimal implementation requirements for the system MIB V2.
lumSystemMinimalComplV3	1.3.6.1.4.1.8708.2.2.1.4.3			Minimal implementation requirements for the system MIB V3.
lumSystemMinimalComplV4	1.3.6.1.4.1.8708.2.2.1.4.4			Minimal implementation requirements for the system MIB V4.
lumSystemMinimalComplV5	1.3.6.1.4.1.8708.2.2.1.4.5			Minimal implementation requirements for the system MIB V5.
lumSystemMinimalComplV6	1.3.6.1.4.1.8708.2.2.1.4.6			Minimal implementation requirements for the system MIB V6.
lumSystemMinimalComplV7	1.3.6.1.4.1.8708.2.2.1.4.7			Minimal implementation requirements for the system MIB V7 (30.1).
lumSystemMIBObjects	1.3.6.1.4.1.8708.2.2.2
sysGeneral	1.3.6.1.4.1.8708.2.2.2.1
TES sysGeneralTestAndIncr	1.3.6.1.4.1.8708.2.2.2.1.1	TestAndIncr	read-write	Protection against simultaneous access from multiple managers. See SNMPv2-TC.
STR sysGeneralMibSpecVersion	1.3.6.1.4.1.8708.2.2.2.1.2	DisplayString	read-write	The MIB specification version.
STR sysGeneralMibImplVersion	1.3.6.1.4.1.8708.2.2.2.1.3	DisplayString	read-write	The MIB implementation version.
DAT sysGeneralLastChangeTime	1.3.6.1.4.1.8708.2.2.2.1.4	DateAndTime	read-only	The time the state of MIB last changed.
I32 sysGeneralTest	1.3.6.1.4.1.8708.2.2.2.1.5	Integer32	read-write	Object that can be used to verify write access (via SNMP). This attribute can be written via SNMP.
DAT sysGeneralConfigLastChangeTime	1.3.6.1.4.1.8708.2.2.2.1.6	DateAndTime	read-only	The time the configuration of the MIB last changed.
INT sysGeneralLoginRecords	1.3.6.1.4.1.8708.2.2.2.1.7	INTEGER	read-write	Enable/disable login records. The log can be viewed with the 'last' command. off - Login records log disabled. on - Login records log enable.
U32 sysGeneralUserTableSize	1.3.6.1.4.1.8708.2.2.2.1.8	Unsigned32	read-only	Number of rows available in the user table.
STR sysGeneralWriteTest	1.3.6.1.4.1.8708.2.2.2.1.9	DisplayString	read-write	Object that can be used to verify write access (via SNMP). This attribute can be written via SNMP.
sysNode	1.3.6.1.4.1.8708.2.2.2.2
STR sysNodeName	1.3.6.1.4.1.8708.2.2.2.2.1	DisplayString	read-write	An administratively-assigned name for this managed node. By convention, this is the nodes fully-qualified domain name. The node name may be composed of the following characters: A to Z ; uppercase characters a to z ; lower case characters 0 to 9 ; numeric characters - ; dash . ; dot, is used as a separator _ ; underscore, supported (but might not be supported by all DNS servers) A host name (label) can start or end with a letter or a number A host name (label) MUST NOT start or end with a '-' (dash) A host name (label) MUST NOT consist of all numeric values A host name (label) can be up to 63 characters
STR sysNodeContact	1.3.6.1.4.1.8708.2.2.2.2.2	DisplayString	read-write	The textual identification of the contact person for this managed node, together with information on how to contact this person. Set to the empty string if not known. Example: 'Joe, e-mail: joe@localhost.localdomain'
STR sysNodeLocation	1.3.6.1.4.1.8708.2.2.2.2.3	DisplayString	read-write	The physical location of this node. Set to the empty string if not known. Example: 'Rack 5, in the system lab, third floor'
OID sysNodeObjectId	1.3.6.1.4.1.8708.2.2.2.2.4	OBJECT IDENTIFIER	read-only	The vendors authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what kind of box' is being managed.
STR sysNodePrimaryNameServer	1.3.6.1.4.1.8708.2.2.2.2.5	DisplayString	read-write	The name or IP address of the name server. Set to the empty string if not known. Example: 'dns.localdomain'
INT sysNodeRunLevel	1.3.6.1.4.1.8708.2.2.2.2.6	INTEGER	read-write	Note: This attribute is deprecated! Indicates the runlevel of the software. halt - Shutdown the entire node. single - Stop all applications and enter single user mode. normal - Normal operations. reboot - Restart the entire node. tbd: no network? tbd: restart with default configuration
STR sysNodeSecondaryNameServer	1.3.6.1.4.1.8708.2.2.2.2.7	DisplayString	read-write	The name or IP address of the name server. Set to the empty string if not known. Example: 'dns.lumentis.se', '192.168.1.200'
STR sysNodeUptime	1.3.6.1.4.1.8708.2.2.2.2.8	DisplayString	read-only	The uptime in string format.
STR sysNodeNeType	1.3.6.1.4.1.8708.2.2.2.2.9	DisplayString	read-write	User configurable identifier of the type of node. Included in performance measurements reports.
STR sysNodeNeUserName	1.3.6.1.4.1.8708.2.2.2.2.10	DisplayString	read-write	User configurable network element name. Included in performance measurements reports.
STR sysNodeNeDistinguishedName	1.3.6.1.4.1.8708.2.2.2.2.11	DisplayString	read-write	User configurable network element distinguished name. Included in performance measurements reports.
DAT sysNodeBootTime	1.3.6.1.4.1.8708.2.2.2.2.12	DateAndTime	read-only	Application start time.
STR sysNodeLocale	1.3.6.1.4.1.8708.2.2.2.2.13	DisplayString	read-write	Determines what rules should be used when formatting and display items that are affected by language and locality. The following is currently affected: Date and time Decimal character Unit used for temperatures If locale is set to US English temperatures are converted to degrees Fahrenheit. Note: Only the default locale, 'C', is supported at the moment.
STR sysNodeVersion	1.3.6.1.4.1.8708.2.2.2.2.14	DisplayString	read-only	The build version.
STR sysNodeCLLI	1.3.6.1.4.1.8708.2.2.2.2.15	DisplayString	read-write	Common Language Location Identifier of NE. Specifies the location and function of telecommunications equipment or of a relevant location such as international border or the location of a supporting equipment, such as a pole or a manhole.
STR sysNodeFIC	1.3.6.1.4.1.8708.2.2.2.2.16	DisplayString	read-write	Frame Identifier Code or Facility Interface Code for NE. FIC identifies the type of interface that the terminal equipment requires for compatible interconnection with wireline carrier facilities.
STR sysNodeTID	1.3.6.1.4.1.8708.2.2.2.2.17	DisplayString	read-only	Target ID of NE. A unique identifier which is a combination of the CLLI and FIC (Location+Frame).
STR sysNodeLatitude	1.3.6.1.4.1.8708.2.2.2.2.18	DisplayString	read-write	Latitude of the NE. A geographic coordinate ranging from -90 to +90 degree specifying the north-south position of a node on the Earth surface. Decimal Degree Representation is used as the latitude format.
STR sysNodeLongitude	1.3.6.1.4.1.8708.2.2.2.2.19	DisplayString	read-write	Longitude of the NE. A geographic coordinate ranging from -180 to +180 degree specifying the east-west position of the node on the Earth surface. Decimal Degree Representation is used as the longitude format.
sysHostList	1.3.6.1.4.1.8708.2.2.2.3
sysHostTable	1.3.6.1.4.1.8708.2.2.2.3.1		not-accessible	The well known host names list.
sysHostEntry	1.3.6.1.4.1.8708.2.2.2.3.1.1		not-accessible	An entry in well known host names list.
U32 sysHostIndex	1.3.6.1.4.1.8708.2.2.2.3.1.1.1	Unsigned32	read-only	An arbitrary index assigned to each host entry.
STR sysHostIpAddress	1.3.6.1.4.1.8708.2.2.2.3.1.1.2	DisplayString	read-create	The IP address of a well known host. Example: '192.168.1.200'
STR sysHostNames	1.3.6.1.4.1.8708.2.2.2.3.1.1.3	DisplayString	read-create	The name(s) of a well known host. Set to the empty string if not known. Example: 'dns.lumentis.se dns'
ROW sysHostRowStatus	1.3.6.1.4.1.8708.2.2.2.3.1.1.4	RowStatus	read-create	Manages creation and deletion of conceptual rows. See also SNMPv2-TC.
sysTime	1.3.6.1.4.1.8708.2.2.2.4
DAT sysTimeLocal	1.3.6.1.4.1.8708.2.2.2.4.1	DateAndTime	read-only	The local date and time.
STR sysTimeZone	1.3.6.1.4.1.8708.2.2.2.4.2	DisplayString	read-write	The name of the time zone in which node is located. A few examples: 'CET' 'EET' 'Europe/Stockholm' 'Europe/London' 'Europe/Copenhagen' 'Europe/Berlin' 'America/Chicago' 'America/Kentucky/Louisville' 'Asia/Tokyo' Note: The notation used for naming the timezones where the offset to Coordinated Universal Time (UTC) is explicitly included, i.e. 'GMT-2', may be confusing. The offset indicates the time value to be added to the local time to get UTC. This means that the the offset is positive for timezones west of UTC and and negative east of UTC. This is the opposite of how timezones are often described. For example standard time in Sweden is 'GMT-1'. On timezone maps zones east of UTC are often given a positive offset so that the very same zone is called 'GMT+1'. This attribute can be written via SNMP.
STR sysTimePrimaryServer	1.3.6.1.4.1.8708.2.2.2.4.3	DisplayString	read-write	The IP address of the primary SNTP/NTP server. Set to the 0.0.0.0 or empty string if not used. Example: '192.36.143.150' (time1.stupi.se)
STR sysTimeSecondaryServer	1.3.6.1.4.1.8708.2.2.2.4.4	DisplayString	read-write	The IP address of the secondary SNTP/NTP server. Set to the 0.0.0.0 or empty string if not used. Example: '192.36.143.151' (time2.stupi.se)
STR sysTimeChangeLocalTime	1.3.6.1.4.1.8708.2.2.2.4.5	CommandString	read-write	Change the local date and time. Year - If no century is input the current century is set by default. Month - 1 to 12 Day - 1 to 31 Hour - 0 to 23 Minute - 0 to 59 Second - 0 to 59 Note: Setting of the local time is disabled if either the primary or secondary time server is set.
IP sysTimePrimaryIpAddress	1.3.6.1.4.1.8708.2.2.2.4.6	IpAddress	read-write	The IP address of the primary SNTP/NTP server. Set to 0.0.0.0 if not used. Example: '192.36.143.150' (time1.stupi.se) This attribute can be written via SNMP.
IP sysTimeSecondaryIpAddress	1.3.6.1.4.1.8708.2.2.2.4.7	IpAddress	read-write	The IP address of the primary SNTP/NTP server. Set to 0.0.0.0 if not used. Example: '192.36.143.150' (time1.stupi.se) This attribute can be written via SNMP.
sysLogList	1.3.6.1.4.1.8708.2.2.2.5
sysLogTable	1.3.6.1.4.1.8708.2.2.2.5.1		not-accessible	The syslog configuration directives list.
sysLogEntry	1.3.6.1.4.1.8708.2.2.2.5.1.1		not-accessible	An entry in the syslog configuration directives list.
U32 sysLogIndex	1.3.6.1.4.1.8708.2.2.2.5.1.1.1	Unsigned32	read-only	An arbitrary index assigned to each syslog configuration directive.
STR sysLogSelection	1.3.6.1.4.1.8708.2.2.2.5.1.1.2	DisplayString	read-write	tbd description tbd examples
STR sysLogAction	1.3.6.1.4.1.8708.2.2.2.5.1.1.3	DisplayString	read-write	tbd description tbd examples
ROW sysLogRowStatus	1.3.6.1.4.1.8708.2.2.2.5.1.1.4	RowStatus	read-write	Manages creation and deletion of conceptual rows. See also SNMPv2-TC.
sysUserList	1.3.6.1.4.1.8708.2.2.2.6
sysUserTable	1.3.6.1.4.1.8708.2.2.2.6.1		not-accessible	The local user list.
sysUserEntry	1.3.6.1.4.1.8708.2.2.2.6.1.1		not-accessible	An entry in the local user list. Prompts for the following when creating a new user: Password for the current user (the user in question or an administrator). New password for the user. New password again. Profile for the new user (default operator).
U32 sysUserIndex	1.3.6.1.4.1.8708.2.2.2.6.1.1.1	Unsigned32	read-only	An arbitrary index assigned to each entry.
STR sysUserName	1.3.6.1.4.1.8708.2.2.2.6.1.1.2	DisplayString	read-create	The username must start with a lowercase alphabetical character. The rest of the username should be lowercase letters (a-z), numbers(0-9) or any of the following characters: -._ It is also possible to add $ as the last character.
STR sysUserPasswd	1.3.6.1.4.1.8708.2.2.2.6.1.1.3	DisplayString	read-write	tbd description tbd examples
STR sysUserDescr	1.3.6.1.4.1.8708.2.2.2.6.1.1.4	DisplayString	read-only	User description string.
DAT sysUserLastChangeTime	1.3.6.1.4.1.8708.2.2.2.6.1.1.5	DateAndTime	read-only	tbd description tbd examples
DAT sysUserExpireTime	1.3.6.1.4.1.8708.2.2.2.6.1.1.6	DateAndTime	read-only	tbd description tbd examples
ROW sysUserRowStatus	1.3.6.1.4.1.8708.2.2.2.6.1.1.7	RowStatus	read-create	Manages creation and deletion of conceptual rows. See also SNMPv2-TC.
STR sysUserProfile	1.3.6.1.4.1.8708.2.2.2.6.1.1.8	DisplayString	read-only	The user authority profile. 'administrator' - No restrictions. 'operator' - Restrictions on user operations and some systems management operations. Otherwise read/write access. 'readonly' - Read only access.
U32 sysUserUid	1.3.6.1.4.1.8708.2.2.2.6.1.1.9	Unsigned32	read-only	User id.
STR sysUserChangePassword	1.3.6.1.4.1.8708.2.2.2.6.1.1.10	CommandString	read-write	Change user password. Permitted for the the user in question and administrators. Asks for the following: User database to update, Local or TACACS. The system supports update of either the local password or the TACACS password on a remote server. This choice is seen only when applicable. Password for the current user (the user in question or an administrator). New password for the user. New password again. Password can consist of any printable ASCII character except for '&' and whitespace. There are no restrictions on upper or lower case characters. Password length: 1 - 40 character(s). Default password is set when new user is created.
STR sysUserClearPassword	1.3.6.1.4.1.8708.2.2.2.6.1.1.11	CommandString	read-write	Clear the user password. Only permitted for administrators. Asks for the following: Password for the current user. Note: Only changes the local password. If a RADIUS- or TACACS+-server is in use they may override the local configuration.
STR sysUserDisable	1.3.6.1.4.1.8708.2.2.2.6.1.1.12	CommandString	read-write	Disable the user. Clear or set the password to make the user available again. Only permitted for administrators. Asks for the following: Password for the current user. Note: Only disables the user locally. If a RADIUS- or TACACS+-server is in use they may override the local configuration.
STR sysUserEnable	1.3.6.1.4.1.8708.2.2.2.6.1.1.13	CommandString	read-write	Enable the user. Only permitted for administrators. Asks for the following: Password for the current user. Note: Only enables the user locally. If a RADIUS- or TACACS+-server is in use they may override the local configuration.
INT sysUserMode	1.3.6.1.4.1.8708.2.2.2.6.1.1.14	INTEGER	read-only	Administrative status for the user. Note: Only shows the local user configuration. If a RADIUS- or TACACS+-server is in use they may override the local configuration.
sysRadius	1.3.6.1.4.1.8708.2.2.2.7
STR sysRadiusPrimaryServer	1.3.6.1.4.1.8708.2.2.2.7.1	DisplayString	read-only	The IP address for the primary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used. If either the server or the secret are not set the primary server is disabled.
STR sysRadiusPrimarySecret	1.3.6.1.4.1.8708.2.2.2.7.2	DisplayString	read-only	The shared secret for the primary RADIUS-server. Set to empty string if not used. If either the server or the secret are not set the primary server is disabled.
STR sysRadiusSecondaryServer	1.3.6.1.4.1.8708.2.2.2.7.3	DisplayString	read-only	The IP address for the secondary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used. If either the server or the secret are not set the secondary server is disabled.
STR sysRadiusSecondarySecret	1.3.6.1.4.1.8708.2.2.2.7.4	DisplayString	read-only	The shared secret for the secondary RADIUS-server. Set to empty string if not used. If either the server or the secret are not set the secondary server is disabled.
IP sysRadiusPrimaryIpAddress	1.3.6.1.4.1.8708.2.2.2.7.5	IpAddress	read-only	The IP address for the primary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to 0.0.0.0 if not used. If either the server or the secret are not set the primary server is disabled.
IP sysRadiusSecondaryIpAddress	1.3.6.1.4.1.8708.2.2.2.7.6	IpAddress	read-only	The IP address for the secondary RADIUS-server. The port number used is 1812 (accounting, port 1813, is not enabled). Time-out is 3 seconds. Set to 0.0.0.0 if not used. If either the server or the secret are not set the primary server is disabled.
U32 sysRadiusPrimaryPort	1.3.6.1.4.1.8708.2.2.2.7.7	Unsigned32	read-only	The port number for the primary RADIUS server.
U32 sysRadiusSecondaryPort	1.3.6.1.4.1.8708.2.2.2.7.8	Unsigned32	read-only	The port number used for the Secondary RADIUS server.
STR sysRadiusDefaultUserProfile	1.3.6.1.4.1.8708.2.2.2.7.9	DisplayString	read-only	The user authority profile. 'administrator' - No restrictions. 'operator' - Restrictions on user operations and some systems management operations. Otherwise read/write access. 'readonly' - Read only access. 'no radius template' - The user 'radius' is used as template. It should be created if RADIUS server is used. Otherwise both primary and secondary servers are disabled.
sysLicense	1.3.6.1.4.1.8708.2.2.2.8
DAT sysLicenseExpireDate	1.3.6.1.4.1.8708.2.2.2.8.1	DateAndTime	read-only	Shows the date when the license will expire.
STR sysLicenseCustomer	1.3.6.1.4.1.8708.2.2.2.8.2	DisplayString	read-only	Shows the name of the customer that holds the license.
FAU sysLicenseExpiresSoon	1.3.6.1.4.1.8708.2.2.2.8.3	FaultStatus	read-only	Warns that the license will expire in 7 days, or less.
FAU sysLicenseExpired	1.3.6.1.4.1.8708.2.2.2.8.4	FaultStatus	read-only	Indicates that the license has expired, or the license file is missing.
INT sysLicenseExpiredCause	1.3.6.1.4.1.8708.2.2.2.8.5	INTEGER	read-only	Describes why the license expired alarm is raised. none - file is ok, no alarm. missing - the license file is missing. invalid - it is not a valid XML file, or some tags are missing. corrupt - the encryption key does not match the content of the file. expired - the license has expired.
INT sysLicenseFeatureEws	1.3.6.1.4.1.8708.2.2.2.8.6	INTEGER	read-only	disabled - the feature ENM can not be used. enabled - the feature ENM can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired.
INT sysLicenseFeatureOspf	1.3.6.1.4.1.8708.2.2.2.8.7	INTEGER	read-only	disabled - the feature OSPF can not be used. enabled - the feature OSPF can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired.
INT sysLicenseFeatureSnmp	1.3.6.1.4.1.8708.2.2.2.8.8	INTEGER	read-only	disabled - the feature SNMP can not be used. enabled - the feature SNMP can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired.
INT sysLicenseFeatureGmpls	1.3.6.1.4.1.8708.2.2.2.8.9	INTEGER	read-only	disabled - the feature GMPLS can not be used. enabled - the feature GMPLS can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired.
INT sysLicenseFeatureRudb	1.3.6.1.4.1.8708.2.2.2.8.10	INTEGER	read-only	disabled - the feature RUDB can not be used. enabled - the feature RUDB can be used. demo - the feature is only for demo use. corrupt - the encryption key does not match. expired - the feature has expired. RUDB means 'remote used database' and include TACACS and RADIUS.
STR sysLicenseInstallLicenseFile	1.3.6.1.4.1.8708.2.2.2.8.11	CommandString	read-only	Install a new license file. The license file can either be fetched from a remote server or installed from local directory. There are 3 cases: 1. Remote server. Give server addr and full path installLicenseFile / installLicenseFile 192.168.10.27/tftp/license.xml 2. From a local directory installLicenseFile installLicenseFile /root/license.xml 3. From the local download directory /tftpboot/downloaded installLicenseFile installLicenseFile license.xml Regardless of the name of the file it will be installed as /etc/lumentis/license.xml
sysTacacs	1.3.6.1.4.1.8708.2.2.2.9
STR sysTacacsPrimaryServer	1.3.6.1.4.1.8708.2.2.2.9.1	DisplayString	read-only	The IP address for the primary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used.
STR sysTacacsSecondaryServer	1.3.6.1.4.1.8708.2.2.2.9.2	DisplayString	read-only	The IP address for the secondary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to the 0.0.0.0 or empty string if not used.
STR sysTacacsSecret	1.3.6.1.4.1.8708.2.2.2.9.3	DisplayString	read-only	The shared secret for the primary TACACS+-server. Set to empty string if not used.
STR sysTacacsSecondarySecret	1.3.6.1.4.1.8708.2.2.2.9.4	DisplayString	read-only	The shared secret for the secondary TACACS+-server. Set to empty string if not used.
IP sysTacacsPrimaryIpAddress	1.3.6.1.4.1.8708.2.2.2.9.5	IpAddress	read-only	The IP address for the primary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to 0.0.0.0 if not used.
IP sysTacacsSecondaryIpAddress	1.3.6.1.4.1.8708.2.2.2.9.6	IpAddress	read-only	The IP address for the secondary TACACS+-server. The port number used is 49. Time-out is 3 seconds. Set to 0.0.0.0 if not used.
sysAudit	1.3.6.1.4.1.8708.2.2.2.10
sysSecurity	1.3.6.1.4.1.8708.2.2.2.11
INT sysSecurityLocalConsoleAccess	1.3.6.1.4.1.8708.2.2.2.11.1	INTEGER	read-only	When this parameter is 'disabled' there is no way to access the board via RS-232. Note, the setting applies to all boards in all chassis. enabled - Access is allowed disabled - No access is allowed. The boot monitor and LINUX login are blocked. bootdisabled - The boot monitor is blocked while LINUX login is allowed. Only administrator can change the local console access settings.
STR sysSecurityChangeLocalConsoleAccess	1.3.6.1.4.1.8708.2.2.2.11.2	CommandString	read-only	Procedure to change 'Local Console Access'
INT sysSecurityIpTablesStatus	1.3.6.1.4.1.8708.2.2.2.11.3	INTEGER	read-only	This parameter shows if a system function is enabled in the node. unavailable - package not installed unsecure - package installed but not in use secure - package installed and in use
ENA sysSecurityLocalCraftAccess	1.3.6.1.4.1.8708.2.2.2.11.4	EnableDisable	read-write	The local craft ETH access is used for connecting a PC which runs DHCP (Dynamic Host Control Protocol) for accessing the web (GUI) interface. Use lc in the address bar of the browser. The IP address of the DCN also works. When this parameter is 'disabled' there is no way to access the board via Craft ETH port. enabled - Access is allowed disabled - No access is allowed. Only administrator can change the local craft ETH access settings. The Local Craft ETH runs in 1000Base-T mode (1G Eth) or lower speed depending on the auto negotiation.
STR sysSecurityChangeLocalCraftAccess	1.3.6.1.4.1.8708.2.2.2.11.5	CommandString	read-only	Procedure to change 'Local Craft ETH Access'
INT sysSecurityAuthenticationOrder	1.3.6.1.4.1.8708.2.2.2.11.6	INTEGER	read-only	This parameter shows the authentication order which is used by the system. localFirst - First authenticate with respect to local user database. If it fails, try remote server(s). If no remote servers are configured, the authentication will be Local-Only. remoteFirst - First authenticate with respect to the remote servers. If all remote servers are unreachable, try the local user database. If the remote authentication is denied, try the local user database. strictRemoteFirst - First authenticate with respect to the remote servers. If all remote servers are unreachable, try the local user database. If the remote authentication is denied, stop, access is denied. Only administrator can change the authenticate order settings.
ENA sysSecurityFileSystemAccessRestrictions	1.3.6.1.4.1.8708.2.2.2.11.7	EnableDisable	read-only	Access rights to the file system of the node element. When 'restricted', restrictions to the file system are activated, these restrictions depends on the user authority profile. disabled - Default access rights: 1. Administrators (including root) and operators can execute CLI commands bash and telnet. 2. All users have full file system access using SFTP or FTP (if enabled). enabled - Restricted access rights to the file system. The following restrictions are applied: 1. Only administrator users (including root) can execute CLI commands bash and telnet. 2. When using SFTP: Readonly and operator users can only access /tftpboot/ and its subdirectories. Administrator users (including root) have full file system access. 3. When using FTP (if enabled): Readonly, operator and all administrator users except root can only access /tftpboot/ and its subdirectories. The root user have full file system access. When changed, the updated restrictions will be used at following FTP/SFTP sessions. On CU-SFP/III, active FTP sessions will be aborted at the point when file system access is changed. Only administrator can change the file system access restriction settings.
ENA sysSecurityCUFrontICNPortAccess	1.3.6.1.4.1.8708.2.2.2.11.8	EnableDisable	read-only	The CU front ICN port access is used for internal connection between subracks. When this parameter is 'disabled' there is no way to access next node via ICN1 or ICN2. enabled - Access is allowed disabled - No access is allowed. Only administrator can change the CU front ICN port access settings.
STR sysSecurityChangeCUFrontICNPortAccess	1.3.6.1.4.1.8708.2.2.2.11.9	CommandString	read-only	Procedure to change 'CU front ICN port access'
ENA sysSecuritySubrackICNPortAccess	1.3.6.1.4.1.8708.2.2.2.11.10	EnableDisable	read-only	The Subrack ICN port access is used for internal connection between subracks. When this parameter is 'disabled' there is no way to access next subrack via ICN3 or ICN4. enabled - Access is allowed disabled - No access is allowed. Only administrator can change the Subrack ICN port access settings.
STR sysSecurityChangeSubrackICNPortAccess	1.3.6.1.4.1.8708.2.2.2.11.11	CommandString	read-only	Procedure to change 'Subrack ICN port access'
INT sysSecurityMgmtAccessProofOfConnStatus	1.3.6.1.4.1.8708.2.2.2.11.12	INTEGER	read-only	This parameter shows if the NE has lost the signal or not. The SNMP agent is regularly polling the NE and if the NE is not polled within a certain time period (set in parameter MgmtAccessProofOfConnectivity) we have proof of connectivity loss, and this parameter is set to disconnected. undefined - NE connectivity status not determined disconnected - NE lost connection connected - NE is connected
I32 sysSecurityMgmtAccessProofOfConnectivity	1.3.6.1.4.1.8708.2.2.2.11.13	Integer32	read-only	Number of minutes that has to pass with no SNMP agent polls before the NE assumes that connectivity is lost. Only administrator can change the proof of connectivity settings.
ONO sysSecurityAutoEnableBlockedMgmtPorts	1.3.6.1.4.1.8708.2.2.2.11.14	OnOff	read-only	A setting to turn off/on auto enabling of blocked management ports. Management ports in this context means DCN and Local craft ETH (Local craft ETH does not exist on all platforms). If the network element has not been polled by the SNMP agent (DNA-M) within the time that is set by the attribute Proof of Connectivity, the blocked management ports are automatically enabled (deblocked/unblocked). If SNMP polling is detected again by the network element (after a discontinuity) the ports will revert to their blocked state. on - The function to auto enable blocked ports is turned on. off - The function to auto enable blocked ports is turned off. Only administrator can change the auto enable blocked management ports settings.
FAU sysSecurityBlockedMgmtPortsUnblocked	1.3.6.1.4.1.8708.2.2.2.11.15	FaultStatus	read-only	Blocked management ports (i.e. local craft and DCN ports) are unblocked. The blocking is overridden due to loss of management connectivity (SNMP).
STR sysSecurityInstallCertificates	1.3.6.1.4.1.8708.2.2.2.11.16	CommandString	read-only	Procedure to install certificates installCertificates Each is absolute (starting with '/'). After this command, the files are automatically deleted.
STR sysSecurityInstallFactoryDefaultCertificates	1.3.6.1.4.1.8708.2.2.2.11.17	CommandString	read-only	Procedure to install factory default certificates.
sysManager	1.3.6.1.4.1.8708.2.2.2.12
STR sysManagerName	1.3.6.1.4.1.8708.2.2.2.12.1	DisplayString	read-write	The name of Centralized Security Manager (DNA-M). This attribute shall NOT be set locally. The DNA-M managing the security features of the NE will set this. Requires administrator privileges to change.
STR sysManagerIPAddress	1.3.6.1.4.1.8708.2.2.2.12.2	DisplayString	read-write	The address of Centralized Security Manager (DNA-M). This attribute shall NOT be set locally. The DNA-M managing the security features of the NE will set this. Requires administrator privileges to change.
STR sysManagerPolicyName	1.3.6.1.4.1.8708.2.2.2.12.3	DisplayString	read-write	The name of the Security Policy, defined in DNA-M, that is assigned to this NE. This attribute shall NOT be set locally. The DNA-M managing the security features of the NE will set this. Requires administrator privileges to change.
PLA sysManagerPlatform	1.3.6.1.4.1.8708.2.2.2.12.4	Platform	read-only	NE platform information. Used by Centralized Security Manager (DNA-M).
STR sysManagerFcmComplianceVersion	1.3.6.1.4.1.8708.2.2.2.12.5	DisplayString	read-only	Feature Capability Matrix Compliance version. Used by Centralized Security Manager (DNA-M).
sysLoginBanner	1.3.6.1.4.1.8708.2.2.2.13
STR sysLoginBannerContent	1.3.6.1.4.1.8708.2.2.2.13.1	DisplayString	read-write	The login banner can be used to display pre-login information such as system information or a warning. The login banner requires administrator privileges to change and can be set through CLI, GUI or DNA-M. Characters 0x20 to 0x25 and 0x27 to 0x7E in ISO/IEC 8859-1 are accepted/valid. Ampersand ('&') 0x26 is not allowed (this is a general XTM restriction for text fields). New-line shall be encoded as '\\n' if the message is set through CLI. Min length: 0 character. Max length: 1020 characters. Although formal SNMP type is restricted to 128 characters, the system can cope with 1020 characters when managed from CLI/GUI or DNA-M.

RFC description

Vendor-specific MIB for system management in Infinera optical transport equipment, includes node parameters, licenses, authentication, and user configuration.

Start monitoring Infinera optical transport network nodes with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LUM-SYSTEM-MIB

What Is LUM-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description