LENOVO-XCC-MIB

All MIBs › LENOVO-XCC-MIB

Organization: Lenovo Group Ltd.

Last Updated: 2017-07-19

Category: Domain: Server Hardware, Vendor: Dell

Description: Lenovo XClarity Controller (XCC) MIB providing comprehensive server management including hardware inventory, sensors, and event logs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LENOVO-XCC-MIB?

This is the Lenovo XClarity Controller (XCC) MIB, providing comprehensive baseboard management controller (BMC)-style monitoring for Lenovo servers, covering hardware inventory, environmental sensors, and system event logs. As a full BMC MIB it exposes broad categories of data including hardware component inventory (CPUs, memory, storage, power supplies, fans), sensor readings, and historical/event log entries capturing hardware and firmware events. It is explicitly designed for monitoring hardware status such as temperature sensors, fan speed, power supply health, and system event/error logs, alongside firmware/software version information for the XCC management controller itself. It commonly depends on or parallels standard server management conventions similar to other vendors' BMC MIBs (e.g., IPMI-derived sensor models) though it is a Lenovo-proprietary implementation. It is deployed on Lenovo ThinkSystem/ThinkServer rack and blade servers equipped with the XClarity Controller BMC. Engineers can download the LENOVO-XCC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LENOVO-XCC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lenovo ThinkSystem/ThinkServer rack and blade servers with XClarity Controller BMC

Monitoring Examples

An administrator would poll XCC sensor tables to track CPU and ambient temperature readings, fan speed RPMs, and power supply status, alerting if any sensor crosses a critical threshold indicating overheating or a failed power supply. The system event log objects would be polled to detect recently logged hardware faults such as a failed DIMM or a fan failure, correlating them with sensor anomalies. XCC firmware version objects would also be checked to confirm the BMC is running a supported release before applying updates.

What Can Be Monitored

temperature sensors
fan speed status
power supply health
system event log entries
hardware component inventory
XCC firmware version

Imported Objects

From INET-ADDRESS-MIB

InetAddressIPv6

From LENOVO-SMI-MIB

lenovoServerMibs

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Gauge
IpAddress
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
lenovoXCCMIB	1.3.6.1.4.1.19046.11.1			This MIB is to be used to provide monitoring information support for Lenovo XClarity Controller (XCC)
monitors	1.3.6.1.4.1.19046.11.1.1
temperature	1.3.6.1.4.1.19046.11.1.1.1
INT tempNumber	1.3.6.1.4.1.19046.11.1.1.1.1	INTEGER	read-only	The present number of rows in the temperature table.
tempTable	1.3.6.1.4.1.19046.11.1.1.1.2		not-accessible	This table contains temperature measurement information.
tempEntry	1.3.6.1.4.1.19046.11.1.1.1.2.1		not-accessible	Each row contains parameters related to a temperature measurement channel.
INT tempIndex	1.3.6.1.4.1.19046.11.1.1.1.2.1.1	INTEGER	read-only	This column is used to identify a particular temperature measurement channel.
STR tempDescr	1.3.6.1.4.1.19046.11.1.1.1.2.1.2	DisplayString	read-only	A description of the temperature measurement channel.
STR tempReading	1.3.6.1.4.1.19046.11.1.1.1.2.1.3	DisplayString	read-only	The measured temperature.
STR tempNominalReading	1.3.6.1.4.1.19046.11.1.1.1.2.1.4	DisplayString	read-only	The nominal temperature, if available.
STR tempNonRecovLimitHigh	1.3.6.1.4.1.19046.11.1.1.1.2.1.5	DisplayString	read-only	The non-recoverable limit for the measured temperature. If the measured value rises above this limit a trap is sent.
STR tempCritLimitHigh	1.3.6.1.4.1.19046.11.1.1.1.2.1.6	DisplayString	read-only	The critical limit for the measured temperature. If the measured value rises above this limit a trap is sent.
STR tempNonCritLimitHigh	1.3.6.1.4.1.19046.11.1.1.1.2.1.7	DisplayString	read-only	The non-critical limit for the measured temperature. If the measured value rises above this limit a trap is sent.
STR tempNonRecovLimitLow	1.3.6.1.4.1.19046.11.1.1.1.2.1.8	DisplayString	read-only	The non-recoverable limit for the measured temperature. If the measured value falls below this limit a trap is sent.
STR tempCritLimitLow	1.3.6.1.4.1.19046.11.1.1.1.2.1.9	DisplayString	read-only	The critical limit for the measured temperature. If the measured value falls below this limit a trap is sent.
STR tempNonCritLimitLow	1.3.6.1.4.1.19046.11.1.1.1.2.1.10	DisplayString	read-only	The non-critical limit for the measured temperature. If the measured value falls below this limit a trap is sent.
STR tempHealthStatus	1.3.6.1.4.1.19046.11.1.1.1.2.1.11	DisplayString	read-only	A description of the temperature component status.
voltage	1.3.6.1.4.1.19046.11.1.1.2
INT voltNumber	1.3.6.1.4.1.19046.11.1.1.2.1	INTEGER	read-only	The present number of rows in the voltage table.
voltTable	1.3.6.1.4.1.19046.11.1.1.2.2		not-accessible	This table contains voltage measurement information.
voltEntry	1.3.6.1.4.1.19046.11.1.1.2.2.1		not-accessible	Each row contains parameters related to a voltage measurement channel.
INT voltIndex	1.3.6.1.4.1.19046.11.1.1.2.2.1.1	INTEGER	read-only	This column is used to identify a particular voltage measurement channel.
STR voltDescr	1.3.6.1.4.1.19046.11.1.1.2.2.1.2	DisplayString	read-only	A description of the voltage measurement channel.
STR voltReading	1.3.6.1.4.1.19046.11.1.1.2.2.1.3	DisplayString	read-only	The measured voltage.
STR voltNominalReading	1.3.6.1.4.1.19046.11.1.1.2.2.1.4	DisplayString	read-only	The nominal voltage, if available.
STR voltNonRecovLimitHigh	1.3.6.1.4.1.19046.11.1.1.2.2.1.5	DisplayString	read-only	The high non-recoverable limit for the measured voltage. If the measured value falls above this limit a trap is sent.
STR voltCritLimitHigh	1.3.6.1.4.1.19046.11.1.1.2.2.1.6	DisplayString	read-only	The high critical limit for the measured voltage. If the measured value rises above this limit a trap is sent.
STR voltNonCritLimitHigh	1.3.6.1.4.1.19046.11.1.1.2.2.1.7	DisplayString	read-only	The high non-critical limit for the measured voltage. If the measured value rises above this limit a trap is sent.
STR voltNonRecovLimitLow	1.3.6.1.4.1.19046.11.1.1.2.2.1.8	DisplayString	read-only	The low non-recoverable limit for the measured voltage. If the measured value falls below this limit a trap is sent.
STR voltCritLimitLow	1.3.6.1.4.1.19046.11.1.1.2.2.1.9	DisplayString	read-only	The low critical limit for the measured voltage. If the measured value falls below this limit a trap is sent.
STR voltNonCritLimitLow	1.3.6.1.4.1.19046.11.1.1.2.2.1.10	DisplayString	read-only	The low non-critical limit for the measured voltage. If the measured value falls below this limit a trap is sent.
STR voltHealthStatus	1.3.6.1.4.1.19046.11.1.1.2.2.1.11	DisplayString	read-only	A description of the voltage component status.
fans	1.3.6.1.4.1.19046.11.1.1.3
INT fanNumber	1.3.6.1.4.1.19046.11.1.1.3.1	INTEGER	read-only	The present number of rows in the fan table.
fanTable	1.3.6.1.4.1.19046.11.1.1.3.2		not-accessible	This table contains fan information.
fanEntry	1.3.6.1.4.1.19046.11.1.1.3.2.1		not-accessible	Each row contains parameters related to a fan.
INT fanIndex	1.3.6.1.4.1.19046.11.1.1.3.2.1.1	INTEGER	read-only	This column is used to identify a particular fan.
STR fanDescr	1.3.6.1.4.1.19046.11.1.1.3.2.1.2	DisplayString	read-only	A description of the fan measurement channel.
OCT fanSpeed	1.3.6.1.4.1.19046.11.1.1.3.2.1.3	OCTET STRING	read-only	Fan speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading zero. If the fan is determined not to be running or the fan speed cannot be determined, the string will indicate 'Offline'.
GAU fanNonRecovLimitHigh	1.3.6.1.4.1.19046.11.1.1.3.2.1.4	Gauge	read-only	The high non-recoverable limit for the measured fan. If the measured value falls above this limit a trap is sent.
GAU fanCritLimitHigh	1.3.6.1.4.1.19046.11.1.1.3.2.1.5	Gauge	read-only	The high critical limit for the measured fan. If the measured value rises above this limit a trap is sent.
GAU fanNonCritLimitHigh	1.3.6.1.4.1.19046.11.1.1.3.2.1.6	Gauge	read-only	The high non-critical limit for the measured fan. If the measured value rises above this limit a trap is sent.
GAU fanNonRecovLimitLow	1.3.6.1.4.1.19046.11.1.1.3.2.1.7	Gauge	read-only	The low non-recoverable limit for the measured fan. If the measured value falls below this limit a trap is sent.
GAU fanCritLimitLow	1.3.6.1.4.1.19046.11.1.1.3.2.1.8	Gauge	read-only	The low critical limit for the measured fan. If the measured value falls below this limit a trap is sent.
GAU fanNonCritLimitLow	1.3.6.1.4.1.19046.11.1.1.3.2.1.9	Gauge	read-only	The low non-critical limit for the measured fan. If the measured value falls below this limit a trap is sent.
STR fanHealthStatus	1.3.6.1.4.1.19046.11.1.1.3.2.1.10	DisplayString	read-only	A description of the fan component status.
systemHealth	1.3.6.1.4.1.19046.11.1.1.4
INT systemHealthStat	1.3.6.1.4.1.19046.11.1.1.4.1	INTEGER	read-only	Indicates status of system health for the system in which the XCC resides. Value of 'nonRecoverable' indicates a severe error has occurred and the system may not be functioning. A value of 'critical' indicates that a error has occurred but the system is currently functioning properly. A value of 'nonCritical' indicates that a condition has occurred that may change the state of the system in the future but currently the system is working properly. A value of 'normal' indicates that the system is operating normally.
systemHealthSummaryTable	1.3.6.1.4.1.19046.11.1.1.4.2		not-accessible	Table of System Health summary. Contains more detailed information about the reasons for the overall system health status.
systemHealthSummaryEntry	1.3.6.1.4.1.19046.11.1.1.4.2.1		not-accessible	System Health Summary entry
INT systemHealthSummaryIndex	1.3.6.1.4.1.19046.11.1.1.4.2.1.1	INTEGER	read-only	System health summary index.
OCT systemHealthSummarySeverity	1.3.6.1.4.1.19046.11.1.1.4.2.1.2	OCTET STRING	read-only	System health summary severity.
OCT systemHealthSummaryDescription	1.3.6.1.4.1.19046.11.1.1.4.2.1.3	OCTET STRING	read-only	System health summary description.
vpdInformation	1.3.6.1.4.1.19046.11.1.1.5
xccVpdTable	1.3.6.1.4.1.19046.11.1.1.5.1		not-accessible	Table of XCC VPD.
xccVpdEntry	1.3.6.1.4.1.19046.11.1.1.5.1.1		not-accessible	iMBC VPD entry.
INT xccVpdIndex	1.3.6.1.4.1.19046.11.1.1.5.1.1.1	INTEGER	read-only	XCC VPD index.
OCT xccVpdType	1.3.6.1.4.1.19046.11.1.1.5.1.1.2	OCTET STRING	read-only	XCC VPD Type. Indicates either Bios or Diag or spFimware VPD
OCT xccVpdVersionString	1.3.6.1.4.1.19046.11.1.1.5.1.1.3	OCTET STRING	read-only	XCC VPD Version Number of the software(Bios/Diag/spFirmware). For XCC the string contains both the Build ID and the Version Number, for example, like '1AOO3A v1.0.1'.
OCT xccVpdReleaseDate	1.3.6.1.4.1.19046.11.1.1.5.1.1.4	OCTET STRING	read-only	XCC VPD Release Date of when the software(Bios/Diag/spFirmware) was released.
machineVpd	1.3.6.1.4.1.19046.11.1.1.5.2
machineLevelVpd	1.3.6.1.4.1.19046.11.1.1.5.2.1
OCT machineLevelVpdMachineType	1.3.6.1.4.1.19046.11.1.1.5.2.1.1	OCTET STRING	read-only	Machine type VPD information.
OCT machineLevelVpdMachineModel	1.3.6.1.4.1.19046.11.1.1.5.2.1.2	OCTET STRING	read-only	Machine model VPD information.
OCT machineLevelSerialNumber	1.3.6.1.4.1.19046.11.1.1.5.2.1.3	OCTET STRING	read-only	Machine serial number VPD information.
OCT machineLevelUUID	1.3.6.1.4.1.19046.11.1.1.5.2.1.4	OCTET STRING	read-only	Machine UUID(Universal Unique ID information).
OCT machineLevelProductName	1.3.6.1.4.1.19046.11.1.1.5.2.1.5	OCTET STRING	read-only	Machine Product Name (e.g. System x3650 M2).
systemComponentLevelVpdTable	1.3.6.1.4.1.19046.11.1.1.5.17		not-accessible	Table of the system component hardware VPD information. View as a table and not as individual entries for consistent results.
systemComponentLevelVpdEntry	1.3.6.1.4.1.19046.11.1.1.5.17.1		not-accessible	System component hardware VPD entry. View as a table and not as individual entries for consistent results.
INT componentLevelVpdIndex	1.3.6.1.4.1.19046.11.1.1.5.17.1.1	INTEGER	read-only	System component level VPD index. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdFruNumber	1.3.6.1.4.1.19046.11.1.1.5.17.1.2	OCTET STRING	read-only	System component level VPD FRU number. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdFruName	1.3.6.1.4.1.19046.11.1.1.5.17.1.3	OCTET STRING	read-only	System component level VPD FRU name. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdSerialNumber	1.3.6.1.4.1.19046.11.1.1.5.17.1.4	OCTET STRING	read-only	System component level VPD serial number. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdManufacturingId	1.3.6.1.4.1.19046.11.1.1.5.17.1.5	OCTET STRING	read-only	System component level VPD manufacturing ID. View as a table and not as individual entries for consistent results.
systemComponentLevelVpdTrackingTable	1.3.6.1.4.1.19046.11.1.1.5.18		not-accessible	Table of system component hardware VPD tracking activity log. The activity log types depend on ipmifru information in the server but exclude DIMM infromation. View as a table and not as individual entries for consistent results.
systemComponentLevelVpdTrackingEntry	1.3.6.1.4.1.19046.11.1.1.5.18.1		not-accessible	System component hardware VPD tracking activity log entry. View as a table and not as individual entries for consistent results.
INT componentLevelVpdTrackingIndex	1.3.6.1.4.1.19046.11.1.1.5.18.1.1	INTEGER	read-only	System component level VPD tracking activity log index. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdTrackingFruNumber	1.3.6.1.4.1.19046.11.1.1.5.18.1.2	OCTET STRING	read-only	System component level VPD tracking activity log FRU number. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdTrackingFruName	1.3.6.1.4.1.19046.11.1.1.5.18.1.3	OCTET STRING	read-only	System component level VPD tracking activity log FRU name. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdTrackingSerialNumber	1.3.6.1.4.1.19046.11.1.1.5.18.1.4	OCTET STRING	read-only	System component level VPD tracking activity log serial number. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdTrackingManufacturingId	1.3.6.1.4.1.19046.11.1.1.5.18.1.5	OCTET STRING	read-only	System component level VPD tracking activity log manufacturing ID. View as a table and not as individual entries for consistent results.
OCT componentLevelVpdTrackingAction	1.3.6.1.4.1.19046.11.1.1.5.18.1.6	OCTET STRING	read-only	System component level VPD tracking activity log action(added/removed). View as a table and not as individual entries for consistent results.
OCT componentLevelVpdTrackingTimestamp	1.3.6.1.4.1.19046.11.1.1.5.18.1.7	OCTET STRING	read-only	System component level VPD tracking activity log timestanp. View as a table and not as individual entries for consistent results.
hostMACAddressTable	1.3.6.1.4.1.19046.11.1.1.5.19		not-accessible	Table of MAC addresses of the host NICs. For consistent results, view as a table and not as individual entries.
hostMACAddressEntry	1.3.6.1.4.1.19046.11.1.1.5.19.1		not-accessible	Host MAC address entry. For consistent results, view as a table and not as individual entries.
INT hostMACAddressIndex	1.3.6.1.4.1.19046.11.1.1.5.19.1.1	INTEGER	read-only	Host MAC address index. View as a table and not as individual entries for consistent results.
STR hostMACAddressDescription	1.3.6.1.4.1.19046.11.1.1.5.19.1.2	DisplayString	read-only	Description of the MAC Address entry. View as a table and not as individual entries for consistent results.
STR hostMACAddress	1.3.6.1.4.1.19046.11.1.1.5.19.1.3	DisplayString	read-only	Host MAC address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value must be in the form XX:XX:XX:XX:XX:XX View as a table and not as individual entries for consistent results.
systemCPUVpdTable	1.3.6.1.4.1.19046.11.1.1.5.20		not-accessible	Table of the system CPU VPD information. View as a table and not as individual entries for consistent results.
systemCPUVpdEntry	1.3.6.1.4.1.19046.11.1.1.5.20.1		not-accessible	System CPU VPD entry. View as a table and not as individual entries for consistent results.
INT cpuVpdIndex	1.3.6.1.4.1.19046.11.1.1.5.20.1.1	INTEGER	read-only	System CPU level VPD index. View as a table and not as individual entries for consistent results.
STR cpuVpdDescription	1.3.6.1.4.1.19046.11.1.1.5.20.1.2	DisplayString	read-only	System CPU Description. View as a table and not as individual entries for consistent results.
INT cpuVpdSpeed	1.3.6.1.4.1.19046.11.1.1.5.20.1.3	INTEGER	read-only	System cpu speed in MHz. View as a table and not as individual entries for consistent results.
STR cpuVpdIdentifier	1.3.6.1.4.1.19046.11.1.1.5.20.1.4	DisplayString	read-only	System CPU Identifier. View as a table and not as individual entries for consistent results.
STR cpuVpdType	1.3.6.1.4.1.19046.11.1.1.5.20.1.5	DisplayString	read-only	System cpu Type. View as a table and not as individual entries for consistent results.
STR cpuVpdFamily	1.3.6.1.4.1.19046.11.1.1.5.20.1.6	DisplayString	read-only	System cpu Family. View as a table and not as individual entries for consistent results.
INT cpuVpdCores	1.3.6.1.4.1.19046.11.1.1.5.20.1.7	INTEGER	read-only	System cpu number of cores. View as a table and not as individual entries for consistent results.
INT cpuVpdThreads	1.3.6.1.4.1.19046.11.1.1.5.20.1.8	INTEGER	read-only	System cpu number of threads. View as a table and not as individual entries for consistent results.
INT cpuVpdVoltage	1.3.6.1.4.1.19046.11.1.1.5.20.1.9	INTEGER	read-only	System cpu voltage in millivolts (1125 = 1.125 volts). View as a table and not as individual entries for consistent results.
INT cpuVpdDataWidth	1.3.6.1.4.1.19046.11.1.1.5.20.1.10	INTEGER	read-only	System cpu data width in bits. View as a table and not as individual entries for consistent results.
STR cpuVpdHealthStatus	1.3.6.1.4.1.19046.11.1.1.5.20.1.11	DisplayString	read-only	System cpu health status. View as a table and not as individual entries for consistent results.
STR cpuVpdCpuModel	1.3.6.1.4.1.19046.11.1.1.5.20.1.12	DisplayString	read-only	System cpu model. View as a table and not as individual entries for consistent results.
systemMemoryVpdTable	1.3.6.1.4.1.19046.11.1.1.5.21		not-accessible	Table of the system Memory VPD information. View as a table and not as individual entries for consistent results.
systemMemoryVpdEntry	1.3.6.1.4.1.19046.11.1.1.5.21.1		not-accessible	System Memory VPD entry. View as a table and not as individual entries for consistent results.
INT memoryVpdIndex	1.3.6.1.4.1.19046.11.1.1.5.21.1.1	INTEGER	read-only	System Memory level VPD index. View as a table and not as individual entries for consistent results.
STR memoryVpdDescription	1.3.6.1.4.1.19046.11.1.1.5.21.1.2	DisplayString	read-only	System memory Description (e.g. DIMM 1). View as a table and not as individual entries for consistent results.
STR memoryVpdPartNumber	1.3.6.1.4.1.19046.11.1.1.5.21.1.3	DisplayString	read-only	System Memory Part Number. View as a table and not as individual entries for consistent results.
STR memoryVpdFRUSerialNumber	1.3.6.1.4.1.19046.11.1.1.5.21.1.4	DisplayString	read-only	System memory Serial Number. View as a table and not as individual entries for consistent results.
STR memoryVpdManufactureDate	1.3.6.1.4.1.19046.11.1.1.5.21.1.5	DisplayString	read-only	System memory Manufacture Date in week/year format (e.g. 3609). View as a table and not as individual entries for consistent results.
STR memoryVpdType	1.3.6.1.4.1.19046.11.1.1.5.21.1.6	DisplayString	read-only	System memory Type (e.g. DDR III SDRAM). View as a table and not as individual entries for consistent results.
INT memoryVpdSize	1.3.6.1.4.1.19046.11.1.1.5.21.1.7	INTEGER	read-only	System memory size in GigaBytes. View as a table and not as individual entries for consistent results.
STR memoryHealthStatus	1.3.6.1.4.1.19046.11.1.1.5.21.1.8	DisplayString	read-only	A description of the memory component status.
INT memoryConfigSpeed	1.3.6.1.4.1.19046.11.1.1.5.21.1.9	INTEGER	read-only	System configured memory clock speed in MHz. View as a table and not as individual entries for consistent results.
INT memoryRatedSpeed	1.3.6.1.4.1.19046.11.1.1.5.21.1.10	INTEGER	read-only	System rated memory clock speed in MB/s. View as a table and not as individual entries for consistent results.
STR memoryLenovoPartNumber	1.3.6.1.4.1.19046.11.1.1.5.21.1.11	DisplayString	read-only	System Memory Lenovo related Part Number. View as a table and not as individual entries for consistent results.
INT memoryVpdAEPFlag	1.3.6.1.4.1.19046.11.1.1.5.21.1.12	INTEGER	read-only	Judge System DIMM belong to AEP DIMM. View as a table and not as individual entries for consistent results.
systemAepDIMMVpdTable	1.3.6.1.4.1.19046.11.1.1.5.22		not-accessible	Table of the system AEP DIMM VPD information. View as a table and not as individual entries for consistent results.
systemAepDIMMVpdEntry	1.3.6.1.4.1.19046.11.1.1.5.22.1		not-accessible	System AEP DIMM VPD entry. View as a table and not as individual entries for consistent results.
INT aepDIMMVpdIndex	1.3.6.1.4.1.19046.11.1.1.5.22.1.1	INTEGER	read-only	System AEP DIMM VPD index. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdMemory	1.3.6.1.4.1.19046.11.1.1.5.22.1.2	DisplayString	read-only	System AEP DIMM Description (e.g. DIMM 1). View as a table and not as individual entries for consistent results.
STR aepDIMMVpdBankLocator	1.3.6.1.4.1.19046.11.1.1.5.22.1.3	DisplayString	read-only	The Locator which manage AEP DIMM (e.g CPU 1) . View as a table and not as individual entries for consistent results.
STR aepDIMMVpdMaxSpeed	1.3.6.1.4.1.19046.11.1.1.5.22.1.4	DisplayString	read-only	System AEP DIMM MAX Speed. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdClockSpeed	1.3.6.1.4.1.19046.11.1.1.5.22.1.5	DisplayString	read-only	System AEP DIMM Clock Speed. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdManufacturer	1.3.6.1.4.1.19046.11.1.1.5.22.1.6	DisplayString	read-only	System AEP DIMM Manufacturer. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdSerialNumber	1.3.6.1.4.1.19046.11.1.1.5.22.1.7	DisplayString	read-only	System AEP DIMM Serial Number. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdPartNumber	1.3.6.1.4.1.19046.11.1.1.5.22.1.8	DisplayString	read-only	System AEP DIMM Part Number. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdRawCapacity	1.3.6.1.4.1.19046.11.1.1.5.22.1.9	DisplayString	read-only	System AEP DIMM Raw Capacity. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdMemoryCapacity	1.3.6.1.4.1.19046.11.1.1.5.22.1.10	DisplayString	read-only	System AEP DIMM Memory Capacity. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdAppDirectCapacity	1.3.6.1.4.1.19046.11.1.1.5.22.1.11	DisplayString	read-only	System AEP DIMM APP Direct Capacity. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdUnconfiguredCapacity	1.3.6.1.4.1.19046.11.1.1.5.22.1.12	DisplayString	read-only	System AEP DIMM Unconfigureed Capacity. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdInaccessibleCapacity	1.3.6.1.4.1.19046.11.1.1.5.22.1.13	DisplayString	read-only	System AEP DIMM Inaccessible Capacity. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdReservedCapacity	1.3.6.1.4.1.19046.11.1.1.5.22.1.14	DisplayString	read-only	System AEP DIMM Reserved Capacity. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdClassification	1.3.6.1.4.1.19046.11.1.1.5.22.1.15	DisplayString	read-only	System AEP DIMM Classification. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdFirmwareVersion	1.3.6.1.4.1.19046.11.1.1.5.22.1.16	DisplayString	read-only	System AEP DIMM Firmware Version. View as a table and not as individual entries for consistent results.
STR aepDIMMVpdSoftwareID	1.3.6.1.4.1.19046.11.1.1.5.22.1.17	DisplayString	read-only	System AEP DIMM Software ID. View as a table and not as individual entries for consistent results.
users	1.3.6.1.4.1.19046.11.1.1.6
xccUsers	1.3.6.1.4.1.19046.11.1.1.6.1
currentlyLoggedInTable	1.3.6.1.4.1.19046.11.1.1.6.1.1		not-accessible	Table of XCC users currently logged in.
currentlyLoggedInEntry	1.3.6.1.4.1.19046.11.1.1.6.1.1.1		not-accessible	XCC users currently logged in entries.
INT currentlyLoggedInEntryIndex	1.3.6.1.4.1.19046.11.1.1.6.1.1.1.1	INTEGER	read-only	Index for XCC users currently logged in.
OCT currentlyLoggedInEntryUserId	1.3.6.1.4.1.19046.11.1.1.6.1.1.1.2	OCTET STRING	read-only	Name for XCC users currently logged in.
OCT currentlyLoggedInEntryAccMethod	1.3.6.1.4.1.19046.11.1.1.6.1.1.1.3	OCTET STRING	read-only	Access method for XCC users currently logged in.
leds	1.3.6.1.4.1.19046.11.1.1.8
INT identityLED	1.3.6.1.4.1.19046.11.1.1.8.1	INTEGER	read-only	Indicates whether the front panel identity LED is on,off, or blinking and allows user to change it.
allLEDsTable	1.3.6.1.4.1.19046.11.1.1.8.2		not-accessible	Table of LEDs detailed information.
allLEDsEntry	1.3.6.1.4.1.19046.11.1.1.8.2.1		not-accessible	LEDs Details entry
INT ledIndex	1.3.6.1.4.1.19046.11.1.1.8.2.1.1	INTEGER	read-only	The LED index number. For consistent results, view as a table and not as individual entries.
INT ledIdentifier	1.3.6.1.4.1.19046.11.1.1.8.2.1.2	INTEGER	read-only	The unique identifier for this LED For consistent results, view as a table and not as individual entries.
STR ledLabel	1.3.6.1.4.1.19046.11.1.1.8.2.1.4	DisplayString	read-only	Text label for a LED. For consistent results, view as a table and not as individual entries.
INT ledState	1.3.6.1.4.1.19046.11.1.1.8.2.1.5	INTEGER	read-only	Text description which denotes color or on/off/blink state for a LED. For consistent results, view as a table and not as individual entries.
STR ledColor	1.3.6.1.4.1.19046.11.1.1.8.2.1.6	DisplayString	read-only	Color of this LED. For consistent results, view as a table and not as individual entries.
INT informationLED	1.3.6.1.4.1.19046.11.1.1.8.3	INTEGER	read-only	Indicates whether the front panel Information LED is on,off, or blinking and allows user to change it. The only value the user is allowed to enter is 0 for off. User may not turn this LED on or cause it to blink.
fuelGauge	1.3.6.1.4.1.19046.11.1.1.10
fuelGaugeInformation	1.3.6.1.4.1.19046.11.1.1.10.1
INT fuelGaugePowerCappingPolicySetting	1.3.6.1.4.1.19046.11.1.1.10.1.1	INTEGER	read-only	Power Capping Policy. Rack system only. No Power Limit - The maximum power limit will be determined by the active Power Redundancy policy. Static Power Limit - Sets the overall system power limit. In a situation where powering on a component would cause the limit to be exceeded, the component would not be permitted to power on.
INT fuelGaugeStaticPowerPcapSoftMin	1.3.6.1.4.1.19046.11.1.1.10.1.2	INTEGER	read-only	This field displays power capping soft minimum value. Rack system only.
INT fuelGaugeStaticPowerPcapMin	1.3.6.1.4.1.19046.11.1.1.10.1.3	INTEGER	read-only	This field displays power capping minimum value. Rack system only.
INT fuelGaugeStaticPowerPcapCurrentSetting	1.3.6.1.4.1.19046.11.1.1.10.1.4	INTEGER	read-only	This field is used to display or set the current power capping value. Rack system only.
INT fuelGaugeStaticPowerPcapMax	1.3.6.1.4.1.19046.11.1.1.10.1.5	INTEGER	read-only	This field displays power capping maximum value. Rack system only.
INT fuelGaugeStaticPowerPcapMode	1.3.6.1.4.1.19046.11.1.1.10.1.6	INTEGER	read-only	This field is used to display or set the all Power Cap settings to output or input. Rack system only.
INT fuelGaugeSystemMaxPower	1.3.6.1.4.1.19046.11.1.1.10.1.7	INTEGER	read-only	This field displays the system maximum power available value. Rack system only.
INT fuelGaugePowerRemaining	1.3.6.1.4.1.19046.11.1.1.10.1.8	INTEGER	read-only	This field displays power remaining value. Rack system only.
INT fuelGaugeTotalPowerAvailable	1.3.6.1.4.1.19046.11.1.1.10.1.9	INTEGER	read-only	This field displays the calculated total remaining power available value. Rack system only.
INT fuelGaugeTotalPowerInUse	1.3.6.1.4.1.19046.11.1.1.10.1.10	INTEGER	read-only	This field displays total power in use value.
INT fuelGaugePowerConsumptionCpu	1.3.6.1.4.1.19046.11.1.1.10.1.11	INTEGER	read-only	This field displays the power consumption of the processors.
INT fuelGaugePowerConsumptionMemory	1.3.6.1.4.1.19046.11.1.1.10.1.12	INTEGER	read-only	This field displays the power consumption of the memory.
INT fuelGaugePowerConsumptionOther	1.3.6.1.4.1.19046.11.1.1.10.1.13	INTEGER	read-only	This field displays the power consumption of other entities than processors and memory.
powerPolicyInformation	1.3.6.1.4.1.19046.11.1.1.10.2
powerPolicyTable	1.3.6.1.4.1.19046.11.1.1.10.2.1		not-accessible	Table of Power Policy information for all power domains. Reading this table information about the available power policies that can be configured and which is currently selected. Rack system only
powerPolicyEntry	1.3.6.1.4.1.19046.11.1.1.10.2.1.1		not-accessible	Power Policy Entry
INT powerPolicyIndex	1.3.6.1.4.1.19046.11.1.1.10.2.1.1.1	INTEGER	read-only	The unique idenitifier of a row in the powerPolicyTable.
OCT powerPolicyName	1.3.6.1.4.1.19046.11.1.1.10.2.1.1.2	OCTET STRING	read-only	The short name of the power policy. The following are the possible names and their detailed description: Power Module Redundant In redundant mode, the server is guaranteed to continue to remain operational with the loss of one power supply Power Module Non-Redundant In non-redundant mode, the server is not guaranteed to remain operational with the loss of a power supply. The system will throttle if a power supply fails in an attempt to stay up and running.
INT powerPolicyPwrSupplyFailureLimit	1.3.6.1.4.1.19046.11.1.1.10.2.1.1.3	INTEGER	read-only	The maximum number of power supplies that can fail in a chassis while still providing redundancy.
INT powerPolicyMaxPowerLimit	1.3.6.1.4.1.19046.11.1.1.10.2.1.1.4	INTEGER	read-only	The maximum power available (in watts), based on the number of power modules and the Power Management Policy setting.
INT powerPolicyEstimatedUtilization	1.3.6.1.4.1.19046.11.1.1.10.2.1.1.5	INTEGER	read-only	The estimated utilization (as a percentage) based on current power usage.
INT powerPolicyActivate	1.3.6.1.4.1.19046.11.1.1.10.2.1.1.6	INTEGER	read-only	This object provides the status of this power policy. If the value is enabled(1), it means this is the active power policy for the associated domain. When set to a value of enabled(1), the power policy will be made the active one for the associated domain. A set of disabled(0) is not allowed.
powerRestorePolicyControl	1.3.6.1.4.1.19046.11.1.1.10.2.2
INT powerRestorePolicy	1.3.6.1.4.1.19046.11.1.1.10.2.2.1	INTEGER	read-only	Power Restore Policy determines the mode of operation if a power loss occurs. This setting can also be configured via BIOS F1 setup. Rack system only. alwaysoff: System will remain off once power is restored. restore: Restores system to the same state it was before power failed. alwayson: System will automatically power on once power is restored.
INT powerRestoreDelay	1.3.6.1.4.1.19046.11.1.1.10.2.2.2	INTEGER	read-only	Power Restore Delay is executed when power restore policy is set to alwayson or restore(if the previous state was power-on). Rack system only. disabled: Power on the server without after AC is restored. random: Provide a random delay between 1 and 15 seconds from the time when AC is restored to the time when the server is automatically powered on.
powerPowerTrending	1.3.6.1.4.1.19046.11.1.1.10.3
powerTrendingSampleTable	1.3.6.1.4.1.19046.11.1.1.10.3.1		not-accessible	Table of Power Domain 1 Power Trending Information.
powerTrendingSampleEntry	1.3.6.1.4.1.19046.11.1.1.10.3.1.1		not-accessible	Power Domain 1 Power Trending Sample entry.
INT powerTrendingSampleIndex	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.1	INTEGER	read-only	Power Trending Sample Table Index.
OCT powerTrendingSampleTimeStamp	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.2	OCTET STRING	read-only	Power Trending Sample Table Timestamp.
INT powerTrendingSampleInputAve	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.3	INTEGER	read-only	Power Trending Table Input Average Power in the last 24 hours.
INT powerTrendingSampleInputMin	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.4	INTEGER	read-only	Power Trending Table Input Minimum Power in the last 24 hours.
INT powerTrendingSampleInputMax	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.5	INTEGER	read-only	Power Trending Table Input Maximum Power in the last 24 hours.
INT powerTrendingSampleOutputAve	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.6	INTEGER	read-only	Power Trending Table Output Average Power in the last 24 hours.
INT powerTrendingSampleOutputMin	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.7	INTEGER	read-only	Power Trending Table Output Minimum Power in the last 24 hours.
INT powerTrendingSampleOutputMax	1.3.6.1.4.1.19046.11.1.1.10.3.1.1.8	INTEGER	read-only	Power Trending Table Output Maximum Power in the last 24 hours.
powerModule	1.3.6.1.4.1.19046.11.1.1.11
GAU powerNumber	1.3.6.1.4.1.19046.11.1.1.11.1	Gauge	read-only	The present number of rows in the power module table. Rack system only.
powerTable	1.3.6.1.4.1.19046.11.1.1.11.2		not-accessible	This table contains power inventory information. Rack system only.
powerEntry	1.3.6.1.4.1.19046.11.1.1.11.2.1		not-accessible	Each row contains parameters related to a power module inventory channel.
INT powerIndex	1.3.6.1.4.1.19046.11.1.1.11.2.1.1	INTEGER	read-only	This column is used to identify a particular power module inventory channel.
STR powerFruName	1.3.6.1.4.1.19046.11.1.1.11.2.1.2	DisplayString	read-only	power module FRU name.
STR powerPartNumber	1.3.6.1.4.1.19046.11.1.1.11.2.1.3	DisplayString	read-only	power module Part Number. View as a table and not as individual entries for consistent results.
STR powerFRUNumber	1.3.6.1.4.1.19046.11.1.1.11.2.1.4	DisplayString	read-only	power module FRU Number. View as a table and not as individual entries for consistent results.
STR powerFRUSerialNumber	1.3.6.1.4.1.19046.11.1.1.11.2.1.5	DisplayString	read-only	power module Serial Number. View as a table and not as individual entries for consistent results.
STR powerHealthStatus	1.3.6.1.4.1.19046.11.1.1.11.2.1.6	DisplayString	read-only	A description of the power module status.
disks	1.3.6.1.4.1.19046.11.1.1.12
GAU diskNumber	1.3.6.1.4.1.19046.11.1.1.12.1	Gauge	read-only	The present number of rows in the disk module table.
diskTable	1.3.6.1.4.1.19046.11.1.1.12.2		not-accessible	This table contains disk inventory information.
diskEntry	1.3.6.1.4.1.19046.11.1.1.12.2.1		not-accessible	Each row contains parameters related to a disk module inventory channel.
INT diskIndex	1.3.6.1.4.1.19046.11.1.1.12.2.1.1	INTEGER	read-only	This column is used to identify a particular disk module inventory channel.
STR diskFruName	1.3.6.1.4.1.19046.11.1.1.12.2.1.2	DisplayString	read-only	disk module FRU name.
STR diskHealthStatus	1.3.6.1.4.1.19046.11.1.1.12.2.1.3	DisplayString	read-only	A description of the disk module status.
localStorage	1.3.6.1.4.1.19046.11.1.1.13
raid	1.3.6.1.4.1.19046.11.1.1.13.1
INT raidOOBCapable	1.3.6.1.4.1.19046.11.1.1.13.1.1	INTEGER	read-only	If raidOOBCapable is disabled, all the RAID information is not available.
raidControllerTable	1.3.6.1.4.1.19046.11.1.1.13.1.2		not-accessible	Table of Local Storage RAID Controller information.
raidControllerEntry	1.3.6.1.4.1.19046.11.1.1.13.1.2.1		not-accessible	RAID Controller Entry.
INT raidCtrlIndex	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.1	INTEGER	read-only	This column is used to identify a particular RAID controller.
STR raidCtrlName	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.2	DisplayString	read-only	This column is used to offer a name of one RAID controller.
STR raidCtrlVPDProdName	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.3	DisplayString	read-only	The Product Name of a particular RAID controller.
STR raidCtrlFWPkgVersion	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.4	DisplayString	read-only	The Firmware Package Version of a particular RAID controller.
INT raidCtrlBatBCK	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.5	INTEGER	read-only	Whether Battery Backup of a particular RAID controller is installed.
STR raidCtrlVPDManufacture	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.6	DisplayString	read-only	The Manufacture of a particular RAID controller.
STR raidCtrlVPDUUID	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.7	DisplayString	read-only	The Device ID (UUID) of a particular RAID controller.
STR raidCtrlVPDMachineType	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.8	DisplayString	read-only	The Model Type/Model of a particular RAID controller.
STR raidCtrlVPDModel	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.9	DisplayString	read-only	The Model Type/Model of a particular RAID controller.
STR raidCtrlVPDSerialNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.10	DisplayString	read-only	The Serial Number of a particular RAID controller.
STR raidCtrlVPDFRUNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.11	DisplayString	read-only	The FRU Number of a particular RAID controller.
STR raidCtrlVPDPartNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.12	DisplayString	read-only	The Part Number of a particular RAID controller.
STR raidCtrlCacheMdlStatus	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.13	DisplayString	read-only	The Cache Model Status of a particular RAID controller.
STR raidCtrlCacheMdlMemSize	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.14	DisplayString	read-only	The Cache Model Memory Size of a particular RAID controller.
STR raidCtrlCacheMdlSerialNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.15	DisplayString	read-only	The Cache Model Serial Number of a particular RAID controller.
INT raidCtrlPCISlotNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.16	INTEGER	read-only	The PCI Slot Number of a particular RAID controller.
INT raidCtrlPCIBusNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.17	INTEGER	read-only	The PCI Bus Number of a particular RAID controller.
INT raidCtrlPCIDevNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.18	INTEGER	read-only	The PCI Device Number of a particular RAID controller.
INT raidCtrlPCIFuncNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.19	INTEGER	read-only	The PCI Function Number of a particular RAID controller.
STR raidCtrlPCIDevID	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.20	DisplayString	read-only	The PCI Device ID of a particular RAID controller.
STR raidCtrlPCISubDevID	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.21	DisplayString	read-only	The PCI Subsystem Device ID of a particular RAID controller.
STR raidCtrlBatBCKProdName	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.22	DisplayString	read-only	The Product Name of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKManufacture	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.23	DisplayString	read-only	The Manufacture of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKStatus	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.24	DisplayString	read-only	The Status of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKType	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.25	DisplayString	read-only	The Battery Type of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKChem	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.26	DisplayString	read-only	The Chemistry of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKSerialNo	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.27	DisplayString	read-only	The Serial Number of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKChgCap	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.28	DisplayString	read-only	The Charge Capacity of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKFirmware	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.29	DisplayString	read-only	The Firmware Info of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKDgnVoltage	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.30	DisplayString	read-only	The Designed Voltage of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKVoltage	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.31	DisplayString	read-only	The Voltage of Battery Backup of a particular RAID controller.
STR raidCtrlBatCurrent	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.32	DisplayString	read-only	The Current of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKDgnChgCap	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.33	DisplayString	read-only	The Design Charge Capacity of Battery Backup of a particular RAID controller.
STR raidCtrlBatBCKCrtTemp	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.34	DisplayString	read-only	The Current degree Celsius temperature of Battery Backup of a particular RAID controller.
STR raidCtrlFWNames	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.35	DisplayString	read-only	All the Firmware Names of a particular RAID controller.
STR raidCtrlPortDetails	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.36	DisplayString	read-only	All the Port Details of a particular RAID controller, including Port Address and Port Controller Type.
STR raidCtrlStoragepools	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.37	DisplayString	read-only	The storage pools list of a particular RAID controller.
STR raidCtrlDrives	1.3.6.1.4.1.19046.11.1.1.13.1.2.1.38	DisplayString	read-only	The Physical drives list of a particular RAID controller.
raidDriveTable	1.3.6.1.4.1.19046.11.1.1.13.1.3		not-accessible	Table of Logic Storage RAID Drive information.
raidDriveEntry	1.3.6.1.4.1.19046.11.1.1.13.1.3.1		not-accessible	RAID Drive Entry.
INT raidDriveIndex	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.1	INTEGER	read-only	This column is used to identify a particular RAID drive.
STR raidDriveName	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.2	DisplayString	read-only	A particular drive name.
STR raidDriveVPDProdName	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.3	DisplayString	read-only	The Product Name of a particular RAID drive.
STR raidDriveState	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.4	DisplayString	read-only	The State of a particular RAID drive.
INT raidDriveSlotNo	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.5	INTEGER	read-only	The Slot No. of a particular RAID drive.
STR raidDriveDeviceID	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.6	DisplayString	read-only	The Device ID of a particular RAID drive.
STR raidDriveDiskType	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.7	DisplayString	read-only	The Disk Type of a particular RAID drive.
STR raidDriveMediaType	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.8	DisplayString	read-only	The Media Type of a particular RAID drive.
STR raidDriveSpeed	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.9	DisplayString	read-only	The Speed of a particular RAID drive.
STR raidDriveCurTemp	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.10	DisplayString	read-only	The Current degree Celsius temperature of a particular RAID drive.
STR raidDriveHealthStataus	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.11	DisplayString	read-only	The Health Status of a particular RAID drive.
STR raidDriveCapacity	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.12	DisplayString	read-only	The Capacity of a particular RAID drive.
STR raidDriveVPDManufacture	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.13	DisplayString	read-only	The Manufacture of a particular RAID drive.
STR raidDriveEnclosureID	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.14	DisplayString	read-only	The Enclosure ID of a particular RAID drive.
STR raidDriveVPDMachineType	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.15	DisplayString	read-only	The Machine type of a particular RAID drive.
STR raidDriveVPDModel	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.16	DisplayString	read-only	The Model of a particular RAID drive.
STR raidDriveVPDSerialNo	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.17	DisplayString	read-only	The Serial No. of a particular RAID drive.
STR raidDriveVPDFRUNo	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.18	DisplayString	read-only	The FRU No. of a particular RAID drive.
STR raidDriveVPDPartNo	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.19	DisplayString	read-only	The Part No. of a particular RAID drive.
STR raidDriveFWNames	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.20	DisplayString	read-only	All the Firmware Names of a particular RAID drive.
STR raidDriveRotationRate	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.21	DisplayString	read-only	The Rotation Rate of a particular RAID drive.
GAU raidDriveMediaErrCnt	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.22	Gauge	read-only	The Media Error Count of a particular RAID drive.
GAU raidDriveOtherErrCnt	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.23	Gauge	read-only	The Other Error Count of a particular RAID drive.
GAU raidDrivePredFailCnt	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.24	Gauge	read-only	The Predication Fail Count of a particular RAID drive.
STR raidDriveRemainingLife	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.25	DisplayString	read-only	The Remaining life of a particular RAID drive. It is available only for SSD Drive.
INT raidDriveFdeCapable	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.26	INTEGER	read-only	Indicates Full Disk Encryption Capable of a particular RAID drive.
INT raidDriveSecured	1.3.6.1.4.1.19046.11.1.1.13.1.3.1.27	INTEGER	read-only	Indicates Secured status of a particular RAID drive.
raidControllerFirmwareTable	1.3.6.1.4.1.19046.11.1.1.13.1.4		not-accessible	Table of Logic Storage RAID Controller Firmware information.
raidControllerFirmwareEntry	1.3.6.1.4.1.19046.11.1.1.13.1.4.1		not-accessible	RAID Firmware Entry.
INT raidControllerFirmwareIndex	1.3.6.1.4.1.19046.11.1.1.13.1.4.1.1	INTEGER	read-only	This column is used to identify a particular RAID Controller firmware.
STR raidControllerFirmwareName	1.3.6.1.4.1.19046.11.1.1.13.1.4.1.2	DisplayString	read-only	The Name of a particular RAID Controller firmware.
STR raidControllerFirmwareCtrlName	1.3.6.1.4.1.19046.11.1.1.13.1.4.1.3	DisplayString	read-only	The controller name of the firmwares.
STR raidControllerFirmwareDescription	1.3.6.1.4.1.19046.11.1.1.13.1.4.1.4	DisplayString	read-only	The Description of a particular RAID Controller firmware.
STR raidControllerFirmwareManufacture	1.3.6.1.4.1.19046.11.1.1.13.1.4.1.5	DisplayString	read-only	The Manufacture of a particular RAID Controller firmware.
STR raidControllerFirmwareVersion	1.3.6.1.4.1.19046.11.1.1.13.1.4.1.6	DisplayString	read-only	The Version of a particular RAID Controller firmware.
STR raidControllerFirmwareReleaseDate	1.3.6.1.4.1.19046.11.1.1.13.1.4.1.7	DisplayString	read-only	The Release Date of a particular RAID Controller firmware.
raidDriveFirmwareTable	1.3.6.1.4.1.19046.11.1.1.13.1.5		not-accessible	Table of Logic Storage RAID Drive Firmware information.
raidDriveFirmwareEntry	1.3.6.1.4.1.19046.11.1.1.13.1.5.1		not-accessible	RAID Drive Firmware Entry.
INT raidDriveFirmwareIndex	1.3.6.1.4.1.19046.11.1.1.13.1.5.1.1	INTEGER	read-only	This column is used to identify a particular RAID Drive firmware.
STR raidDriveFirmwareName	1.3.6.1.4.1.19046.11.1.1.13.1.5.1.2	DisplayString	read-only	The Name of a particular RAID Drive firmware.
STR raidDriveFirmwareDriveName	1.3.6.1.4.1.19046.11.1.1.13.1.5.1.3	DisplayString	read-only	The drive name of the firmwares.
STR raidDriveFirmwareDescription	1.3.6.1.4.1.19046.11.1.1.13.1.5.1.4	DisplayString	read-only	The Description of a particular RAID Drive firmware.
STR raidDriveFirmwareManufacture	1.3.6.1.4.1.19046.11.1.1.13.1.5.1.5	DisplayString	read-only	The Manufacture of a particular RAID Drive firmware.
STR raidDriveFirmwareVersion	1.3.6.1.4.1.19046.11.1.1.13.1.5.1.6	DisplayString	read-only	The Version of a particular RAID Drive firmware.
STR raidDriveFirmwareReleaseDate	1.3.6.1.4.1.19046.11.1.1.13.1.5.1.7	DisplayString	read-only	The Release Date of a particular RAID Drive firmware.
raidStoragepoolTable	1.3.6.1.4.1.19046.11.1.1.13.1.6		not-accessible	Table of Logic Storage RAID Storagepool information.
raidStoragepoolEntry	1.3.6.1.4.1.19046.11.1.1.13.1.6.1		not-accessible	RAID Storagepool Entry.
INT raidStoragepoolIndex	1.3.6.1.4.1.19046.11.1.1.13.1.6.1.1	INTEGER	read-only	This column is used to identify a particular RAID storagepool.
STR raidStoragepoolName	1.3.6.1.4.1.19046.11.1.1.13.1.6.1.2	DisplayString	read-only	The name of a particular RAID storagepool.
STR raidStoragepoolControllerName	1.3.6.1.4.1.19046.11.1.1.13.1.6.1.3	DisplayString	read-only	The controller name of the storagepool.
STR raidStoragepoolState	1.3.6.1.4.1.19046.11.1.1.13.1.6.1.4	DisplayString	read-only	The RAID State of a particular RAID storagepool.
STR raidStoragepoolCapacity	1.3.6.1.4.1.19046.11.1.1.13.1.6.1.5	DisplayString	read-only	The Capacity of a particular RAID storagepool, including total capacity and free capacity.
STR raidStoragepoolVols	1.3.6.1.4.1.19046.11.1.1.13.1.6.1.6	DisplayString	read-only	The volumes list of a particular RAID storagepool.
STR raidStoragepoolDrives	1.3.6.1.4.1.19046.11.1.1.13.1.6.1.7	DisplayString	read-only	The physical drives list of a particular RAID storagepool.
raidVolumeTable	1.3.6.1.4.1.19046.11.1.1.13.1.7		not-accessible	Table of Logic Storage RAID Volume information.
raidVolumeEntry	1.3.6.1.4.1.19046.11.1.1.13.1.7.1		not-accessible	RAID Volume Entry.
INT raidVolumeIndex	1.3.6.1.4.1.19046.11.1.1.13.1.7.1.1	INTEGER	read-only	This column is used to identify a particular RAID volume.
STR raidVolumeName	1.3.6.1.4.1.19046.11.1.1.13.1.7.1.2	DisplayString	read-only	The Name of a particular RAID volume.
STR raidVolumeControllerName	1.3.6.1.4.1.19046.11.1.1.13.1.7.1.3	DisplayString	read-only	The controller name of the volume.
STR raidVolumeStatus	1.3.6.1.4.1.19046.11.1.1.13.1.7.1.4	DisplayString	read-only	The Status of a particular RAID volume.
STR raidVolumeCapacity	1.3.6.1.4.1.19046.11.1.1.13.1.7.1.5	DisplayString	read-only	The Capacity of a particular RAID volume.
STR raidVolumeStripSize	1.3.6.1.4.1.19046.11.1.1.13.1.7.1.6	DisplayString	read-only	The strip size of the RAID volume.
STR raidVolumeBootable	1.3.6.1.4.1.19046.11.1.1.13.1.7.1.7	DisplayString	read-only	Whether the RAID volume is bootable.
adapters	1.3.6.1.4.1.19046.11.1.1.14
INT adapterOOBCapable	1.3.6.1.4.1.19046.11.1.1.14.1	INTEGER	read-only	If adapterOOBCapable is disabled, all the adapter information is not available.
adapterGenericTable	1.3.6.1.4.1.19046.11.1.1.14.2		not-accessible	Table of all adapters generic information
adapterGenericEntry	1.3.6.1.4.1.19046.11.1.1.14.2.1		not-accessible	Adapters generic information entry.
INT adapterGenericIndex	1.3.6.1.4.1.19046.11.1.1.14.2.1.1	INTEGER	read-only	This column is used to identify a particular PCI adapter.
STR adapterGenericVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.2.1.2	DisplayString	read-only	The Product Name of a particular PCI adapter. And if the Product Name contains PFA, PFA is in HEX.
INT adapterGenericSlotNo	1.3.6.1.4.1.19046.11.1.1.14.2.1.3	INTEGER	read-only	This Slot No. of a particular PCI adapter
STR adapterGenericLocation	1.3.6.1.4.1.19046.11.1.1.14.2.1.4	DisplayString	read-only	The Location of a particular PCI adapter.
STR adapterGenericCardInterface	1.3.6.1.4.1.19046.11.1.1.14.2.1.5	DisplayString	read-only	The Card Interface of a particular PCI adapter.
adapterNetworkFunctionTable	1.3.6.1.4.1.19046.11.1.1.14.3		not-accessible	Table of Network Function information.
adapterNetworkFunctionEntry	1.3.6.1.4.1.19046.11.1.1.14.3.1		not-accessible	Network function information entry.
INT adapterNetworkFunctionIndex	1.3.6.1.4.1.19046.11.1.1.14.3.1.1	INTEGER	read-only	This column is used to identify a particular network function.
STR adapterNetworkFunctionNetworkVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.3.1.2	DisplayString	read-only	The Product Name and PFA of a particular network function and PFA is in HEX.
STR adapterNetworkFunctionAdapterVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.3.1.3	DisplayString	read-only	The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX.
STR adapterNetworkFunctionNetworkVPDManufacturer	1.3.6.1.4.1.19046.11.1.1.14.3.1.4	DisplayString	read-only	The Manufacturer of a particular network function.
STR adapterNetworkFunctionNetworkVPDUUID	1.3.6.1.4.1.19046.11.1.1.14.3.1.5	DisplayString	read-only	The UUID of a particular network function.
STR adapterNetworkFunctionNetworkVPDModel	1.3.6.1.4.1.19046.11.1.1.14.3.1.6	DisplayString	read-only	The Model of a particular network function.
STR adapterNetworkFunctionNetworkVPDSerialNo	1.3.6.1.4.1.19046.11.1.1.14.3.1.7	DisplayString	read-only	The Serial No. of a particular network function.
STR adapterNetworkFunctionNetworkVPDFRUNo	1.3.6.1.4.1.19046.11.1.1.14.3.1.8	DisplayString	read-only	The FRU No. of a particular network function.
STR adapterNetworkFunctionNetworkVPDPartNo	1.3.6.1.4.1.19046.11.1.1.14.3.1.9	DisplayString	read-only	The Part No. of a particular network function.
STR adapterNetworkFunctionFoDUID	1.3.6.1.4.1.19046.11.1.1.14.3.1.10	DisplayString	read-only	The FoD UID of a particular network function.
INT adapterNetworkFunctionSupportHotPlug	1.3.6.1.4.1.19046.11.1.1.14.3.1.11	INTEGER	read-only	Indicates whether the network function supports hot plug.
INT adapterNetworkFunctionPhysicalPortNumber	1.3.6.1.4.1.19046.11.1.1.14.3.1.12	INTEGER	read-only	The Physical Port Number of a particular network function.
INT adapterNetworkFunctionMaxPortNumber	1.3.6.1.4.1.19046.11.1.1.14.3.1.13	INTEGER	read-only	The Max Port Number of a particular network function.
INT adapterNetworkFunctionPortNumber	1.3.6.1.4.1.19046.11.1.1.14.3.1.14	INTEGER	read-only	The Port Number of a particular network function.
INT adapterNetworkFunctionMaxDataWidth	1.3.6.1.4.1.19046.11.1.1.14.3.1.15	INTEGER	read-only	The Maximum Data Width in Gbps of a particular network funtion.
STR adapterNetworkFunctionPackageType	1.3.6.1.4.1.19046.11.1.1.14.3.1.16	DisplayString	read-only	The Package Type of a particular network function.
INT adapterNetworkFunctionPCIBusNo	1.3.6.1.4.1.19046.11.1.1.14.3.1.17	INTEGER	read-only	The PCI Bus No. of a particular network function.
INT adapterNetworkFunctionPCIDevNo	1.3.6.1.4.1.19046.11.1.1.14.3.1.18	INTEGER	read-only	The PCI Device No. of a particular network function.
INT adapterNetworkFunctionPCIFuncNo	1.3.6.1.4.1.19046.11.1.1.14.3.1.19	INTEGER	read-only	The PCI Function No. of a particular network function.
STR adapterNetworkFunctionPCIVendorId	1.3.6.1.4.1.19046.11.1.1.14.3.1.20	DisplayString	read-only	The PCI Vendor ID of a particular network function.
STR adapterNetworkFunctionPCIDevId	1.3.6.1.4.1.19046.11.1.1.14.3.1.21	DisplayString	read-only	The PCI Device ID of a particular network function.
STR adapterNetworkFunctionPCIDevType	1.3.6.1.4.1.19046.11.1.1.14.3.1.22	DisplayString	read-only	The PCI Device Type of a particular network function.
STR adapterNetworkFunctionPCIRevId	1.3.6.1.4.1.19046.11.1.1.14.3.1.23	DisplayString	read-only	The PCI Revision ID of a particular network function.
STR adapterNetworkFunctionPCISubVendorId	1.3.6.1.4.1.19046.11.1.1.14.3.1.24	DisplayString	read-only	The PCI Subsystem Vendor ID of a particular network function.
STR adapterNetworkFunctionPCISubDevId	1.3.6.1.4.1.19046.11.1.1.14.3.1.25	DisplayString	read-only	The PCI Subsystem Device ID of a particular network function.
STR adapterNetworkFunctionPCISlotDesignation	1.3.6.1.4.1.19046.11.1.1.14.3.1.26	DisplayString	read-only	The PCI Slot Designation of a particular network function.
adapterNetworkPortTable	1.3.6.1.4.1.19046.11.1.1.14.4		not-accessible	Table of Ports of Network Function information.
adapterNetworkPortEntry	1.3.6.1.4.1.19046.11.1.1.14.4.1		not-accessible	Ports of Network Function information entry.
INT adapterNetworkPortIndex	1.3.6.1.4.1.19046.11.1.1.14.4.1.1	INTEGER	read-only	This column is used to identify a particular network port.
STR adapterNetworkPortNetworkVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.4.1.2	DisplayString	read-only	The Product Name and PFA of the network function for this port and PFA is in HEX.
INT adapterNetworkPortPhyPortNo	1.3.6.1.4.1.19046.11.1.1.14.4.1.3	INTEGER	read-only	The Physical Port No. in the network function for this port.
STR adapterNetworkPortPhyPortConnector	1.3.6.1.4.1.19046.11.1.1.14.4.1.4	DisplayString	read-only	The Physical Port Connector Layout in the network function for this port.
STR adapterNetworkPortPhyPortBurnedinAddress	1.3.6.1.4.1.19046.11.1.1.14.4.1.5	DisplayString	read-only	The Physical Permanent (burned-In) Address of a particular network port.
INT adapterNetworkPortNo	1.3.6.1.4.1.19046.11.1.1.14.4.1.6	INTEGER	read-only	The Port No. of this network port in the network function.
GAU adapterNetworkPortMaxDataSize	1.3.6.1.4.1.19046.11.1.1.14.4.1.7	Gauge	read-only	The Port Max Data Size of this network port in the network function.
STR adapterNetworkPortPermanentAddress	1.3.6.1.4.1.19046.11.1.1.14.4.1.8	DisplayString	read-only	The Permanent Address of a particular network port.
STR adapterNetworkPortNetworkAddress	1.3.6.1.4.1.19046.11.1.1.14.4.1.9	DisplayString	read-only	The Network Address of a particular network port.
STR adapterNetworkPortLinkTechnology	1.3.6.1.4.1.19046.11.1.1.14.4.1.10	DisplayString	read-only	The Link Technology of a particular network port.
STR adapterNetworkPortvNICMode	1.3.6.1.4.1.19046.11.1.1.14.4.1.11	DisplayString	read-only	If the logical port vNIC mode is Virtual Fabric mode, Switch Independent mode, or Unified Fabric Protocol mode, this column returns 1(enabled), otherwise, the columen returns 0(disabled)
STR adapterNetworkPortMaxSpeed	1.3.6.1.4.1.19046.11.1.1.14.4.1.12	DisplayString	read-only	The Maximum Bandwidth in Gbps of a particular network port.
STR adapterNetworkPortProtocolType	1.3.6.1.4.1.19046.11.1.1.14.4.1.13	DisplayString	read-only	The Protocol Type of a particular network port.
STR adapterNetworkPortCurrentProtocol	1.3.6.1.4.1.19046.11.1.1.14.4.1.14	DisplayString	read-only	The Current Work Protocol of a particular network port.
STR adapterNetworkPortFCoEPermanentAddress	1.3.6.1.4.1.19046.11.1.1.14.4.1.15	DisplayString	read-only	The FCoE Permanent Address of a particular network port.
STR adapterNetworkPortFCoENetworkAddress	1.3.6.1.4.1.19046.11.1.1.14.4.1.16	DisplayString	read-only	The FCoE Network Address of a particular network port.
STR adapterNetworkPortConnectionType	1.3.6.1.4.1.19046.11.1.1.14.4.1.17	DisplayString	read-only	The Connection Type of a particular network port if its current work protocol is FC or FCoE.
STR adapterNetworkPortRole	1.3.6.1.4.1.19046.11.1.1.14.4.1.18	DisplayString	read-only	The Port Role of a particular network port if its current work protocol is FC or FCoE.
GAU adapterNetworkPortTargetRelativePortNo	1.3.6.1.4.1.19046.11.1.1.14.4.1.19	Gauge	read-only	The Target Relative Port No. of a particular network port if its current work protocol is FC or FCoE.
STR adapterNetworkPortPhyPortLinkStatus	1.3.6.1.4.1.19046.11.1.1.14.4.1.20	DisplayString	read-only	The Physical Port Link Status in the network function for this port.
STR adapterNetworkPortPhyPortLinkSpeed	1.3.6.1.4.1.19046.11.1.1.14.4.1.21	DisplayString	read-only	The Physical Port Link Speed in the network function for this port.
adapterGPUFunctionTable	1.3.6.1.4.1.19046.11.1.1.14.5		not-accessible	Table of GPU Function information.
adapterGPUFunctionEntry	1.3.6.1.4.1.19046.11.1.1.14.5.1		not-accessible	GPU function information entry.
INT adapterGPUFunctionIndex	1.3.6.1.4.1.19046.11.1.1.14.5.1.1	INTEGER	read-only	This column is used to identify a particular GPU function.
STR adapterGPUFunctionGpuVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.5.1.2	DisplayString	read-only	The Product Name and PFA of a particular GPU function and PFA is in HEX.
STR adapterGPUFunctionAdapterVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.5.1.3	DisplayString	read-only	The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX.
STR adapterGPUFunctionGpuVPDManufacturer	1.3.6.1.4.1.19046.11.1.1.14.5.1.4	DisplayString	read-only	The Manufacturer of a particular GPU function.
STR adapterGPUFunctionGpuVPDUUID	1.3.6.1.4.1.19046.11.1.1.14.5.1.5	DisplayString	read-only	The UUID of a particular GPU function.
STR adapterGPUFunctionGpuVPDModel	1.3.6.1.4.1.19046.11.1.1.14.5.1.6	DisplayString	read-only	The Model of a particular GPU function.
STR adapterGPUFunctionGpuVPDSerialNo	1.3.6.1.4.1.19046.11.1.1.14.5.1.7	DisplayString	read-only	The Serial No. of a particular GPU function.
STR adapterGPUFunctionGpuVPDFRUNo	1.3.6.1.4.1.19046.11.1.1.14.5.1.8	DisplayString	read-only	The FRU No. of a particular GPU function.
STR adapterGPUFunctionGpuVPDPartNo	1.3.6.1.4.1.19046.11.1.1.14.5.1.9	DisplayString	read-only	The Part No. of a particular GPU function.
STR adapterGPUFunctionFoDUID	1.3.6.1.4.1.19046.11.1.1.14.5.1.10	DisplayString	read-only	The FoD UID of a particular GPU function.
INT adapterGPUFunctionSupportHotPlug	1.3.6.1.4.1.19046.11.1.1.14.5.1.11	INTEGER	read-only	Indicates whether the GPU function supports hot plug.
STR adapterGPUFunctionVideoMemorySize	1.3.6.1.4.1.19046.11.1.1.14.5.1.12	DisplayString	read-only	The Video Memory Size of a particular GPU function.
STR adapterGPUFunctionVideoMemoryType	1.3.6.1.4.1.19046.11.1.1.14.5.1.13	DisplayString	read-only	The Video Memory Type of a particular GPU function.
INT adapterGPUFunctionChipNumber	1.3.6.1.4.1.19046.11.1.1.14.5.1.14	INTEGER	read-only	The Chip Number of a particular GPU function.
INT adapterGPUFunctionMaxDataWidth	1.3.6.1.4.1.19046.11.1.1.14.5.1.15	INTEGER	read-only	The Maximum Data Width in Gbps of a particular GPU funtion.
STR adapterGPUFunctionPackageType	1.3.6.1.4.1.19046.11.1.1.14.5.1.16	DisplayString	read-only	The Package Type of a particular GPU function.
INT adapterGPUFunctionPCIBusNo	1.3.6.1.4.1.19046.11.1.1.14.5.1.17	INTEGER	read-only	The PCI Bus No. of a particular GPU function.
INT adapterGPUFunctionPCIDevNo	1.3.6.1.4.1.19046.11.1.1.14.5.1.18	INTEGER	read-only	The PCI Device No. of a particular GPU function.
INT adapterGPUFunctionPCIFuncNo	1.3.6.1.4.1.19046.11.1.1.14.5.1.19	INTEGER	read-only	The PCI Function No. of a particular GPU function.
STR adapterGPUFunctionPCIVendorId	1.3.6.1.4.1.19046.11.1.1.14.5.1.20	DisplayString	read-only	The PCI Vendor ID of a particular GPU function.
STR adapterGPUFunctionPCIDevId	1.3.6.1.4.1.19046.11.1.1.14.5.1.21	DisplayString	read-only	The PCI Device ID of a particular GPU function.
STR adapterGPUFunctionPCIDevType	1.3.6.1.4.1.19046.11.1.1.14.5.1.22	DisplayString	read-only	The PCI Device Type of a particular GPU function.
STR adapterGPUFunctionPCIRevId	1.3.6.1.4.1.19046.11.1.1.14.5.1.23	DisplayString	read-only	The PCI Revision ID of a particular GPU function.
STR adapterGPUFunctionPCISubVendorId	1.3.6.1.4.1.19046.11.1.1.14.5.1.24	DisplayString	read-only	The PCI Subsystem Vendor ID of a particular GPU function.
STR adapterGPUFunctionPCISubDevId	1.3.6.1.4.1.19046.11.1.1.14.5.1.25	DisplayString	read-only	The PCI Subsystem Device ID of a particular GPU function.
STR adapterGPUFunctionPCISlotDesignation	1.3.6.1.4.1.19046.11.1.1.14.5.1.26	DisplayString	read-only	The PCI Slot Designation of a particular GPU function.
adapterGPUChipTable	1.3.6.1.4.1.19046.11.1.1.14.6		not-accessible	Table of Chips of GPU Function information.
adapterGPUChipEntry	1.3.6.1.4.1.19046.11.1.1.14.6.1		not-accessible	GPU function chip information entry.
INT adapterGPUChipIndex	1.3.6.1.4.1.19046.11.1.1.14.6.1.1	INTEGER	read-only	This column is used to identify a particular GPU chip
STR adapterGPUChipGpuVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.6.1.2	DisplayString	read-only	The Product Name and PFA of the GPU function for this chip and PFA is in HEX.
INT adapterGPUChipNo	1.3.6.1.4.1.19046.11.1.1.14.6.1.3	INTEGER	read-only	The Index of the GPU chip in the GPU adapter.
STR adapterGPUChipName	1.3.6.1.4.1.19046.11.1.1.14.6.1.4	DisplayString	read-only	The Name of a particular GPU chip.
STR adapterGPUChipFamily	1.3.6.1.4.1.19046.11.1.1.14.6.1.5	DisplayString	read-only	The Family Name of a particular GPU chip.
STR adapterGPUChipManufacturer	1.3.6.1.4.1.19046.11.1.1.14.6.1.6	DisplayString	read-only	The Manufacturer of a particular GPU chip.
INT adapterGPUChipCoresEnabled	1.3.6.1.4.1.19046.11.1.1.14.6.1.7	INTEGER	read-only	Indicates whether enable cores of a particular GPU chip.
GAU adapterGPUChipMaxClockSpeed	1.3.6.1.4.1.19046.11.1.1.14.6.1.8	Gauge	read-only	The Maximum Clock Speed in MHz of a particular GPU chip.
GAU adapterGPUChipExtBusClockSpeed	1.3.6.1.4.1.19046.11.1.1.14.6.1.9	Gauge	read-only	The External Bus Clock Speed in MHz of a particular GPU chip.
INT adapterGPUChipAddressWidth	1.3.6.1.4.1.19046.11.1.1.14.6.1.10	INTEGER	read-only	The Address Width of a particular GPU chip.
INT adapterGPUChipDataWidth	1.3.6.1.4.1.19046.11.1.1.14.6.1.11	INTEGER	read-only	The Data Width of a particular GPU chip.
STR adapterGPUChipFormFactor	1.3.6.1.4.1.19046.11.1.1.14.6.1.12	DisplayString	read-only	The Form Factor of a particular GPU chip.
STR adapterGPUChipModel	1.3.6.1.4.1.19046.11.1.1.14.6.1.13	DisplayString	read-only	The Model of a particular GPU chip.
STR adapterGPUChipSerialNo	1.3.6.1.4.1.19046.11.1.1.14.6.1.14	DisplayString	read-only	The Serial No. of a particular GPU chip.
STR adapterGPUChipFRUNo	1.3.6.1.4.1.19046.11.1.1.14.6.1.15	DisplayString	read-only	The FRU No. of a particular GPU chip.
STR adapterGPUChipPartNo	1.3.6.1.4.1.19046.11.1.1.14.6.1.16	DisplayString	read-only	The Part No. of a particular GPU chip.
STR adapterGPUChipUniqueID	1.3.6.1.4.1.19046.11.1.1.14.6.1.17	DisplayString	read-only	The Unique ID of a particular GPU chip.
adapterRAIDFunctionTable	1.3.6.1.4.1.19046.11.1.1.14.7		not-accessible	Table of RAID Function information.
adapterRAIDFunctionEntry	1.3.6.1.4.1.19046.11.1.1.14.7.1		not-accessible	RAID function information entry.
INT adapterRAIDFunctionIndex	1.3.6.1.4.1.19046.11.1.1.14.7.1.1	INTEGER	read-only	This column is used to identify a particular RAID function.
STR adapterRAIDFunctionRaidVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.7.1.2	DisplayString	read-only	The Product Name and PFA of a particular RAID function and PFA is in HEX.
STR adapterRAIDFunctionAdapterVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.7.1.3	DisplayString	read-only	The Product Name of a particular adapter providing this function. And if the Product Name contains PFA, PFA is in HEX.
STR adapterRAIDFunctionRaidVPDManufacturer	1.3.6.1.4.1.19046.11.1.1.14.7.1.4	DisplayString	read-only	The Manufacturer of a particular RAID function.
STR adapterRAIDFunctionRaidVPDUUID	1.3.6.1.4.1.19046.11.1.1.14.7.1.5	DisplayString	read-only	The UUID of a particular RAID function.
STR adapterRAIDFunctionRaidVPDModel	1.3.6.1.4.1.19046.11.1.1.14.7.1.6	DisplayString	read-only	The Model of a particular RAID function.
STR adapterRAIDFunctionRaidVPDSerialNo	1.3.6.1.4.1.19046.11.1.1.14.7.1.7	DisplayString	read-only	The Serial No. of a particular RAID function.
STR adapterRAIDFunctionRaidVPDFRUNo	1.3.6.1.4.1.19046.11.1.1.14.7.1.8	DisplayString	read-only	The FRU No. of a particular RAID function.
STR adapterRAIDFunctionRaidVPDPartNo	1.3.6.1.4.1.19046.11.1.1.14.7.1.9	DisplayString	read-only	The Part No. of a particular RAID function.
STR adapterRAIDFunctionFoDUID	1.3.6.1.4.1.19046.11.1.1.14.7.1.10	DisplayString	read-only	The FoD UID of a particular RAID function.
INT adapterRAIDFunctionSupportHotPlug	1.3.6.1.4.1.19046.11.1.1.14.7.1.11	INTEGER	read-only	Indicates whether the RAID function supports hot plug.
INT adapterRAIDFunctionMaxDataWidth	1.3.6.1.4.1.19046.11.1.1.14.7.1.12	INTEGER	read-only	The Maximum Data Width in Gbps of a particular RAID funtion.
STR adapterRAIDFunctionPackageType	1.3.6.1.4.1.19046.11.1.1.14.7.1.13	DisplayString	read-only	The Package Type of a particular RAID function.
INT adapterRAIDFunctionPCIBusNo	1.3.6.1.4.1.19046.11.1.1.14.7.1.14	INTEGER	read-only	The PCI Bus No. of a particular RAID function.
INT adapterRAIDFunctionPCIDevNo	1.3.6.1.4.1.19046.11.1.1.14.7.1.15	INTEGER	read-only	The PCI Device No. of a particular RAID function.
INT adapterRAIDFunctionPCIFuncNo	1.3.6.1.4.1.19046.11.1.1.14.7.1.16	INTEGER	read-only	The PCI Function No. of a particular RAID function.
STR adapterRAIDFunctionPCIVendorId	1.3.6.1.4.1.19046.11.1.1.14.7.1.17	DisplayString	read-only	The PCI Vendor ID of a particular RAID function.
STR adapterRAIDFunctionPCIDevId	1.3.6.1.4.1.19046.11.1.1.14.7.1.18	DisplayString	read-only	The PCI Device ID of a particular RAID function.
STR adapterRAIDFunctionPCIDevType	1.3.6.1.4.1.19046.11.1.1.14.7.1.19	DisplayString	read-only	The PCI Device Type of a particular RAID function.
STR adapterRAIDFunctionPCIRevId	1.3.6.1.4.1.19046.11.1.1.14.7.1.20	DisplayString	read-only	The PCI Revision ID of a particular RAID function.
STR adapterRAIDFunctionPCISubVendorId	1.3.6.1.4.1.19046.11.1.1.14.7.1.21	DisplayString	read-only	The PCI Subsystem Vendor ID of a particular RAID function.
STR adapterRAIDFunctionPCISubDevId	1.3.6.1.4.1.19046.11.1.1.14.7.1.22	DisplayString	read-only	The PCI Subsystem Device ID of a particular RAID function.
STR adapterRAIDFunctionPCISlotDesignation	1.3.6.1.4.1.19046.11.1.1.14.7.1.23	DisplayString	read-only	The PCI Slot Designation of a particular RAID function.
adapterFirmwareTable	1.3.6.1.4.1.19046.11.1.1.14.8		not-accessible	Table of PCI Function Firmware information.
adapterFirmwareEntry	1.3.6.1.4.1.19046.11.1.1.14.8.1		not-accessible	Adapter Firmware Entry.
INT adapterFwIndex	1.3.6.1.4.1.19046.11.1.1.14.8.1.1	INTEGER	read-only	This column is used to identify a particular function firmware.
STR adapterFwFunctionVPDProdName	1.3.6.1.4.1.19046.11.1.1.14.8.1.2	DisplayString	read-only	The Product Name and PFA of a particular function for this firmware and PFA is in HEX.
STR adapterFwName	1.3.6.1.4.1.19046.11.1.1.14.8.1.3	DisplayString	read-only	The name of a particular PCI function firmware.
STR adapterFwClassification	1.3.6.1.4.1.19046.11.1.1.14.8.1.4	DisplayString	read-only	The classification of a particular PCI function firmware.
STR adapterFwDescription	1.3.6.1.4.1.19046.11.1.1.14.8.1.5	DisplayString	read-only	The description of a particular PCI function firmware.
STR adapterFwManufacture	1.3.6.1.4.1.19046.11.1.1.14.8.1.6	DisplayString	read-only	The manufacturer of a particular PCI function firmware.
STR adapterFwVersion	1.3.6.1.4.1.19046.11.1.1.14.8.1.7	DisplayString	read-only	The version of a particular PCI function firmware.
STR adapterFwReleaseDate	1.3.6.1.4.1.19046.11.1.1.14.8.1.8	DisplayString	read-only	The release date of a particular PCI function firmware.
STR adapterFwSoftwareID	1.3.6.1.4.1.19046.11.1.1.14.8.1.9	DisplayString	read-only	The Software ID of a particular PCI function firmware.
errorLogs	1.3.6.1.4.1.19046.11.1.2
eventLog	1.3.6.1.4.1.19046.11.1.2.1
eventLogTable	1.3.6.1.4.1.19046.11.1.2.1.1		not-accessible	Table of event logs. View as a table and not as individual entries for consistent results.
eventLogEntry	1.3.6.1.4.1.19046.11.1.2.1.1.1		not-accessible	Event log entries. View as a table and not as individual entries for consistent results.
INT eventLogIndex	1.3.6.1.4.1.19046.11.1.2.1.1.1.1	INTEGER	read-only	Event log index number. View as a table and not as individual entries for consistent results.
OCT eventLogString	1.3.6.1.4.1.19046.11.1.2.1.1.1.2	OCTET STRING	read-only	Contains a string of information to detail the event. View as a table and not as individual entries for consistent results.
INT eventLogSeverity	1.3.6.1.4.1.19046.11.1.2.1.1.1.3	INTEGER	read-only	Contains a information to detail the severity of the event. View as a table and not as individual entries for consistent results.
OCT eventLogDate	1.3.6.1.4.1.19046.11.1.2.1.1.1.4	OCTET STRING	read-only	The Date of the Event occured. View as a table and not as individual entries for consistent results.
OCT eventLogTime	1.3.6.1.4.1.19046.11.1.2.1.1.1.5	OCTET STRING	read-only	The Time of the Event occured. View as a table and not as individual entries for consistent results.
configureSP	1.3.6.1.4.1.19046.11.1.3
remoteAccessConfig	1.3.6.1.4.1.19046.11.1.3.1
generalRemoteCfg	1.3.6.1.4.1.19046.11.1.3.1.1
INT remoteAlertRetryDelay	1.3.6.1.4.1.19046.11.1.3.1.1.1	INTEGER	read-only	Number in seconds to delay between retries if sending a remote alert is unsuccessful.
INT remoteAlertRetryCount	1.3.6.1.4.1.19046.11.1.3.1.1.2	INTEGER	read-only	Number of additional times a remote alert will be retried if not succesfully sent. A value of zero indicates no retries will be attempted.
INT remoteAlertEntryDelay	1.3.6.1.4.1.19046.11.1.3.1.1.3	INTEGER	read-only	Number in seconds to delay between entries if sending a remote alert is unsuccessful.
INT snmpCriticalAlerts	1.3.6.1.4.1.19046.11.1.3.1.1.4	INTEGER	read-only	If Enabled,criticalAlerts will be sent to SNMP, else critical alerts will not be sent.
INT snmpWarningAlerts	1.3.6.1.4.1.19046.11.1.3.1.1.5	INTEGER	read-only	If Enabled,warningAlerts will be sent to SNMP , else warning alerts will not be sent.
INT snmpSystemAlerts	1.3.6.1.4.1.19046.11.1.3.1.1.6	INTEGER	read-only	If Enabled,systemAlerts will be sent to SNMP , else system alerts will not be sent.
INT remoteAccessTamperDelay	1.3.6.1.4.1.19046.11.1.3.1.1.7	INTEGER	read-only	Number in minutes to prohibit a remote login attempt after more than maximum login attempts have failed. The minimum value is 0 and the maximum value is 2880 minute. The default value is 60 minutes.
INT userAuthenticationMethod	1.3.6.1.4.1.19046.11.1.3.1.1.8	INTEGER	read-only	Use this field to specify how users attempting to login should be authenticated. There are two methods: Local authentication. Userid and password are verified by searching the list of users locally configured under Local Login Profiles. LDAP based authentication. Users are authenticated via a remote LDAP server. One or both authentication methods can be selected. If both methods should be used, the order must be specified.
INT webInactivityTimeout	1.3.6.1.4.1.19046.11.1.3.1.1.9	INTEGER	read-only	The amount of time, in minutes, that a user session established with the management server can be inactive before the user is logged out. The minimum value is 0 and the maximum value is 1440 minutes. The default value is 20 minutes. If the value is 0, web session never expire.
snmpAlertFilters	1.3.6.1.4.1.19046.11.1.3.1.1.10
INT safSpTrapTempC	1.3.6.1.4.1.19046.11.1.3.1.1.10.2	INTEGER	read-only	Critical Alert: Temperature threshold exceeded.
INT safSpTrapVoltC	1.3.6.1.4.1.19046.11.1.3.1.1.10.3	INTEGER	read-only	Critical Alert: Voltage threshold exceeded.
INT safSpTrapPowerC	1.3.6.1.4.1.19046.11.1.3.1.1.10.4	INTEGER	read-only	Critical Alert: Power failure.
INT safSpTrapHdC	1.3.6.1.4.1.19046.11.1.3.1.1.10.5	INTEGER	read-only	Critical Alert: Hard disk drive failure.
INT safSpTrapFanC	1.3.6.1.4.1.19046.11.1.3.1.1.10.6	INTEGER	read-only	Critical Alert: Single Fan failure.
INT safSpTrapIhcC	1.3.6.1.4.1.19046.11.1.3.1.1.10.7	INTEGER	read-only	Critical Alert: Incompatible hardware configuration.
INT safSpTrapCPUC	1.3.6.1.4.1.19046.11.1.3.1.1.10.8	INTEGER	read-only	Critical Alert: CPU Error.
INT safSpTrapMemoryC	1.3.6.1.4.1.19046.11.1.3.1.1.10.9	INTEGER	read-only	Critical Alert: Memory Error.
INT safSpTrapRdpsC	1.3.6.1.4.1.19046.11.1.3.1.1.10.10	INTEGER	read-only	Critical Alert: Redundant Power Supply failure.
INT safSpTrapHardwareC	1.3.6.1.4.1.19046.11.1.3.1.1.10.11	INTEGER	read-only	Critical Alert: Other Failure - refer to Message ID for specific condition.
INT safSpTrapRdpsN	1.3.6.1.4.1.19046.11.1.3.1.1.10.12	INTEGER	read-only	Non-Critical Alert: Redundant Power Supply failure.
INT safSpTrapTempN	1.3.6.1.4.1.19046.11.1.3.1.1.10.13	INTEGER	read-only	Non-Critical Alert: Temperature threshold exceeded.
INT safSpTrapVoltN	1.3.6.1.4.1.19046.11.1.3.1.1.10.14	INTEGER	read-only	Non-Critical Alert: Voltage threshold exceeded.
INT safSpTrapPowerN	1.3.6.1.4.1.19046.11.1.3.1.1.10.15	INTEGER	read-only	Non-Critical Alert: Power.
INT safSpTrapFanN	1.3.6.1.4.1.19046.11.1.3.1.1.10.16	INTEGER	read-only	Non-Critical Alert: Fan Error.
INT safSpTrapCPUN	1.3.6.1.4.1.19046.11.1.3.1.1.10.17	INTEGER	read-only	Non-Critical Alert: Memory Error.
INT safSpTrapMemoryN	1.3.6.1.4.1.19046.11.1.3.1.1.10.18	INTEGER	read-only	Non-Critical Alert: Memory Error.
INT safSpTrapHardwareN	1.3.6.1.4.1.19046.11.1.3.1.1.10.19	INTEGER	read-only	Non-Critical Alert: Warning - refer to Message ID for specific condition.
INT safSpTrapRLogin	1.3.6.1.4.1.19046.11.1.3.1.1.10.20	INTEGER	read-only	Sev-Off Alert: Event Remote Login.
INT safSpTrapOsToS	1.3.6.1.4.1.19046.11.1.3.1.1.10.21	INTEGER	read-only	System Alert: OS Timeout value exceeded.
INT safSpTrapAppS	1.3.6.1.4.1.19046.11.1.3.1.1.10.22	INTEGER	read-only	System Alert: Application Alert. Refer to Message ID for specific condition.
INT safSpTrapPowerS	1.3.6.1.4.1.19046.11.1.3.1.1.10.23	INTEGER	read-only	System Alert: Power on or off.
INT safSpTrapBootS	1.3.6.1.4.1.19046.11.1.3.1.1.10.24	INTEGER	read-only	System Alert: System Boot Failure.
INT safSpTrapLdrToS	1.3.6.1.4.1.19046.11.1.3.1.1.10.25	INTEGER	read-only	System Alert: OS Loader Timeout.
INT safSpTrapPFAS	1.3.6.1.4.1.19046.11.1.3.1.1.10.26	INTEGER	read-only	System Alert: Predictive Failure Analysis(PFA) information.
INT safSpTrapSysLogS	1.3.6.1.4.1.19046.11.1.3.1.1.10.27	INTEGER	read-only	System Alert: System Log 75% full.
INT safSpTrapNwChangeS	1.3.6.1.4.1.19046.11.1.3.1.1.10.28	INTEGER	read-only	System Alert: Network change notification.
customSecuritySettings	1.3.6.1.4.1.19046.11.1.3.1.1.20
INT passwordExpirationWarningPeriod	1.3.6.1.4.1.19046.11.1.3.1.1.20.1	INTEGER	read-only	The amount of time, in days, before password expiration that users will begin to receive warnings about the impending expiration of the user password. The minimum value is 0 and the maximum value is the maximum password expiration period. The default value is 5 days. A value of 0 means that the users are never warned.
INT passwordExpirationPeriod	1.3.6.1.4.1.19046.11.1.3.1.1.20.2	INTEGER	read-only	The amount of time, in days, that a user may use a password before it must be changed. Smaller values reduce the amount of time for attackers to guess passwords. The minimum value is 0 and the maximum value is 365 days. The default value is 90 days. A value of 0 means that the password never expire.
INT minimumPasswordReuseCycle	1.3.6.1.4.1.19046.11.1.3.1.1.20.3	INTEGER	read-only	The minimum number of the times that a user must enter a unique password before the user can start to reuse passwords. A higher number enhances security. The minimum value is 0 and the maximum value is 10 times. The default value is 5 times. A value of 0 means that passwords may be reused immediately.
INT minimumPasswordLength	1.3.6.1.4.1.19046.11.1.3.1.1.20.5	INTEGER	read-only	The minimum number of characters that can be used to specify a valid password. The minimum value is 8 characters and the maximum value is 20 characters. The default value is 8 characters.
INT defaultAdminPasswordExpired	1.3.6.1.4.1.19046.11.1.3.1.1.20.6	INTEGER	read-only	A value of 1 means that the factory default 'USERID' account password must be changed on next login. A value of 0 means that there is no such requirement. The default value is 0.
INT changePasswordFirstAccess	1.3.6.1.4.1.19046.11.1.3.1.1.20.8	INTEGER	read-only	A value of 1 means that a user is required to change the password when the user logs in to the management server for the first time. A value of 0 means no such requirment. The default value is 1.
INT accountLockoutPeriod	1.3.6.1.4.1.19046.11.1.3.1.1.20.9	INTEGER	read-only	The minimum about of time, in minutes, that must pass before a user that was locked out can attempt to log back in again. The minimum value is 0 and the maximum value is 2880 minutes. The default value is 60 minutes. A value of 0 can make your system more exposed to serious denial of service attacks, where deliberate failed login attempts can leave accounts permanently locked.
INT maxLoginFailures	1.3.6.1.4.1.19046.11.1.3.1.1.20.10	INTEGER	read-only	The maximum number of times that a user can attempt to log in with an incorrect password before the user account is locked out. The number specified for the lockout period after maximum login failures determines how long the user account is locked out. Accounts that are locked cannot be used to gain access to the system even if a valid password is provided. The maximum value is 10 times. The default value is 5 times. A value of 0 means that accounts are never locked.
INT passwordChangeInterval	1.3.6.1.4.1.19046.11.1.3.1.1.20.11	INTEGER	read-only	The minimum about of time, in hours, that must elapse before a user may change a password again after it has been changed once. The value specified for this setting would not exceed the value specified for the password expiration period. A small value allows users to more quickly use old passwords. The range of acceptable values will be from 0 to 240 hours. The default value is 24 hours. If the value is 0, passwords may be changed immediately.
serialPortCfg	1.3.6.1.4.1.19046.11.1.3.1.2
INT portBaud	1.3.6.1.4.1.19046.11.1.3.1.2.1	INTEGER	read-only	Baud rate for the serial port.
INT portParity	1.3.6.1.4.1.19046.11.1.3.1.2.2	INTEGER	read-only	Parity setting for the serial port.
serialRedirect	1.3.6.1.4.1.19046.11.1.3.1.2.3
OCT enterCLIkeySeq	1.3.6.1.4.1.19046.11.1.3.1.2.3.1	OCTET STRING	read-only	This is the keystroke sequence used to enter the CLI. This sequence must have at least one character. The caret symbol (^) has a special meaning in this sequence. It denotes 'Ctrl' for keystrokes that map to Ctrl sequences (for example, ^[ for the escape key and ^M for carriage return). All ocurrences of ^ will be interpreted as part of a Ctrl sequence. Refer to an ASCII-to-key conversion table for a complete list of Ctrl sequences. The default value for this field is '^[(' i.e. ESC followed by (.
INT portStopBits	1.3.6.1.4.1.19046.11.1.3.1.2.4	INTEGER	read-only	Number of stop bits for the serial port.
INT portCLImode	1.3.6.1.4.1.19046.11.1.3.1.2.18	INTEGER	read-only	Use this field to select the CLI (command line interface) mode for this port. The CLI mode disablies serial redirect, or pecifies the type of keystroke sequences to use for entering (returning to) the CLI from the system console.
remoteAlertIds	1.3.6.1.4.1.19046.11.1.3.1.3
remoteAlertIdsTable	1.3.6.1.4.1.19046.11.1.3.1.3.1		not-accessible	Table of remote alert entries. This table lets you configure remote alert recipients. You can define up to 12 unique recipients.
remoteAlertIdsEntry	1.3.6.1.4.1.19046.11.1.3.1.3.1.1		not-accessible	Remote alert entries.
INT remoteAlertIdEntryIndex	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.1	INTEGER	read-only	Index for remote alert entry.
INT remoteAlertIdEntryStatus	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.2	INTEGER	read-only	If enabled alerts will be sent to this alert recipient else alerts will not be sent.
OCT remoteAlertIdEntryName	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.3	OCTET STRING	read-only	A null terminated string that contains a text description of this entry.
OCT remoteAlertIdEmailAddr	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.4	OCTET STRING	read-only	A null terminated string that contains a E-Mail Address. For example 'jeb@us.lenovo.com'. Used only for a E-mail over Lan.
INT remoteAlertIdEntryCriticalAlert	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.5	INTEGER	read-only	If Enabled,criticalAlerts will be sent to this remote alert receipient,else critical alerts will not be sent.
INT remoteAlertIdEntryWarningAlert	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.6	INTEGER	read-only	If Enabled,warningAlerts will be sent to this remote alert receipient,else warningAlerts will not be sent.
INT remoteAlertIdEntrySystemAlert	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.7	INTEGER	read-only	If Enabled,systemAlerts will be sent to this remote alert receipient,else systemAlerts will not be sent.
INT remoteAlertIdEntryAuditAlert	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.8	INTEGER	read-only	If Enabled,systemAlerts will be sent to this remote alert receipient,else systemAlerts will not be sent.
INT remoteAlertIdEntryAttachmentsToEmailAlerts	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.9	INTEGER	read-only	Indicates if the event log should be attached to a email alert.
INT remoteAlertIdEntrySyslogPortAssignment	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.10	INTEGER	read-only	Syslog port number.
OCT remoteAlertIdEntrySyslogHostname	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.11	OCTET STRING	read-only	Syslog hostname or IP address.
INT remoteAlertIdEntryType	1.3.6.1.4.1.19046.11.1.3.1.3.1.1.12	INTEGER	read-only	Alert recipient type.
remoteAlertFiltersTable	1.3.6.1.4.1.19046.11.1.3.1.3.2		not-accessible	Table of Alert Filters. The entries (rows) in this table correspond 1-1 with the entries in the remoteAlertIdsTable. They are correlated by index.
remoteAlertFiltersEntry	1.3.6.1.4.1.19046.11.1.3.1.3.2.1		not-accessible	Remote Filters entries.
INT rafIndex	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.1	INTEGER	read-only	Index for User Authority Level entry.
INT rafSpTrapTempC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.2	INTEGER	read-only	Critical Alert: Temperature threshold exceeded.
INT rafSpTrapVoltC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.3	INTEGER	read-only	Critical Alert: Voltage threshold exceeded.
INT rafSpTrapPowerC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.4	INTEGER	read-only	Critical Alert: Power failure.
INT rafSpTrapHdC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.5	INTEGER	read-only	Critical Alert: Hard disk drive failure.
INT rafSpTrapFanC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.6	INTEGER	read-only	Critical Alert: Single Fan failure.
INT rafSpTrapIhcC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.7	INTEGER	read-only	Critical Alert: Incompatible hardware configuration.
INT rafSpTrapCPUC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.8	INTEGER	read-only	Critical Alert: CPU Error.
INT rafSpTrapMemoryC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.9	INTEGER	read-only	Critical Alert: Memory Error.
INT rafSpTrapRdpsC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.10	INTEGER	read-only	Critical Alert: Redundant Power Supply failure.
INT rafSpTrapHardwareC	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.11	INTEGER	read-only	Critical Alert: Other Failure - refer to Message ID for specific condition.
INT rafSpTrapRdpsN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.12	INTEGER	read-only	Non-Critical Alert: Redundant Power Supply failure.
INT rafSpTrapTempN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.13	INTEGER	read-only	Non-Critical Alert: Temperature threshold exceeded.
INT rafSpTrapVoltN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.14	INTEGER	read-only	Non-Critical Alert: Voltage threshold exceeded.
INT rafSpTrapPowerN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.15	INTEGER	read-only	Non-Critical Alert: Power.
INT rafSpTrapFanN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.16	INTEGER	read-only	Non-Critical Alert: Fan Error.
INT rafSpTrapCPUN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.17	INTEGER	read-only	Non-Critical Alert: Memory Error.
INT rafSpTrapMemoryN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.18	INTEGER	read-only	Non-Critical Alert: Memory Error.
INT rafSpTrapHardwareN	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.19	INTEGER	read-only	Non-Critical Alert: Warning - refer to Message ID for specific condition.
INT rafSpTrapRLogin	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.20	INTEGER	read-only	Sev-Off Alert: Event Remote Login.
INT rafSpTrapOsToS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.21	INTEGER	read-only	System Alert: OS Timeout value exceeded.
INT rafSpTrapAppS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.22	INTEGER	read-only	System Alert: Application Alert. Refer to Message ID for specific condition.
INT rafSpTrapPowerS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.23	INTEGER	read-only	System Alert: Power On or Off.
INT rafSpTrapBootS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.24	INTEGER	read-only	System Alert: System Boot Failure.
INT rafSpTrapLdrToS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.25	INTEGER	read-only	System Alert: OS Loader Timeout.
INT rafSpTrapPFAS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.26	INTEGER	read-only	System Alert: Predictive Failure Analysis(PFA) information.
INT rafSpTrapSysLogS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.27	INTEGER	read-only	System Alert: System Log 75% full.
INT rafSpTrapNwChangeS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.28	INTEGER	read-only	System Alert: Network change notification.
INT rafSpTrapAllAuditS	1.3.6.1.4.1.19046.11.1.3.1.3.2.1.29	INTEGER	read-only	System Alert: All Audit Events notification.
remoteAccessIds	1.3.6.1.4.1.19046.11.1.3.1.4
remoteAccessIdsTable	1.3.6.1.4.1.19046.11.1.3.1.4.1		not-accessible	Table of remote access profiles. This table lets you to configure all login profiles. You can define up to 12 unique profiles. Note: By default, the remote supervisor adapter comes configured with one login profile that allows remote access using a login ID of 'USERID' and a password of 'PASSW0RD' (the 0 is a zero). To avoid a potential security exposure, we strongly recommend that you change this default Login Profile to values of your choice.
remoteAccessIdsEntry	1.3.6.1.4.1.19046.11.1.3.1.4.1.1		not-accessible	Remote access entries.
INT remoteAccessIdEntryIndex	1.3.6.1.4.1.19046.11.1.3.1.4.1.1.1	INTEGER	read-only	Index for Remote access entry.
OCT remoteAccessIdEntryUserId	1.3.6.1.4.1.19046.11.1.3.1.4.1.1.2	OCTET STRING	read-only	Remote access entry null terminated string that contains the user-id. This can only be modified from blank to non-blank, then back to blank.
INT remoteAccessIdEntryUserPwdLeftDays	1.3.6.1.4.1.19046.11.1.3.1.4.1.1.3	INTEGER	read-only	left days before password expired for selected user
remoteAccessUserAuthorityLevelTable	1.3.6.1.4.1.19046.11.1.3.1.4.2		not-accessible	Table of user authority level profiles.
remoteAccessUserAuthorityLevelEntry	1.3.6.1.4.1.19046.11.1.3.1.4.2.1		not-accessible	User authority level entries.
INT ualIndex	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.1	INTEGER	read-only	Index for User Authority Level entry.
OCT ualId	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.2	OCTET STRING	read-only	User ID
INT ualSupervisor	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.3	INTEGER	read-only	User has no restrictions.
INT ualReadOnly	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.4	INTEGER	read-only	User has only read-only access, and cannot perform any save, modify, clear, or state affecting operations (eg. restart XCC, restore defaults, upgrade the firmware, etc.).
INT ualAccountManagement	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.5	INTEGER	read-only	It is custom user authority level. User can add/modify/delete users and change the global login settings in the Login Profiles panel. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
INT ualConsoleAccess	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.6	INTEGER	read-only	It is custom user authority level. User can access the remote console. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
INT ualConsoleAndVirtualMediaAccess	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.7	INTEGER	read-only	It is custom user authority level. User can access both the remote console and the virtual media feature. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
INT ualServerPowerAccess	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.8	INTEGER	read-only	It is custom user authority level. User can access the power on and restart functions for the remote server. These functions are available via the Power/Restart panel. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
INT ualAllowClearLog	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.9	INTEGER	read-only	It is custom user authority level. User can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the logs. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
INT ualAdapterBasicConfig	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.10	INTEGER	read-only	It is custom user authority level. User can modify configuration parameters in the System Settings and Alerts panels. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
INT ualAdapterNetworkAndSecurityConfig	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.11	INTEGER	read-only	It is custom user authority level. User can modify configuration parameters in the Security, Network Protocols, Network Interface, Port Assignments, and Serial Port panels. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
INT ualAdapterAdvancedConfig	1.3.6.1.4.1.19046.11.1.3.1.4.2.1.12	INTEGER	read-only	It is custom user authority level. User has no restrictions when configuring the adapter. In addition, the user is said to have administrative access to the XCC, meaning that the user can also perform the following advanced functions: firmware upgrades, PXE network boot, restore adapter factory defaults, modify and restore adapter configuration from a configuration file, and restart/reset the adapter. NOTE: The value is meaningless for this MIB object if the ualSupervisor or ualReadOnly is enabled.
groupProfiles	1.3.6.1.4.1.19046.11.1.3.1.5
groupIdsTable	1.3.6.1.4.1.19046.11.1.3.1.5.1		not-accessible	Table of Group profiles. This table lets you to configure all group profiles. You can define up to 16 unique profiles.
groupIdsEntry	1.3.6.1.4.1.19046.11.1.3.1.5.1.1		not-accessible	Group ID entries.
INT groupIndex	1.3.6.1.4.1.19046.11.1.3.1.5.1.1.1	INTEGER	read-only	Index for Group IDs entry.
OCT groupId	1.3.6.1.4.1.19046.11.1.3.1.5.1.1.2	OCTET STRING	read-only	Group ID. It is a null terminated string that contains the group-id. It must not be a duplicate of any previously configured ones.
OCT groupRole	1.3.6.1.4.1.19046.11.1.3.1.5.1.1.3	OCTET STRING	read-only	Group Role. It indicates if the group has supervisor, operator, or custom access.
groupRBSroleTable	1.3.6.1.4.1.19046.11.1.3.1.5.2		not-accessible	Table of Group Role profiles.
groupRBSroleEntry	1.3.6.1.4.1.19046.11.1.3.1.5.2.1		not-accessible	Group Role entries.
INT groupRBSroleIndex	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.1	INTEGER	read-only	Index for Group Role entry.
OCT groupRBSroleId	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.2	OCTET STRING	read-only	Group ID
INT groupRBSSupervisor	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.3	INTEGER	read-only	Group has no restrictions.
INT groupRBSOperator	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.4	INTEGER	read-only	Group has read-only access, and cannot perform any save, modify, clear, or state affecting operations (e.g. restart XCC, restore defaults, upgrade the firmware, etc.).
INT groupRBSNetworkSecurity	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.5	INTEGER	read-only	Group can modify the configuration in the Security, Network Protocols, Network Interface, Port Assignments, and Serial Port panels.
INT groupRBSUserAccountManagement	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.6	INTEGER	read-only	Group can add/modify/delete users and change the Global Login Settings in the Login Profiles panel.
INT groupRBSRemoteConsoleAccess	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.7	INTEGER	read-only	Group can access the remote server console.
INT groupRBSRemoteConsoleRemoteDiskAccess	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.8	INTEGER	read-only	Group can access the remote server console and the remote disk functions for the remote server.
INT groupRBSServerPowerRestartAccess	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.9	INTEGER	read-only	Group can access the power on, restart and server timeout functions for the remote server.
INT groupRBSBasicAdapterConfiguration	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.10	INTEGER	read-only	Group can modify configuration parameters in the System Settings (excluding Contact, Location and Server Timeouts) and Alerts panels.
INT groupRBSClearEventLog	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.11	INTEGER	read-only	Group can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the logs.
INT groupRBSAdvancedAdapterConfiguration	1.3.6.1.4.1.19046.11.1.3.1.5.2.1.12	INTEGER	read-only	Group has no restrictions when configuring the adapter. In addition the user is said to have administrative access to the XCC, meaning that the user can also perform the following advanced functions: firmware upgrades, PXE network boot, restore adapter factory defaults, modify and restore adapter configuration from a configuration file, and restart/reset the adapter. This excludes Server Power/Restart Control and timeout functions.
sshClientAuth	1.3.6.1.4.1.19046.11.1.3.1.6
sshClientAuthPubKeyTable	1.3.6.1.4.1.19046.11.1.3.1.6.1		not-accessible	A table that contains client authentication public key information.
sshClientAuthPubKeyEntry	1.3.6.1.4.1.19046.11.1.3.1.6.1.1		not-accessible	A information list about a particular SSH public key used for client authentication. The primary table index is the same value as the associated remoteAccessIdEntryIndex. The secondary table index allows selection of the Nth public key for that remoteAccessIdEntryIndex.
INT sshClientAuthRemoteAccessIdIndex	1.3.6.1.4.1.19046.11.1.3.1.6.1.1.1	INTEGER	not-accessible	The primary table index is the same value as the associated remoteAccessIdEntryIndex used as an index into the remoteAccessIdsTable.
INT sshClientAuthPubKeyIndex	1.3.6.1.4.1.19046.11.1.3.1.6.1.1.2	INTEGER	not-accessible	The secondary table index used to select one of the client authentication public keys for a particular remote access Id. The index is an integer value from 1 to N where N is the number of keys associated with a particular remote access Id. An addition always causes the value of N to increase by one, effectively adding an entry after the existing keys for that remote access Id. The underlying SSH server implementation searches the keys in order from 1 to N when attempting public key authentication. NOTE:A maximum of 4 public keys can be installed for one remote access Id.
INT sshClientAuthPubKeyType	1.3.6.1.4.1.19046.11.1.3.1.6.1.1.3	INTEGER	read-only	The type of the SSH public key represented by this entry.
INT sshClientAuthPubKeySize	1.3.6.1.4.1.19046.11.1.3.1.6.1.1.4	INTEGER	read-only	The size of the SSH public key represented by this entry.
OCT sshClientAuthPubKeyFingerprint	1.3.6.1.4.1.19046.11.1.3.1.6.1.1.5	OCTET STRING	read-only	The RSA fingerprint of the SSH public key represented by this entry. This value can be used with the SSH client to verify, on the initial connection, that the Secure Shell server responding to the request is the server running on the managed entity. This is the fingerprint of the operational host key pair. If the key pair represented by this entry is not operational then sixteen null octets must be returned.
OCT sshClientAuthPubKeyAcceptFrom	1.3.6.1.4.1.19046.11.1.3.1.6.1.1.6	OCTET STRING	read-only	This is a filter that describes the set of SSH client IP addresses and host names that can establish SSH connections to the AMM authenticated by the public key represented by this entry of the table. The filter is a comma-separated list of IP addresses and/or hostnames. A question mark may be used to match any single character. An asterisk may be used to match multiple characters. An exclamation point may preceed an IP address or hostname to deny acccess from that IP address or hostname. The format of the Accept From specification is: from=PATTERN-LIST PATTERN-LIST is the filter, which must be enclosed in double quotation marks.
INT sshClientAuthPubKeyUnused	1.3.6.1.4.1.19046.11.1.3.1.6.2	INTEGER	read-only	The number of available storage locations that may be used to install additional Client Authentication Public Keys. This number decreases by one when a new key is added to the configuration.
spClock	1.3.6.1.4.1.19046.11.1.3.2
OCT spClockDateAndTimeSetting	1.3.6.1.4.1.19046.11.1.3.2.1	OCTET STRING	read-only	Display XCC clock date and time setting, The format of the value is month/day/year, hour:minutes:seconds.
OCT spClockTimezoneSetting	1.3.6.1.4.1.19046.11.1.3.2.2	OCTET STRING	read-only	Display XCC clock Greenwich Mean Time(GMT) offset and Daylight Saving Time(DST) settings. The following table lists GMT offsets and associated DST information. DST is not observed in time zones where the 'Observe DST' value does not contain 'yes' in the table. Also, note that in some cases additional information is required to determine the clock adjustment when DST is observed. Examples -If the GMT offset is +3:30, the value is:'+3:30,no' -For Eastern Standard Time and observing DST, the value is:'-5:00,yes' -For Turkey and observing DST, the value is:'+2:00,yes,3' GMT Observe Additional Offset DST? DST value ______ _______ __________ GMT+0 yes \| no GMT+1 yes \| no GMT+2 yes \| no When 'Observe DST?' value is 'yes': '1' Europe/Eastern Europe (ee) '3' Turkey (tky) '4' Asia/Beirut (bei) '5' Asia/Amman (amm) '6' Asia/Jerusalem (jem) GMT+3 yes \| no GMT+3:30 yes \| no GMT+4 no GMT+4:30 no GMT+5 no GMT+5:30 no GMT+5:45 no GMT+6 no GMT+6:30 no GMT+7 no GMT+8 no GMT+9 no GMT+9:30 yes \| no GMT+10 yes \| no GMT+11 no GMT+12 yes \| no GMT+13 no GMT-12 no GMT-11 yes \| no GMT-10 no GMT-9 yes \| no GMT-8 yes \| no GMT-7 yes \| no When 'Observe DST?' value is 'yes': '7' US/Mountain (mtn) '8' America/Mazatlan (maz) GMT-6 yes \| no When 'Observe DST?' value is 'yes': '9' America/Mexico City (mex) '10' Canada/Central (cna) GMT-5 yes \| no When 'Observe DST?' value is 'yes': '11' Cuba (cub) GMT-4:30 no GMT-4 yes \| no When 'Observe DST?' value is 'yes': '13' America/Asuncion (asu) '14' America/Cuiaba (cui) '15' America/Santiago (san) '16' Canada/Atlantic (cat) GMT-3:30 yes \| no GMT-3 yes \| no When 'Observe DST?' value is 'yes': '17' America/Gothab (gtb) '19' Brazil/East (bre) GMT-2 no GMT-1 yes \| no
spIdentification	1.3.6.1.4.1.19046.11.1.3.3
OCT spTxtId	1.3.6.1.4.1.19046.11.1.3.3.1	OCTET STRING	read-only	XCC text ID.
STR spRoomID	1.3.6.1.4.1.19046.11.1.3.3.2	DisplayString	read-only	Room where the system is located.
STR spRackID	1.3.6.1.4.1.19046.11.1.3.3.3	DisplayString	read-only	ID for Rack that contains this system.
STR spRackUnitPosition	1.3.6.1.4.1.19046.11.1.3.3.4	DisplayString	read-only	Position within the rack for this system.
STR spRackUnitHeight	1.3.6.1.4.1.19046.11.1.3.3.5	DisplayString	read-only	Number of rack units occupied by this system.
STR spRackBladeBay	1.3.6.1.4.1.19046.11.1.3.3.6	DisplayString	read-only	Bay number for system contained in a blade chassis.
STR spFullPostalAddress	1.3.6.1.4.1.19046.11.1.3.3.7	DisplayString	read-only	A NULL terminated 300 byte string that contains the full postal address for this system.
networkConfiguration	1.3.6.1.4.1.19046.11.1.3.4
networkInterfaces	1.3.6.1.4.1.19046.11.1.3.4.1
ethernetInterface	1.3.6.1.4.1.19046.11.1.3.4.1.1
OCT ethernetInterfaceType	1.3.6.1.4.1.19046.11.1.3.4.1.1.1	OCTET STRING	read-only	The type of interface. Indicates 'Ethernet-1'.
INT ethernetInterfaceEnabled	1.3.6.1.4.1.19046.11.1.3.4.1.1.2	INTEGER	read-only	Disable or enable the interface.
OCT ethernetInterfaceHostName	1.3.6.1.4.1.19046.11.1.3.4.1.1.3	OCTET STRING	read-only	Contains the 64 byte null terminated DNS host name for this interface.
IP ethernetInterfaceIPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.1.4	IpAddress	read-only	Contains the IP address for the ethernet interface.
INT ethernetInterfaceAutoNegotiate	1.3.6.1.4.1.19046.11.1.3.4.1.1.5	INTEGER	read-only	If this is enabled, then we should ignore Speed/Duplex.
INT ethernetInterfaceDataRate	1.3.6.1.4.1.19046.11.1.3.4.1.1.6	INTEGER	read-only	Specifies the data transfer rate to be used over the ethernet interface 10Mb/100Mb/Auto. Note that the value of this variable is ignored if ethernetInterfaceAutoNegotiate is set to enabled(0).
INT ethernetInterfaceDuplexSetting	1.3.6.1.4.1.19046.11.1.3.4.1.1.7	INTEGER	read-only	Specifies the duplex settings for the data transfer rate to be used over the ethernet interface Half/Full/Auto.
OCT ethernetInterfaceLAA	1.3.6.1.4.1.19046.11.1.3.4.1.1.8	OCTET STRING	read-only	Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value must be in the form XX:XX:XX:XX:XX:XX where 'X' is a number between 0 - 9 and A - F. This XCC subsystem does not allow use of a multicast address. A multicast address has the least significant bit of the first byte set to a 1. The first byte must, therefore, be an even number.
INT ethernetInterfaceDhcpEnabled	1.3.6.1.4.1.19046.11.1.3.4.1.1.9	INTEGER	read-only	Disable or enable DHCP on this interface.
IP ethernetInterfaceGatewayIPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.1.10	IpAddress	read-only	Contains the IP address of the gateway/router for the ethernet interface.
OCT ethernetInterfaceBIA	1.3.6.1.4.1.19046.11.1.3.4.1.1.11	OCTET STRING	read-only	Specifies the burned-in MAC (BIA) address.
INT ethernetInterfaceMTU	1.3.6.1.4.1.19046.11.1.3.4.1.1.12	INTEGER	read-only	Contains the Maximum Transmission Unit(MTU) for the ethernet interface
IP ethernetInterfaceSubnetMask	1.3.6.1.4.1.19046.11.1.3.4.1.1.13	IpAddress	read-only	Contains the Subnet Mask for the ethernet interface
dhcpEthernetInterface	1.3.6.1.4.1.19046.11.1.3.4.1.1.14
OCT dhcpHostName	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.1	OCTET STRING	read-only	Contains the 64 byte null terminated DNS host name for this interface, assigned by the DHCP server.
IP dhcpIPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.2	IpAddress	read-only	Contains the IP address for the ehternet interface, assigned by the DHCP server.
IP dhcpGatewayIPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.3	IpAddress	read-only	Contains the IP address of the gateway/router for the ethernet interface, assigned by the DHCP server.
IP dhcpSubnetMask	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.4	IpAddress	read-only	Contains the Subnet Mask for the ethernet interface, assigned by the DHCP server.
OCT dhcpDomainName	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.5	OCTET STRING	read-only	Contains the 64 byte null terminated Domain Name for this interface, assigned by the DHCP server.
IP dhcpPrimaryDNSServer	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.6	IpAddress	read-only	Contains the Primary DNS server, assigned by the DHCP server.
IP dhcpSecondaryDNSServer	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.7	IpAddress	read-only	Contains the Secondary DNS server, assigned by the DHCP server.
IP dhcpTertiaryDNSServer	1.3.6.1.4.1.19046.11.1.3.4.1.1.14.8	IpAddress	read-only	Contains the tertiary DNS server, assigned by the DHCP server.
INT ethernetInterfaceVlan	1.3.6.1.4.1.19046.11.1.3.4.1.1.15	INTEGER	read-only	If this is enabled, assign VLAN ID needs to be assigned. NOTE: This is not supported on blades.
INT ethernetInterfaceVlanID	1.3.6.1.4.1.19046.11.1.3.4.1.1.16	INTEGER	read-only	Contains the VLAN ID for the ethernet interface. NOTE: This is not supported in blades.
ethernetInterfaceIPv6	1.3.6.1.4.1.19046.11.1.3.4.1.4
INT ethernetInterfaceIPv6Enabled	1.3.6.1.4.1.19046.11.1.3.4.1.4.2	INTEGER	read-only	The current IPv6 enabled or disabled state of this XCC. NOTE: If IPv6 address(es) have been configured for one or more interfaces/protocols/services on this XCC, when you update the firmware to a level which does not support IPv6, all IPv6 connectivity will be lost, and services/interfaces for which an IPv6 address was configured may not function properly. You will be required to reconfigure these services/interfaces.
ethernetInterfaceIPv6Config	1.3.6.1.4.1.19046.11.1.3.4.1.4.5
ethernetInterfaceIPv6LocalAddress	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.1
ADR ethernetInterfaceIPv6LinkLocalAddress	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.1.1	InetAddressIPv6	read-only	The IPv6 link local IP address for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:0:0'.
ethernetInterfaceIPv6StaticIPConfig	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2
INT ethernetInterfaceIPv6StaticIPConfigEnabled	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.1	INTEGER	read-only	The IPv6 static IP address enabled or disabled state for the ethernet interface.
ADR ethernetInterfaceIPv6StaticIPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.2	InetAddressIPv6	read-only	The IPv6 static IP address for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:0:0'.
INT ethernetInterfaceIPv6StaticIPAddressPrefixLen	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.3	INTEGER	read-only	The IPv6 static IP address prefix length for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value 0.
ADR ethernetInterfaceIPv6StaticIPDefaultRoute	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.2.4	InetAddressIPv6	read-only	The IPv6 static IP address default route for the ethernet interface. NOTE: If ethernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:0:0'.
ethernetInterfaceIPv6AutoIPConfig	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3
ethernetInterfaceDHCPv6Config	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2
INT ethernetInterfaceDHCPv6Enabled	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.1	INTEGER	read-only	The DHCPv6 enabled or disabled state for the ethernet interface.
ADR ethernetInterfaceDHCPv6IPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.2	InetAddressIPv6	read-only	The IPv6 address for the ethernet interface, assigned by DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server is not available, this object has the value '0:0:0:0:0:0:0:0'.
OCT ethernetInterfaceDHCPv6DomainName	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.4	OCTET STRING	read-only	The 64 byte Domain Name for the ethernet interface, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server is not available, this object has the value '(Not available)'.
ADR ethernetInterfaceDHCPv6PrimaryDNSServer	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.5	InetAddressIPv6	read-only	The primary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server is not available, this object has the value '0:0:0:0:0:0:0:0'.
ADR ethernetInterfaceDHCPv6SecondaryDNSServer	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.6	InetAddressIPv6	read-only	The secondary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server is not available, this object has the value '0:0:0:0:0:0:0:0'.
ADR ethernetInterfaceDHCPv6TertiaryDNSServer	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.7	InetAddressIPv6	read-only	The tertiary DNS server, assigned by the DHCPv6 server. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server is not available, this object has the value '0:0:0:0:0:0:0:0'.
ADR ethernetInterfaceDHCPv6Server	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.2.8	InetAddressIPv6	read-only	The DHCPv6 server IPv6 address used to acquire the DHCP settings. NOTE: If ethernetInterfaceIPv6Enabled or ethernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 server is not available, this object has the value '0:0:0:0:0:0:0:0'.
ethernetInterfaceIPv6StatelessAutoConfig	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3
INT ethernetInterfaceIPv6StatelessAutoConfigEnabled	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.1	INTEGER	read-only	The IPv6 stateless auto-configuration enabled or disabled state for the ethernet interface.
ethernetInterfaceStatelessAutoConfigAddressesTable	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2		not-accessible	Table of stateless Auto-Config addresses entries
ethernetInterfaceStatelessAutoConfigAddressesEntry	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1		not-accessible	Stateless Auto-Config address entries
INT ethernetInterfaceStatelessAutoConfigAddressesIndex	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1.1	INTEGER	read-only	Index for stateless Auto-Config addresses. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently disabled, this object will show nothing.
ADR ethernetInterfaceStatelessAutoConfigAddresses	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1.2	InetAddressIPv6	read-only	The stateless Auto-Configuration IPv6 address. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently disabled, this object will show nothing.
INT ethernetInterfaceStatelessAutoConfigAddressesPrefixLen	1.3.6.1.4.1.19046.11.1.3.4.1.4.5.3.3.2.1.3	INTEGER	read-only	The stateless Auto-Configration address prefix length. NOTE: If ethernetInterfaceIPv6StatelessAutoConfigEnabled or ethernetInterfaceIPv6Enabled is currently disabled, this object will show nothing.
vlansSM	1.3.6.1.4.1.19046.11.1.3.4.1.5
vlansSMvlan1config	1.3.6.1.4.1.19046.11.1.3.4.1.5.1
OCT vlansSMvlan1Name	1.3.6.1.4.1.19046.11.1.3.4.1.5.1.1	OCTET STRING	read-only	The name of VLAN1, 1-64 characters.
INT vlansSMvlan1vlanId	1.3.6.1.4.1.19046.11.1.3.4.1.5.1.2	INTEGER	read-only	The VLAN ID for VLAN1.
INT vlansSMvlan1State	1.3.6.1.4.1.19046.11.1.3.4.1.5.1.3	INTEGER	read-only	The state of VLAN1
INT vlansSMvlan1RemoteControl	1.3.6.1.4.1.19046.11.1.3.4.1.5.1.4	INTEGER	read-only	The state of the Remote Control feature for VLAN1. Note that Remote Control can only be enabled on one VLAN.
INT vlansSMvlan1SSerialOverLan	1.3.6.1.4.1.19046.11.1.3.4.1.5.1.5	INTEGER	read-only	The state of the Serail Over LAN feature for VLAN1. Note that Serial Over LAN can only be enabled on one VLAN.
vlansSMvlan2config	1.3.6.1.4.1.19046.11.1.3.4.1.5.2
OCT vlansSMvlan2Name	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.1	OCTET STRING	read-only	The name of VLAN1, 1-64 characters.
INT vlansSMvlan2vlanId	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.2	INTEGER	read-only	The VLAN ID for VLAN2.
INT vlansSMvlan2State	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.3	INTEGER	read-only	The state of VLAN2
INT vlansSMvlan2RemoteControl	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.4	INTEGER	read-only	The state of the Remote Control feature for VLAN2. Note that Remote Control can only be enabled on one VLAN.
INT vlansSMvlan2SerialOverLan	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.5	INTEGER	read-only	The state of the Serail Over LAN feature for VLAN2. Note that Serial Over LAN can only be enabled on one VLAN.
vlansSMvlan2ipv4Config	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6
IP vlansSMvlan2IPv4Address	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6.1	IpAddress	read-only	Contains the IPv4 address for the VLAN2 interface.
IP vlansSMvlan2IPv4Gateway	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6.2	IpAddress	read-only	Contains the Gateway IPv4 address for the VLAN2 interface.
IP vlansSMvlan2IPv4SubnetMask	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.6.3	IpAddress	read-only	Contains the Subnet Mask for the IPv4 address for the VLAN2 interface.
vlansSMvlan2ipv6Config	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7
ADR vlansSMvlan2IPv6Address	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7.1	InetAddressIPv6	read-only	Contains the IPv6 address for the VLAN2 interface.
ADR vlansSMvlan2IPv6Gateway	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7.2	InetAddressIPv6	read-only	Contains the Gateway IPv6 address for the VLAN2 interface.
INT vlansSMvlan2IPv6PrefixLength	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.7.3	INTEGER	read-only	Contains the Prefix Length for the IPv6 address for the VLAN2 interface.
vlansSMvlan2ipv4StatusRoutes	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8
IP vlansSMvlan2IPv4StaticRouteIP1	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.1	IpAddress	read-only	Contains the IPv4 address for the first IPv4 static route.
IP vlansSMvlan2IPv4StaticRouteSM1	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.2	IpAddress	read-only	Contains the Subnet Mask for the first IPv4 static route.
IP vlansSMvlan2IPv4StaticRouteIP2	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.3	IpAddress	read-only	Contains the IPv4 address for the second IPv4 static route.
IP vlansSMvlan2IPv4StaticRouteSM2	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.4	IpAddress	read-only	Contains the Subnet Mask for the second IPv4 static route.
IP vlansSMvlan2IPv4StaticRouteIP3	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.5	IpAddress	read-only	Contains the IPv4 address for the third IPv4 static route.
IP vlansSMvlan2IPv4StaticRouteSM3	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.8.6	IpAddress	read-only	Contains the Subnet Mask for the third IPv4 static route.
vlansSMvlan2ipv6StatusRoutes	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9
ADR vlansSMvlan2IPv6StaticRouteIP1	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.1	InetAddressIPv6	read-only	Contains the IPv6 address for the first IPv6 static route.
INT vlansSMvlan2IPv6StaticRoutePL1	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.2	INTEGER	read-only	Contains the Prefix Length for the first IPv6 static route.
ADR vlansSMvlan2IPv6StaticRouteIP2	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.3	InetAddressIPv6	read-only	Contains the IPv6 address for the second IPv6 static route.
INT vlansSMvlan2IPv6StaticRoutePL2	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.4	INTEGER	read-only	Contains the Prefix Length for the second IPv6 static route.
ADR vlansSMvlan2IPv6StaticRouteIP3	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.5	InetAddressIPv6	read-only	Contains the IPv6 address for the third IPv6 static route.
INT vlansSMvlan2IPv6StaticRoutePL3	1.3.6.1.4.1.19046.11.1.3.4.1.5.2.9.6	INTEGER	read-only	Contains the Prefix Length for the third IPv6 static route.
vlansSMvlanControl	1.3.6.1.4.1.19046.11.1.3.4.1.5.3
INT vlansSMvlanConfigRevertTimout	1.3.6.1.4.1.19046.11.1.3.4.1.5.3.1	INTEGER	read-only	Contains the VLAN Config Revert Timeout value.
INT ddnsStatus	1.3.6.1.4.1.19046.11.1.3.4.1.10	INTEGER	read-only	Dynamic DNS provides the capability for a networked device to notify a domain name server to change, in real time, the active DNS configuration of its configured hostnames, addresses or other information stored in DNS. With Dynamic DNS, host computers gain the capability to notify their respective DNS server of the IP address they have received from a DHCP server or through self-configuration.
OCT hostName	1.3.6.1.4.1.19046.11.1.3.4.1.11	OCTET STRING	read-only	Contains the DNS host name for this system. This object provides the exact same function as ethernetInterfaceHostName
INT ddnsDomainToUse	1.3.6.1.4.1.19046.11.1.3.4.1.12	INTEGER	read-only	The domain name to be used with Dynamic DNS.
OCT domainName	1.3.6.1.4.1.19046.11.1.3.4.1.13	OCTET STRING	read-only	The user assigned DNS domain name.
lanOverUSBInterface	1.3.6.1.4.1.19046.11.1.3.4.1.14
IP xccUSBIPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.14.1	IpAddress	read-only	Contains the IP address for the LAN over USB of XCC.
IP xccUSBSubnetMask	1.3.6.1.4.1.19046.11.1.3.4.1.14.2	IpAddress	read-only	Contains the Subnet Mask for the LAN over USB of XCC.
IP osUSBIPAddress	1.3.6.1.4.1.19046.11.1.3.4.1.14.3	IpAddress	read-only	Contains the IP address for the LAN over USB of OS.
tcpProtocols	1.3.6.1.4.1.19046.11.1.3.4.2
snmpAgentConfig	1.3.6.1.4.1.19046.11.1.3.4.2.1
OCT snmpSystemName	1.3.6.1.4.1.19046.11.1.3.4.2.1.1	OCTET STRING	read-only	A NULL terminated 48 byte string that contains the SNMP agent name.
OCT snmpSystemContact	1.3.6.1.4.1.19046.11.1.3.4.2.1.2	OCTET STRING	read-only	A NULL terminated 48 byte string that contains the SNMP agent contact name.
OCT snmpSystemLocation	1.3.6.1.4.1.19046.11.1.3.4.2.1.3	OCTET STRING	read-only	A NULL terminated 48 byte string that contains the SNMP agent location name.
INT snmpSystemAgentTrapsDisable	1.3.6.1.4.1.19046.11.1.3.4.2.1.4	INTEGER	read-only	Disable or enable SNMP V1 and V3 traps.
snmpAgentCommunityConfig	1.3.6.1.4.1.19046.11.1.3.4.2.1.5
STR snmpCommunityEntryCommunityName	1.3.6.1.4.1.19046.11.1.3.4.2.1.5.1	DisplayString	read-only	SNMP Community entry name.
OCT snmpCommunityEntryCommunityIpAddress	1.3.6.1.4.1.19046.11.1.3.4.2.1.5.2	OCTET STRING	read-only	SNMP Community IP address or host name.
INT snmpv3SystemAgentEnable	1.3.6.1.4.1.19046.11.1.3.4.2.1.7	INTEGER	read-only	Disable or enable the SNMPv3 agent.
snmpAgentUserProfileConfig	1.3.6.1.4.1.19046.11.1.3.4.2.1.8
snmpUserProfileTable	1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1		not-accessible	Table of SNMPv3 User Profile entries
snmpUserProfileEntry	1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1		not-accessible	SNMP User Profile entries
INT snmpUserProfileEntryIndex	1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.1	INTEGER	read-only	Index for SNMPv3 Agent User Profile entry.
INT snmpUserProfileEntryAuthProt	1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.2	INTEGER	read-only	SNMPv3 User Profile entry - Authentication Protocol supported by the user.
INT snmpUserProfileEntryPrivProt	1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.3	INTEGER	read-only	SNMPv3 User Profile entry - Privacy Protocol supported by the user.
INT snmpUserProfileEntryViewType	1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.5	INTEGER	read-only	SNMPv3 User Profile entry - Access level (Get) of the user.
OCT snmpUserProfileEntryIpAddress	1.3.6.1.4.1.19046.11.1.3.4.2.1.8.1.1.6	OCTET STRING	read-only	SNMPv3 User Profile entry - IP address or host name.
dnsConfig	1.3.6.1.4.1.19046.11.1.3.4.2.2
INT dnsEnabled	1.3.6.1.4.1.19046.11.1.3.4.2.2.1	INTEGER	read-only	Disable or enable the DNS agent.
IP dnsServerIPAddress1	1.3.6.1.4.1.19046.11.1.3.4.2.2.2	IpAddress	read-only	Contains the primary DNS server IP address.
IP dnsServerIPAddress2	1.3.6.1.4.1.19046.11.1.3.4.2.2.3	IpAddress	read-only	Contains the secondary DNS server IP address.
IP dnsServerIPAddress3	1.3.6.1.4.1.19046.11.1.3.4.2.2.4	IpAddress	read-only	Contains the tertiary DNS server IP address.
ADR dnsServerIPv6Address1	1.3.6.1.4.1.19046.11.1.3.4.2.2.12	InetAddressIPv6	read-only	Contains the primary IPv6 DNS server address.
ADR dnsServerIPv6Address2	1.3.6.1.4.1.19046.11.1.3.4.2.2.13	InetAddressIPv6	read-only	Contains the secondary IPv6 DNS server address.
ADR dnsServerIPv6Address3	1.3.6.1.4.1.19046.11.1.3.4.2.2.14	InetAddressIPv6	read-only	Contains the tertiary IPv6 DNS server address.
INT dnsPriority	1.3.6.1.4.1.19046.11.1.3.4.2.2.20	INTEGER	read-only	Tells the order host names are resolved. The options are to either first resolve with an IPv6 DNS server or to first resolve with an IPv6 DNS server.
INT dnsLXCADiscovery	1.3.6.1.4.1.19046.11.1.3.4.2.2.21	INTEGER	read-only	Disable or enable LXCA discovery using DNS SRV records.
smtpConfig	1.3.6.1.4.1.19046.11.1.3.4.2.3
OCT smtpServerNameOrIPAddress	1.3.6.1.4.1.19046.11.1.3.4.2.3.1	OCTET STRING	read-only	A NULL terminated 64 byte string that contains the SMTP server Host name or IP address(a.b.c.d).
INT smtpServerPort	1.3.6.1.4.1.19046.11.1.3.4.2.3.2	INTEGER	read-only	SMTP server port number.
INT smtpServerAuthentication	1.3.6.1.4.1.19046.11.1.3.4.2.3.3	INTEGER	read-only	Enable/disable SMTP-AUTH function.
OCT smtpServerAuthenticationUser	1.3.6.1.4.1.19046.11.1.3.4.2.3.4	OCTET STRING	read-only	SMTP authentication user name
INT smtpServerAuthenticationMethod	1.3.6.1.4.1.19046.11.1.3.4.2.3.6	INTEGER	read-only	SMTP authentication method , support CRAM-MD5 and PLAIN only
OCT smtpServerReversePath	1.3.6.1.4.1.19046.11.1.3.4.2.3.7	OCTET STRING	read-only	A NULL terminated 256 byte string that contains the SMTP Reverse Path. The user can substitute their own sender information in place of the XCC default sender information. For example xcc@mycompany.com in place of the default alertmgr@a.b.c.d.
tcpApplicationConfig	1.3.6.1.4.1.19046.11.1.3.4.2.4
INT slpAddrType	1.3.6.1.4.1.19046.11.1.3.4.2.4.2	INTEGER	read-only	Get SLP address type. Note that when slpAddrType is broadast then the multicast address in slpMulticastAddt will be ignored.
IP slpMulticastAddr	1.3.6.1.4.1.19046.11.1.3.4.2.4.3	IpAddress	read-only	Service Locator Protocol Multicast address
sshServerConfig	1.3.6.1.4.1.19046.11.1.3.4.2.4.5
INT sshServerHostKeySize	1.3.6.1.4.1.19046.11.1.3.4.2.4.5.1	INTEGER	read-only	The size of the public/private host key pair. NOTE: The XCC supports only the bits1048 value.
OCT sshServerHostKeyFingerprint	1.3.6.1.4.1.19046.11.1.3.4.2.4.5.2	OCTET STRING	read-only	The RSA fingerprint of the public part of the host key pair. This value can be used with the SSH client to verify, on the initial connection, that the Secure Shell server responding to the request is the server running on the XCC. Null Empty string if no RSA key exists.
INT sshEnable	1.3.6.1.4.1.19046.11.1.3.4.2.4.5.5	INTEGER	read-only	Disable/Enable SSH.
sslConfig	1.3.6.1.4.1.19046.11.1.3.4.2.4.6
INT sslEnableHTTPSforWeb	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.1	INTEGER	read-only	Get the status for web HTTPS service. To use SSL, a client web browser must be configured to use SSL3 and/or TLS. Older export-grade browsers with only SSL2 support cannot be used.
INT sslEnableHTTPSforCIMXML	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.2	INTEGER	read-only	Get the status for CIM over HTTPS service.
INT sslEnableSecureClientLDAP	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.3	INTEGER	read-only	Get the status of the Secure LDAP Client.
sslServerCertificate	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.4
INT sslServerCertificateStatus	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.4.1	INTEGER	read-only	Get the status of the installed HTTPS certificate. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Private Key and CA-signed cert installed. 4 = Private Key stored, CSR available for download. 5 = Private Key and Self-signed cert installed, Private Key stored, CSR available for download. 6 = Private Key and CA-signed cert installed, Private Key stored, CSR available for download.
OCT sslServerCertificateExpirationDate	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.4.2	OCTET STRING	read-only	Expiration date of the installed HTTPS certificate.
sslLDAPTrustedCertificate	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5
INT sslLDAPTrustedCertificate1Status	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.1	INTEGER	read-only	Get the status of the LDAP trusted certificate #1. 0 = certificate not installed 1 = certificate installed.
OCT sslLDAPTrustedCertificate1ExpirationDate	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.2	OCTET STRING	read-only	Expiration date of the LDAP trusted certificate #1 if it is installed.
INT sslLDAPTrustedCertificate2Status	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.3	INTEGER	read-only	Get the status of the LDAP trusted certificate #2. 0 = certificate not installed 1 = certificate installed.
OCT sslLDAPTrustedCertificate2ExpirationDate	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.4	OCTET STRING	read-only	Expiration date of the LDAP trusted certificate #2 if it is installed..
INT sslLDAPTrustedCertificate3Status	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.5	INTEGER	read-only	Get the status of the LDAP trusted certificate #3. 0 = certificate not installed 1 = certificate installed.
OCT sslLDAPTrustedCertificate3ExpirationDate	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.6	OCTET STRING	read-only	Expiration date of the LDAP trusted certificate #3 if it is installed.
INT sslLDAPTrustedCertificate4Status	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.7	INTEGER	read-only	Get the status of the LDAP trusted certificate #4. 0 = certificate not installed 1 = certificate installed.
OCT sslLDAPTrustedCertificate4ExpirationDate	1.3.6.1.4.1.19046.11.1.3.4.2.4.6.5.8	OCTET STRING	read-only	Expiration date of the LDAP trusted certificate #4 if it is installed.
certDomainNames	1.3.6.1.4.1.19046.11.1.3.4.2.4.8
certDomainNameTable	1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1		not-accessible	This table contains certificate domain names and status.
certDomainNameEntry	1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1		not-accessible	Each row contains a certificate domain name and status.
INT certDomainNameIndex	1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1.1	INTEGER	read-only	The index number of one certificate domain name entry.
OCT certDomainName	1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1.2	OCTET STRING	read-only	The Certificate Domain Name of one certificate domain name entry.
OCT certDomainNameStatus	1.3.6.1.4.1.19046.11.1.3.4.2.4.8.1.1.3	OCTET STRING	read-only	The status of the Certificate Domain Name entry.
skrServers	1.3.6.1.4.1.19046.11.1.3.4.2.4.9
skrServerTable	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1		not-accessible	This table contains Storage Key Repository Server hostnames and ports.
skrServerEntry	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1		not-accessible	Each row contains a Storage Key Repository Server hostname and port.
INT skrServerIndex	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1.1	INTEGER	read-only	The index number of one Storage Key Repository Server entry.
OCT skrServerHostname	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1.2	OCTET STRING	read-only	Storage Key Repository Server hostname or IP address.
INT skrServerPort	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.1.1.3	INTEGER	read-only	Storage Key Repository Server port number.
OCT skrDeviceGroup	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.3	OCTET STRING	read-only	An optional NULL terminated 16 character string that contains the Device Group that the server drives belong to.
skrClientConfigCertficate	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.4
INT skrClientCertificateStatus	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.4.3	INTEGER	read-only	Get the status of the installed Web certificates. 1 = Private Key and Cert/CSR not available. 2 = Private Key and Self-signed cert installed. 3 = Private Key and CA-signed cert installed. 4 = Private Key stored, CSR available for download. 5 = Private Key and Self-signed cert installed, Private Key stored, CSR available for download. 6 = Private Key and CA-signed cert installed, Private Key stored, CSR available for download.
OCT skrClientCertificateExpirationDate	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.4.4	OCTET STRING	read-only	Expiration date of the SKR client certificate.
OCT skrServerCertificateExpirationDate	1.3.6.1.4.1.19046.11.1.3.4.2.4.9.12	OCTET STRING	read-only	Expiration date of the SKR Server certificate.
tcpPortAssignmentCfg	1.3.6.1.4.1.19046.11.1.3.4.2.5
INT httpPortAssignment	1.3.6.1.4.1.19046.11.1.3.4.2.5.2	INTEGER	read-only	HTTP port number. Default value is 80. Once changed, the url's have to include :port at the end.
INT httpsPortAssignment	1.3.6.1.4.1.19046.11.1.3.4.2.5.3	INTEGER	read-only	SSL port number. Default value is 443. Once changed, the url's have to include :port at the end.
INT sshLegacyCLIPortAssignment	1.3.6.1.4.1.19046.11.1.3.4.2.5.6	INTEGER	read-only	SSH port number. Default value is 22.
INT snmpAgentPortAssignment	1.3.6.1.4.1.19046.11.1.3.4.2.5.8	INTEGER	read-only	SNMP Agent port number. Default value is 161.
INT snmpTrapsPortAssignment	1.3.6.1.4.1.19046.11.1.3.4.2.5.9	INTEGER	read-only	SNMP Traps port number. Default value is 162.
INT remvidPortAssignment	1.3.6.1.4.1.19046.11.1.3.4.2.5.10	INTEGER	read-only	Remote Console port number. Default value is 3900.
INT cimOverHttpsPortAssignment	1.3.6.1.4.1.19046.11.1.3.4.2.5.12	INTEGER	read-only	CIM over Https port number.
ldapClientCfg	1.3.6.1.4.1.19046.11.1.3.4.2.6
OCT ldapServer1NameOrIPAddress	1.3.6.1.4.1.19046.11.1.3.4.2.6.1	OCTET STRING	read-only	A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d).
INT ldapServer1PortNumber	1.3.6.1.4.1.19046.11.1.3.4.2.6.2	INTEGER	read-only	LDAP server port number.
OCT ldapServer2NameOrIPAddress	1.3.6.1.4.1.19046.11.1.3.4.2.6.3	OCTET STRING	read-only	A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d).
INT ldapServer2PortNumber	1.3.6.1.4.1.19046.11.1.3.4.2.6.4	INTEGER	read-only	LDAP server port number.
OCT ldapServer3NameOrIPAddress	1.3.6.1.4.1.19046.11.1.3.4.2.6.5	OCTET STRING	read-only	A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d).
INT ldapServer3PortNumber	1.3.6.1.4.1.19046.11.1.3.4.2.6.6	INTEGER	read-only	LDAP server port number.
OCT ldapServer4NameOrIPAddress	1.3.6.1.4.1.19046.11.1.3.4.2.6.7	OCTET STRING	read-only	A NULL terminated 64 byte string that contains the LDAP server host name or IP address (a.b.c.d).
INT ldapServer4PortNumber	1.3.6.1.4.1.19046.11.1.3.4.2.6.8	INTEGER	read-only	LDAP server port number.
OCT ldapRootDN	1.3.6.1.4.1.19046.11.1.3.4.2.6.9	OCTET STRING	read-only	Distinguished Name for root entry of directory tree. An example might look like dn=foobar,dn=com.
OCT ldapGroupFilter	1.3.6.1.4.1.19046.11.1.3.4.2.6.11	OCTET STRING	read-only	This filter is used for group authentication. It specifies what group or groups that this MM belongs to. If left blank, group authentication is disabled. Otherwise, group authentication will be performed against the filter. The filter can be a specific group name (eg. IMMWest), a wildcard () which matches everything, or a wildcard with a prefix (eg. XCC). The default filter is XCC*. After user authentication, group authentication will take place, whereby an attempt will be made to match the group or groups (that the user belongs to) to the group filter defined here. If there is no match, the user will not pass authentication and will be blocked. If there is a match, the login permissions for the user will be retrieved from the matched group(s), unless the user already has login permissions assigned directly from the user record retrieved from the LDAP server.
INT ldapBindingMethod	1.3.6.1.4.1.19046.11.1.3.4.2.6.12	INTEGER	read-only	On initial binds to the LDAP server during user authentication, there are three options: Anonymous authentication: Bind attempt is made without a client DN or password. If the bind is successful, a search will be requested in order to find an entry on the LDAP server for the user attempting to login. If an entry is found, a second attempt to bind will be attempted, this time with the user's DN and password. If this succeeds, the user is deemed to have passed the user authentication phase. Group authentication is then attempted if it is enabled. Client authentication: Bind attempt is made with client DN and password specified by this configuration parameter. If the bind is successful, we proceed as above. User Principal Name (UPN): Bind attempt is made directly with the credentials used during the login process. If this succeeds, the user is deemed to have passed the user authentication phase. Note that for Active Directory servers, the userid can have the form someuser@somedomain or simply someuser.
OCT ldapClientAuthenticationDN	1.3.6.1.4.1.19046.11.1.3.4.2.6.13	OCTET STRING	read-only	The initial bind to the LDAP server during user authentication can be performed with anonymous authentication, client based authentication, or UPN. The client based option requires a client DN and password as parameters to the bind request. These parameters are configured here. Note that the password can be left blank.
INT ldapRoleBasedSecurityEnabled	1.3.6.1.4.1.19046.11.1.3.4.2.6.15	INTEGER	read-only	A value of true for RoleBasedSecurityEnabled indicates enhanced will be used by the service processor. A value of false for RoleBasedSecurityEnabled indicates the legacy bit mask based security is being used.
OCT ldapServerTargetName	1.3.6.1.4.1.19046.11.1.3.4.2.6.16	OCTET STRING	read-only	When administrator chooses Enhanced Role Based Security authentication model, he can associate one XCC with one managed target object in Snap-in (one tool to configure LDAP users permission) via one target name. The XCC target name can be looked as alias of XCC, administrator can change it according to his configuration requirements. This is a string of up to 63 characters (plus the null character)
OCT ldapUIDsearchAttribute	1.3.6.1.4.1.19046.11.1.3.4.2.6.17	OCTET STRING	read-only	When the binding method selected is Anonymous authentication or Client authentication, the initial bind to the LDAP server is followed by a search request aimed at retrieving specific information about the user, including the user's DN, login permissions, and group ownerships. In order to retrieve this information, the search request must specify the attribute name used to represent userids on that server. Specifically, this name is used as a search filter against the login id entered by the user. This attribute name is configured here. If this field is left blank, a default of uid is used during user authentication. For example, on Active Directory servers, the attribute name used for userids is often sAMAccoutName. When the binding method selected is UPN or Strict UPN, this field defaults automatically to userPrincipalName during user authentication if the userid entered has the form userid@somedomain.
OCT ldapGroupSearchAttribute	1.3.6.1.4.1.19046.11.1.3.4.2.6.18	OCTET STRING	read-only	When the MM Group Filter name is configured, it is necessary to retrieve from the LDAP server the list of groups that a particular user belongs to. This is required to do group authentication. In order to retrieve this list, the search filter sent to the server must specify the attribute name associated with groups. This field specifies this attribute name. If this field is left blank, the attribute name in the filter will default to memberOf.
OCT ldapLoginPermissionAttribute	1.3.6.1.4.1.19046.11.1.3.4.2.6.19	OCTET STRING	read-only	When a user successfully authenticates via a LDAP server, it is necessary to retrieve the login permissions for this user. In order to retrieve these permissions, the search filter sent to the server must specify the attribute name associated with login permissions. This field specifies this attribute name.
INT ldapUseDNSOrPreConfiguredServers	1.3.6.1.4.1.19046.11.1.3.4.2.6.20	INTEGER	read-only	The MM contains a Version 2.0 LDAP Client that may be configured to provide user authentication through one or more LDAP servers. The LDAP server(s) to be used for authentication can be discovered dynamically or manually pre-configured. If the usePreConfiguredLDAPServers option is selected, up to 3 LDAP servers can be configured. Simply enter the server's IP address or hostname (assuming DNS is enabled). The port number for each server is optional. If left blank, the default value of 389 is used for non-secured LDAP connections. For secured connections, the default is 636. At least one server must be configured. If the useDNSToFindLDAPServers is selected, the mechanisms described by RFC2782 (A DNS RR for specifying the location of services) are applied to find the server(s). This is known as DNS SRV.
INT ldapDomainSource	1.3.6.1.4.1.19046.11.1.3.4.2.6.21	INTEGER	read-only	The DNS SRV request sent to the DNS server must specify a domain name. The LDAP client will determine where to get this domain name based on one of the following three options: - extractSearchDomainFromLoginID: With this option, the LDAP client will use the domain name in the login id. For example, if the login id is joesmith@mycompany.com, the domain name equals mycompany.com. If the domain name cannot be extracted, the DNS SRV will fail, causing the user authentication to fail automatically. - useOnlyConfiguredSearchDomainBelow: With this option, the LDAP client will use the domain name configured in the Search Domain parameter. - tryLoginFirstThenConfiguredValue: With this option, the LDAP client will first attempt to extract the domain name from the login id. If this succeeds, this domain name will be used in the DNS SRV request. If there is no domain name present in the login id, the LDAP client will instead use the configured Search Domain parameter as the domain name in the DNS SRV request. If nothing is configured, user authentication will fail immediately.
OCT ldapForestName	1.3.6.1.4.1.19046.11.1.3.4.2.6.22	OCTET STRING	read-only	In order to discover Global Catalogs (GC), the forest name must be configured in the ForestName property. The Global Catalogs are required for users who belong to universal groups in cross-domains. In environments where cross-domain group membership does not apply, this field can be left blank.
INT ldapAuthCfg	1.3.6.1.4.1.19046.11.1.3.4.2.6.23	INTEGER	read-only	If ldapAuthCfg is set to 0, LDAP server is used to authenticate and authorize users. If it is set to 1, LDAP server is only used to authenticate users. Note:LDAP Authentication Only mode is currently supported only in an Active Directory environment.
OCT ldapSearchDomain	1.3.6.1.4.1.19046.11.1.3.4.2.6.24	OCTET STRING	read-only	This parameter may be used as the domain name in the DNS SRV request, depending on how the Domain Source parameter is configured.
OCT ldapServiceName	1.3.6.1.4.1.19046.11.1.3.4.2.6.25	OCTET STRING	read-only	The DNS SRV request sent to the DNS server must also specify a service name. The configured value will be used for this purpose. If left blank, the default value used is 'ldap'. Note that the DNS SRV request must also specify a protocol name. This defaults to 'tcp' and is not configurable.
ntpConfig	1.3.6.1.4.1.19046.11.1.3.4.2.8
INT ntpEnable	1.3.6.1.4.1.19046.11.1.3.4.2.8.1	INTEGER	read-only	Disable/Enable the NTP client. The client will update the XCC system clock at the frequency specified.
OCT ntpIpAddressHostname1	1.3.6.1.4.1.19046.11.1.3.4.2.8.2	OCTET STRING	read-only	First NTP server's IP address or hostname if DNS is enabled and configured.
INT ntpUpdateFrequency	1.3.6.1.4.1.19046.11.1.3.4.2.8.3	INTEGER	read-only	The frequency in minutes that the NTP service runs. The value range is 3 to 1440.
OCT ntpIpAddressHostname2	1.3.6.1.4.1.19046.11.1.3.4.2.8.4	OCTET STRING	read-only	Second NTP server's IP address or hostname if DNS is enabled and configured.
OCT ntpIpAddressHostname3	1.3.6.1.4.1.19046.11.1.3.4.2.8.6	OCTET STRING	read-only	Third NTP server's IP address or hostname if DNS is enabled and configured.
OCT ntpIpAddressHostname4	1.3.6.1.4.1.19046.11.1.3.4.2.8.7	OCTET STRING	read-only	Fourth NTP server's IP address or hostname if DNS is enabled and configured.
ipmiConfig	1.3.6.1.4.1.19046.11.1.3.4.2.10
INT ipmiStatus	1.3.6.1.4.1.19046.11.1.3.4.2.10.1	INTEGER	read-only	Get the status of IPMI service
cimxmlConfig	1.3.6.1.4.1.19046.11.1.3.4.2.11
INT cimxmlStatus	1.3.6.1.4.1.19046.11.1.3.4.2.11.1	INTEGER	read-only	Get the status of CIM service.
restConfig	1.3.6.1.4.1.19046.11.1.3.4.2.12
INT restStatus	1.3.6.1.4.1.19046.11.1.3.4.2.12.1	INTEGER	read-only	Get the status of the REST over HTTPS.
INT xccVersionCheck	1.3.6.1.4.1.19046.11.1.3.7	INTEGER	read-only	Get the XCC version type.
generalSystemSettings	1.3.6.1.4.1.19046.11.1.4
serverTimers	1.3.6.1.4.1.19046.11.1.4.1
INT oSHang	1.3.6.1.4.1.19046.11.1.4.1.1	INTEGER	read-only	Number, in 1 second intervals, the XCC will check to insure the OS is operating properly. If the operating system fails to respond within 6 seconds to one of these checks, the remote supervisor adapter will generate an O/S Timeout alert(if enabled) and automatically restart the system one time. Once the system is restarted, the O/S Watchdog is automatically disabled until the operating system is shutdown and the server is power cycled.
INT oSLoader	1.3.6.1.4.1.19046.11.1.4.1.2	INTEGER	read-only	Number in 30 second intervals the remote XCC will wait between completion of POST and the end of loading the OS. If this interval is exceeded, the XCC will generate a Loader Timeout alert(if enabled) and automatically restart the system one time. Once the system is restarted, the Loader Timeout is automatically disabled until the operating system is shutdown and the server is power cycled.
INT networkPXEboot	1.3.6.1.4.1.19046.11.1.4.2	INTEGER	read-only	Modify the system's boot sequence for the next system restart in order to attempt a PXE/DHCP network boot. The system's boot sequence(set via the BIOS settings) will be altered only if the system is not under PAP (Privileged Access Protection).
systemPower	1.3.6.1.4.1.19046.11.1.5
powerStatistics	1.3.6.1.4.1.19046.11.1.5.1
INT currentSysPowerStatus	1.3.6.1.4.1.19046.11.1.5.1.1	INTEGER	read-only	Indicates if the system is currently powered on, off, or in sleep state.
INT powerOnHours	1.3.6.1.4.1.19046.11.1.5.1.2	INTEGER	read-only	Number of hours the system has been powered on.
INT restartCount	1.3.6.1.4.1.19046.11.1.5.1.3	INTEGER	read-only	Number of times the system has been restarted.
INT systemState	1.3.6.1.4.1.19046.11.1.5.1.4	INTEGER	read-only	Shows the current operational state of the system.
powerSysConfig	1.3.6.1.4.1.19046.11.1.5.2
INT powerSysOffDelay	1.3.6.1.4.1.19046.11.1.5.2.1	INTEGER	read-only	The number of 1 second interval the XCC will wait before powering off the system.
OCT powerSysOnClockSetting	1.3.6.1.4.1.19046.11.1.5.2.2	OCTET STRING	read-only	The clock setting used to determine when the XCC will power on the system. For example the value '03/04/2001,06:00' means that the system will power on March 4, 2001 at 06:00AM.
powerCyclingSchedule	1.3.6.1.4.1.19046.11.1.5.5
OCT schedulePowerOffWithOsShutdown	1.3.6.1.4.1.19046.11.1.5.5.1	OCTET STRING	read-only	Power Off the system after performing a OS shutdown at specified time and day of the week. Example: Monday,09:00, To reset, the value as Never,00:00.
OCT schedulePowerOnSystem	1.3.6.1.4.1.19046.11.1.5.5.2	OCTET STRING	read-only	Power On the system at specified time and day of the week. Example: Monday,09:00. To reset, the value as Never,00:00.
serviceAdvisor	1.3.6.1.4.1.19046.11.1.8
autoCallHomeSetup	1.3.6.1.4.1.19046.11.1.8.1
INT acceptLicenseAgreement	1.3.6.1.4.1.19046.11.1.8.1.1	INTEGER	read-only	Accept Terms and Conditions of Service Advisor. The user will have to accept the terms and conditions before Service Advisor can send diagnostic data to support personnel. If XCC configuration is reset to defaults, the user will have to accept the terms and conditions again before they can enable Service Advisor. For more information, please refer to the BladeCenter User's Guide. It will return disabled(0) or enabled(1), depending upon the current state.
INT serviceAdvisorEnable	1.3.6.1.4.1.19046.11.1.8.1.2	INTEGER	read-only	Disable/Enable Call Home Support. The User Agreement must be accepted and the contact information must be set before the Call Home Support function of Service Advisor can be enabled.
serviceSupportCenter	1.3.6.1.4.1.19046.11.1.8.2
OCT lenovoSupportCenter	1.3.6.1.4.1.19046.11.1.8.2.1	OCTET STRING	read-only	The country code for the Support Center. 2 character ISO country code.
contactInformation	1.3.6.1.4.1.19046.11.1.8.3
OCT companyName	1.3.6.1.4.1.19046.11.1.8.3.1	OCTET STRING	read-only	The organization/company name of the contact person. 1-30 characters.
OCT contactName	1.3.6.1.4.1.19046.11.1.8.3.2	OCTET STRING	read-only	The name of the contact person.1-30 characters.
OCT phoneNumber	1.3.6.1.4.1.19046.11.1.8.3.3	OCTET STRING	read-only	The phone of the contact person. 5-30 characters.
OCT emailAddress	1.3.6.1.4.1.19046.11.1.8.3.4	OCTET STRING	read-only	The email of the contact person. It must contain '@' and dot '.' in form userid@hostname (30 characters maximum). The userid can be alphanumeric characters, '.', '-', or '_' but must begin and end with alphanumeric characters. The hostname can be alphanumeric characters, '.', '-', or '_'. It must contain at least two domain items. Every domain item should begin and end with alphanumeric character, and the last domain item should be 2-20 alphabetic characters.
OCT address	1.3.6.1.4.1.19046.11.1.8.3.5	OCTET STRING	read-only	The address of the machine location. The information in this field should be of sufficient detail to allow someone to quickly find the chassis when necessary. 1-30 characters.
OCT city	1.3.6.1.4.1.19046.11.1.8.3.6	OCTET STRING	read-only	The city of the machine location. 1-30 characters.
OCT state	1.3.6.1.4.1.19046.11.1.8.3.7	OCTET STRING	read-only	The state of the machine location. 2-3 characters.
OCT postalCode	1.3.6.1.4.1.19046.11.1.8.3.8	OCTET STRING	read-only	The postal code of the location for this system. 1-9 characters, only alphanumeric characters are valid.
OCT phoneExtension	1.3.6.1.4.1.19046.11.1.8.3.9	OCTET STRING	read-only	The phone extension of the contact person. 30 characters maximum.
OCT altContactName	1.3.6.1.4.1.19046.11.1.8.3.10	OCTET STRING	read-only	The name of the alternate contact person. 1-30 characters.
OCT altPhoneNumber	1.3.6.1.4.1.19046.11.1.8.3.11	OCTET STRING	read-only	The phone of the alternate contact person. 5-30 characters.
OCT altPhoneExtension	1.3.6.1.4.1.19046.11.1.8.3.12	OCTET STRING	read-only	The phone extension of the alternate contact person. 30 characters maximum.
OCT altEmailAddress	1.3.6.1.4.1.19046.11.1.8.3.13	OCTET STRING	read-only	The email of the alternate contact person. It must contain '@' and dot '.' in form userid@hostname (30 characters maximum). The userid can be alphanumeric characters, '.', '-', or '_' but must begin and end with alphanumeric characters. The hostname can be alphanumeric characters, '.', '-', or '_'. It must contain at least two domain items. Every domain item should begin and end with alphanumeric character, and the last domain item should be 2-20 alphabetic characters.
OCT machineLocationPhoneNumber	1.3.6.1.4.1.19046.11.1.8.3.14	OCTET STRING	read-only	The phone of the physical location where the compuer system resides. 5-30 characters.
httpProxyConfig	1.3.6.1.4.1.19046.11.1.8.4
INT httpProxyEnable	1.3.6.1.4.1.19046.11.1.8.4.1	INTEGER	read-only	Disable/Enable of the HTTP Proxy. HTTP Proxy is used by the XCC when it is not connected to the internet directly.
OCT httpProxyLocation	1.3.6.1.4.1.19046.11.1.8.4.2	OCTET STRING	read-only	Fully qualified host name or IP address of the HTTP Proxy. Maximum of 63 characters.
INT httpProxyPort	1.3.6.1.4.1.19046.11.1.8.4.3	INTEGER	read-only	The port number of the HTTP Proxy. An integer value from 1 to 65535.
OCT httpProxyUserName	1.3.6.1.4.1.19046.11.1.8.4.4	OCTET STRING	read-only	User Name of the HTTP Proxy. A maximum of 30 characters string without spaces.
OCT httpProxyPassword	1.3.6.1.4.1.19046.11.1.8.4.5	OCTET STRING	read-only	Password of the HTTP Proxy. A maximum of 15 characters string without spaces.
activityLogs	1.3.6.1.4.1.19046.11.1.8.5
activityLogTable	1.3.6.1.4.1.19046.11.1.8.5.1		not-accessible	Table of Service Advisor Activity Log entries information. This table displays events that were generated by the system or user that are called home. The entries are displayed in reverse chronological order (most recent call home entry first). For any events that happen with same Date/Time, only one event will be called home. If a call home event that is already in the activity log is triggered again on the same event source, it will not be called home again unless the prior entry has been acknowledged as corrected or, in the case of XCC, 120 hours (5 days) have passed since it initially occurred and was called home.
activityLogEntry	1.3.6.1.4.1.19046.11.1.8.5.1.1		not-accessible	Activity Log table entry. Each entry has the result of the call-home attempt, the service number assigned for the issue by the Support Center, the event ID, event source, date and time that event occured, and a text message.
INT activityLogIndex	1.3.6.1.4.1.19046.11.1.8.5.1.1.1	INTEGER	read-only	The Activity Log index number. For consistent results, view as a table and not as individual entries.
OCT activityLogString	1.3.6.1.4.1.19046.11.1.8.5.1.1.2	OCTET STRING	read-only	A string of data detailing one Activity Log entry. The text message is from the original entry in the event log. For consistent results, view as a table and not as individual entries.
INT activityLogAcknowledge	1.3.6.1.4.1.19046.11.1.8.5.1.1.3	INTEGER	read-only	The acknowledgement of one Activity Log entry as corrected. This field allows the users to set a reminder next to certain events to indicate their awareness of the issue. Checking the acknowledge flag will not cause the event to be removed from the log or close the ticket at the Support Center. This log is not cleared, so the acknowledge flag can be used to indicate a problem can be ignored. This field can be also used to override the 120 hour (5 day) filtering of reports via the Support Center or FTP/TFTP Server of Service Data. For consistent results, view as a table and not as individual entries.
OCT activityLogAttribute	1.3.6.1.4.1.19046.11.1.8.5.1.1.4	OCTET STRING	read-only	A string of data detailing one Activity Log entry's attribute. It contains states of both calling the Support Center and FTP/TFTP Server. A PENDING indicates that the system is preparing for the event to be called home by collecting data about the systems state. A SUCCESS state indicates that the problem was successfully transmitted to the Support Center or FTP/TFTP Server. A DISABLED state indicates that Service Advisor has disabled calling the Support Center or FTP/TFTP Server while the hardware event is detected. A NOT SENT state indicates that the serviceable event was not sent to prevent the same event from being sent repeatedly. The FAILED state indicates that the attempt to transmit the event information was not successful. Additional information may be found in the Event Log. The service number is similar to a ticket number that can be used as a reference to the issue reported by the machine when contacting the Support Center. The event ID, event source, date and time are all information from the original entry in the event log. The acknowledged as corrected field is a reminder to certain events to indicate their awareness of the issue. For consistent results, view as a table and not as individual entries.
autoFTPSetup	1.3.6.1.4.1.19046.11.1.8.6
INT autoFTPCallMode	1.3.6.1.4.1.19046.11.1.8.6.1	INTEGER	read-only	This field specifies the automated problem reporting mode. Automated problem reporting mode allows the XCC to automatically put service data to a specified server when a call home event is detected. For any call home events that happen with same Date/Time, only one event will be reported. The system will also wait for an interval of 120 hours (5 days) before another identical event can be sent for the same failed component.
OCT autoFTPCallAddr	1.3.6.1.4.1.19046.11.1.8.6.2	OCTET STRING	read-only	This field specifies the remote server address of FTP and TFTP. It should be fully qualified hostname or IP address.
INT autoFTPCallPort	1.3.6.1.4.1.19046.11.1.8.6.3	INTEGER	read-only	This field specifies the port on remote FTP/TFTP server for data transmission.
OCT autoFTPCallUserID	1.3.6.1.4.1.19046.11.1.8.6.4	OCTET STRING	read-only	This field specifies the user account to login remote FTP server.
callHomeExclusionEvents	1.3.6.1.4.1.19046.11.1.8.7
readCallHomeExclusionEventTable	1.3.6.1.4.1.19046.11.1.8.7.1		not-accessible	Table of Call Home Exclusion Event entries information.
readCallHomeExclusionEventEntry	1.3.6.1.4.1.19046.11.1.8.7.1.1		not-accessible	Call Home Exclusion Event table entry
INT readCallHomeExclusionEventIndex	1.3.6.1.4.1.19046.11.1.8.7.1.1.1	INTEGER	read-only	The index number of one Call Home Exclusion Event. For consistent results, view as a table and not as individual entries.
OCT readCallHomeExclusionEventID	1.3.6.1.4.1.19046.11.1.8.7.1.1.2	OCTET STRING	read-only	The Event ID of one Call Home Exclusion Event entry. For consistent results, view as a table and not as individual entries.
supportProcessor	1.3.6.1.4.1.19046.11.1.158

RFC description

Exposes system instrumentation data from Lenovo XClarity Controller for server hardware monitoring.

Start monitoring Lenovo servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LENOVO-XCC-MIB

What Is LENOVO-XCC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description