All MIBs › LB3GH-1-0-7
Category: Network Management
Description: Manages configuration and status of the LB3GH load balancer hardware appliance.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is LB3GH-1-0-7?
LB3GH-1-0-7 is a legacy 3Com enterprise MIB (RFC1155-SMI/RFC-1212 macro style, under the a3Com enterprise OID) for the LinkBuilder 3GH modular hub chassis. Despite the batch's hint describing it as a load-balancer, the module's actual object tree — chassis, slot, smm, fbcm/fcm card groups, FDDI concentrator MAC/port groups, Ethernet port groups, and a bridging group — shows it manages a multi-slot Ethernet/FDDI hub with integral transparent bridging, not load-balancing. It exposes chassis/slot board inventory and status (slotBoardType, slotBoardStatus), FDDI MAC and Ethernet port statistics, a redundant power-supply group (lbPowerSupply), and a bridging group (lbBridgeTable/lbBridgePortTable) tracking per-bridge-port forwarded-frame counts, discards, and address-table thresholds, alongside numerous legacy TRAP-TYPE notifications for board, power-supply, and bridge-address-threshold events. It's useful for tracking the health of the hub's slot cards, power supplies, and bridging address table on an aging 3Com LinkBuilder 3GH chassis, and administrators can download the LB3GH-1-0-7 file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in LB3GH-1-0-7. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- 3Com LinkBuilder 3GH modular hub/FDDI concentrator chassis
Monitoring Examples
An operator polls slotBoardStatus for each slotIndex in slotTable to confirm all installed cards report normal, and watches lbBridgePortTotalDiscards alongside lbBridgeAddressThreshold in lbBridgeTable/lbBridgePortTable; discards climbing as the address table nears its threshold would indicate the bridge's MAC table is full and dropping frames.
What Can Be Monitored
- chassis/slot board type & status
- power supply status
- FDDI MAC & port statistics
- Ethernet port statistics
- bridge port forwarded-frame & discard counters
- bridge address-table threshold events
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| NetworkAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| a3Com | 1.3.6.1.4.1.43 | |||
| lb3gh | 1.3.6.1.4.1.43.7 | |||
| lb3ghMib | 1.3.6.1.4.1.43.7.1 | |||
| NTF lbSlotInsertEvent | 1.3.6.1.4.1.43.7.1.0.1 | The SNMP trap that is generated when a board is inserted into a particular slot in the chassis. | ||
| NTF lbSlotExtractEvent | 1.3.6.1.4.1.43.7.1.0.2 | The SNMP trap that is generated when a board is extracted from a particular slot in the chassis. | ||
| NTF lbBridgeAddressThresholdEvent | 1.3.6.1.4.1.43.7.1.0.3 | The SNMP trap that is generated when the number of addresses stored in the bridge reaches lbBridgeAddressThreshold. | ||
| NTF lbSystemOverTemperatureEvent | 1.3.6.1.4.1.43.7.1.0.6 | The SNMP trap that is generated when the system temperature exceeds a certain threshold. | ||
| NTF lbSlotOverTemperatureEvent | 1.3.6.1.4.1.43.7.1.0.7 | The SNMP trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold. | ||
| NTF lbPowerSupplyFailureEvent | 1.3.6.1.4.1.43.7.1.0.8 | The SNMP trap that is generated when a power supply unit fails in the system. | ||
| chassis | 1.3.6.1.4.1.43.7.1.1 | |||
| INT chassisId | 1.3.6.1.4.1.43.7.1.1.1 | INTEGER | read-only | The unique identifier assigned to this station during manufacturing. |
| INT chassisType | 1.3.6.1.4.1.43.7.1.1.2 | INTEGER | read-only | The type of the LinkBuilder 3GH chassis. |
| OCT chassisRevision | 1.3.6.1.4.1.43.7.1.1.3 | OCTET STRING | read-only | The revision number of this chassis. |
| STR chassisName | 1.3.6.1.4.1.43.7.1.1.4 | DisplayString | read-only | The text string describing this chassis. |
| STR chassisNameAbbrev | 1.3.6.1.4.1.43.7.1.1.5 | DisplayString | read-only | The text string describing the generic name for this chassis. |
| STR chassisManufacturer | 1.3.6.1.4.1.43.7.1.1.6 | DisplayString | read-only | The text string describing the manufacturer of this chassis. |
| INT chassisSlotCount | 1.3.6.1.4.1.43.7.1.1.7 | INTEGER | read-only | The number of slots in this chassis. |
| STR chassisBuildTime | 1.3.6.1.4.1.43.7.1.1.8 | DisplayString | read-only | The build time of the LinkBuilder 3GH system software. |
| OCT chassisSoftwareRevision | 1.3.6.1.4.1.43.7.1.1.9 | OCTET STRING | read-only | The revision number of the LinkBuilder 3GH system software. |
| INT chassisControlPanelColumns | 1.3.6.1.4.1.43.7.1.1.10 | INTEGER | read-only | The number of columns in the control panel display. |
| INT chassisControlPanelLines | 1.3.6.1.4.1.43.7.1.1.11 | INTEGER | read-only | The number of lines in the control panel display. |
| STR chassisControlPanelText | 1.3.6.1.4.1.43.7.1.1.12 | DisplayString | read-only | The text currently displayed in the control panel display. |
| INT chassisAction | 1.3.6.1.4.1.43.7.1.1.13 | INTEGER | read-write | This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: reset: resets the LinkBuilder 3GH system. |
| slot | 1.3.6.1.4.1.43.7.1.2 | |||
| slotTable | 1.3.6.1.4.1.43.7.1.2.1 | not-accessible | A list of slot entries. A single instance of this object exists for each slot in the LinkBuilder 3GH chassis. | |
| slotEntry | 1.3.6.1.4.1.43.7.1.2.1.1 | not-accessible | A slot entry contains information common to a specified slot within a LinkBuilder 3GH system. | |
| INT slotIndex | 1.3.6.1.4.1.43.7.1.2.1.1.1 | INTEGER | read-only | The physical slot number of this slot within the LinkBuilder 3GH chassis. |
| INT slotBoardType | 1.3.6.1.4.1.43.7.1.2.1.1.2 | INTEGER | read-only | The type of board residing in this slot. |
| OCT slotBoardRevision | 1.3.6.1.4.1.43.7.1.2.1.1.3 | OCTET STRING | read-only | The revision number of the board in this slot. |
| INT slotBoardStatus | 1.3.6.1.4.1.43.7.1.2.1.1.4 | INTEGER | read-only | The status of the board in this slot. |
| STR slotBoardName | 1.3.6.1.4.1.43.7.1.2.1.1.5 | DisplayString | read-only | The text string describing this board type. |
| STR slotBoardNameAbbrev | 1.3.6.1.4.1.43.7.1.2.1.1.6 | DisplayString | read-only | The abbreviation describing this board type. |
| INT slotBoardAction | 1.3.6.1.4.1.43.7.1.2.1.1.7 | INTEGER | read-write | This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: runDiagnostics: runs the board's offline diagnostics. |
| smm | 1.3.6.1.4.1.43.7.1.3 | |||
| smmTable | 1.3.6.1.4.1.43.7.1.3.1 | not-accessible | A list of System Management Module (SMM) entries. An entry exists for each Slot Table Entry whose board type is SMM. This table is indexed by the physical slot number of this SMM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table. | |
| smmEntry | 1.3.6.1.4.1.43.7.1.3.1.1 | not-accessible | An SMM entry contains information common to a single System Management Module (SMM) within a LinkBuilder 3GH system. | |
| INT smmSlotIndex | 1.3.6.1.4.1.43.7.1.3.1.1.1 | INTEGER | read-only | The physical slot number of this slot within the LinkBuilder 3GH chassis. |
| INT smmEthernetPortCount | 1.3.6.1.4.1.43.7.1.3.1.1.2 | INTEGER | read-only | The number of Ethernet ports on this board. |
| INT smmBaseEthernetPortIndex | 1.3.6.1.4.1.43.7.1.3.1.1.3 | INTEGER | read-only | The system-wide index for the first Ethernet port on this board. |
| fbcm | 1.3.6.1.4.1.43.7.1.4 | |||
| fbcmTable | 1.3.6.1.4.1.43.7.1.4.1 | not-accessible | A list of FDDI Backbone Connectivity Module (FBCM) entries. An entry exists for each Slot Table Entry whose board type is FBCM. This table is indexed by the physical slot number of this FBCM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table. | |
| fbcmEntry | 1.3.6.1.4.1.43.7.1.4.1.1 | not-accessible | An FBCM entry contains information common to a single FDDI Backbone Connectivity Module (FBCM) within a LinkBuilder 3GH system. | |
| INT fbcmSlotIndex | 1.3.6.1.4.1.43.7.1.4.1.1.1 | INTEGER | read-only | The physical slot number of this slot within the LinkBuilder 3GH chassis. |
| INT fbcmMACCount | 1.3.6.1.4.1.43.7.1.4.1.1.2 | INTEGER | read-only | The number of FDDI MACs present on this board. |
| INT fbcmBaseMACIndex | 1.3.6.1.4.1.43.7.1.4.1.1.3 | INTEGER | read-only | The system-wide index of the first FDDI MAC on this board. Additional MACs on this board will have consecutively increasing MAC indices following this index. |
| INT fbcmPortCount | 1.3.6.1.4.1.43.7.1.4.1.1.4 | INTEGER | read-only | The number of FDDI ports present on this board. |
| INT fbcmBasePortIndex | 1.3.6.1.4.1.43.7.1.4.1.1.5 | INTEGER | read-only | The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing port indices following this index. |
| fcm | 1.3.6.1.4.1.43.7.1.5 | |||
| fcmTable | 1.3.6.1.4.1.43.7.1.5.1 | not-accessible | A list of FDDI Concentrator Module (FCM) entries. An entry exists for each Slot Table Entry whose board type is FCM. This table is indexed by the physical slot number of this FCM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the lbSlot table. | |
| fcmEntry | 1.3.6.1.4.1.43.7.1.5.1.1 | not-accessible | An FCM entry contains information common to a single FDDI Concentrator Module (FCM) within a LinkBuilder 3GH system. | |
| INT fcmSlotIndex | 1.3.6.1.4.1.43.7.1.5.1.1.1 | INTEGER | read-only | The physical slot number of this slot within the LinkBuilder 3GH chassis. |
| INT fcmPortCount | 1.3.6.1.4.1.43.7.1.5.1.1.2 | INTEGER | read-only | The number of FDDI ports present on this board. |
| INT fcmBasePortIndex | 1.3.6.1.4.1.43.7.1.5.1.1.3 | INTEGER | read-only | The system-wide index of the first FDDI port on this board. Additional ports on this board will have consecutively increasing port indices following this index. |
| port | 1.3.6.1.4.1.43.7.1.6 | |||
| portTable | 1.3.6.1.4.1.43.7.1.6.1 | not-accessible | A list of port entries. A single instance of this object exists for each port (excluding Ethernet ports) in the LinkBuilder 3GH system. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available either via the fddiPort group or the enetPort group. | |
| portEntry | 1.3.6.1.4.1.43.7.1.6.1.1 | not-accessible | A port entry contains information common to a particular port located on a particular board within the LinkBuilder 3GH system. | |
| INT portSlotIndex | 1.3.6.1.4.1.43.7.1.6.1.1.1 | INTEGER | read-only | The physical slot number of this slot within the LinkBuilder 3GH chassis. |
| INT portIndex | 1.3.6.1.4.1.43.7.1.6.1.1.2 | INTEGER | read-only | The index of the port on a particular slot. |
| STR portLabel | 1.3.6.1.4.1.43.7.1.6.1.1.3 | DisplayString | read-write | An ASCII text string describing this port. |
| elm | 1.3.6.1.4.1.43.7.1.7 | |||
| elmTable | 1.3.6.1.4.1.43.7.1.7.1 | not-accessible | A list of Ethernet LAN Module (ELM) entries. An entry exists for each Slot Table Entry whose board type is ELM. This table is indexed by the physical slot number of this ELM within the LinkBuilder 3GH chassis. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available either via the slot group or the express group. | |
| elmEntry | 1.3.6.1.4.1.43.7.1.7.1.1 | not-accessible | An ELM entry contains information common to a single Ethernet LAN Module (ELM) within a LinkBuilder 3GH system. | |
| INT elmSlotIndex | 1.3.6.1.4.1.43.7.1.7.1.1.1 | INTEGER | read-only | The physical slot number of this slot within the LinkBuilder 3GH chassis. |
| INT elmFddiMACCount | 1.3.6.1.4.1.43.7.1.7.1.1.2 | INTEGER | read-only | The number of FDDI MACs present on this board. |
| INT elmBaseFddiMACIndex | 1.3.6.1.4.1.43.7.1.7.1.1.3 | INTEGER | read-only | The system-wide index of the first FDDI MAC on this board. Additional ports on this board will have consecutively increasing port indices following this index. |
| INT elmEthernetPortCount | 1.3.6.1.4.1.43.7.1.7.1.1.4 | INTEGER | read-only | The number of Ethernet ports present on this board. |
| INT elmBaseEthernetPortIndex | 1.3.6.1.4.1.43.7.1.7.1.1.5 | INTEGER | read-only | The system-wide index of the first Ethernet port on this board. Additional ports on this board will have consecutively increasing port indices following this index. |
| INT elmAddressThreshold | 1.3.6.1.4.1.43.7.1.7.1.1.6 | INTEGER | read-write | A reporting threshold for the total number of Ethernet addresses known for this board. When the threshold is reached, the event elmAddress- ThresholdEvent is generated. |
| elmFddiMAC | 1.3.6.1.4.1.43.7.1.8 | |||
| elmFddiMACTable | 1.3.6.1.4.1.43.7.1.8.1 | not-accessible | A list of ELM FDDI MAC entries. The entries need not have consecutive slot indices. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressFddiPort group. | |
| elmFddiMACEntry | 1.3.6.1.4.1.43.7.1.8.1.1 | not-accessible | An ELM FDDI MAC entry contains information common to an FDDI MAC located on an ELM within a LinkBuilder 3GH system. | |
| INT elmFddiSlotIndex | 1.3.6.1.4.1.43.7.1.8.1.1.1 | INTEGER | read-only | The physical slot number of this board. |
| INT elmFddiMACIndex | 1.3.6.1.4.1.43.7.1.8.1.1.2 | INTEGER | read-only | A unique value for each FDDI MAC on this board. |
| CTR elmFddiMACForwardedCts | 1.3.6.1.4.1.43.7.1.8.1.1.3 | Counter | read-only | A counter indicating the number of frames forwarded by a MAC from an Ethernet port to the FDDI network. |
| CTR elmFddiMACDroppedCts | 1.3.6.1.4.1.43.7.1.8.1.1.4 | Counter | read-only | A counter indicating the number of frames that were dropped by a MAC due to local resource limitation or unknown destination MAC address. |
| elmEthernetPort | 1.3.6.1.4.1.43.7.1.9 | |||
| elmEthernetPortTable | 1.3.6.1.4.1.43.7.1.9.1 | not-accessible | A list of ELM Ethernet LAN port entries. The slot indices may not be consecutive. The MAC indices must be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressEthernetPort group. | |
| elmEthernetPortEntry | 1.3.6.1.4.1.43.7.1.9.1.1 | not-accessible | An ELM Ethernet LAN port entry contains information common to an Ethernet port located on an Ethernet LAN Module (ELM) within a LinkBuilder 3GH system. | |
| INT elmEthernetPortSlotIndex | 1.3.6.1.4.1.43.7.1.9.1.1.1 | INTEGER | read-only | The physical slot number of the slot containing this port within the LinkBuilder 3GH chassis. |
| INT elmEthernetPortIndex | 1.3.6.1.4.1.43.7.1.9.1.1.2 | INTEGER | read-only | The index of the port on a particular ELM board. This index ranges from 1 to elmEthernetPortCount. |
| STR elmEthernetPortLabel | 1.3.6.1.4.1.43.7.1.9.1.1.3 | DisplayString | read-write | An ASCII text string describing this Ethernet port. |
| CTR elmEthernetPortForwardedCts | 1.3.6.1.4.1.43.7.1.9.1.1.4 | Counter | read-only | A counter indicating the number of frames forwarded from this Ethernet port onto the FDDI network. |
| CTR elmEthernetPortDroppedCts | 1.3.6.1.4.1.43.7.1.9.1.1.5 | Counter | read-only | A counter indicating the numer of frames received on this port that were dropped because the destination MAC address was determined to be on the same Ethernet segment as the source MAC address. |
| CTR elmEthernetPortUTurnCts | 1.3.6.1.4.1.43.7.1.9.1.1.6 | Counter | read-only | A counter indicating the number of frames received on this Ethernet port and directed to another Ethernet port. |
| INT elmEthernetPortState | 1.3.6.1.4.1.43.7.1.9.1.1.7 | INTEGER | read-write | The state of the Ethernet LAN port. This value can be set to enable or disable the Ethernet LAN port. |
| INT elmEthernetPortAction | 1.3.6.1.4.1.43.7.1.9.1.1.8 | INTEGER | read-write | This object, when read, always returns the value other (1). The result of setting this object to each acceptable value is: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all a port's dynamic addresses to be flushed from the port's address list. |
| elmMACAddress | 1.3.6.1.4.1.43.7.1.10 | |||
| elmEthernetMACAddressTable | 1.3.6.1.4.1.43.7.1.10.1 | not-accessible | A list of ELM Ethernet LAN Remote MAC Address entries. The slot indices may not be consecutive. The port indices must be consecutive. Note that this object has been marked as deprecated and is included here for backward compatibilty. It will be removed from the next revision of the lb3gh MIB. The objects defined in this table are now available via the expressEthernetPort group. | |
| elmEthernetMACAddressEntry | 1.3.6.1.4.1.43.7.1.10.1.1 | not-accessible | A collection of information describing a remote Ethernet MAC detected to be attached to an Ethernet LAN port. | |
| INT elmEthernetMACAddressSlotIndex | 1.3.6.1.4.1.43.7.1.10.1.1.1 | INTEGER | read-write | The physical slot number of the slot containing this ELM within the within th LinkBuilder 3GH chassis. |
| INT elmEthernetMACAddressPortIndex | 1.3.6.1.4.1.43.7.1.10.1.1.2 | INTEGER | read-write | The port index of this address entry within the table. This index ranges from 1 to elmEthernetPortCount. |
| INT elmEthernetMACAddressIndex | 1.3.6.1.4.1.43.7.1.10.1.1.3 | INTEGER | read-write | The index of this address entry within the table. |
| INT elmEthernetMACAddressType | 1.3.6.1.4.1.43.7.1.10.1.1.4 | INTEGER | read-write | This object, when read, always returns the value other (1). Setting this object to invalid (2) removes the corresponding address entry from the table. |
| OCT elmEthernetMACAddressRemoteAddress | 1.3.6.1.4.1.43.7.1.10.1.1.5 | OCTET STRING | read-write | The remote MAC address detected on this Ethernet LAN port. |
| INT elmEthernetMACAddressIsStatic | 1.3.6.1.4.1.43.7.1.10.1.1.6 | INTEGER | read-write | A value indicating whether this MAC address was statically configured or dynamically learned on this port. |
| INT elmEthernetMACAddressStaticPort | 1.3.6.1.4.1.43.7.1.10.1.1.7 | INTEGER | read-write | If the object elmEthernetMACAddress- IsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured. |
| INT elmEthernetMACAddressAge | 1.3.6.1.4.1.43.7.1.10.1.1.8 | INTEGER | read-write | This object indicates the time elapsed since this MAC address was added to this port's address table. |
| lbSystem | 1.3.6.1.4.1.43.7.1.11 | |||
| INT lbSystemId | 1.3.6.1.4.1.43.7.1.11.1 | INTEGER | read-only | The unique identifier assigned to this system during manufacturing. |
| INT lbSystemType | 1.3.6.1.4.1.43.7.1.11.2 | INTEGER | read-only | The type of the LinkBuilder system. |
| STR lbSystemName | 1.3.6.1.4.1.43.7.1.11.3 | DisplayString | read-only | The text string describing this system. |
| STR lbSystemManufacturer | 1.3.6.1.4.1.43.7.1.11.4 | DisplayString | read-only | The text string describing the manufacturer of this system. |
| OCT lbSystemBackplaneRevision | 1.3.6.1.4.1.43.7.1.11.5 | OCTET STRING | read-only | The revision level of the system backplane. Bits 6 and 7 indicate the artwork revision. Bits 0 through 5 indicate the rework level. |
| INT lbSystemSlotCount | 1.3.6.1.4.1.43.7.1.11.6 | INTEGER | read-only | The number of slots in the system. |
| INT lbSystemMemorySize | 1.3.6.1.4.1.43.7.1.11.7 | INTEGER | read-only | The amount of memory (RAM), in bytes, present on the system processor board. |
| INT lbSystemFlashMemorySize | 1.3.6.1.4.1.43.7.1.11.8 | INTEGER | read-only | The amount of flash memory, in bytes, present on the system processor board. |
| INT lbSystemNvMemorySize | 1.3.6.1.4.1.43.7.1.11.9 | INTEGER | read-only | The amount of non-volatile memory, in bytes, present on the system processor board. |
| OCT lbSystemSoftwareRevision | 1.3.6.1.4.1.43.7.1.11.10 | OCTET STRING | read-only | The revision number of the LinkBuilder system software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: update number. byte 3: bits 7-6: release type. bits 5-0: supplemental identifier. |
| STR lbSystemBuildTime | 1.3.6.1.4.1.43.7.1.11.11 | DisplayString | read-only | The build time of the system software. |
| OCT lbSystemControlPanelHardwareRevision | 1.3.6.1.4.1.43.7.1.11.12 | OCTET STRING | read-only | An 8-bit value specifying the revision level of the control panel hardware. |
| OCT lbSystemControlPanelSoftwareRevision | 1.3.6.1.4.1.43.7.1.11.13 | OCTET STRING | read-only | An 8-bit value specifying the revision level of the control panel software. |
| INT lbSystemControlPanelLines | 1.3.6.1.4.1.43.7.1.11.14 | INTEGER | read-only | The number of lines in the control panel display. |
| INT lbSystemControlPanelColumns | 1.3.6.1.4.1.43.7.1.11.15 | INTEGER | read-only | The number of columns in the control panel display. |
| OCT lbSystemControlPanelText | 1.3.6.1.4.1.43.7.1.11.16 | OCTET STRING | read-only | The currently displayed text in the control panel display. |
| INT lbSystemFddiMacCount | 1.3.6.1.4.1.43.7.1.11.17 | INTEGER | read-only | The number of FDDI MAC's present in the system. |
| INT lbSystemFddiPortCount | 1.3.6.1.4.1.43.7.1.11.18 | INTEGER | read-only | The number of FDDI ports present in the system. |
| INT lbSystemEthernetPortCount | 1.3.6.1.4.1.43.7.1.11.19 | INTEGER | read-only | The number of ethernet ports present in the system. |
| INT lbSystemExpressFunctionCount | 1.3.6.1.4.1.43.7.1.11.20 | INTEGER | read-only | The number of Ethernet Express functions present in the system. Curently this value is equal to the number of Express boards present in the system. |
| INT lbSystemExpressFddiPortCount | 1.3.6.1.4.1.43.7.1.11.21 | INTEGER | read-only | The number of Ethernet Express FDDI ports present in the system. |
| INT lbSystemExpressEthernetPortCount | 1.3.6.1.4.1.43.7.1.11.22 | INTEGER | read-only | The number of Ethernet Express ethernet ports present in the system. |
| INT lbSystemPowerSupplyCount | 1.3.6.1.4.1.43.7.1.11.23 | INTEGER | read-only | The number of power supply units present in the system. |
| INT lbSystemAction | 1.3.6.1.4.1.43.7.1.11.24 | INTEGER | read-write | This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: reset: resets the LinkBuilder system. |
| INT lbSystemBridgeFunctionCount | 1.3.6.1.4.1.43.7.1.11.25 | INTEGER | read-only | The number of bridge functions present in the system. Curently this value is equal to the sum of the number of Express and Switching modules in the system. |
| INT lbSystemSmtProxyTimeoutBase | 1.3.6.1.4.1.43.7.1.11.26 | INTEGER | read-write | The initial timeout value, in seconds, before the SMT proxy attempts to backoff and retry. Since the SMT proxy will attempt three retries before determining that the proxied station is not answering, with the timeout doubling for each retry, the total time for a request to time out is equal to seven times the base timeout value. |
| INT lbSystemSmtProxyEvents | 1.3.6.1.4.1.43.7.1.11.27 | INTEGER | read-write | This object determines if the SMT proxy will generate traps for SMT events occuring at other stations. If enabled, the SMT proxy will generate traps for all SMT events, those that occur locally, and those that occur at other stations. If disabled, the SMT proxy will only generate traps for events which occur locally. The default value for this object is enabled(1). |
| lbSlot | 1.3.6.1.4.1.43.7.1.12 | |||
| lbSlotTable | 1.3.6.1.4.1.43.7.1.12.1 | not-accessible | A list of slot entries. A single instance of this object exists for each slot in the LinkBuilder system. | |
| lbSlotEntry | 1.3.6.1.4.1.43.7.1.12.1.1 | not-accessible | A slot entry contains information common to a given slot within a LinkBuilder system. | |
| INT lbSlotIndex | 1.3.6.1.4.1.43.7.1.12.1.1.1 | INTEGER | read-only | The physical slot number of this slot within the system. |
| INT lbSlotBoardType | 1.3.6.1.4.1.43.7.1.12.1.1.2 | INTEGER | read-only | The type of board residing in this slot. |
| OCT lbSlotBoardRevision | 1.3.6.1.4.1.43.7.1.12.1.1.3 | OCTET STRING | read-only | The revision number of the board in this slot. |
| INT lbSlotBoardStatus | 1.3.6.1.4.1.43.7.1.12.1.1.4 | INTEGER | read-only | The status of the board in this slot. |
| STR lbSlotBoardName | 1.3.6.1.4.1.43.7.1.12.1.1.5 | DisplayString | read-only | The text string describing this board. |
| STR lbSlotBoardNameAbbrev | 1.3.6.1.4.1.43.7.1.12.1.1.6 | DisplayString | read-only | The abbreviation used to describe this board. |
| INT lbSlotFddiMacCount | 1.3.6.1.4.1.43.7.1.12.1.1.7 | INTEGER | read-only | The number of FDDI MAC's present in this slot. |
| INT lbSlotFddiMacBaseIndex | 1.3.6.1.4.1.43.7.1.12.1.1.8 | INTEGER | read-only | The index of the first FDDI MAC in this slot. |
| INT lbSlotFddiPortCount | 1.3.6.1.4.1.43.7.1.12.1.1.9 | INTEGER | read-only | The number of FDDI ports present in this slot. |
| INT lbSlotFddiPortBaseIndex | 1.3.6.1.4.1.43.7.1.12.1.1.10 | INTEGER | read-only | The index of the first FDDI port in this slot. |
| INT lbSlotEthernetPortCount | 1.3.6.1.4.1.43.7.1.12.1.1.11 | INTEGER | read-only | The number of ethernet ports present in this slot. |
| INT lbSlotEthernetPortBaseIndex | 1.3.6.1.4.1.43.7.1.12.1.1.12 | INTEGER | read-only | The index of the first ethernet port in this slot. |
| INT lbSlotExpressFunctionCount | 1.3.6.1.4.1.43.7.1.12.1.1.13 | INTEGER | read-only | The number of Express functions present in this slot. |
| INT lbSlotExpressFunctionBaseIndex | 1.3.6.1.4.1.43.7.1.12.1.1.14 | INTEGER | read-only | The index of the first Express function in this slot. |
| INT lbSlotExpressFddiPortCount | 1.3.6.1.4.1.43.7.1.12.1.1.15 | INTEGER | read-only | The number of Express FDDI ports present in this slot. |
| INT lbSlotExpressFddiPortBaseIndex | 1.3.6.1.4.1.43.7.1.12.1.1.16 | INTEGER | read-only | The index of the first Express FDDI port in this slot. |
| INT lbSlotExpressEthernetPortCount | 1.3.6.1.4.1.43.7.1.12.1.1.17 | INTEGER | read-only | The number of Express ethernet ports present in this slot. |
| INT lbSlotExpressEthernetPortBaseIndex | 1.3.6.1.4.1.43.7.1.12.1.1.18 | INTEGER | read-only | The index of the first Express ethernet port in this slot. |
| INT lbSlotBoardAction | 1.3.6.1.4.1.43.7.1.12.1.1.19 | INTEGER | read-write | This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: runDiagnostics: runs the board's offline diagnostics. |
| INT lbSlotBridgeFunctionCount | 1.3.6.1.4.1.43.7.1.12.1.1.20 | INTEGER | read-only | The number of bridge functions present in this slot. |
| INT lbSlotBridgeFunctionBaseIndex | 1.3.6.1.4.1.43.7.1.12.1.1.21 | INTEGER | read-only | The index of the first bridge function in this slot. |
| lbFddiMac | 1.3.6.1.4.1.43.7.1.13 | |||
| lbFddiMacTable | 1.3.6.1.4.1.43.7.1.13.1 | not-accessible | A list of FDDI MAC entries. A single instance of this object exists for each FDDI MAC present in the system. | |
| lbFddiMacEntry | 1.3.6.1.4.1.43.7.1.13.1.1 | not-accessible | An FDDI MAC entry contains information common to a particular FDDI MAC within the system. | |
| INT lbFddiMacIndex | 1.3.6.1.4.1.43.7.1.13.1.1.1 | INTEGER | read-only | A unique value for each FDDI MAC in the system. The MAC identified by a particular value of this index is the same MAC as identified by the same value of ifIndex. |
| INT lbFddiMacSlotIndex | 1.3.6.1.4.1.43.7.1.13.1.1.2 | INTEGER | read-only | The slot number corresponding to the physical location of this MAC. |
| INT lbFddiMacLocalIndex | 1.3.6.1.4.1.43.7.1.13.1.1.3 | INTEGER | read-only | The index of this MAC relative to the slot on which it is physically present. |
| INT lbFddiMacByteReceiveRate | 1.3.6.1.4.1.43.7.1.13.1.1.4 | INTEGER | read-only | The average number of bytes received per second by this MAC during the most recent sampling period. |
| INT lbFddiMacPeakByteReceiveRate | 1.3.6.1.4.1.43.7.1.13.1.1.5 | INTEGER | read-only | The peak value of lbFddiMacByteReceiveRate for this MAC since the system was last initialized. |
| INT lbFddiMacFrameReceiveRate | 1.3.6.1.4.1.43.7.1.13.1.1.6 | INTEGER | read-only | The average number of frames received per second by this MAC during the most recent sampling period. |
| INT lbFddiMacPeakFrameReceiveRate | 1.3.6.1.4.1.43.7.1.13.1.1.7 | INTEGER | read-only | The peak value of lbFddiMacFrameReceiveRate for this MAC since the system was last initialized. |
| INT lbFddiMacByteTransmitRate | 1.3.6.1.4.1.43.7.1.13.1.1.8 | INTEGER | read-only | The average number of bytes transmitted per second by this MAC during the most recent sampling period. |
| INT lbFddiMacPeakByteTransmitRate | 1.3.6.1.4.1.43.7.1.13.1.1.9 | INTEGER | read-only | The peak value of lbFddiMacByteTransmitRate for this MAC since the system was last initialized. |
| INT lbFddiMacFrameTransmitRate | 1.3.6.1.4.1.43.7.1.13.1.1.10 | INTEGER | read-only | The average number of frames transmitted per second by this MAC during the most recent sampling period. |
| INT lbFddiMacPeakFrameTransmitRate | 1.3.6.1.4.1.43.7.1.13.1.1.11 | INTEGER | read-only | The peak value of lbFddiMacFrameTransmitRate for this MAC since the system was last initialized. |
| INT lbFddiMacReceiveMulticastThreshold | 1.3.6.1.4.1.43.7.1.13.1.1.12 | INTEGER | read-write | The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate. |
| OCT lbFddiMacBeaconHistory | 1.3.6.1.4.1.43.7.1.13.1.1.13 | OCTET STRING | read-only | This object gives a history of the most recent beacon information received on this MAC. It can contain up to a maximum of eight records. Each record is of the form: source MAC: 6 bytes beacon data length: 2 bytes. beacon data: 0-16 bytes. |
| lbEthernetPort | 1.3.6.1.4.1.43.7.1.14 | |||
| lbEthernetPortTable | 1.3.6.1.4.1.43.7.1.14.1 | not-accessible | A list of ethernet port entries. A single instance of this object exists for each ethernet port present in the system. | |
| lbEthernetPortEntry | 1.3.6.1.4.1.43.7.1.14.1.1 | not-accessible | An ethernet port entry contains information common to a particular ethernet port within the system. | |
| INT lbEthernetPortIndex | 1.3.6.1.4.1.43.7.1.14.1.1.1 | INTEGER | read-only | A unique value for each ethernet port in the system. The port identified by a particular value of this index is the same port as identified by the same value of ifIndex. |
| INT lbEthernetPortSlotIndex | 1.3.6.1.4.1.43.7.1.14.1.1.2 | INTEGER | read-only | The slot number corresponding to the physical location of this port. |
| INT lbEthernetPortLocalIndex | 1.3.6.1.4.1.43.7.1.14.1.1.3 | INTEGER | read-only | The index of this port relative to the slot on which it is physically present. |
| STR lbEthernetPortLabel | 1.3.6.1.4.1.43.7.1.14.1.1.4 | DisplayString | read-write | An ASCII text string describing this port. |
| INT lbEthernetPortChipsetType | 1.3.6.1.4.1.43.7.1.14.1.1.5 | INTEGER | read-only | The type of chipset used to implement this port. |
| INT lbEthernetPortLinkStatus | 1.3.6.1.4.1.43.7.1.14.1.1.6 | INTEGER | read-only | The current value of the link status for this port. |
| INT lbEthernetPortByteReceiveRate | 1.3.6.1.4.1.43.7.1.14.1.1.7 | INTEGER | read-only | The average number of bytes received per second by this port during the most recent sampling period. |
| INT lbEthernetPortPeakByteReceiveRate | 1.3.6.1.4.1.43.7.1.14.1.1.8 | INTEGER | read-only | The peak value of lbEthernetPortByteReceiveRate for this port since the system was last initialized. |
| INT lbEthernetPortFrameReceiveRate | 1.3.6.1.4.1.43.7.1.14.1.1.9 | INTEGER | read-only | The average number of frames received per second by this port during the most recent sampling period. |
| INT lbEthernetPortPeakFrameReceiveRate | 1.3.6.1.4.1.43.7.1.14.1.1.10 | INTEGER | read-only | The peak value of lbEthernetPortFrameReceiveRate for this port since the system was last initialized. |
| INT lbEthernetPortByteTransmitRate | 1.3.6.1.4.1.43.7.1.14.1.1.11 | INTEGER | read-only | The average number of bytes transmitted per second by this port during the most recent sampling period. |
| INT lbEthernetPortPeakByteTransmitRate | 1.3.6.1.4.1.43.7.1.14.1.1.12 | INTEGER | read-only | The peak value of lbEthernetPortByteTransmitRate for this port since the system was last initialized. |
| INT lbEthernetPortFrameTransmitRate | 1.3.6.1.4.1.43.7.1.14.1.1.13 | INTEGER | read-only | The average number of frames transmitted per second by this port during the most recent sampling period. |
| INT lbEthernetPortPeakFrameTransmitRate | 1.3.6.1.4.1.43.7.1.14.1.1.14 | INTEGER | read-only | The peak value of lbEthernetPortFrameTransmitRate for this port since the system was last initialized. |
| INT lbEthernetPortReceiveMulticastThreshold | 1.3.6.1.4.1.43.7.1.14.1.1.15 | INTEGER | read-write | The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is one second. The default value for this object is zero which implies an infinite rate. |
| INT lbEthernetPortType | 1.3.6.1.4.1.43.7.1.14.1.1.16 | INTEGER | read-write | Specific description of this port's type. |
| lbFddiPort | 1.3.6.1.4.1.43.7.1.15 | |||
| lbFddiPortTable | 1.3.6.1.4.1.43.7.1.15.1 | not-accessible | A list of FDDI port entries. A single instance of this object exists for each FDDI port in the system. | |
| lbFddiPortEntry | 1.3.6.1.4.1.43.7.1.15.1.1 | not-accessible | A Port entry contains information common to a particular FDDI port in the system. | |
| INT lbFddiPortIndex | 1.3.6.1.4.1.43.7.1.15.1.1.1 | INTEGER | read-only | A unique value for each FDDI port in the system. It's value ranges between 1 and the value of lbSystemFddiPortCount. |
| INT lbFddiPortSlotIndex | 1.3.6.1.4.1.43.7.1.15.1.1.2 | INTEGER | read-only | The slot number corresponding to the physical location of this port. |
| INT lbFddiPortLocalIndex | 1.3.6.1.4.1.43.7.1.15.1.1.3 | INTEGER | read-only | The index of this port relative to the slot on which it is physically present. |
| STR lbFddiPortLabel | 1.3.6.1.4.1.43.7.1.15.1.1.4 | DisplayString | read-write | An ASCII text string describing this port. |
| lbExpress | 1.3.6.1.4.1.43.7.1.16 | |||
| lbExpressTable | 1.3.6.1.4.1.43.7.1.16.1 | not-accessible | A list of Express function entries. | |
| lbExpressEntry | 1.3.6.1.4.1.43.7.1.16.1.1 | not-accessible | An Express entry contains information common to a particular Express function in a given system. | |
| INT lbExpressIndex | 1.3.6.1.4.1.43.7.1.16.1.1.1 | INTEGER | read-only | A unique value for each Express function in the system. It's value ranges between 1 and the value of lbSystemExpressFunctionCount. |
| INT lbExpressSlotIndex | 1.3.6.1.4.1.43.7.1.16.1.1.2 | INTEGER | read-only | The slot number corresponding to the physical location of this function. |
| INT lbExpressLocalIndex | 1.3.6.1.4.1.43.7.1.16.1.1.3 | INTEGER | read-only | The index of this function relative to the slot on which it is physically present. |
| INT lbExpressAddressThreshold | 1.3.6.1.4.1.43.7.1.16.1.1.4 | INTEGER | read-write | A reporting threshold for the total number of Ethernet Addresses known for this board. When this threshold is reached, the event lbEemAddressThresholdEvent is generated. |
| lbExpressFddiPort | 1.3.6.1.4.1.43.7.1.17 | |||
| lbExpressFddiPortTable | 1.3.6.1.4.1.43.7.1.17.1 | not-accessible | A list of Express FDDI port entries. | |
| lbExpressFddiPortEntry | 1.3.6.1.4.1.43.7.1.17.1.1 | not-accessible | A Port entry contains information for a particular Express FDDI port in a given system. | |
| INT lbExpressFddiPortIndex | 1.3.6.1.4.1.43.7.1.17.1.1.1 | INTEGER | read-only | A unique value for each Express port in the system. It's value ranges between 1 and the value of lbSystemExpressFddiPortCount. |
| INT lbExpressFddiPortSlotIndex | 1.3.6.1.4.1.43.7.1.17.1.1.2 | INTEGER | read-only | The slot number corresponding to the physical location of this port. |
| INT lbExpressFddiPortLocalIndex | 1.3.6.1.4.1.43.7.1.17.1.1.3 | INTEGER | read-only | The index of this port relative to the slot on which it is physically present. |
| CTR lbExpressFddiPortForwardedCts | 1.3.6.1.4.1.43.7.1.17.1.1.4 | Counter | read-only | The number of frames forwarded by this MAC from an ethernet port to the FDDI network. |
| CTR lbExpressFddiPortDroppedCts | 1.3.6.1.4.1.43.7.1.17.1.1.5 | Counter | read-only | The number of frames received by this MAC that were not forwarded. |
| lbExpressEthernetPort | 1.3.6.1.4.1.43.7.1.18 | |||
| lbExpressEthernetPortTable | 1.3.6.1.4.1.43.7.1.18.1 | not-accessible | A list of Express ethernet port entries. | |
| lbExpressEthernetPortEntry | 1.3.6.1.4.1.43.7.1.18.1.1 | not-accessible | An Expres ethernet port entry contains information common to a particular Express ethernet port located in the system. | |
| INT lbExpressEthernetPortIndex | 1.3.6.1.4.1.43.7.1.18.1.1.1 | INTEGER | read-only | A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lbSystemExpressEthernetPortCount. |
| INT lbExpressEthernetPortSlotIndex | 1.3.6.1.4.1.43.7.1.18.1.1.2 | INTEGER | read-only | The slot number corresponding to the physical location of this port. |
| INT lbExpressEthernetPortLocalIndex | 1.3.6.1.4.1.43.7.1.18.1.1.3 | INTEGER | read-only | The index of this port relative to the slot on which it is physically present. |
| CTR lbExpressEthernetPortForwardedCts | 1.3.6.1.4.1.43.7.1.18.1.1.4 | Counter | read-only | The number of frames forwarded from this ethernet port to the FDDI network. |
| CTR lbExpressEthernetPortDroppedCts | 1.3.6.1.4.1.43.7.1.18.1.1.5 | Counter | read-only | The number of frames received by this ethernet port that were not forwarded or u-turned. |
| CTR lbExpressEthernetPortUTurnCts | 1.3.6.1.4.1.43.7.1.18.1.1.6 | Counter | read-only | The number of frames received by this ethernet port that were directed to another ethernet port. |
| INT lbExpressEthernetPortAction | 1.3.6.1.4.1.43.7.1.18.1.1.7 | INTEGER | read-write | This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from a port's address list. flushDynamicAddress: causes all the port's dynamic addresses to be flushed from a port's address list. |
| lbExpressEthernetPortAddress | 1.3.6.1.4.1.43.7.1.19 | |||
| lbExpressEthernetPortAddressTable | 1.3.6.1.4.1.43.7.1.19.1 | not-accessible | A list of Express Remote MAC Address entries. | |
| lbExpressEthernetPortAddressEntry | 1.3.6.1.4.1.43.7.1.19.1.1 | not-accessible | An entry contains information describing a remote Ethernet MAC detected to be attached to an Express port. | |
| INT lbExpressEthernetPortAddressPortIndex | 1.3.6.1.4.1.43.7.1.19.1.1.1 | INTEGER | read-write | A unique value for each Express ethernet port in the system. It's value ranges between 1 and the value of lbSystemExpressEthernetPortCount. |
| INT lbExpressEthernetPortAddressIndex | 1.3.6.1.4.1.43.7.1.19.1.1.2 | INTEGER | read-write | The index of this address entry within the address table. |
| INT lbExpressEthernetPortAddressSlotIndex | 1.3.6.1.4.1.43.7.1.19.1.1.3 | INTEGER | read-write | The slot number corresponding to the physical location of this port. |
| INT lbExpressEthernetPortAddressType | 1.3.6.1.4.1.43.7.1.19.1.1.4 | INTEGER | read-write | This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table. |
| OCT lbExpressEthernetPortAddressRemoteAddress | 1.3.6.1.4.1.43.7.1.19.1.1.5 | OCTET STRING | read-write | The remote MAC address detected on this port. |
| INT lbExpressEthernetPortAddressIsStatic | 1.3.6.1.4.1.43.7.1.19.1.1.6 | INTEGER | read-write | A value indicating whether this MAC address was statically configured or was dynamically learned on this port. |
| INT lbExpressEthernetPortAddressStaticPort | 1.3.6.1.4.1.43.7.1.19.1.1.7 | INTEGER | read-write | If the object lbExpressEthernetPortAddressIsStatic has value isStatic(1), this object indicates the port for which this MAC address was statically configured. |
| INT lbExpressEthernetPortAddressAge | 1.3.6.1.4.1.43.7.1.19.1.1.8 | INTEGER | read-write | This object indicates the time, in seconds, elapsed since this MAC address was added to this port's address table. |
| lbPowerSupply | 1.3.6.1.4.1.43.7.1.20 | |||
| lbPowerSupplyTable | 1.3.6.1.4.1.43.7.1.20.1 | not-accessible | A list of power supply entries. | |
| lbPowerSupplyEntry | 1.3.6.1.4.1.43.7.1.20.1.1 | not-accessible | A power supply entry contains information common for a particular power supply unit in the system. | |
| INT lbPowerSupplyIndex | 1.3.6.1.4.1.43.7.1.20.1.1.1 | INTEGER | read-only | A unique value for each power supply in the system. It's value ranges between 1 and the value of lbSystemPowerSupplyCount. |
| INT lbPowerSupplyLocation | 1.3.6.1.4.1.43.7.1.20.1.1.2 | INTEGER | read-only | The physical slot in which this power supply unit resides in the system. |
| INT lbPowerSupplyStatus | 1.3.6.1.4.1.43.7.1.20.1.1.3 | INTEGER | read-only | The status of the power supply. A value of 0 indicates a working unit. A non-zero value represents a bit mask of the possible failure types. Each set bit indicates the following failure type: bit0: systemAcFailure bit1: systemPlus5Failure bit2: systemPlus12Failure bit3: systemOverTemperatureFailure. |
| INT lbPowerSupplyFailureType | 1.3.6.1.4.1.43.7.1.20.1.1.4 | INTEGER | not-accessible | This object is sent in the varlist when the lbPowerSupplyFailureEvent trap is generated. It indicates the particular failure type that caused this trap to be generated. |
| INT lbPowerSupplyLastFailure | 1.3.6.1.4.1.43.7.1.20.1.1.5 | INTEGER | read-only | This object represents the most recent power supply failure type. If no failure has occured, the value of this object is none. This object is included in the varlist when the lbPowerSupplyFailureEvent trap is generated. It indicates the failure type that caused the trap to be generated. |
| lbBridge | 1.3.6.1.4.1.43.7.1.21 | |||
| lbBridgeTable | 1.3.6.1.4.1.43.7.1.21.1 | not-accessible | A list of bridge function entries. | |
| lbBridgeEntry | 1.3.6.1.4.1.43.7.1.21.1.1 | not-accessible | A bridge entry contains information common to a particular bridge function in a given system. | |
| INT lbBridgeIndex | 1.3.6.1.4.1.43.7.1.21.1.1.1 | INTEGER | read-only | A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount. |
| INT lbBridgeBaseSlotIndex | 1.3.6.1.4.1.43.7.1.21.1.1.2 | INTEGER | read-only | The slot number of the lowest numbered slot which contains a physical port that this bridge function controls. |
| INT lbBridgePortCount | 1.3.6.1.4.1.43.7.1.21.1.1.3 | INTEGER | read-only | The number of ports that this bridge function controls. |
| INT lbBridgeAddressTableSize | 1.3.6.1.4.1.43.7.1.21.1.1.4 | INTEGER | read-only | The size of the address table for this bridge function. |
| INT lbBridgeAddressThreshold | 1.3.6.1.4.1.43.7.1.21.1.1.5 | INTEGER | read-write | A reporting threshold for the total number of addresses known for this board. When this threshold is reached, the event lbBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the value reported by lbBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the value of lbBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lbBridgeAddressThresholdEvents since the limit will never be reached. |
| INT lbBridgeMode | 1.3.6.1.4.1.43.7.1.21.1.1.6 | INTEGER | read-write | The operational mode of this bridge function. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation. |
| INT lbBridgeLocalIndex | 1.3.6.1.4.1.43.7.1.21.1.1.7 | INTEGER | read-only | The index of this bridge function relative to the slot on which it is physically present. |
| lbBridgePortTable | 1.3.6.1.4.1.43.7.1.21.2 | not-accessible | A list of bridge port entries. | |
| lbBridgePortEntry | 1.3.6.1.4.1.43.7.1.21.2.1 | not-accessible | A Port entry contains information for a particular bridge port in a given system. | |
| INT lbBridgePortBridgeIndex | 1.3.6.1.4.1.43.7.1.21.2.1.1 | INTEGER | read-only | A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount. |
| INT lbBridgePortIndex | 1.3.6.1.4.1.43.7.1.21.2.1.2 | INTEGER | read-only | A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. |
| INT lbBridgePortSlotIndex | 1.3.6.1.4.1.43.7.1.21.2.1.3 | INTEGER | read-only | The slot number corresponding to the physical location of this port. |
| INT lbBridgePortLocalIndex | 1.3.6.1.4.1.43.7.1.21.2.1.4 | INTEGER | read-only | The index of this port relative to the slot on which it is physically present and its port type. For example FDDI ports in a slot are identified with local indices from 1 to the number of FDDI ports in that slot, and the Ethernet ports in the same slot are identified with local indices from 1 to the number of Ethernet ports in that slot. |
| INT lbBridgePortType | 1.3.6.1.4.1.43.7.1.21.2.1.5 | INTEGER | read-only | The type of this port. |
| INT lbBridgePortIpFragmentationEnabled | 1.3.6.1.4.1.43.7.1.21.2.1.6 | INTEGER | read-write | A flag indicating whether or not IP fragmentation is enabled on this bridge port. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation. |
| INT lbBridgePortReceiveMulticastLimit | 1.3.6.1.4.1.43.7.1.21.2.1.7 | INTEGER | read-write | The maximum number of multicast frames per second that can be received in the sample interval. The sample interval is four seconds. The default value for this object is zero which implies an infinite rate. |
| INT lbBridgePortAddressAction | 1.3.6.1.4.1.43.7.1.21.2.1.8 | INTEGER | read-write | This object, when read, always returns the value other (1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: causes all the addresses to be flushed from the port's address list. flushDynamicAddress: causes all dynamic addresses to be flushed from the port's address list. |
| CTR lbBridgePortTotalForwardedCts | 1.3.6.1.4.1.43.7.1.21.2.1.9 | Counter | read-only | The total number of frames forwarded from this port to all other ports of this bridge. Note that the total forwarded count is NOT equal to the receive count minus the discard count, as a single received multicast/broadcast frame can be forwarded to multiple bridge ports. Also frames which are 'flooded' because of unknown destination addresses account for multiple forwarding as well. The total forwarding count is the instantaneous sumation of the 'forwarded to' counts to all other ports of the bridge. |
| CTR lbBridgePortManagementFramesReceived | 1.3.6.1.4.1.43.7.1.21.2.1.10 | Counter | read-only | The number of bridge management frames received by this port. |
| CTR lbBridgePortTotalDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.11 | Counter | read-only | The total number of frames discarded by this port. |
| CTR lbBridgePortReceiveBlockedDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.12 | Counter | read-only | The number of frames discarded by this port because the the receiving bridge port was not in the 'forwarding' state. |
| CTR lbBridgePortReceiveMulticastLimitExceededs | 1.3.6.1.4.1.43.7.1.21.2.1.13 | Counter | read-only | The number of multicast/broadcast frames discarded by this port because the lbBridgePortReceiveMulticastLimit was exceeded. |
| CTR lbBridgePortReceiveSecurityDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.14 | Counter | read-only | The number of frames discarded by this port because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears to have moved. |
| CTR lbBridgePortReceiveUnknownDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.15 | Counter | read-only | The number of frames discarded by this port because the destination address was unknown. Note that this counter is only valid for FDDI ports, and only when the bridge is an EEM, or an ESM operating in express mode. |
| CTR lbBridgePortReceiveOtherDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.16 | Counter | read-only | The number of frames discarded by this port because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops). |
| CTR lbBridgePortReceiveErrorDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.17 | Counter | read-only | The number of frames discarded by this port because of internal bridge system errors (e.g., hardware and software address table discrepencies). |
| CTR lbBridgePortSameSegmentDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.18 | Counter | read-only | The number of frames discarded by this port because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged. |
| CTR lbBridgePortTransmitBlockedDiscards | 1.3.6.1.4.1.43.7.1.21.2.1.19 | Counter | read-only | The number of frames discarded by this port because the the transmitting bridge port was not in the 'forwarding' state. |
| CTR lbBridgePortTotalFiltered | 1.3.6.1.4.1.43.7.1.21.2.1.20 | Counter | read-only | The total number of frames discarded by this port due to user defined filters. |
| CTR lbBridgePortReceiveUnicastFiltered | 1.3.6.1.4.1.43.7.1.21.2.1.21 | Counter | read-only | The number of frames discarded by this port due to user defined receive path filters. |
| CTR lbBridgePortReceiveMulticastFiltered | 1.3.6.1.4.1.43.7.1.21.2.1.22 | Counter | read-only | The number of frames discarded by this port due to user defined receive multicast path filters. |
| CTR lbBridgePortTransmitUnicastFiltered | 1.3.6.1.4.1.43.7.1.21.2.1.23 | Counter | read-only | The number of frames discarded by this port due to user defined transmit path filters. |
| CTR lbBridgePortTransmitMulticastFiltered | 1.3.6.1.4.1.43.7.1.21.2.1.24 | Counter | read-only | The number of frames discarded by this port due to user defined transmit multicast path filters. |
| CTR lbBridgePortReceiveMulticastLimitExceededCount | 1.3.6.1.4.1.43.7.1.21.2.1.25 | Counter | read-only | The number of times the lbBridgePortReceiveMulticastLimit was exceeded. |
| lbBridgePortForwardedToTable | 1.3.6.1.4.1.43.7.1.21.3 | not-accessible | A list of port forwarding count information. | |
| lbBridgePortForwardedToEntry | 1.3.6.1.4.1.43.7.1.21.3.1 | not-accessible | A bridge port forwarded-to entry contains information on the count of frames forwarded from the receiving port indicated by the corresponding lbBridgePortForwardedToReceivePortIndex, to the destination port indicated by the corresponding lbBridgePortForwardedToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lbBridgePortForwardedToReceivePortIndex and the lbBridgePortForwardedToDstPortIndex objects. | |
| INT lbBridgePortForwardedToBridgeIndex | 1.3.6.1.4.1.43.7.1.21.3.1.1 | INTEGER | read-only | A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount. |
| INT lbBridgePortForwardedToReceivePortIndex | 1.3.6.1.4.1.43.7.1.21.3.1.2 | INTEGER | read-only | A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is forwarding frames. |
| INT lbBridgePortForwardedToDstPortIndex | 1.3.6.1.4.1.43.7.1.21.3.1.3 | INTEGER | read-only | A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being forwarded. |
| CTR lbBridgePortForwardedToCount | 1.3.6.1.4.1.43.7.1.21.3.1.4 | Counter | read-only | The count of frames forwarded from the receiving port to the destination port. |
| lbBridgePortFilteredToTable | 1.3.6.1.4.1.43.7.1.21.4 | not-accessible | A list of port filtering count information. | |
| lbBridgePortFilteredToEntry | 1.3.6.1.4.1.43.7.1.21.4.1 | not-accessible | A bridge port filtered-to entry contains information on the count of frames filtered from the receiving port indicated by the corresponding lbBridgePortFilteredToReceivePortIndex, to the destination port indicated by the corresponding lbBridgePortFilteredToDstPortIndex. Note that no entries exist which are indexed with the same values for both the lbBridgePortFilteredToReceivePortIndex and the lbBridgePortFilteredToDstPortIndex objects. | |
| INT lbBridgePortFilteredToBridgeIndex | 1.3.6.1.4.1.43.7.1.21.4.1.1 | INTEGER | read-only | A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount. |
| INT lbBridgePortFilteredToReceivePortIndex | 1.3.6.1.4.1.43.7.1.21.4.1.2 | INTEGER | read-only | A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the receiving port which is filtering frames. |
| INT lbBridgePortFilteredToDstPortIndex | 1.3.6.1.4.1.43.7.1.21.4.1.3 | INTEGER | read-only | A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. This port index refers to the destination port to which frames are being filtered. |
| CTR lbBridgePortFilteredToCount | 1.3.6.1.4.1.43.7.1.21.4.1.4 | Counter | read-only | The count of frames filtered from the receiving port to the destination port. |
| lbBridgePortAddressTable | 1.3.6.1.4.1.43.7.1.21.5 | not-accessible | A list of bridge port address entries. | |
| lbBridgePortAddressEntry | 1.3.6.1.4.1.43.7.1.21.5.1 | not-accessible | An bridge port address entry contains information about particular bridge port address in a given system. | |
| INT lbBridgePortAddressBridgeIndex | 1.3.6.1.4.1.43.7.1.21.5.1.1 | INTEGER | read-only | A unique value for each bridge function in the system. It's value ranges between 1 and the value of lbSystemBridgeFunctionCount. |
| INT lbBridgePortAddressPortIndex | 1.3.6.1.4.1.43.7.1.21.5.1.2 | INTEGER | read-only | A unique value for each bridge port controlled by a given bridge function. It's value ranges between 1 and the value of lbBridgePortCount for the bridge function which this entry references. |
| INT lbBridgePortAddressIndex | 1.3.6.1.4.1.43.7.1.21.5.1.3 | INTEGER | read-only | The index of this address entry within the bridge address table. |
| OCT lbBridgePortAddressRemoteAddress | 1.3.6.1.4.1.43.7.1.21.5.1.4 | OCTET STRING | read-write | The remote MAC address detected on the port corresponding to this entry. Setting this object attempts to create a new entry in the table. Since the value of lbBridgePortAddressIndex is determined automatically internal to the bridge, a set is only successful if the index value specified for lbBridgePortAddressIndex is zero. A get-next using the values of lbBridgePortAddressBridgeIndex and lbBridgePortAddressPortIndex can be used to determine the address index assigned to the newly added address entry. |
| INT lbBridgePortAddressType | 1.3.6.1.4.1.43.7.1.21.5.1.5 | INTEGER | read-write | This object, when read, always returns the value other (1). Setting this object to invalid (2) will remove the corresponding address entry from the table. |
| INT lbBridgePortAddressIsStatic | 1.3.6.1.4.1.43.7.1.21.5.1.6 | INTEGER | read-write | A value indicating whether this MAC address was statically configured or was dynamically learned. |
| INT lbBridgePortAddressStaticPort | 1.3.6.1.4.1.43.7.1.21.5.1.7 | INTEGER | read-only | If the object lbBridgePortAddressIsStatic has value isStatic(1), this object indicates the local port index (as reported by lbBridgePortLocalIndex) for which this MAC address was statically configured. If the object lbBridgePortAddressIsStatic has the value isDynamic(2), the value of this object is 0. |
| INT lbBridgePortAddressAge | 1.3.6.1.4.1.43.7.1.21.5.1.8 | INTEGER | read-only | This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the port corresponding to this entry. |
| lbTrapEnterprise | 1.3.6.1.4.1.43.7.1.22 | |||
| lbTrapEnterpriseTable | 1.3.6.1.4.1.43.7.1.22.1 | not-accessible | This table contains a listing of enterprises under which various traps are defined. In all cases except for the MIB-II generic traps, the enterprise under which a trap is defined is the same as that appearing in the ENTERPRISE portion of the trap. Associated with each trap enterprise is a trap enterprise index. | |
| lbTrapEnterpriseTableEntry | 1.3.6.1.4.1.43.7.1.22.1.1 | not-accessible | Information relating a specific trap enterprise OID with a trap enterprise index. | |
| INT lbTrapEnterpriseIndex | 1.3.6.1.4.1.43.7.1.22.1.1.1 | INTEGER | read-only | A unique index corresponding to a particular enterprise OID under which traps are defined. This value of this object corresponding to a particular enterprise OID will remain constant accross system resets. |
| OID lbTrapEnterpriseOID | 1.3.6.1.4.1.43.7.1.22.1.1.2 | OBJECT IDENTIFIER | read-only | An enterpise OID under which traps are defined. |
| lbTrapDest | 1.3.6.1.4.1.43.7.1.23 | |||
| lbTrapDestTable | 1.3.6.1.4.1.43.7.1.23.1 | not-accessible | This table contains information specifying which traps will be transmitted by the LANplex to a given destination address. The table is indexed by the destination address, the index of the enterprise which generates the trap, and the trap number. Each entry in the table with a status of valid identifies a trap which, when generated, will be transmitted to the corresponding destination address listed in that entry. | |
| lbTrapDestTableEntry | 1.3.6.1.4.1.43.7.1.23.1.1 | not-accessible | Information relating a trap with a destination address to which the trap will be sent when it is generated. | |
| IP lbTrapDestAddr | 1.3.6.1.4.1.43.7.1.23.1.1.1 | IpAddress | read-only | The network address to which the trap identified by this entry is to be transmitted. |
| INT lbTrapDestEnterpriseIndex | 1.3.6.1.4.1.43.7.1.23.1.1.2 | INTEGER | read-only | The enterprise index of the enterprise identified in this entry. The value of this object is the same as the lbTrapEnterpriseIndex value for a given enterprise. |
| INT lbTrapNumber | 1.3.6.1.4.1.43.7.1.23.1.1.3 | INTEGER | read-only | The number of the trap within the corresponding enterprise for this entry. |
| INT lbTrapEntryStatus | 1.3.6.1.4.1.43.7.1.23.1.1.4 | INTEGER | read-write | The status of the trap destination table entry. Setting this object to valid has the effect of attempting to add the row corresponding to the instance specified. If the instance already exists, the set is successful (with no new entry added). If the instance specified is invalid, the set fails, otherwise the set succeeds and results in a new entry being added to the table. Setting this object to invalid has the effect of removing the corresponding entry from the table. |
RFC description
3Com LinkBuilder 3GH hub management information base for bridge, FDDI, and Ethernet port configuration and monitoring.
Start monitoring 3Com LinkBuilder hub/FDDI concentrator chassis with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.