LB3GH-1-0-7 :: lbBridgeAddressThreshold

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › LB3GH-1-0-7 › lbBridgeAddressThreshold

lbBridgeAddressThreshold

Module: LB3GH-1-0-7

OID (symbolic): LB3GH-1-0-7::lbBridgeAddressThreshold

OID (numeric): 1.3.6.1.4.1.43.7.1.21.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: A reporting threshold for the total number of addresses known for this board. When this threshold is reached, the event lbBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the value reported by lbBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the value of lbBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of lbBridgeAddressThresholdEvents since the limit will never be reached.

What is lbBridgeAddressThreshold?

An admin-configurable threshold on the number of learned addresses for this bridge function; reaching it fires the lbBridgeAddressThresholdEvent trap. Setting it to one more than lbBridgeAddressTableSize effectively disables the alert since the limit can never be reached.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.7.1.21.1.1.5
snmpwalk -v2c -c public <target> LB3GH-1-0-7::lbBridgeAddressThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.7.1.21.1.1.5.1
snmpget -v2c -c public <target> LB3GH-1-0-7::lbBridgeAddressThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.7.1.21.1.1.5.1 i <value>

Start monitoring 3Com LinkBuilder hub/FDDI concentrator chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LB3GH-1-0-7::lbBridgeAddressThreshold OID value, configure state conditions and alerts, and monitor any 3Com LinkBuilder hub/FDDI concentrator chassis from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.7linkBuilder3GH_mibA3Com-products-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.7.1lb3ghMibLB3GH-1-0-7
1.3.6.1.4.1.43.7.1.21lbBridgeLB3GH-1-0-7
1.3.6.1.4.1.43.7.1.21.1lbBridgeTableLB3GH-1-0-7
1.3.6.1.4.1.43.7.1.21.1.1lbBridgeEntryLB3GH-1-0-7
1.3.6.1.4.1.43.7.1.21.1.1.5lbBridgeAddressThresholdLB3GH-1-0-7