All MIBs › Juniper-PPPOE-PROFILE-MIB › juniPppoeProfileSubUrl
juniPppoeProfileSubUrl
Module: Juniper-PPPOE-PROFILE-MIB
OID (symbolic): Juniper-PPPOE-PROFILE-MIB::juniPppoeProfileSubUrl
OID (numeric): 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substitutions applied: %D is replaced with the profile name %d is replaced with the domain name %u is replaced with the user name %U is replaced with the user/domain name together %% is replaced with the % character
The resulting string must not be greater than 127 octets long. The client may use this URL as the initial web-page for the user.
What is juniPppoeProfileSubUrl?
This value sets a URL, up to 127 characters after substitutions, sent via a PADM control packet on the PPPoE sub-interface, supporting placeholders like %u for username and %d for domain name, which a client may use as the user's initial web page. An admin uses this to redirect newly connected subscribers to a specific portal, such as a billing or welcome page personalized with their username. For example, setting juniPppoeProfileSubUrl to 'https://portal.example.com/welcome?user=%u' sends each subscriber a personalized welcome-page link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5 snmpwalk -v2c -c public <target> Juniper-PPPOE-PROFILE-MIB::juniPppoeProfileSubUrl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5.1 snmpget -v2c -c public <target> Juniper-PPPOE-PROFILE-MIB::juniPppoeProfileSubUrl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5.1 s <value>
Start monitoring Juniper E-series broadband aggregation router (BRAS, PPPoE subscriber profiles) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-PPPOE-PROFILE-MIB::juniPppoeProfileSubUrl OID value, configure state conditions and alerts, and monitor any Juniper E-series broadband aggregation router (BRAS, PPPoE subscriber profiles) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| 1.3.6.1.4.1.4874.2.2.46 | juniPppoeProfileMIB | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.46.1 | juniPppoeProfileObjects | Juniper-PPPOE-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.46.1.1 | juniPppoeProfile | Juniper-PPPOE-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.46.1.1.1 | juniPppoeProfileTable | Juniper-PPPOE-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.46.1.1.1.1 | juniPppoeProfileEntry | Juniper-PPPOE-PROFILE-MIB |
| 1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5 | juniPppoeProfileSubUrl | Juniper-PPPOE-PROFILE-MIB |