IPAD-MIB :: ipadDLCIdEctrl

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › IPAD-MIB › ipadDLCIdEctrl

ipadDLCIdEctrl

Module: IPAD-MIB

OID (symbolic): IPAD-MIB::ipadDLCIdEctrl

OID (numeric): 1.3.6.1.4.1.321.100.1.4.1.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Determines if the Rx monitor will set the DE bit on all frames received in excess of the CIR before they are switched to their destination port.

What is ipadDLCIdEctrl?

When enabled, makes the receive monitor set the Discard Eligible (DE) bit on frames received in excess of CIR on this DLCI before switching them onward.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.1.4.1.1.16
snmpwalk -v2c -c public <target> IPAD-MIB::ipadDLCIdEctrl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.1.4.1.1.16.1
snmpget -v2c -c public <target> IPAD-MIB::ipadDLCIdEctrl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.1.4.1.1.16.1 i <value>

Start monitoring Verilink IPAD Integrated Access Device (Frame Relay WAN port) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPAD-MIB::ipadDLCIdEctrl OID value, configure state conditions and alerts, and monitor any Verilink IPAD Integrated Access Device (Frame Relay WAN port) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.321verilinkDS8200v2-TC-MIB
1.3.6.1.4.1.321.100hbuDS8200v2-TC-MIB
1.3.6.1.4.1.321.100.1ipadIPAD-IPSTART-MIB
1.3.6.1.4.1.321.100.1.4ipadDLCIIPAD-IPSTART-MIB
Numeric OIDNameModule
1.3.6.1.4.1.321.100.1.4.1ipadDLCITableIPAD-MIB
1.3.6.1.4.1.321.100.1.4.1.1ipadDLCITableEntryIPAD-MIB
1.3.6.1.4.1.321.100.1.4.1.1.16ipadDLCIdEctrlIPAD-MIB