INTELCORPORATIONSERVERHEALTHMAPPER-MIB

All MIBs › INTELCORPORATIONSERVERHEALTHMAPPER-MIB

Category: Domain: Server Hardware, Vendor: Intel

Description: Intel Corporation server health mapper MIB providing OID mapping to correlate health events with specific hardware components.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTELCORPORATIONSERVERHEALTHMAPPER-MIB?

INTELCORPORATIONSERVERHEALTHMAPPER-MIB is a vendor-specific Intel server-management MIB that maps low-level hardware health events and attributes to a normalized set of health-contribution objects, so that individual component faults can be correlated to an overall server health score. It exposes contribution tables (tServerHealthContributionTable, eServerHealthContributionTable) that associate a health attribute ID, component, and group with a contribution value and whether that value was obtained through active polling, plus filter tables for scoping which contributions are considered. This module is explicitly built for monitoring the hardware status of a server — aggregating many individual hardware health signals (each identified by a2HealthAttributeId/a2Component/a2Group) into contribution values that feed an overall system health computation. It is part of Intel's broader server-management framework and depends on lower-level Intel sensor/health-event MIBs (or IPMI-derived data) as the source of the raw attribute values it maps and aggregates. It is deployed on Intel server platforms/motherboards where a management console needs a single rolled-up health indicator derived from many individual component-level fault sources. Engineers can download the INTELCORPORATIONSERVERHEALTHMAPPER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTELCORPORATIONSERVERHEALTHMAPPER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel server platform/motherboard
Intel-based rack or blade server

Monitoring Examples

A management console would poll tServerHealthContributionTable/eServerHealthContributionTable, keyed by a2ContributionTableIndex, to read a2Contribution for a given a2Component and a2Group, revealing which specific hardware component is dragging down overall server health. a2HealthAttributeId identifies which underlying health signal (e.g., a specific sensor or fault condition) produced that contribution, while a2UpdateThroughPolling indicates whether the value was actively refreshed via polling versus passively cached. tServerHealthFilterTable/eServerHealthFilterTable let an administrator scope which contributions are included when computing the rolled-up health status.

What Can Be Monitored

per-component health contribution value
health attribute source/ID
component and group identifiers
whether health data was refreshed via active polling

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

NOTIFICATION-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
intel	1.3.6.1.4.1.343
products	1.3.6.1.4.1.343.2
server_management	1.3.6.1.4.1.343.2.10
dmtfGroups	1.3.6.1.4.1.343.2.10.7
tServerHealthContributionTable	1.3.6.1.4.1.343.2.10.7.12		not-accessible	The groups that may contribute to the decision of the server health
eServerHealthContributionTable	1.3.6.1.4.1.343.2.10.7.12.1		not-accessible
NUM a2ContributionTableIndex	1.3.6.1.4.1.343.2.10.7.12.1.1	DmiInteger	read-only	The index to identify each entry in the Server Health Contributi n table
STR a2Component	1.3.6.1.4.1.343.2.10.7.12.1.2	DmiDisplaystring	read-only	the contributing component name
STR a2Group	1.3.6.1.4.1.343.2.10.7.12.1.3	DmiDisplaystring	read-only	The class name of the group that may contribute to the decision of the server health
INT a2StatusStore	1.3.6.1.4.1.343.2.10.7.12.1.4	INTEGER	read-only	The flag to indicate where the health status attribute is stored. The health status for the instance of this group can be stored in one of the following groups: 1. locally in the same group; 2. in the operational state group Current Error Status attribute for DMTF group; 3. in the Error Control group Error Status attribute for Intel group.
NUM a2LocalIndexAttributeIdToStoreGroup	1.3.6.1.4.1.343.2.10.7.12.1.5	DmiInteger	read-only	The id of the contributing group's attribute that stores the instance of the Operational State group table or the Error Control Group table. This instance stores the health status.If the health status is stored locally in the contributing group, this value will be set to zero
NUM a2HealthAttributeId	1.3.6.1.4.1.343.2.10.7.12.1.6	DmiInteger	read-only	The id of the attribute to check for health. This attribute locates in the group that is indicated in the Status Store attribute. If this is a local attribute, it should have the same type as the the operational status group Current Error Status attribute. In this case, the attribute value will have a one to one mapping to the health status type. If not the same type, the value of this attribute is 0. If this is the Error Control group Error Status attribute, the Health Agent will map OK value to OK s
INT a2Contribution	1.3.6.1.4.1.343.2.10.7.12.1.7	INTEGER	read-write	Is this group going to contribute to the decision of the server health? 1 for Yes, 0 for No
INT a2UpdateThroughPolling	1.3.6.1.4.1.343.2.10.7.12.1.8	INTEGER	read-write	This attribute is a boolean indicating if the Server Health Agent should update the health status of this group through polling in addition to DMI indication. If not through polling, the updatewill be done through DMI indication only. The value 1 means Yes, 0 means No. By default, the polling is turned off.
tServerHealthFilterTable	1.3.6.1.4.1.343.2.10.7.13		not-accessible	the (component, group) that will not contribute to the server health.
eServerHealthFilterTable	1.3.6.1.4.1.343.2.10.7.13.1		not-accessible
NUM a3FilterTableIndex	1.3.6.1.4.1.343.2.10.7.13.1.1	DmiInteger	read-only	The index to identify each entry in the Server Health Filter table
STR a3Component	1.3.6.1.4.1.343.2.10.7.13.1.2	DmiDisplaystring	read-only	the filter's component name
STR a3Group	1.3.6.1.4.1.343.2.10.7.13.1.3	DmiDisplaystring	read-only	the filter's group class string. If the value is *, all groups of this component will be filtered.
tServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14		not-accessible	Status of server wellness.
tServerHealthStatusTraps	1.3.6.1.4.1.343.2.10.7.14.0
NTF notification1ForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14.0.4			Server OK
NTF notification2ForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14.0.8			Server Non-Critical
NTF notification3ForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14.0.16			Server Critical
NTF notification4ForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14.0.32			Server Non-Recoverable
NTF notification5ForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14.0.48			Server Health Detail Changed
NTF notification6ForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14.0.64			Server Health Detail Refresh
eServerHealthStatus	1.3.6.1.4.1.343.2.10.7.14.1		not-accessible
INT a4Status	1.3.6.1.4.1.343.2.10.7.14.1.1	INTEGER	read-only	This attribute indicates whether the server is healthy or not. Its type is an enumeration. For application which doesn't support DMI enumeration type, it can use the next attribute, Status in Integer, which stores the status in integer form
NUM a4StatusInInteger	1.3.6.1.4.1.343.2.10.7.14.1.2	DmiInteger	read-only	This attribute indicates whether the server is healthy or not. Since this instrumentation needs to support LDSM DCA which doesn't support enum type, the attribute type here is integer with the following meaning: 0x001 - Other 0x002 - Unknown 0x004 - OK 0x008 - Non-Critical 0x010 - Critical 0x020 - Non-Recoverable
NUM a4PollInterval	1.3.6.1.4.1.343.2.10.7.14.1.3	DmiInteger	read-write	This attribute is the Server Health Agent's polling interval of those CI group's status when the Update Through Polling attribute in the Server Health Contribution group is set to true for those groups. The unit of this attribute is in minute
tServerHealthDetail	1.3.6.1.4.1.343.2.10.7.15		not-accessible	the health detail of server. This group consists of a table of row with information on the associated unhealthy group, instance, associated attribute, and status of that attribute
eServerHealthDetail	1.3.6.1.4.1.343.2.10.7.15.1		not-accessible
NUM a6HealthInstanceIndex	1.3.6.1.4.1.343.2.10.7.15.1.1	DmiInteger	read-only	The index to identify each entry in the Server Health Detail table
STR a6Component	1.3.6.1.4.1.343.2.10.7.15.1.2	DmiDisplaystring	read-only	The name of the unhealthy component that is associated
STR a6Group	1.3.6.1.4.1.343.2.10.7.15.1.3	DmiDisplaystring	read-only	The class name of the unhealthy group that is associated
STR a6InstancePath	1.3.6.1.4.1.343.2.10.7.15.1.4	DmiDisplaystring	read-only	The path to uniquely identifies the unhealthy instance that cause the error. The format for non scalar group is: componentID\|groupID\|attribu eID1=attributeValue+...+attributeIDn=attributeValue where attributeID1,...,a tributeIDn are the attributes that form the key to the group. For example, to uniquely identify the baseboard component, Physical Container Global Table group, Container Index attribute with value 1, the string to represent this instance is 7\|64\|9='1' For example, to uniquely identify
NUM a6LastEventType	1.3.6.1.4.1.343.2.10.7.15.1.5	DmiInteger	read-only	The type of last event that causes the unhealthy condition. The attribute type value zero means UNKONWN
INT a6Status	1.3.6.1.4.1.343.2.10.7.15.1.6	INTEGER	read-only	This attribute indicates the status of this unhealthy instance.
tEventGenerationForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.100		not-accessible
eEventGenerationForServerHealthStatus	1.3.6.1.4.1.343.2.10.7.100.1		not-accessible
INT a5EventType	1.3.6.1.4.1.343.2.10.7.100.1.1	INTEGER	read-only	The type of event that has occurred.
INT a5EventSeverity	1.3.6.1.4.1.343.2.10.7.100.1.2	INTEGER	read-only	The severity of this event.
INT a5IsEventState_based	1.3.6.1.4.1.343.2.10.7.100.1.3	INTEGER	read-only	The value of this attributedetermines whether the Event being reportedis a state-based Event or not. If the valueof this attribute is TRUE then the Event isstate-based. Otherwise the Event is notstate-based.
NUM a5EventStateKey	1.3.6.1.4.1.343.2.10.7.100.1.4	DmiInteger	read-only	A unique, single integer key into the EventState group if this is a state-based Event.If this is not a state-based Event then thisthis attribute's value is not defined.
STR a5AssociatedGroup	1.3.6.1.4.1.343.2.10.7.100.1.5	DmiDisplaystring	read-only	The class name of the group that is associatedwith the events defined in this EventGeneration group.
INT a5EventSystem	1.3.6.1.4.1.343.2.10.7.100.1.6	INTEGER	read-only	The major functional aspect of the productcausing the fault.
INT a5EventSubsystem	1.3.6.1.4.1.343.2.10.7.100.1.7	INTEGER	read-only	The minor functional aspect of the productcausing the fault.
INT a5IsInstanceDataPresent	1.3.6.1.4.1.343.2.10.7.100.1.9	INTEGER	read-only	Indicates whether the second event block containsinstance-specif c data.
STR a5EventMessage	1.3.6.1.4.1.343.2.10.7.100.1.10	DmiDisplaystring	read-only	Auxillary information releated to the eventThis text contains the name of the Probe

RFC description

Intel vendor-private MIB for server health and system monitoring, defines health status and diagnostic objects for Intel servers.

Start monitoring Intel server platform/motherboard (health attribute mapper) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTELCORPORATIONSERVERHEALTHMAPPER-MIB

What Is INTELCORPORATIONSERVERHEALTHMAPPER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description